[coreboot-gerrit] Change in coreboot[master]: cpu/intel/model_2065x/model_2065x_init.c: Drop dead code

[Angel Pons (Code Review)]

Angel Pons has submitted this change. ( https://review.coreboot.org/c/coreboot/+/43208 )

Change subject: cpu/intel/model_2065x/model_2065x_init.c: Drop dead code
......................................................................

cpu/intel/model_2065x/model_2065x_init.c: Drop dead code

This code is not even being build-tested. Drop it before it grows moss.

Change-Id: I16fe12368ce7ffe2fd4d2a5580dd92c19a695848
Signed-off-by: Angel Pons 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43208
Tested-by: build bot (Jenkins) 
Reviewed-by: Michael Niewöhner
---
M src/cpu/intel/model_2065x/model_2065x_init.c
1 file changed, 0 insertions(+), 26 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Michael Niewöhner: Looks good to me, approved

diff --git a/src/cpu/intel/model_2065x/model_2065x_init.c b/src/cpu/intel/model_2065x/model_2065x_init.c
index 6f41ac5..3208e10 100644
--- a/src/cpu/intel/model_2065x/model_2065x_init.c
+++ b/src/cpu/intel/model_2065x/model_2065x_init.c
@@ -147,13 +147,6 @@
    msr.lo = 0;
    msr.hi = 0;
    wrmsr(IA32_THERM_INTERRUPT, msr);
-
-#ifdef DISABLED
-	/* Enable package critical interrupt only */
-	msr.lo = 1 << 4;
-	msr.hi = 0;
-	wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
-#endif
 }

static void enable_lapic_tpr(void)
@@ -188,22 +181,6 @@
           ((perf_ctl.lo >> 8) & 0xff) * IRONLAKE_BCLK);
 }

-static void set_energy_perf_bias(u8 policy)
-{
-#ifdef DISABLED
-	msr_t msr;
-
-	/* Energy Policy is bits 3:0 */
-	msr = rdmsr(IA32_ENERGY_PERF_BIAS);
-	msr.lo &= ~0xf;
-	msr.lo |= policy & 0xf;
-	wrmsr(IA32_ENERGY_PERF_BIAS, msr);
-
-	printk(BIOS_DEBUG, "model_x06ax: energy policy set to %u\n",
-	       policy);
-#endif
-}
-
 static void configure_mca(void)
 {
    msr_t msr;
@@ -247,9 +224,6 @@
    /* Thermal throttle activation offset */
    configure_thermal_target();

-	/* Set energy policy */
-	set_energy_perf_bias(ENERGY_POLICY_NORMAL);
-
    /* Set Max Ratio */
    set_max_ratio();