Martin Roth (martinroth@google.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17605
-gerrit
commit 647d17175e485641f4290fe3363e963cc8bbde6b Author: Patrick Rudolph siro@das-labor.org Date: Fri Nov 11 18:38:50 2016 +0100
nb/intel/sandybridge/raminit: Separate Sandybridge and Ivybridge
Add custom files for Sandybridge and IvyBridge functions. Move only the minimal required functions into separate files. Both files' functions are going to call raminit_common functions. No functionality is changed.
Sandybridge code path tested on Lenovo T420.
Change-Id: I1b1dfbd0857b59d3ae4392b73c033ee7a5aed243 Signed-off-by: Patrick Rudolph siro@das-labor.org --- src/northbridge/intel/sandybridge/Makefile.inc | 2 + src/northbridge/intel/sandybridge/raminit.c | 502 +------------------- src/northbridge/intel/sandybridge/raminit_common.h | 8 +- src/northbridge/intel/sandybridge/raminit_ivy.c | 514 +++++++++++++++++++++ src/northbridge/intel/sandybridge/raminit_sandy.c | 514 +++++++++++++++++++++ 5 files changed, 1053 insertions(+), 487 deletions(-)
diff --git a/src/northbridge/intel/sandybridge/Makefile.inc b/src/northbridge/intel/sandybridge/Makefile.inc index cc0228b..a40fa15 100644 --- a/src/northbridge/intel/sandybridge/Makefile.inc +++ b/src/northbridge/intel/sandybridge/Makefile.inc @@ -27,6 +27,8 @@ romstage-y += ram_calc.c ifeq ($(CONFIG_USE_NATIVE_RAMINIT),y) romstage-y += raminit.c romstage-y += raminit_common.c +romstage-y += raminit_sandy.c +romstage-y += raminit_ivy.c romstage-y += ../../../device/dram/ddr3.c else romstage-y += raminit_mrc.c diff --git a/src/northbridge/intel/sandybridge/raminit.c b/src/northbridge/intel/sandybridge/raminit.c index 1fdcb4f..58a8bf2 100644 --- a/src/northbridge/intel/sandybridge/raminit.c +++ b/src/northbridge/intel/sandybridge/raminit.c @@ -277,377 +277,6 @@ static void dram_find_spds_ddr3(spd_raw_data *spd, ramctr_timing *ctrl) die("No DIMMs were found"); }
-/* Frequency multiplier. */ -static u32 get_FRQ(u32 tCK) -{ - u32 FRQ; - FRQ = 256000 / (tCK * BASEFREQ); - if (FRQ > 8) - return 8; - if (FRQ < 3) - return 3; - return FRQ; -} - -static u32 get_REFI(u32 tCK) -{ - /* Get REFI based on MCU frequency using the following rule: - * _________________________________________ - * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | - * REFI: | 3120 | 4160 | 5200 | 6240 | 7280 | 8320 | - */ - static const u32 frq_refi_map[] = - { 3120, 4160, 5200, 6240, 7280, 8320 }; - return frq_refi_map[get_FRQ(tCK) - 3]; -} - -static u8 get_XSOffset(u32 tCK) -{ - /* Get XSOffset based on MCU frequency using the following rule: - * _________________________ - * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | - * XSOffset : | 4 | 6 | 7 | 8 | 10 | 11 | - */ - static const u8 frq_xs_map[] = { 4, 6, 7, 8, 10, 11 }; - return frq_xs_map[get_FRQ(tCK) - 3]; -} - -static u8 get_MOD(u32 tCK) -{ - /* Get MOD based on MCU frequency using the following rule: - * _____________________________ - * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | - * MOD : | 12 | 12 | 12 | 12 | 15 | 16 | - */ - static const u8 frq_mod_map[] = { 12, 12, 12, 12, 15, 16 }; - return frq_mod_map[get_FRQ(tCK) - 3]; -} - -static u8 get_WLO(u32 tCK) -{ - /* Get WLO based on MCU frequency using the following rule: - * _______________________ - * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | - * WLO : | 4 | 5 | 6 | 6 | 8 | 8 | - */ - static const u8 frq_wlo_map[] = { 4, 5, 6, 6, 8, 8 }; - return frq_wlo_map[get_FRQ(tCK) - 3]; -} - -static u8 get_CKE(u32 tCK) -{ - /* Get CKE based on MCU frequency using the following rule: - * _______________________ - * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | - * CKE : | 3 | 3 | 4 | 4 | 5 | 6 | - */ - static const u8 frq_cke_map[] = { 3, 3, 4, 4, 5, 6 }; - return frq_cke_map[get_FRQ(tCK) - 3]; -} - -static u8 get_XPDLL(u32 tCK) -{ - /* Get XPDLL based on MCU frequency using the following rule: - * _____________________________ - * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | - * XPDLL : | 10 | 13 | 16 | 20 | 23 | 26 | - */ - static const u8 frq_xpdll_map[] = { 10, 13, 16, 20, 23, 26 }; - return frq_xpdll_map[get_FRQ(tCK) - 3]; -} - -static u8 get_XP(u32 tCK) -{ - /* Get XP based on MCU frequency using the following rule: - * _______________________ - * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | - * XP : | 3 | 4 | 4 | 5 | 6 | 7 | - */ - static const u8 frq_xp_map[] = { 3, 4, 4, 5, 6, 7 }; - return frq_xp_map[get_FRQ(tCK) - 3]; -} - -static u8 get_AONPD(u32 tCK) -{ - /* Get AONPD based on MCU frequency using the following rule: - * ________________________ - * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | - * AONPD : | 4 | 5 | 6 | 8 | 8 | 10 | - */ - static const u8 frq_aonpd_map[] = { 4, 5, 6, 8, 8, 10 }; - return frq_aonpd_map[get_FRQ(tCK) - 3]; -} - -static u32 get_COMP2(u32 tCK) -{ - /* Get COMP2 based on MCU frequency using the following rule: - * ___________________________________________________________ - * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | - * COMP : | D6BEDCC | CE7C34C | CA57A4C | C6369CC | C42514C | C21410C | - */ - static const u32 frq_comp2_map[] = { 0xD6BEDCC, 0xCE7C34C, 0xCA57A4C, - 0xC6369CC, 0xC42514C, 0xC21410C - }; - return frq_comp2_map[get_FRQ(tCK) - 3]; -} - -static void dram_timing(ramctr_timing * ctrl) -{ - u8 val; - u32 val32; - - /* Maximum supported DDR3 