Vladimir Serbinenko (phcoder@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7062
-gerrit
commit 2b01d68fcb86612390354f159919cfd7a48657aa Author: Vladimir Serbinenko phcoder@gmail.com Date: Wed Oct 15 20:17:51 2014 +0200
i945: consolidate sb & nb early inits
Change-Id: I00c2c725de5b982a5e4f584b77b09017a5bc0a72 Signed-off-by: Vladimir Serbinenko phcoder@gmail.com --- src/mainboard/apple/macbook21/romstage.c | 69 ++---------------------------- src/mainboard/getac/p470/romstage.c | 48 ++------------------- src/mainboard/ibase/mb899/romstage.c | 51 ++-------------------- src/mainboard/intel/d945gclf/romstage.c | 48 ++------------------- src/mainboard/kontron/986lcd-m/romstage.c | 50 ++-------------------- src/mainboard/lenovo/t60/romstage.c | 50 +++------------------- src/mainboard/lenovo/x60/romstage.c | 50 ++-------------------- src/mainboard/roda/rk886ex/romstage.c | 48 ++------------------- src/northbridge/intel/i945/early_init.c | 52 +++++++++++++++++++++- src/northbridge/intel/i945/i945.h | 2 +- src/southbridge/intel/i82801gx/early_lpc.c | 26 +++++++++++ src/southbridge/intel/i82801gx/i82801gx.h | 1 + 12 files changed, 112 insertions(+), 383 deletions(-)
diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c index e7ff902..7bec26b 100644 --- a/src/mainboard/apple/macbook21/romstage.c +++ b/src/mainboard/apple/macbook21/romstage.c @@ -286,12 +286,9 @@ static void early_ich7_init(void)
void main(unsigned long bist) { - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; + int s3resume = 0; const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x51, 0x52, 0x53 };
- timestamp_init(get_initial_timestamp()); timestamp_add_now(TS_START_ROMSTAGE);
@@ -324,22 +321,7 @@ void main(unsigned long bist) */ i945_early_initialization();
- /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { -#if CONFIG_HAVE_ACPI_RESUME - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - -#else - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); -#endif - } + s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */ enable_smbus(); @@ -349,7 +331,7 @@ void main(unsigned long bist) #endif
timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(boot_mode, spd_addrmap); + sdram_initialize(s3resume ? 2 : 0, spd_addrmap); timestamp_add_now(TS_AFTER_INITRAM);
/* Perform some initialization that must run before stage2 */ @@ -364,50 +346,7 @@ void main(unsigned long bist) fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - -#if !CONFIG_HAVE_ACPI_RESUME -#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 -#if CONFIG_DEBUG_RAM_SETUP - sdram_dump_mchbar_registers(); - - { - /* This will not work if TSEG is in place! */ - u32 tom = pci_read_config32(PCI_DEV(0, 2, 0), 0x5c); - - printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom); - ram_check(0x00000000, 0x000a0000); - ram_check(0x00100000, tom); - } -#endif -#endif -#endif - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, - HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, - SKPAD_ACPI_S3_MAGIC); - } -#endif + i945_late_initialization(s3resume);
timestamp_add_now(TS_END_ROMSTAGE);
diff --git a/src/mainboard/getac/p470/romstage.c b/src/mainboard/getac/p470/romstage.c index 3dab527..ccfb076 100644 --- a/src/mainboard/getac/p470/romstage.c +++ b/src/mainboard/getac/p470/romstage.c @@ -268,9 +268,7 @@ static void early_ich7_init(void) #include <cpu/intel/romstage.h> void main(unsigned long bist) { - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; + int s3resume = 0;
if (bist == 0) enable_lapic(); @@ -302,21 +300,7 @@ void main(unsigned long bist) */ i945_early_initialization();
- /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } + s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */ enable_smbus(); @@ -325,7 +309,7 @@ void main(unsigned long bist) dump_spd_registers(); #endif
- sdram_initialize(boot_mode, NULL); + sdram_initialize(s3resume ? 2 : 0, NULL);
/* Perform some initialization that must run before stage2 */ early_ich7_init(); @@ -339,29 +323,5 @@ void main(unsigned long bist) fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); - } -#endif + i945_late_initialization(s3resume); } diff --git a/src/mainboard/ibase/mb899/romstage.c b/src/mainboard/ibase/mb899/romstage.c index 322907b..2a81921 100644 --- a/src/mainboard/ibase/mb899/romstage.c +++ b/src/mainboard/ibase/mb899/romstage.c @@ -226,9 +226,7 @@ static void early_ich7_init(void) #include <cpu/intel/romstage.h> void main(unsigned long bist) { - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; + int s3resume = 0;
if (bist == 0) enable_lapic(); @@ -253,21 +251,7 @@ void main(unsigned long bist) */ i945_early_initialization();
- /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } + s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */ enable_smbus(); @@ -276,7 +260,7 @@ void main(unsigned long bist) dump_spd_registers(); #endif
