[coreboot-gerrit] Change in coreboot[master]: mb/google/dedede: Remove pad termination for RAM_STRAP_4

[Karthik Ramasubramanian (Code Review)]

Hello build bot (Jenkins), Furquan Shaikh, Marco Chen,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/40531

to look at the new patch set (#2).

Change subject: mb/google/dedede: Remove pad termination for RAM_STRAP_4
......................................................................

mb/google/dedede: Remove pad termination for RAM_STRAP_4

The stuffed resistor straps are weaker compared to the internal pull-up.
This can cause the GPIO to read '1' always. Remove the internal pull-up.
Also read the GPIO only on the boards where the board version is
populated.

BUG=b:154301008
TEST=Build and boot the mainboard.

Change-Id: Ib640211b9f50dfb0174a570eda1625bacbebb855
Signed-off-by: Karthikeyan Ramasubramanian 
---
M src/mainboard/google/dedede/romstage.c
M src/mainboard/google/dedede/variants/baseboard/gpio.c
2 files changed, 9 insertions(+), 3 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/31/40531/2