frequency is 1066MHz (DDR3 2133) so make sure - * we cap it if we have faster DIMMs. - * Then, align it to the closest JEDEC standard frequency */ - if (ctrl->tCK <= TCK_1066MHZ) { - ctrl->tCK = TCK_1066MHZ; - ctrl->edge_offset[0] = 16; - ctrl->edge_offset[1] = 7; - ctrl->edge_offset[2] = 7; - ctrl->timC_offset[0] = 18; - ctrl->timC_offset[1] = 7; - ctrl->timC_offset[2] = 7; - ctrl->reg_320c_range_threshold = 13; - } else if (ctrl->tCK <= TCK_933MHZ) { - ctrl->tCK = TCK_933MHZ; - ctrl->edge_offset[0] = 14; - ctrl->edge_offset[1] = 6; - ctrl->edge_offset[2] = 6; - ctrl->timC_offset[0] = 15; - ctrl->timC_offset[1] = 6; - ctrl->timC_offset[2] = 6; - ctrl->reg_320c_range_threshold = 15; - } else if (ctrl->tCK <= TCK_800MHZ) { - ctrl->tCK = TCK_800MHZ; - ctrl->edge_offset[0] = 13; - ctrl->edge_offset[1] = 5; - ctrl->edge_offset[2] = 5; - ctrl->timC_offset[0] = 14; - ctrl->timC_offset[1] = 5; - ctrl->timC_offset[2] = 5; - ctrl->reg_320c_range_threshold = 15; - } else if (ctrl->tCK <= TCK_666MHZ) { - ctrl->tCK = TCK_666MHZ; - ctrl->edge_offset[0] = 10; - ctrl->edge_offset[1] = 4; - ctrl->edge_offset[2] = 4; - ctrl->timC_offset[0] = 11; - ctrl->timC_offset[1] = 4; - ctrl->timC_offset[2] = 4; - ctrl->reg_320c_range_threshold = 16; - } else if (ctrl->tCK <= TCK_533MHZ) { - ctrl->tCK = TCK_533MHZ; - ctrl->edge_offset[0] = 8; - ctrl->edge_offset[1] = 3; - ctrl->edge_offset[2] = 3; - ctrl->timC_offset[0] = 9; - ctrl->timC_offset[1] = 3; - ctrl->timC_offset[2] = 3; - ctrl->reg_320c_range_threshold = 17; - } else { - ctrl->tCK = TCK_400MHZ; - ctrl->edge_offset[0] = 6; - ctrl->edge_offset[1] = 2; - ctrl->edge_offset[2] = 2; - ctrl->timC_offset[0] = 6; - ctrl->timC_offset[1] = 2; - ctrl->timC_offset[2] = 2; - ctrl->reg_320c_range_threshold = 17; - } - - /* Initial phase between CLK/CMD pins */ - ctrl->reg_c14_offset = (256000 / ctrl->tCK) / 66; - - /* DLL_CONFIG_MDLL_W_TIMER */ - ctrl->reg_5064b0 = (128000 / ctrl->tCK) + 3; - - val32 = (1000 << 8) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", val32); - - /* Find CAS latency */ - val = (ctrl->tAA + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Minimum CAS latency : %uT\n", val); - /* Find lowest supported CAS latency that satisfies the minimum value */ - while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1) - && (ctrl->cas_supported >> (val - MIN_CAS))) { - val++; - } - /* Is CAS supported */ - if (!(ctrl->cas_supported & (1 << (val - MIN_CAS)))) { - printk(BIOS_ERR, "CAS %uT not supported. ", val); - val = MAX_CAS; - /* Find highest supported CAS latency */ - while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1)) - val--; - - printk(BIOS_ERR, "Using CAS %uT instead.\n", val); - } - - printk(BIOS_DEBUG, "Selected CAS latency : %uT\n", val); - ctrl->CAS = val; - ctrl->CWL = get_CWL(ctrl->tCK); - printk(BIOS_DEBUG, "Selected CWL latency : %uT\n", ctrl->CWL); - - /* Find tRCD */ - ctrl->tRCD = (ctrl->tRCD + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected tRCD : %uT\n", ctrl->tRCD); - - ctrl->tRP = (ctrl->tRP + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected tRP : %uT\n", ctrl->tRP); - - /* Find tRAS */ - ctrl->tRAS = (ctrl->tRAS + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected tRAS : %uT\n", ctrl->tRAS); - - /* Find tWR */ - ctrl->tWR = (ctrl->tWR + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected tWR : %uT\n", ctrl->tWR); - - /* Find tFAW */ - ctrl->tFAW = (ctrl->tFAW + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected tFAW : %uT\n", ctrl->tFAW); - - /* Find tRRD */ - ctrl->tRRD = (ctrl->tRRD + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected tRRD : %uT\n", ctrl->tRRD); - - /* Find tRTP */ - ctrl->tRTP = (ctrl->tRTP + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected tRTP : %uT\n", ctrl->tRTP); - - /* Find tWTR */ - ctrl->tWTR = (ctrl->tWTR + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected tWTR : %uT\n", ctrl->tWTR); - - /* Refresh-to-Active or Refresh-to-Refresh (tRFC) */ - ctrl->tRFC = (ctrl->tRFC + ctrl->tCK - 1) / ctrl->tCK; - printk(BIOS_DEBUG, "Selected tRFC : %uT\n", ctrl->tRFC); - - ctrl->tREFI = get_REFI(ctrl->tCK); - ctrl->tMOD = get_MOD(ctrl->tCK); - ctrl->tXSOffset = get_XSOffset(ctrl->tCK); - ctrl->tWLO = get_WLO(ctrl->tCK); - ctrl->tCKE = get_CKE(ctrl->tCK); - ctrl->tXPDLL = get_XPDLL(ctrl->tCK); - ctrl->tXP = get_XP(ctrl->tCK); - ctrl->tAONPD = get_AONPD(ctrl->tCK); -} - -static void dram_freq(ramctr_timing * ctrl) -{ - if (ctrl->tCK > TCK_400MHZ) { - printk (BIOS_ERR, "DRAM frequency is under lowest supported frequency (400 MHz). Increasing to 400 MHz as last resort"); - ctrl->tCK = TCK_400MHZ; - } - while (1) { - u8 val2; - u32 reg1 = 0; - - /* Step 1 - Set target PCU frequency */ - - if (ctrl->tCK <= TCK_1066MHZ) { - ctrl->tCK = TCK_1066MHZ; - } else if (ctrl->tCK <= TCK_933MHZ) { - ctrl->tCK = TCK_933MHZ; - } else if (ctrl->tCK <= TCK_800MHZ) { - ctrl->tCK = TCK_800MHZ; - } else if (ctrl->tCK <= TCK_666MHZ) { - ctrl->tCK = TCK_666MHZ; - } else if (ctrl->tCK <= TCK_533MHZ) { - ctrl->tCK = TCK_533MHZ; - } else if (ctrl->tCK <= TCK_400MHZ) { - ctrl->tCK = TCK_400MHZ; - } else { - die ("No lock frequency found"); - } - - /* Frequency multiplier. */ - u32 FRQ = get_FRQ(ctrl->tCK); - - /* The PLL will never lock if the required frequency is - * already set. Exit early to prevent a system hang. - */ - reg1 = MCHBAR32(MC_BIOS_DATA); - val2 = (u8) reg1; - if (val2) - return; - - /* Step 2 - Select frequency in the MCU */ - reg1 = FRQ; - reg1 |= 0x80000000; // set running bit - MCHBAR32(MC_BIOS_REQ) = reg1; - int i=0; - printk(BIOS_DEBUG, "PLL busy... "); - while (reg1 & 0x80000000) { - udelay(10); - i++; - reg1 = MCHBAR32(MC_BIOS_REQ); - } - printk(BIOS_DEBUG, "done in %d us\n", i * 10); - - /* Step 3 - Verify lock frequency */ - reg1 = MCHBAR32(MC_BIOS_DATA); - val2 = (u8) reg1; - if (val2 >= FRQ) { - printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n", - (1000 << 8) / ctrl->tCK); - return; - } - printk(BIOS_DEBUG, "PLL didn't lock. Retrying at lower frequency\n"); - ctrl->tCK++; - } -} - -static void dram_ioregs(ramctr_timing * ctrl) -{ - u32 reg, comp2; - - int channel; - - // IO clock - FOR_ALL_CHANNELS { - MCHBAR32(0xc00 + 0x100 * channel) = ctrl->rankmap[channel]; - } - - // IO command - FOR_ALL_CHANNELS { - MCHBAR32(0x3200 + 0x100 * channel) = ctrl->rankmap[channel]; - } - - // IO control - FOR_ALL_POPULATED_CHANNELS { - program_timings(ctrl, channel); - } - - // Rcomp - printram("RCOMP..."); - reg = 0; - while (reg == 0) { - reg = MCHBAR32(0x5084) & 0x10000; - } - printram("done\n"); - - // Set comp2 - comp2 = get_COMP2(ctrl->tCK); - MCHBAR32(0x3714) = comp2; - printram("COMP2 done\n"); - - // Set comp1 - FOR_ALL_POPULATED_CHANNELS { - reg = MCHBAR32(0x1810 + channel * 0x100); //ch0 - reg = (reg & ~0xe00) | (1 << 9); //odt - reg = (reg & ~0xe00000) | (1 << 21); //clk drive up - reg = (reg & ~0x38000000) | (1 << 27); //ctl drive up - MCHBAR32(0x1810 + channel * 0x100) = reg; - } - printram("COMP1 done\n"); - - printram("FORCE RCOMP and wait 20us..."); - MCHBAR32(0x5f08) |= 0x100; - udelay(20); - printram("done\n"); -} - static void save_timings(ramctr_timing *ctrl) { /* Save the MRC S3 restore data to cbmem */ @@ -657,121 +286,10 @@ static void save_timings(ramctr_timing *ctrl) static int try_init_dram_ddr3(ramctr_timing *ctrl, int fast_boot, int s3_resume, int me_uma_size) { - int err; - - printk(BIOS_DEBUG, "Starting RAM training (%d).\n", fast_boot); - - if (!fast_boot) { - /* Find fastest common supported parameters */ - dram_find_common_params(ctrl); - - dram_dimm_mapping(ctrl); - } - - /* Set MCU frequency */ - dram_freq(ctrl); - - if (!fast_boot) { - /* Calculate timings */ - dram_timing(ctrl); - } - - /* Set version register */ - MCHBAR32(0x5034) = 0xC04EB002; - - /* Enable crossover */ - dram_xover(ctrl); - - /* Set timing and refresh registers */ - dram_timing_regs(ctrl); - - /* Power mode preset */ - MCHBAR32(0x4e80) = 0x5500; - - /* Set scheduler parameters */ - MCHBAR32(0x4c20) = 0x10100005; - - /* Set CPU specific register */ - set_4f8c(); - - /* Clear IO reset bit */ - MCHBAR32(0x5030) &= ~0x20; - - /* Set MAD-DIMM registers */ - dram_dimm_set_mapping(ctrl); - printk(BIOS_DEBUG, "Done dimm mapping\n"); - - /* Zone config */ - dram_zones(ctrl, 1); - - /* Set memory map */ - dram_memorymap(ctrl, me_uma_size); - printk(BIOS_DEBUG, "Done memory map\n"); - - /* Set IO registers */ - dram_ioregs(ctrl); - printk(BIOS_DEBUG, "Done io registers\n"); - - udelay(1); - - if (fast_boot) { - restore_timings(ctrl); - } else { - /* Do jedec ddr3 reset sequence */ - dram_jedecreset(ctrl); - printk(BIOS_DEBUG, "Done jedec reset\n"); - - /* MRS commands */ - dram_mrscommands(ctrl); - printk(BIOS_DEBUG, "Done MRS commands\n"); - - /* Prepare for memory training */ - prepare_training(ctrl); - - err = read_training(ctrl); - if (err) - return err; - - err = write_training(ctrl); - if (err) - return err; - - printram("CP5a\n"); - - err = discover_edges(ctrl); - if (err) - return err; - - printram("CP5b\n"); - - err = command_training(ctrl); - if (err) - return err; - - printram("CP5c\n"); - - err = discover_edges_write(ctrl); - if (err) - return err; - - err = discover_timC_write(ctrl); - if (err) - return err; - - normalize_training(ctrl); - } - - set_4008c(ctrl); - - write_controller_mr(ctrl); - - if (!s3_resume) { - err = channel_test(ctrl); - if (err) - return err; - } - - return 0; + if (ctrl->sandybridge) + return try_init_dram_ddr3_sandy(ctrl, fast_boot, s3_resume, me_uma_size); + else + return try_init_dram_ddr3_ivy(ctrl, fast_boot, s3_resume, me_uma_size); }
static void init_dram_ddr3(int mobile, int min_tck, int s3resume) @@ -783,7 +301,9 @@ static void init_dram_ddr3(int mobile, int min_tck, int s3resume) spd_raw_data spds[4]; struct mrc_data_container *mrc_cache; ramctr_timing *ctrl_cached; + struct cpuid_result cpures; int err; + u32 cpu;
MCHBAR32(0x5f00) |= 1;
@@ -864,6 +384,11 @@ static void init_dram_ddr3(int mobile, int min_tck, int s3resume) ctrl.mobile = mobile; ctrl.tCK = min_tck;
+ /* Get architecture */ + cpures = cpuid(1); + cpu = cpures.eax; + ctrl.sandybridge = IS_SANDY_CPU(cpu); + /* Get DDR3 SPD data */ memset(spds, 0, sizeof(spds)); mainboard_get_spd(spds, 0); @@ -882,6 +407,11 @@ static void init_dram_ddr3(int mobile, int min_tck, int s3resume) ctrl.mobile = mobile; ctrl.tCK = min_tck;
+ /* Get architecture */ + cpures = cpuid(1); + cpu = cpures.eax; + ctrl.sandybridge = IS_SANDY_CPU(cpu); + /* Reset DDR3 frequency */ dram_find_spds_ddr3(spds, &ctrl);
