Aamir Bohra has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/33060
Change subject: mb/google/hatch: Remove unused USB2 port5 from baseboard devicetree ......................................................................
mb/google/hatch: Remove unused USB2 port5 from baseboard devicetree
Hatch newer board revision do not use USB port5 for discrete BT. Hence remove the port configuration and UBS2 P5 asl entry. The older board version would continue to use USB2 P5 hence moved the entry to overridetree.cb
Change-Id: I98297d6b81e3184b7b0a14710f3790f5df30d68b Signed-off-by: Aamir Bohra aamir.bohra@intel.com --- M src/mainboard/google/hatch/variants/baseboard/devicetree.cb M src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb 2 files changed, 104 insertions(+), 9 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/60/33060/1
diff --git a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb index 9d10cac..0bbb17d 100644 --- a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb @@ -56,12 +56,12 @@ register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port 1 register "usb2_ports[2]" = "USB2_PORT_SHORT(OC3)" # Type-A Port 0 register "usb2_ports[3]" = "USB2_PORT_LONG(OC3)" # Type-A Port 1 - register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # BT + register "usb2_ports[4]" = "USB2_PORT_EMPTY" register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # WWAN register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" # Camera register "usb2_ports[7]" = "USB2_PORT_EMPTY" register "usb2_ports[8]" = "USB2_PORT_EMPTY" - register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # CnVi BT + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # BT
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 0 register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 @@ -141,12 +141,6 @@ device usb 2.3 on end end chip drivers/usb/acpi - register "desc" = ""Discrete bluetooth"" - register "type" = "UPC_TYPE_INTERNAL" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" - device usb 2.4 on end - end - chip drivers/usb/acpi register "desc" = ""WWAN"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.5 on end @@ -157,7 +151,7 @@ device usb 2.6 on end end chip drivers/usb/acpi - register "desc" = ""Integrated CnVi bluetooth"" + register "desc" = ""Bluetooth"" register "type" = "UPC_TYPE_INTERNAL" register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" device usb 2.9 on end diff --git a/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb b/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb index eec7880..d70413b 100644 --- a/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb +++ b/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb @@ -32,7 +32,108 @@ # GPIO for SD card detect register "sdcard_cd_gpio" = "vSD3_CD_B"
+ register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port 0 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port 1 + register "usb2_ports[2]" = "USB2_PORT_SHORT(OC3)" # Type-A Port 0 + register "usb2_ports[3]" = "USB2_PORT_LONG(OC3)" # Type-A Port 1 + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # BT + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # WWAN + register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" # Camera + register "usb2_ports[7]" = "USB2_PORT_EMPTY" + register "usb2_ports[8]" = "USB2_PORT_EMPTY" + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # CnVi BT + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 0 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 0 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 1 + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # WWAN + register "usb3_ports[5]" = "USB3_PORT_EMPTY" + device domain 0 on + device pci 14.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""Left Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-C Port 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port 1"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""Discrete bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.5 on end + end + chip drivers/usb/acpi + register "desc" = ""Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.6 on end + end + chip drivers/usb/acpi + register "desc" = ""Integrated CnVi bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" + device usb 2.9 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-C Port"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-C Port 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""Right Type-A Port 1"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.4 on end + end + end + end + end # USB xHCI device pci 15.0 on chip drivers/i2c/generic register "hid" = ""ELAN0000""