- sdram_initialize(boot_mode, NULL); + sdram_initialize(s3resume ? 2 : 0, NULL);
/* Perform some initialization that must run before stage2 */ early_ich7_init(); @@ -290,32 +274,5 @@ void main(unsigned long bist) fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - - quick_ram_check(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); - } -#endif + i945_late_initialization(s3resume); } diff --git a/src/mainboard/intel/d945gclf/romstage.c b/src/mainboard/intel/d945gclf/romstage.c index 0c48247..4508968 100644 --- a/src/mainboard/intel/d945gclf/romstage.c +++ b/src/mainboard/intel/d945gclf/romstage.c @@ -159,9 +159,7 @@ static void early_ich7_init(void) #include <cpu/intel/romstage.h> void main(unsigned long bist) { - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; + int s3resume = 0, boot_mode = 0;
if (bist == 0) enable_lapic(); @@ -187,21 +185,7 @@ void main(unsigned long bist) */ i945_early_initialization();
- /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } + s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */ enable_smbus(); @@ -210,7 +194,7 @@ void main(unsigned long bist) dump_spd_registers(); #endif
- sdram_initialize(boot_mode, NULL); + sdram_initialize(s3resume ? 2 : boot_mode, NULL);
/* Perform some initialization that must run before stage2 */ early_ich7_init(); @@ -224,29 +208,5 @@ void main(unsigned long bist) fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); - } -#endif + i945_late_initialization(s3resume); } diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c index 2c12c5d..2c89e6c 100644 --- a/src/mainboard/kontron/986lcd-m/romstage.c +++ b/src/mainboard/kontron/986lcd-m/romstage.c @@ -332,9 +332,7 @@ static void early_ich7_init(void) #include <cpu/intel/romstage.h> void main(unsigned long bist) { - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; + int s3resume = 0;
if (bist == 0) enable_lapic(); @@ -364,21 +362,7 @@ void main(unsigned long bist) */ i945_early_initialization();
- /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } + s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */ enable_smbus(); @@ -387,7 +371,7 @@ void main(unsigned long bist) dump_spd_registers(); #endif
- sdram_initialize(boot_mode, NULL); + sdram_initialize(s3resume ? 2 : 0, NULL);
/* Perform some initialization that must run before stage2 */ early_ich7_init(); @@ -401,31 +385,5 @@ void main(unsigned long bist) fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - quick_ram_check(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); - } -#endif + i945_late_initialization(s3resume); } diff --git a/src/mainboard/lenovo/t60/romstage.c b/src/mainboard/lenovo/t60/romstage.c index f11b33e..f0ebcbc 100644 --- a/src/mainboard/lenovo/t60/romstage.c +++ b/src/mainboard/lenovo/t60/romstage.c @@ -209,9 +209,8 @@ static void early_ich7_init(void) #include <cpu/intel/romstage.h> void main(unsigned long bist) { - u32 reg32; - int boot_mode = 0, dock_err; - int cbmem_was_initted; + int s3resume = 0; + int dock_err; const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x52, 0x51, 0x53 };
@@ -262,21 +261,7 @@ void main(unsigned long bist) */ i945_early_initialization();
- /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } + s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */ enable_smbus(); @@ -286,7 +271,7 @@ void main(unsigned long bist) #endif
timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(boot_mode, spd_addrmap); + sdram_initialize(s3resume ? 2 : 0, spd_addrmap); timestamp_add_now(TS_AFTER_INITRAM);
/* Perform some initialization that must run before stage2 */ @@ -301,32 +286,7 @@ void main(unsigned long bist) fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); - } -#endif + i945_late_initialization(s3resume);
timestamp_add_now(TS_END_ROMSTAGE); - } diff --git a/src/mainboard/lenovo/x60/romstage.c b/src/mainboard/lenovo/x60/romstage.c index 943143a..1310b33 100644 --- a/src/mainboard/lenovo/x60/romstage.c +++ b/src/mainboard/lenovo/x60/romstage.c @@ -216,9 +216,7 @@ static void early_ich7_init(void) #include <cpu/intel/romstage.h> void main(unsigned long bist) { - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; + int s3resume = 0; const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x52, 0x51, 0x53 };
@@ -264,21 +262,7 @@ void main(unsigned long bist) */ i945_early_initialization();
- /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } + s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */ enable_smbus(); @@ -288,7 +272,7 @@ void main(unsigned long bist) #endif
timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(boot_mode, spd_addrmap); + sdram_initialize(s3resume ? 2 : 0, spd_addrmap); timestamp_add_now(TS_AFTER_INITRAM);
/* Perform some initialization that must run before stage2 */ @@ -303,33 +287,7 @@ void main(unsigned long bist) fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, - HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, - SKPAD_ACPI_S3_MAGIC); - } -#endif + i945_late_initialization(s3resume);