diff --git a/src/northbridge/intel/sandybridge/raminit_common.h b/src/northbridge/intel/sandybridge/raminit_common.h index 4655ed5..7aec735 100644 --- a/src/northbridge/intel/sandybridge/raminit_common.h +++ b/src/northbridge/intel/sandybridge/raminit_common.h @@ -76,6 +76,7 @@ struct ramctr_timing_st; typedef struct ramctr_timing_st { u16 spd_crc[NUM_CHANNELS][NUM_SLOTS]; int mobile; + int sandybridge;
u16 cas_supported; /* tLatencies are in units of ns, scaled by x256 */ @@ -176,5 +177,10 @@ void set_42a0(ramctr_timing * ctrl); void final_registers(ramctr_timing * ctrl); void restore_timings(ramctr_timing * ctrl);
-#endif +int try_init_dram_ddr3_sandy(ramctr_timing *ctrl, int fast_boot, + int s3_resume, int me_uma_size); + +int try_init_dram_ddr3_ivy(ramctr_timing *ctrl, int fast_boot, + int s3_resume, int me_uma_size);
+#endif diff --git a/src/northbridge/intel/sandybridge/raminit_ivy.c b/src/northbridge/intel/sandybridge/raminit_ivy.c new file mode 100644 index 0000000..9349cf7 --- /dev/null +++ b/src/northbridge/intel/sandybridge/raminit_ivy.c @@ -0,0 +1,514 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Damien Zammit damien@zamaudio.com + * Copyright (C) 2014 Vladimir Serbinenko phcoder@gmail.com + * Copyright (C) 2016 Patrick Rudolph siro@das-labor.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <console/usb.h> +#include <cpu/x86/msr.h> +#include <delay.h> +#include "raminit_native.h" +#include "raminit_common.h" + +/* Frequency multiplier. */ +static u32 get_FRQ(u32 tCK) +{ + u32 FRQ; + FRQ = 256000 / (tCK * BASEFREQ); + if (FRQ > 8) + return 8; + if (FRQ < 3) + return 3; + return FRQ; +} + +static u32 get_REFI(u32 tCK) +{ + /* Get REFI based on MCU frequency using the following rule: + * _________________________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * REFI: | 3120 | 4160 | 5200 | 6240 | 7280 | 8320 | + */ + static const u32 frq_refi_map[] = + { 3120, 4160, 5200, 6240, 7280, 8320 }; + return frq_refi_map[get_FRQ(tCK) - 3]; +} + +static u8 get_XSOffset(u32 tCK) +{ + /* Get XSOffset based on MCU frequency using the following rule: + * _________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * XSOffset : | 4 | 6 | 7 | 8 | 10 | 11 | + */ + static const u8 frq_xs_map[] = { 4, 6, 7, 8, 10, 11 }; + return frq_xs_map[get_FRQ(tCK) - 3]; +} + +static u8 get_MOD(u32 tCK) +{ + /* Get MOD based on MCU frequency using the following rule: + * _____________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * MOD : | 12 | 12 | 12 | 12 | 15 | 16 | + */ + static const u8 frq_mod_map[] = { 12, 12, 12, 12, 15, 16 }; + return frq_mod_map[get_FRQ(tCK) - 3]; +} + +static u8 get_WLO(u32 tCK) +{ + /* Get WLO based on MCU frequency using the following rule: + * _______________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * WLO : | 4 | 5 | 6 | 6 | 8 | 8 | + */ + static const u8 frq_wlo_map[] = { 4, 5, 6, 6, 8, 8 }; + return frq_wlo_map[get_FRQ(tCK) - 3]; +} + +static u8 get_CKE(u32 tCK) +{ + /* Get CKE based on MCU frequency using the following rule: + * _______________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * CKE : | 3 | 3 | 4 | 4 | 5 | 6 | + */ + static const u8 frq_cke_map[] = { 3, 3, 4, 4, 5, 6 }; + return frq_cke_map[get_FRQ(tCK) - 3]; +} + +static u8 get_XPDLL(u32 tCK) +{ + /* Get XPDLL based on MCU frequency using the following rule: + * _____________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * XPDLL : | 10 | 13 | 16 | 20 | 23 | 26 | + */ + static const u8 frq_xpdll_map[] = { 10, 13, 16, 20, 23, 26 }; + return frq_xpdll_map[get_FRQ(tCK) - 3]; +} + +static u8 get_XP(u32 tCK) +{ + /* Get XP based on MCU frequency using the following rule: + * _______________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * XP : | 3 | 4 | 4 | 5 | 6 | 7 | + */ + static const u8 frq_xp_map[] = { 3, 4, 4, 5, 6, 7 }; + return frq_xp_map[get_FRQ(tCK) - 3]; +} + +static u8 get_AONPD(u32 tCK) +{ + /* Get AONPD based on MCU frequency using the following rule: + * ________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * AONPD : | 4 | 5 | 6 | 8 | 8 | 10 | + */ + static const u8 frq_aonpd_map[] = { 4, 5, 6, 8, 8, 10 }; + return frq_aonpd_map[get_FRQ(tCK) - 3]; +} + +static u32 get_COMP2(u32 tCK) +{ + /* Get COMP2 based on MCU frequency using the following rule: + * ___________________________________________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * COMP : | D6BEDCC | CE7C34C | CA57A4C | C6369CC | C42514C | C21410C | + */ + static const u32 frq_comp2_map[] = { 0xD6BEDCC, 0xCE7C34C, 0xCA57A4C, + 0xC6369CC, 0xC42514C, 0xC21410C + }; + return frq_comp2_map[get_FRQ(tCK) - 3]; +} + +static void dram_timing(ramctr_timing * ctrl) +{ + u8 val; + u32 val32; + + /* Maximum supported DDR3 frequency is 1066MHz (DDR3 2133) so make sure + * we cap it if we have faster DIMMs. + * Then, align it to the closest JEDEC standard frequency */ + if (ctrl->tCK <= TCK_1066MHZ) { + ctrl->tCK = TCK_1066MHZ; + ctrl->edge_offset[0] = 16; + ctrl->edge_offset[1] = 7; + ctrl->edge_offset[2] = 7; + ctrl->timC_offset[0] = 18; + ctrl->timC_offset[1] = 7; + ctrl->timC_offset[2] = 7; + ctrl->reg_320c_range_threshold = 13; + } else if (ctrl->tCK <= TCK_933MHZ) { + ctrl->tCK = TCK_933MHZ; + ctrl->edge_offset[0] = 14; + ctrl->edge_offset[1] = 6; + ctrl->edge_offset[2] = 6; + ctrl->timC_offset[0] = 15; + ctrl->timC_offset[1] = 6; + ctrl->timC_offset[2] = 6; + ctrl->reg_320c_range_threshold = 15; + } else if (ctrl->tCK <= TCK_800MHZ) { + ctrl->tCK = TCK_800MHZ; + ctrl->edge_offset[0] = 13; + ctrl->edge_offset[1] = 5; + ctrl->edge_offset[2] = 