Hello build bot (Jenkins), Furquan Shaikh, Wonkyu Kim, Caveh Jalali, Duncan Laurie, Angel Pons, Nick Vaccaro, Sukumar Ghorai, Raj Astekar, Shreesh Chhabbi,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/43992
to look at the new patch set (#5).
Change subject: mainboard/intel/tgl: Customize PCH VR settings for better Sx power savings ......................................................................
mainboard/intel/tgl: Customize PCH VR settings for better Sx power savings
v1p05 and vnn power rails can be used as an alternative source by-passing vccin_aux during Sx. This by-pass feature, enables us to shutdown vccin_aux rail which is higher voltage rail compared to v1p05 and vnn. Both of these rails were disabled by default in FSP. Changes in this patch are:
1. v1p05 and vnn rails are enabled and enabled supported voltage types in S0i1, S0i2, S0i3, S3, S4, S5 states. They were disabled by default.
2. Icc Max for v1p05 changed to 500 mA from default 100 mA.
3. vnn rail's voltage is changed to 5 V from default 4.2 V.
BUG=None BRANCH=None TEST="Build and boot TGL-UP3 and check VR settings with Intel ITP-XDP debugger and verify approx 20mW SoC power savings in S0ix"
Change-Id: Ic889d0952b75a636d2186d81fb679f74d50e7048 Signed-off-by: Shreesh Chhabbi shreesh.chhabbi@intel.corp-partner.google.com --- M src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb M src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb 2 files changed, 28 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/92/43992/5