timestamp_add_now(TS_END_ROMSTAGE);
diff --git a/src/mainboard/roda/rk886ex/romstage.c b/src/mainboard/roda/rk886ex/romstage.c index 7cc1a1d..071fa2a 100644 --- a/src/mainboard/roda/rk886ex/romstage.c +++ b/src/mainboard/roda/rk886ex/romstage.c @@ -254,9 +254,7 @@ static void init_artec_dongle(void) #include <cpu/intel/romstage.h> void main(unsigned long bist) { - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; + int s3resume = 0;
if (bist == 0) enable_lapic(); @@ -289,21 +287,7 @@ void main(unsigned long bist) /* This has to happen after i945_early_initialization() */ init_artec_dongle();
- /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } + s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */ enable_smbus(); @@ -312,7 +296,7 @@ void main(unsigned long bist) dump_spd_registers(); #endif
- sdram_initialize(boot_mode, NULL); + sdram_initialize(s3resume ? 2 : 0, NULL);
/* Perform some initialization that must run before stage2 */ early_ich7_init(); @@ -326,29 +310,5 @@ void main(unsigned long bist) fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); - } -#endif + i945_late_initialization(s3resume); } diff --git a/src/northbridge/intel/i945/early_init.c b/src/northbridge/intel/i945/early_init.c index 24054bd..1715c47 100644 --- a/src/northbridge/intel/i945/early_init.c +++ b/src/northbridge/intel/i945/early_init.c @@ -22,6 +22,8 @@ #include <console/console.h> #include <arch/io.h> #include <device/pci_def.h> +#include <cbmem.h> +#include <string.h> #include "i945.h"
int i945_silicon_revision(void) @@ -887,7 +889,34 @@ void i945_early_initialization(void) RCBA32(0x2010) |= (1 << 10); }
-void i945_late_initialization(void) +static void i945_prepare_resume(int s3resume) +{ + int cbmem_was_initted; + + cbmem_was_initted = !cbmem_recovery(s3resume); + + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + if (s3resume && cbmem_was_initted) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + + /* copy 1MB - 64K to high tables ram_base to prevent memory corruption + * through stage 2. We could keep stuff like stack and heap in high tables + * memory completely, but that's a wonderful clean up task for another + * day. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, + HIGH_MEMORY_SAVE); + + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, + SKPAD_ACPI_S3_MAGIC); + } +} + +void i945_late_initialization(int s3resume) { i945_setup_egress_port();
@@ -902,4 +931,25 @@ void i945_late_initialization(void) i945_setup_pci_express_x16();
i945_setup_root_complex_topology(); + +#if !CONFIG_HAVE_ACPI_RESUME +#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 +#if CONFIG_DEBUG_RAM_SETUP + sdram_dump_mchbar_registers(); + + { + /* This will not work if TSEG is in place! */ + u32 tom = pci_read_config32(PCI_DEV(0, 2, 0), 0x5c); + + printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom); + ram_check(0x00000000, 0x000a0000); + ram_check(0x00100000, tom); + } +#endif +#endif +#endif + + MCHBAR16(SSKPD) = 0xCAFE; + + i945_prepare_resume(s3resume); } diff --git a/src/northbridge/intel/i945/i945.h b/src/northbridge/intel/i945/i945.h index 9be9379..8573b0c 100644 --- a/src/northbridge/intel/i945/i945.h +++ b/src/northbridge/intel/i945/i945.h @@ -350,7 +350,7 @@ static inline void barrier(void) { asm("" ::: "memory"); }
int i945_silicon_revision(void); void i945_early_initialization(void); -void i945_late_initialization(void); +void i945_late_initialization(int s3resume);
/* provided by mainboard code */ void setup_ich7_gpios(void); diff --git a/src/southbridge/intel/i82801gx/early_lpc.c b/src/southbridge/intel/i82801gx/early_lpc.c index 9f80d41..69bbfb2 100644 --- a/src/southbridge/intel/i82801gx/early_lpc.c +++ b/src/southbridge/intel/i82801gx/early_lpc.c @@ -20,6 +20,9 @@
#include <arch/io.h> #include <timestamp.h> +#include <console/console.h> +#include <arch/acpi.h> +#include "i82801gx.h"
#if CONFIG_COLLECT_TIMESTAMPS tsc_t get_initial_timestamp(void) @@ -31,3 +34,26 @@ tsc_t get_initial_timestamp(void) return base_time; } #endif + +int southbridge_detect_s3_resume(void) +{ + u32 reg32; + + /* Read PM1_CNT */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); + if (((reg32 >> 10) & 7) == 5) { + if (acpi_s3_resume_allowed()) { + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + return 1; + } else { + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); + } + } + + return 0; +} diff --git a/src/southbridge/intel/i82801gx/i82801gx.h b/src/southbridge/intel/i82801gx/i82801gx.h index 1064dde..ee13b7d 100644 --- a/src/southbridge/intel/i82801gx/i82801gx.h +++ b/src/southbridge/intel/i82801gx/i82801gx.h @@ -44,6 +44,7 @@ extern void i82801gx_enable(device_t dev); #else void enable_smbus(void); int smbus_read_byte(unsigned device, unsigned address); +int southbridge_detect_s3_resume(void); #endif #endif