5; + ctrl->timC_offset[0] = 14; + ctrl->timC_offset[1] = 5; + ctrl->timC_offset[2] = 5; + ctrl->reg_320c_range_threshold = 15; + } else if (ctrl->tCK <= TCK_666MHZ) { + ctrl->tCK = TCK_666MHZ; + ctrl->edge_offset[0] = 10; + ctrl->edge_offset[1] = 4; + ctrl->edge_offset[2] = 4; + ctrl->timC_offset[0] = 11; + ctrl->timC_offset[1] = 4; + ctrl->timC_offset[2] = 4; + ctrl->reg_320c_range_threshold = 16; + } else if (ctrl->tCK <= TCK_533MHZ) { + ctrl->tCK = TCK_533MHZ; + ctrl->edge_offset[0] = 8; + ctrl->edge_offset[1] = 3; + ctrl->edge_offset[2] = 3; + ctrl->timC_offset[0] = 9; + ctrl->timC_offset[1] = 3; + ctrl->timC_offset[2] = 3; + ctrl->reg_320c_range_threshold = 17; + } else { + ctrl->tCK = TCK_400MHZ; + ctrl->edge_offset[0] = 6; + ctrl->edge_offset[1] = 2; + ctrl->edge_offset[2] = 2; + ctrl->timC_offset[0] = 6; + ctrl->timC_offset[1] = 2; + ctrl->timC_offset[2] = 2; + ctrl->reg_320c_range_threshold = 17; + } + + /* Initial phase between CLK/CMD pins */ + ctrl->reg_c14_offset = (256000 / ctrl->tCK) / 66; + + /* DLL_CONFIG_MDLL_W_TIMER */ + ctrl->reg_5064b0 = (128000 / ctrl->tCK) + 3; + + val32 = (1000 << 8) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", val32); + + /* Find CAS latency */ + val = (ctrl->tAA + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Minimum CAS latency : %uT\n", val); + /* Find lowest supported CAS latency that satisfies the minimum value */ + while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1) + && (ctrl->cas_supported >> (val - MIN_CAS))) { + val++; + } + /* Is CAS supported */ + if (!(ctrl->cas_supported & (1 << (val - MIN_CAS)))) { + printk(BIOS_ERR, "CAS %uT not supported. ", val); + val = MAX_CAS; + /* Find highest supported CAS latency */ + while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1)) + val--; + + printk(BIOS_ERR, "Using CAS %uT instead.\n", val); + } + + printk(BIOS_DEBUG, "Selected CAS latency : %uT\n", val); + ctrl->CAS = val; + ctrl->CWL = get_CWL(ctrl->tCK); + printk(BIOS_DEBUG, "Selected CWL latency : %uT\n", ctrl->CWL); + + /* Find tRCD */ + ctrl->tRCD = (ctrl->tRCD + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRCD : %uT\n", ctrl->tRCD); + + ctrl->tRP = (ctrl->tRP + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRP : %uT\n", ctrl->tRP); + + /* Find tRAS */ + ctrl->tRAS = (ctrl->tRAS + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRAS : %uT\n", ctrl->tRAS); + + /* Find tWR */ + ctrl->tWR = (ctrl->tWR + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tWR : %uT\n", ctrl->tWR); + + /* Find tFAW */ + ctrl->tFAW = (ctrl->tFAW + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tFAW : %uT\n", ctrl->tFAW); + + /* Find tRRD */ + ctrl->tRRD = (ctrl->tRRD + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRRD : %uT\n", ctrl->tRRD); + + /* Find tRTP */ + ctrl->tRTP = (ctrl->tRTP + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRTP : %uT\n", ctrl->tRTP); + + /* Find tWTR */ + ctrl->tWTR = (ctrl->tWTR + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tWTR : %uT\n", ctrl->tWTR); + + /* Refresh-to-Active or Refresh-to-Refresh (tRFC) */ + ctrl->tRFC = (ctrl->tRFC + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRFC : %uT\n", ctrl->tRFC); + + ctrl->tREFI = get_REFI(ctrl->tCK); + ctrl->tMOD = get_MOD(ctrl->tCK); + ctrl->tXSOffset = get_XSOffset(ctrl->tCK); + ctrl->tWLO = get_WLO(ctrl->tCK); + ctrl->tCKE = get_CKE(ctrl->tCK); + ctrl->tXPDLL = get_XPDLL(ctrl->tCK); + ctrl->tXP = get_XP(ctrl->tCK); + ctrl->tAONPD = get_AONPD(ctrl->tCK); +} + +static void dram_freq(ramctr_timing * ctrl) +{ + if (ctrl->tCK > TCK_400MHZ) { + printk (BIOS_ERR, "DRAM frequency is under lowest supported frequency (400 MHz). Increasing to 400 MHz as last resort"); + ctrl->tCK = TCK_400MHZ; + } + while (1) { + u8 val2; + u32 reg1 = 0; + + /* Step 1 - Set target PCU frequency */ + + if (ctrl->tCK <= TCK_1066MHZ) { + ctrl->tCK = TCK_1066MHZ; + } else if (ctrl->tCK <= TCK_933MHZ) { + ctrl->tCK = TCK_933MHZ; + } else if (ctrl->tCK <= TCK_800MHZ) { + ctrl->tCK = TCK_800MHZ; + } else if (ctrl->tCK <= TCK_666MHZ) { + ctrl->tCK = TCK_666MHZ; + } else if (ctrl->tCK <= TCK_533MHZ) { + ctrl->tCK = TCK_533MHZ; + } else if (ctrl->tCK <= TCK_400MHZ) { + ctrl->tCK = TCK_400MHZ; + } else { + die ("No lock frequency found"); + } + + /* Frequency multiplier. */ + u32 FRQ = get_FRQ(ctrl->tCK); + + /* The PLL will never lock if the required frequency is + * already set. Exit early to prevent a system hang. + */ + reg1 = MCHBAR32(MC_BIOS_DATA); + val2 = (u8) reg1; + if (val2) + return; + + /* Step 2 - Select frequency in the MCU */ + reg1 = FRQ; + reg1 |= 0x80000000; // set running bit + MCHBAR32(MC_BIOS_REQ) = reg1; + int i=0; + printk(BIOS_DEBUG, "PLL busy... "); + while (reg1 & 0x80000000) { + udelay(10); + i++; + reg1 = MCHBAR32(MC_BIOS_REQ); + } + printk(BIOS_DEBUG, "done in %d us\n", i * 10); + + /* Step 3 - Verify lock frequency */ + reg1 = MCHBAR32(MC_BIOS_DATA); + val2 = (u8) reg1; + if (val2 >= FRQ) { + printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n", + (1000 << 8) / ctrl->tCK); + return; + } + printk(BIOS_DEBUG, "PLL didn't lock. Retrying at lower frequency\n"); + ctrl->tCK++; + } +} + +static void dram_ioregs(ramctr_timing * ctrl) +{ + u32 reg, comp2; + + int channel; + + // IO clock + FOR_ALL_CHANNELS { + MCHBAR32(0xc00 + 0x100 * channel) = ctrl->rankmap[channel]; + } + + // IO command + FOR_ALL_CHANNELS { + MCHBAR32(0x3200 + 0x100 * channel) = ctrl->rankmap[channel]; + } + + // IO control + FOR_ALL_POPULATED_CHANNELS { + program_timings(ctrl, channel); + } + + // Rcomp + printram("RCOMP..."); + reg = 0; + while (reg == 0) { + reg = MCHBAR32(0x5084) & 0x10000; + } + printram("done\n"); + + // Set comp2 + comp2 = get_COMP2(ctrl->tCK); + MCHBAR32(0x3714) = comp2; + printram("COMP2 done\n"); + + // Set comp1 + FOR_ALL_POPULATED_CHANNELS { + reg = MCHBAR32(0x1810 + channel * 0x100); //ch0 + reg = (reg & ~0xe00) | (1 << 9); //odt + reg = (reg & ~0xe00000) | (1 << 21); //clk drive up + reg = (reg & ~0x38000000) | (1 << 27); //ctl drive up + MCHBAR32(0x1810 + channel * 0x100) = reg; + } + printram("COMP1 done\n"); + + printram("FORCE RCOMP and wait 20us..."); + MCHBAR32(0x5f08) |= 0x100; + udelay(20); + printram("done\n"); +} + +int try_init_dram_ddr3_ivy(ramctr_timing *ctrl, int fast_boot, + int s3_resume, int me_uma_size) +{ + int err; + + printk(BIOS_DEBUG, "Starting RAM training (%d).\n", fast_boot); + + if (!fast_boot) { + /* Find fastest common supported parameters */ + dram_find_common_params(ctrl); + + dram_dimm_mapping(ctrl); + } + + /* Set MCU frequency */ + dram_freq(ctrl); + + if (!fast_boot) { + /* Calculate timings */ + dram_timing(ctrl); + } + + /* Set version register */ + MCHBAR32(0x5034) = 0xC04EB002; + + /* Enable crossover */ + dram_xover(ctrl); + + /* Set timing and refresh registers */ + dram_timing_regs(ctrl); + + /* Power mode preset */ + MCHBAR32(0x4e80) = 0x5500; + + /* Set scheduler parameters */ + MCHBAR32(0x4c20) = 0x10100005; + + /* Set CPU specific register */ + set_4f8c(); + + /* Clear IO reset bit */ + MCHBAR32(0x5030) &= ~0x20; + + /* Set MAD-DIMM registers */ + dram_dimm_set_mapping(ctrl); + printk(BIOS_DEBUG, "Done dimm mapping\n"); + + /* Zone config */ + dram_zones(ctrl, 1); + + /* Set memory map */ + dram_memorymap(ctrl, me_uma_size); + printk(BIOS_DEBUG, "Done memory map\n"); + + /* Set IO registers */ + dram_ioregs(ctrl); + printk(BIOS_DEBUG, "Done io registers\n"); + + udelay(1); + + if (fast_boot) { + restore_timings(ctrl); + } else { + /* Do jedec ddr3 reset sequence */ + dram_jedecreset(ctrl); + printk(BIOS_DEBUG, "Done jedec reset\n"); + + /* MRS commands */ + dram_mrscommands(ctrl); + printk(BIOS_DEBUG, "Done MRS commands\n"); + + /* Prepare for memory training */ + prepare_training(ctrl); + + err = read_training(ctrl); + if (err) + return err; + + err = write_training(ctrl); + if (err) + return err; + + printram("CP5a\n"); + + err = discover_edges(ctrl); + if (err) + return err; + + printram("CP5b\n"); + + err = command_training(ctrl); + if (err) + return err; + + printram("CP5c\n"); + + err = discover_edges_write(ctrl); + if (err) + return err; + + err = discover_timC_write(ctrl); + if (err) + return err; + + normalize_training(ctrl); + } + + set_4008c(ctrl); + + write_controller_mr(ctrl); + + if (!s3_resume) { + err = channel_test(ctrl); + if (err) + return err; + } + + return 0; +} diff --git a/src/northbridge/intel/sandybridge/raminit_sandy.c b/src/northbridge/intel/sandybridge/raminit_sandy.c new file mode 100644 index 0000000..a83cb35 --- /dev/null +++ b/src/northbridge/intel/sandybridge/raminit_sandy.c @@ -0,0 +1,514 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Damien Zammit damien@zamaudio.com + * Copyright (C) 2014 Vladimir Serbinenko phcoder@gmail.com + * Copyright (C) 2016 Patrick Rudolph siro@das-labor.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <console/usb.h> +#include <cpu/x86/msr.h> +#include <delay.h> +#include "raminit_native.h" +#include "raminit_common.h" + +/* Frequency multiplier. */ +static u32 get_FRQ(u32 tCK) +{ + u32 FRQ; + FRQ = 256000 / (tCK * BASEFREQ); + if (FRQ > 8) + return 8; + if (FRQ < 3) + return 3; + return FRQ; +} + +static u32 get_REFI(u32 tCK) +{ + /* Get REFI based on MCU frequency using the following rule: + * _________________________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * REFI: | 3120 | 4160 | 5200 | 6240 | 7280 | 8320 | + */ + static const u32 frq_refi_map[] = + { 3120, 4160, 5200, 6240, 7280, 8320 }; + return frq_refi_map[get_FRQ(tCK) - 3]; +} + +static u8 get_XSOffset(u32 tCK) +{ + /* Get XSOffset based on MCU frequency using the following rule: + * _________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * XSOffset : | 4 | 6 | 7 | 8 | 10 | 11 | + */ + static const u8 frq_xs_map[] = { 4, 6, 7, 8, 10, 11 }; + return frq_xs_map[get_FRQ(tCK) - 3]; +} + +static u8 get_MOD(u32 tCK) +{ + /* Get MOD based on MCU frequency using the following rule: + * _____________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * MOD : | 12 | 12 | 12 | 12 | 15 | 16 | + */ + static const u8 frq_mod_map[] = { 12, 12, 12, 12, 15, 16 }; + return frq_mod_map[get_FRQ(tCK) - 3]; +} + +static u8 get_WLO(u32 tCK) +{ + /* Get WLO based on MCU frequency using the following rule: + * _______________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * WLO : | 4 | 5 | 6 | 6 | 8 | 8 | + */ + static const u8 frq_wlo_map[] = { 4, 5, 6, 6, 8, 8 }; + return frq_wlo_map[get_FRQ(tCK) - 3]; +} + +static u8 get_CKE(u32 tCK) +{ + /* Get CKE based on MCU frequency using the following rule: + * _______________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * CKE : | 3 | 3 | 4 | 4 | 5 | 6 | + */ + static const u8 frq_cke_map[] = { 3, 3, 4, 4, 5, 6 }; + return