[coreboot-gerrit] New patch to review for coreboot: southbridge/amd/sb800: transition away from device_t

[Antonello Dettori]

Antonello Dettori ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16480

-gerrit

commit d04154215a2cd8d5f00239b59ea1328f30006dd0
Author: Antonello Dettori 
Date:   Sat Sep 3 10:45:33 2016 +0200

southbridge/amd/sb800: transition away from device_t

Replace the use of the old device_t definition inside
    southbridge/amd/sb800.

Change-Id: I488cde4504128331106f50b34869905e30f5ab83
    Signed-off-by: Antonello Dettori 
---
 src/southbridge/amd/sb800/early_setup.c | 14 +++++++-------
 src/southbridge/amd/sb800/sb800.h       |  3 +++
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c
index ac06917..070c1f5 100644
--- a/src/southbridge/amd/sb800/early_setup.c
+++ b/src/southbridge/amd/sb800/early_setup.c
@@ -73,7 +73,7 @@ static void sb800_acpi_init(void)
 /* RPR 2.28 Get SB ASIC Revision.*/
 static u8 get_sb800_revision(void)
 {
-	device_t dev;
+	pci_devfn_t dev;
    u8 rev_id;
    u8 rev = 0;

@@ -123,7 +123,7 @@ void sb800_clk_output_48Mhz(void)
 static void sb800_lpc_init(void)
 {
    u8 reg8;
-	device_t dev;
+	pci_devfn_t dev;

//dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0);	/* SMBUS controller */
    dev = PCI_DEV(0, 0x14, 0);
@@ -166,7 +166,7 @@ static void sb800_lpc_init(void)
 /* what is its usage? */
 static u32 get_sbdn(u32 bus)
 {
-	device_t dev;
+	pci_devfn_t dev;

/* Find the device. */
    dev = PCI_DEV(bus, 0x14, 0);//pci_locate_device_on_bus(PCI_ID(0x1002, 0x4385), bus);
@@ -238,7 +238,7 @@ void soft_reset(void)
 void sb800_pci_port80(void)
 {
    u8 byte;
-	device_t dev;
+	pci_devfn_t dev;

/* P2P Bridge */
    dev = PCI_DEV(0, 0x14, 4);//pci_locate_device(PCI_ID(0x1002, 0x4384), 0);
@@ -344,7 +344,7 @@ struct pm_entry const pm_table[] =
 void sb800_lpc_port80(void)
 {
    u8 byte;
-	device_t dev;
+	pci_devfn_t dev;

/* Enable LPC controller */
    byte = pmio_read(0xEC);
@@ -361,7 +361,7 @@ void sb800_lpc_port80(void)
 /* sbDevicesPorInitTable */
 static void sb800_devices_por_init(void)
 {
-	device_t dev;
+	pci_devfn_t dev;
    u8 byte;

printk(BIOS_INFO, "sb800_devices_por_init()\n");
@@ -543,7 +543,7 @@ static void sb800_pmio_por_init(void)
 */
 static void sb800_pci_cfg(void)
 {
-	device_t dev;
+	pci_devfn_t dev;
    u8 byte;

/* SMBus Device, BDF:0-20-0 */
diff --git a/src/southbridge/amd/sb800/sb800.h b/src/southbridge/amd/sb800/sb800.h
index 6a037cf..b36d9bf 100644
--- a/src/southbridge/amd/sb800/sb800.h
+++ b/src/southbridge/amd/sb800/sb800.h
@@ -42,7 +42,10 @@ void pm_iowrite(u8 reg, u8 value);
 u8 pm_ioread(u8 reg);
 void pm2_iowrite(u8 reg, u8 value);
 u8 pm2_ioread(u8 reg);
+
+#ifndef __SIMPLE_DEVICE__
 void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val);
+#endif

#define REV_SB800_A11	0x11
 #define REV_SB800_A12	0x12