[coreboot-gerrit] Change in coreboot[master]: mb/ocp/deltalake: select PMC support on deltalake

[Tim Chu (Code Review)]

Tim Chu has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/42963 )

Change subject: mb/ocp/deltalake: select PMC support on deltalake
......................................................................

mb/ocp/deltalake: select PMC support on deltalake

Enable PMC support on Deltalake and change the state to S5 state
when power is reapplied after power failure.

TEST=build for Deltalake and enable
CONFIG_POWER_STATE_OFF_AFTER_FAILURE in config table to override
POWER_STATE_DEFAULT_ON_AFTER_FAILURE which is select in
soc/intel/common/block/pmc/Kconfig

Boot the system and check the last bit of GEN_PMCON_B is set to 1
through ITP with command: pch.pm_dump

Signed-off-by: Tim Chu 
Change-Id: I35c029c0aa4b91aa5d5f168daea05a6217d42f81
---
M src/mainboard/ocp/deltalake/Kconfig
1 file changed, 4 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/42963/1

diff --git a/src/mainboard/ocp/deltalake/Kconfig b/src/mainboard/ocp/deltalake/Kconfig
index 0f693d2..2a195a1 100644
--- a/src/mainboard/ocp/deltalake/Kconfig
+++ b/src/mainboard/ocp/deltalake/Kconfig
@@ -12,6 +12,10 @@
    select IPMI_KCS_ROMSTAGE
    select IPMI_OCP
    select OCP_DMI
+	select REG_SCRIPT
+	select SOC_INTEL_COMMON_BLOCK_PMC
+	select ACPI_INTEL_HARDWARE_SLEEP_VALUES
+        select CPU_INTEL_COMMON_SMM

config IPMI_KCS_REGISTER_SPACING
    int