Marshall Dawson has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37220 )
Change subject: soc/amd/stoneyidge: Use USE_AMD_BLOBS to remove default paths ......................................................................
soc/amd/stoneyidge: Use USE_AMD_BLOBS to remove default paths
Remove default path/to/file strings when USE_AMD_BLOBS is not enabled. This will result in a buildable, but not runable image, in the default configuration.
Drop the check for HAVE_MERLINFALCON_BINARIES in the path default. A later patch will address the poor use of this symbol
All PSP blobs are still assumed to be in the same directory as the AMD public key. Qualify building the amdfw.rom intermediate image and including it into coreboot.rom on whether the public key remains "". This change infers it's OK to skip xHCI and GEC firmware too, although the images normally reside in a separate directory.
This change only determines whether default paths and names exist. Paths will be updated in a follow-on patch.
Change-Id: Ic21fbd7a58b340a9bcaaea456e1f38b567215b81 Signed-off-by: Marshall Dawson marshalldawson3rd@gmail.com --- M src/soc/amd/stoneyridge/Kconfig M src/soc/amd/stoneyridge/Makefile.inc 2 files changed, 20 insertions(+), 9 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/20/37220/1
diff --git a/src/soc/amd/stoneyridge/Kconfig b/src/soc/amd/stoneyridge/Kconfig index b55833d..c477e03 100644 --- a/src/soc/amd/stoneyridge/Kconfig +++ b/src/soc/amd/stoneyridge/Kconfig @@ -176,7 +176,8 @@
config VGA_BIOS_FILE string - default "3rdparty/blobs/soc/amd/merlinfalcon/VBIOS.bin" if AMD_APU_MERLINFALCON && HAVE_MERLINFALCON_BINARIES + default "" if !USE_AMD_BLOBS + default "3rdparty/blobs/soc/amd/merlinfalcon/VBIOS.bin" if AMD_APU_MERLINFALCON default "3rdparty/blobs/soc/amd/stoneyridge/VBIOS.bin"
config S3_VGA_ROM_RUN @@ -216,6 +217,7 @@
config STONEYRIDGE_XHCI_FWM_FILE string "XHCI firmware path and filename" + default "" if !USE_AMD_BLOBS default "3rdparty/blobs/soc/amd/stoneyridge/xhci.bin" depends on STONEYRIDGE_XHCI_FWM
@@ -225,7 +227,8 @@
config AMD_PUBKEY_FILE string "AMD public Key" - default "3rdparty/blobs/soc/amd/merlinfalcon/PSP/AmdPubKeyCZ.bin" if AMD_APU_MERLINFALCON && HAVE_MERLINFALCON_BINARIES + default "" if !USE_AMD_BLOBS + default "3rdparty/blobs/soc/amd/merlinfalcon/PSP/AmdPubKeyCZ.bin" if AMD_APU_MERLINFALCON default "3rdparty/blobs/soc/amd/stoneyridge/PSP/AmdPubKeyST.bin"
config STONEYRIDGE_SATA_MODE diff --git a/src/soc/amd/stoneyridge/Makefile.inc b/src/soc/amd/stoneyridge/Makefile.inc index f697fc2..d2d64c8 100644 --- a/src/soc/amd/stoneyridge/Makefile.inc +++ b/src/soc/amd/stoneyridge/Makefile.inc @@ -137,20 +137,15 @@
### 0 FIRMWARE_LOCATE=$(dir $(call strip_quotes, $(CONFIG_AMD_PUBKEY_FILE))) +ifneq ($(FIRMWARE_LOCATE),)
ifeq ($(CONFIG_AMD_APU_STONEYRIDGE),y) FIRMWARE_TYPE=ST else - ifeq ($(CONFIG_AMD_APU_MERLINFALCON),y) -# If Merlin Falcon, but blobs aren't present, use Stoney Ridge instead -ifeq ($(CONFIG_HAVE_MERLINFALCON_BINARIES),y) FIRMWARE_TYPE=CZ else -FIRMWARE_TYPE=ST -endif # CONFIG_HAVE_MERLINFALCON_BINARIES -else -$(error stoneyridge: Unknown FIRMWARE_TYPE) +$(error soc/amd/stoneyridge: Unusable FIRMWARE_TYPE)
endif # CONFIG_AMD_APU_MERLINFALCON endif # CONFIG_AMD_APU_STONEYRIDGE @@ -332,4 +327,17 @@
endif # ifeq ($(CONFIG_SOC_AMD_PSP_SELECTABLE_SMU_FW),y)
+else # ifneq ($(FIRMWARE_LOCATE),) + +warn_no_amdfw: + printf "\n\t** WARNING **\n" + printf "coreboot has been built with no PSP firmware and " + printf "a non-booting image has been generated.\n\n" + +PHONY+=warn_no_amdfw + +files_added:: warn_no_amdfw + +endif # ifneq ($(FIRMWARE_LOCATE),) + endif # ($(CONFIG_SOC_AMD_MERLINFALCON)$(CONFIG_SOC_AMD_STONEYRIDGE_FP4)$(CONFIG_SOC_AMD_STONEYRIDGE_FT4),y)