frq_cke_map[get_FRQ(tCK) - 3]; +} + +static u8 get_XPDLL(u32 tCK) +{ + /* Get XPDLL based on MCU frequency using the following rule: + * _____________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * XPDLL : | 10 | 13 | 16 | 20 | 23 | 26 | + */ + static const u8 frq_xpdll_map[] = { 10, 13, 16, 20, 23, 26 }; + return frq_xpdll_map[get_FRQ(tCK) - 3]; +} + +static u8 get_XP(u32 tCK) +{ + /* Get XP based on MCU frequency using the following rule: + * _______________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * XP : | 3 | 4 | 4 | 5 | 6 | 7 | + */ + static const u8 frq_xp_map[] = { 3, 4, 4, 5, 6, 7 }; + return frq_xp_map[get_FRQ(tCK) - 3]; +} + +static u8 get_AONPD(u32 tCK) +{ + /* Get AONPD based on MCU frequency using the following rule: + * ________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * AONPD : | 4 | 5 | 6 | 8 | 8 | 10 | + */ + static const u8 frq_aonpd_map[] = { 4, 5, 6, 8, 8, 10 }; + return frq_aonpd_map[get_FRQ(tCK) - 3]; +} + +static u32 get_COMP2(u32 tCK) +{ + /* Get COMP2 based on MCU frequency using the following rule: + * ___________________________________________________________ + * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 | + * COMP : | D6BEDCC | CE7C34C | CA57A4C | C6369CC | C42514C | C21410C | + */ + static const u32 frq_comp2_map[] = { 0xD6BEDCC, 0xCE7C34C, 0xCA57A4C, + 0xC6369CC, 0xC42514C, 0xC21410C + }; + return frq_comp2_map[get_FRQ(tCK) - 3]; +} + +static void dram_timing(ramctr_timing * ctrl) +{ + u8 val; + u32 val32; + + /* Maximum supported DDR3 frequency is 1066MHz (DDR3 2133) so make sure + * we cap it if we have faster DIMMs. + * Then, align it to the closest JEDEC standard frequency */ + if (ctrl->tCK <= TCK_1066MHZ) { + ctrl->tCK = TCK_1066MHZ; + ctrl->edge_offset[0] = 16; + ctrl->edge_offset[1] = 7; + ctrl->edge_offset[2] = 7; + ctrl->timC_offset[0] = 18; + ctrl->timC_offset[1] = 7; + ctrl->timC_offset[2] = 7; + ctrl->reg_320c_range_threshold = 13; + } else if (ctrl->tCK <= TCK_933MHZ) { + ctrl->tCK = TCK_933MHZ; + ctrl->edge_offset[0] = 14; + ctrl->edge_offset[1] = 6; + ctrl->edge_offset[2] = 6; + ctrl->timC_offset[0] = 15; + ctrl->timC_offset[1] = 6; + ctrl->timC_offset[2] = 6; + ctrl->reg_320c_range_threshold = 15; + } else if (ctrl->tCK <= TCK_800MHZ) { + ctrl->tCK = TCK_800MHZ; + ctrl->edge_offset[0] = 13; + ctrl->edge_offset[1] = 5; + ctrl->edge_offset[2] = 5; + ctrl->timC_offset[0] = 14; + ctrl->timC_offset[1] = 5; + ctrl->timC_offset[2] = 5; + ctrl->reg_320c_range_threshold = 15; + } else if (ctrl->tCK <= TCK_666MHZ) { + ctrl->tCK = TCK_666MHZ; + ctrl->edge_offset[0] = 10; + ctrl->edge_offset[1] = 4; + ctrl->edge_offset[2] = 4; + ctrl->timC_offset[0] = 11; + ctrl->timC_offset[1] = 4; + ctrl->timC_offset[2] = 4; + ctrl->reg_320c_range_threshold = 16; + } else if (ctrl->tCK <= TCK_533MHZ) { + ctrl->tCK = TCK_533MHZ; + ctrl->edge_offset[0] = 8; + ctrl->edge_offset[1] = 3; + ctrl->edge_offset[2] = 3; + ctrl->timC_offset[0] = 9; + ctrl->timC_offset[1] = 3; + ctrl->timC_offset[2] = 3; + ctrl->reg_320c_range_threshold = 17; + } else { + ctrl->tCK = TCK_400MHZ; + ctrl->edge_offset[0] = 6; + ctrl->edge_offset[1] = 2; + ctrl->edge_offset[2] = 2; + ctrl->timC_offset[0] = 6; + ctrl->timC_offset[1] = 2; + ctrl->timC_offset[2] = 2; + ctrl->reg_320c_range_threshold = 17; + } + + /* Initial phase between CLK/CMD pins */ + ctrl->reg_c14_offset = (256000 / ctrl->tCK) / 66; + + /* DLL_CONFIG_MDLL_W_TIMER */ + ctrl->reg_5064b0 = (128000 / ctrl->tCK) + 3; + + val32 = (1000 << 8) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", val32); + + /* Find CAS latency */ + val = (ctrl->tAA + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Minimum CAS latency : %uT\n", val); + /* Find lowest supported CAS latency that satisfies the minimum value */ + while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1) + && (ctrl->cas_supported >> (val - MIN_CAS))) { + val++; + } + /* Is CAS supported */ + if (!(ctrl->cas_supported & (1 << (val - MIN_CAS)))) { + printk(BIOS_ERR, "CAS %uT not supported. ", val); + val = MAX_CAS; + /* Find highest supported CAS latency */ + while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1)) + val--; + + printk(BIOS_ERR, "Using CAS %uT instead.\n", val); + } + + printk(BIOS_DEBUG, "Selected CAS latency : %uT\n", val); + ctrl->CAS = val; + ctrl->CWL = get_CWL(ctrl->tCK); + printk(BIOS_DEBUG, "Selected CWL latency : %uT\n", ctrl->CWL); + + /* Find tRCD */ + ctrl->tRCD = (ctrl->tRCD + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRCD : %uT\n", ctrl->tRCD); + + ctrl->tRP = (ctrl->tRP + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRP : %uT\n", ctrl->tRP); + + /* Find tRAS */ + ctrl->tRAS = (ctrl->tRAS + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRAS : %uT\n", ctrl->tRAS); + + /* Find tWR */ + ctrl->tWR = (ctrl->tWR + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tWR : %uT\n", ctrl->tWR); + + /* Find tFAW */ + ctrl->tFAW = (ctrl->tFAW + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tFAW : %uT\n", ctrl->tFAW); + + /* Find tRRD */ + ctrl->tRRD = (ctrl->tRRD + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRRD : %uT\n", ctrl->tRRD); + + /* Find tRTP */ + ctrl->tRTP = (ctrl->tRTP + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRTP : %uT\n", ctrl->tRTP); + + /* Find tWTR */ + ctrl->tWTR = (ctrl->tWTR + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tWTR : %uT\n", ctrl->tWTR); + + /* Refresh-to-Active or Refresh-to-Refresh (tRFC) */ + ctrl->tRFC = (ctrl->tRFC + ctrl->tCK - 1) / ctrl->tCK; + printk(BIOS_DEBUG, "Selected tRFC : %uT\n", ctrl->tRFC); + + ctrl->tREFI = get_REFI(ctrl->tCK); + ctrl->tMOD = get_MOD(ctrl->tCK); + ctrl->tXSOffset = get_XSOffset(ctrl->tCK); + ctrl->tWLO = get_WLO(ctrl->tCK); + ctrl->tCKE = get_CKE(ctrl->tCK); + ctrl->tXPDLL = get_XPDLL(ctrl->tCK); + ctrl->tXP = get_XP(ctrl->tCK); + ctrl->tAONPD = get_AONPD(ctrl->tCK); +} + +static void dram_freq(ramctr_timing * ctrl) +{ + if (ctrl->tCK > TCK_400MHZ) { + printk (BIOS_ERR, "DRAM frequency is under lowest supported frequency (400 MHz). Increasing to 400 MHz as last resort"); + ctrl->tCK = TCK_400MHZ; + } + while (1) { + u8 val2; + u32 reg1 = 0; + + /* Step 1 - Set target PCU frequency */ + + if (ctrl->tCK <= TCK_1066MHZ) { + ctrl->tCK = TCK_1066MHZ; + } else if (ctrl->tCK <= TCK_933MHZ) { + ctrl->tCK = TCK_933MHZ; + } else if (ctrl->tCK <= TCK_800MHZ) { + ctrl->tCK = TCK_800MHZ; + } else if (ctrl->tCK <= TCK_666MHZ) { + ctrl->tCK = TCK_666MHZ; + } else if (ctrl->tCK <= TCK_533MHZ) { + ctrl->tCK = TCK_533MHZ; + } else if (ctrl->tCK <= TCK_400MHZ) { + ctrl->tCK = TCK_400MHZ; + } else { + die ("No lock frequency found"); + } + + /* Frequency multiplier. */ + u32 FRQ = get_FRQ(ctrl->tCK); + + /* The PLL will never lock if the required frequency is + * already set. Exit early to prevent a system hang. + */ + reg1 = MCHBAR32(MC_BIOS_DATA); + val2 = (u8) reg1; + if (val2) + return; + + /* Step 2 - Select frequency in the MCU */ + reg1 = FRQ; + reg1 |= 0x80000000; // set running bit + MCHBAR32(MC_BIOS_REQ) = reg1; + int i=0; + printk(BIOS_DEBUG, "PLL busy... "); + while (reg1 & 0x80000000) { + udelay(10); + i++; + reg1 = MCHBAR32(MC_BIOS_REQ); + } + printk(BIOS_DEBUG, "done in %d us\n", i * 10); + + /* Step 3 - Verify lock frequency */ + reg1 = MCHBAR32(MC_BIOS_DATA); + val2 = (u8) reg1; + if (val2 >= FRQ) { + printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n", + (1000 << 8) / ctrl->tCK); + return; + } + printk(BIOS_DEBUG, "PLL didn't lock. Retrying at lower frequency\n"); + ctrl->tCK++; + } +} + +static void dram_ioregs(ramctr_timing * ctrl) +{ + u32 reg, comp2; + + int channel; + + // IO clock + FOR_ALL_CHANNELS { + MCHBAR32(0xc00 + 0x100 * channel) = ctrl->rankmap[channel]; + } + + // IO command + FOR_ALL_CHANNELS { + MCHBAR32(0x3200 + 0x100 * channel) = ctrl->rankmap[channel]; + } + + // IO control + FOR_ALL_POPULATED_CHANNELS { + program_timings(ctrl, channel); + } + + // Rcomp + printram("RCOMP..."); + reg = 0; + while (reg == 0) { + reg = MCHBAR32(0x5084) & 0x10000; + } + printram("done\n"); + + // Set comp2 + comp2 = get_COMP2(ctrl->tCK); + MCHBAR32(0x3714) = comp2; + printram("COMP2 done\n"); + + // Set comp1 + FOR_ALL_POPULATED_CHANNELS { + reg = MCHBAR32(0x1810 + channel * 0x100); //ch0 + reg = (reg & ~0xe00) | (1 << 9); //odt + reg = (reg & ~0xe00000) | (1 << 21); //clk drive up + reg = (reg & ~0x38000000) | (1 << 27); //ctl drive up + MCHBAR32(0x1810 + channel * 0x100) = reg; + } + printram("COMP1 done\n"); + + printram("FORCE RCOMP and wait 20us..."); + MCHBAR32(0x5f08) |= 0x100; + udelay(20); + printram("done\n"); +} + +int try_init_dram_ddr3_sandy(ramctr_timing *ctrl, int fast_boot, + int s3_resume, int me_uma_size) +{ + int err; + + printk(BIOS_DEBUG, "Starting RAM training (%d).\n", fast_boot); + + if (!fast_boot) { + /* Find fastest common supported parameters */ + dram_find_common_params(ctrl); + + dram_dimm_mapping(ctrl); + } + + /* Set MCU frequency */ + dram_freq(ctrl); + + if (!fast_boot) { + /* Calculate timings */ + dram_timing(ctrl); + } + + /* Set version register */ + MCHBAR32(0x5034) = 0xC04EB002; + + /* Enable crossover */ + dram_xover(ctrl); + + /* Set timing and refresh registers */ + dram_timing_regs(ctrl); + + /* Power mode preset */ + MCHBAR32(0x4e80) = 0x5500; + + /* Set scheduler parameters */ + MCHBAR32(0x4c20) = 0x10100005; + + /* Set CPU specific register */ + set_4f8c(); + + /* Clear IO reset bit */ + MCHBAR32(0x5030) &= ~0x20; + + /* Set MAD-DIMM registers */ + dram_dimm_set_mapping(ctrl); + printk(BIOS_DEBUG, "Done dimm mapping\n"); + + /* Zone config */ + dram_zones(ctrl, 1); + + /* Set memory map */ + dram_memorymap(ctrl, me_uma_size); + printk(BIOS_DEBUG, "Done memory map\n"); + + /* Set IO registers */ + dram_ioregs(ctrl); + printk(BIOS_DEBUG, "Done io registers\n"); + + udelay(1); + + if (fast_boot) { + restore_timings(ctrl); + } else { + /* Do jedec ddr3 reset sequence */ + dram_jedecreset(ctrl); + printk(BIOS_DEBUG, "Done jedec reset\n"); + + /* MRS commands */ + dram_mrscommands(ctrl); + printk(BIOS_DEBUG, "Done MRS commands\n"); + + /* Prepare for memory training */ + prepare_training(ctrl); + + err = read_training(ctrl); + if (err) + return err; + + err = write_training(ctrl); + if (err) + return err; + + printram("CP5a\n"); + + err = discover_edges(ctrl); + if (err) + return err; + + printram("CP5b\n"); + + err = command_training(ctrl); + if (err) + return err; + + printram("CP5c\n"); + + err = discover_edges_write(ctrl); + if (err) + return err; + + err = discover_timC_write(ctrl); + if (err) + return err; + + normalize_training(ctrl); + } + + set_4008c(ctrl); + + write_controller_mr(ctrl); + + if (!s3_resume) { + err = channel_test(ctrl); + if (err) + return err; + } + + return 0; +}