Patrick Georgi has submitted this change. ( https://review.coreboot.org/c/coreboot/+/59875 )
Change subject: mb/google/hatch: Remove stryke mainboard ......................................................................
mb/google/hatch: Remove stryke mainboard
The stryke project/mainboard never ended up being built and was cancelled early on, therefore remove it from the tree.
Change-Id: I4d91fbd4ba0abe0cf599e8e75f04398ef9ff5222 Signed-off-by: Tim Wawrzynczak twawrzynczak@chromium.org Reviewed-on: https://review.coreboot.org/c/coreboot/+/59875 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Paul Menzel paulepanter@mailbox.org Reviewed-by: Felix Singer felixsinger@posteo.net --- M src/mainboard/google/hatch/Kconfig M src/mainboard/google/hatch/Kconfig.name D src/mainboard/google/hatch/variants/stryke/Makefile.inc D src/mainboard/google/hatch/variants/stryke/gpio.c D src/mainboard/google/hatch/variants/stryke/include/variant/acpi/dptf.asl D src/mainboard/google/hatch/variants/stryke/include/variant/ec.h D src/mainboard/google/hatch/variants/stryke/include/variant/gpio.h D src/mainboard/google/hatch/variants/stryke/overridetree.cb 8 files changed, 0 insertions(+), 360 deletions(-)
Approvals: build bot (Jenkins): Verified Paul Menzel: Looks good to me, but someone else must approve Felix Singer: Looks good to me, approved
diff --git a/src/mainboard/google/hatch/Kconfig b/src/mainboard/google/hatch/Kconfig index de68d85..f17882e 100644 --- a/src/mainboard/google/hatch/Kconfig +++ b/src/mainboard/google/hatch/Kconfig @@ -127,7 +127,6 @@ default "Palkia" if BOARD_GOOGLE_PALKIA default "Nightfury" if BOARD_GOOGLE_NIGHTFURY default "Puff" if BOARD_GOOGLE_PUFF - default "Stryke" if BOARD_GOOGLE_STRYKE default "Wyvern" if BOARD_GOOGLE_WYVERN default "Dooly" if BOARD_GOOGLE_DOOLY default "Ambassador" if BOARD_GOOGLE_AMBASSADOR @@ -162,7 +161,6 @@ default "palkia" if BOARD_GOOGLE_PALKIA default "nightfury" if BOARD_GOOGLE_NIGHTFURY default "puff" if BOARD_GOOGLE_PUFF - default "stryke" if BOARD_GOOGLE_STRYKE default "wyvern" if BOARD_GOOGLE_WYVERN default "dooly" if BOARD_GOOGLE_DOOLY default "ambassador" if BOARD_GOOGLE_AMBASSADOR diff --git a/src/mainboard/google/hatch/Kconfig.name b/src/mainboard/google/hatch/Kconfig.name index 59e2b69..fea4068 100644 --- a/src/mainboard/google/hatch/Kconfig.name +++ b/src/mainboard/google/hatch/Kconfig.name @@ -123,10 +123,6 @@ bool "-> Scout" select BOARD_GOOGLE_BASEBOARD_PUFF
-config BOARD_GOOGLE_STRYKE - bool "-> Stryke" - select BOARD_GOOGLE_BASEBOARD_HATCH - config BOARD_GOOGLE_WYVERN bool "-> Wyvern (CTL Chromebox CBx2)" select BOARD_GOOGLE_BASEBOARD_PUFF diff --git a/src/mainboard/google/hatch/variants/stryke/Makefile.inc b/src/mainboard/google/hatch/variants/stryke/Makefile.inc deleted file mode 100644 index ba66a9a..0000000 --- a/src/mainboard/google/hatch/variants/stryke/Makefile.inc +++ /dev/null @@ -1,12 +0,0 @@ -## SPDX-License-Identifier: GPL-2.0-only - -SPD_SOURCES = 4G_2400 # 0b000 -SPD_SOURCES += empty_ddr4 # 0b001 -SPD_SOURCES += 8G_2400 # 0b010 -SPD_SOURCES += 8G_2666 # 0b011 -SPD_SOURCES += 16G_2400 # 0b100 -SPD_SOURCES += 16G_2666 # 0b101 -SPD_SOURCES += 8G_3200 # 0b110 - -bootblock-y += gpio.c -ramstage-y += gpio.c diff --git a/src/mainboard/google/hatch/variants/stryke/gpio.c b/src/mainboard/google/hatch/variants/stryke/gpio.c deleted file mode 100644 index 2734629..0000000 --- a/src/mainboard/google/hatch/variants/stryke/gpio.c +++ /dev/null @@ -1,99 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <acpi/acpi.h> -#include <baseboard/gpio.h> -#include <baseboard/variants.h> -#include <commonlib/helpers.h> - -static const struct pad_config gpio_table[] = { - /* A22 : NC */ - PAD_NC(GPP_A22, NONE), - /* A23 : NC */ - PAD_NC(GPP_A23, NONE), - /* B20 : NC */ - PAD_NC(GPP_B20, NONE), - /* B21 : NC */ - PAD_NC(GPP_B21, NONE), - /* B22 : NC */ - PAD_NC(GPP_B22, NONE), - /* C11 : NC */ - PAD_NC(GPP_C11, NONE), - /* C12 : NC */ - PAD_NC(GPP_C12, NONE), - /* C15 : WWAN_DPR_SAR_ODL - * - * TODO: Driver doesn't use this pin as of now. In case driver starts - * using this pin, expose this pin to driver. - */ - PAD_CFG_GPO(GPP_C15, 1, DEEP), - /* F1 : NC */ - PAD_NC(GPP_F1, NONE), - /* F3 : MEM_STRAP_3 */ - PAD_CFG_GPI(GPP_F3, NONE, PLTRST), - /* F10 : MEM_STRAP_2 */ - PAD_CFG_GPI(GPP_F10, NONE, PLTRST), - /* F11 : NC */ - PAD_NC(GPP_F11, NONE), - /* F20 : NC */ - PAD_NC(GPP_F20, NONE), - /* F21 : NC */ - PAD_NC(GPP_F21, NONE), - /* F22 : NC */ - PAD_NC(GPP_F22, NONE), - /* H3 : SPKR_PA_EN */ - PAD_CFG_GPO(GPP_H3, 0, DEEP), - /* H19 : MEM_STRAP_0 */ - PAD_CFG_GPI(GPP_H19, NONE, PLTRST), - /* H22 : MEM_STRAP_1 */ - PAD_CFG_GPI(GPP_H22, NONE, PLTRST), -}; - -const struct pad_config *override_gpio_table(size_t *num) -{ - *num = ARRAY_SIZE(gpio_table); - return gpio_table; -} - -/* - * GPIOs configured before ramstage - * Note: the Hatch platform's romstage will configure - * the MEM_STRAP_* (a.k.a GPIO_MEM_CONFIG_*) pins - * as inputs before it reads them, so they are not - * needed in this table. - */ -static const struct pad_config early_gpio_table[] = { - /* B15 : H1_SLAVE_SPI_CS_L */ - PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), - /* B16 : H1_SLAVE_SPI_CLK */ - PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), - /* B17 : H1_SLAVE_SPI_MISO_R */ - PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), - /* B18 : H1_SLAVE_SPI_MOSI_R */ - PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1), - /* C8 : UART_PCH_RX_DEBUG_TX */ - PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), - /* C9 : UART_PCH_TX_DEBUG_RX */ - PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), - /* C14 : BT_DISABLE_L */ - PAD_CFG_GPO(GPP_C14, 0, DEEP), - /* PCH_WP_OD */ - PAD_CFG_GPI(GPP_C20, NONE, DEEP), - /* C21 : H1_PCH_INT_ODL */ - PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), - /* C22 : EC_IN_RW_OD */ - PAD_CFG_GPI(GPP_C22, NONE, DEEP), - /* C23 : WLAN_PE_RST# */ - PAD_CFG_GPO(GPP_C23, 1, DEEP), - /* E1 : M2_SSD_PEDET */ - PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), - /* E5 : SATA_DEVSLP1 */ - PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1), - /* F2 : MEM_CH_SEL */ - PAD_CFG_GPI(GPP_F2, NONE, PLTRST), -}; - -const struct pad_config *variant_early_gpio_table(size_t *num) -{ - *num = ARRAY_SIZE(early_gpio_table); - return early_gpio_table; -} diff --git a/src/mainboard/google/hatch/variants/stryke/include/variant/acpi/dptf.asl b/src/mainboard/google/hatch/variants/stryke/include/variant/acpi/dptf.asl deleted file mode 100644 index fd3b5cf..0000000 --- a/src/mainboard/google/hatch/variants/stryke/include/variant/acpi/dptf.asl +++ /dev/null @@ -1,3 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <baseboard/acpi/dptf.asl> diff --git a/src/mainboard/google/hatch/variants/stryke/include/variant/ec.h b/src/mainboard/google/hatch/variants/stryke/include/variant/ec.h deleted file mode 100644 index ce6fbfe..0000000 --- a/src/mainboard/google/hatch/variants/stryke/include/variant/ec.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef VARIANT_EC_H -#define VARIANT_EC_H - -#include <baseboard/ec.h> - -#endif diff --git a/src/mainboard/google/hatch/variants/stryke/include/variant/gpio.h b/src/mainboard/google/hatch/variants/stryke/include/variant/gpio.h deleted file mode 100644 index be96d95..0000000 --- a/src/mainboard/google/hatch/variants/stryke/include/variant/gpio.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef VARIANT_GPIO_H -#define VARIANT_GPIO_H - -#include <baseboard/gpio.h> - -/* Memory configuration board straps */ -#define GPIO_MEM_CONFIG_0 GPP_H19 -#define GPIO_MEM_CONFIG_1 GPP_H22 -#define GPIO_MEM_CONFIG_2 GPP_F10 -#define GPIO_MEM_CONFIG_3 GPP_F3 - -#endif diff --git a/src/mainboard/google/hatch/variants/stryke/overridetree.cb b/src/mainboard/google/hatch/variants/stryke/overridetree.cb deleted file mode 100644 index aa73ab6..0000000 --- a/src/mainboard/google/hatch/variants/stryke/overridetree.cb +++ /dev/null @@ -1,218 +0,0 @@ -chip soc/intel/cannonlake - - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, - [PchSerialIoIndexI2C4] = PchSerialIoPci, - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, - [PchSerialIoIndexSPI0] = PchSerialIoPci, - [PchSerialIoIndexSPI1] = PchSerialIoDisabled, - [PchSerialIoIndexSPI2] = PchSerialIoDisabled, - [PchSerialIoIndexUART0] = PchSerialIoSkipInit, - [PchSerialIoIndexUART1] = PchSerialIoDisabled, - [PchSerialIoIndexUART2] = PchSerialIoDisabled, - }" - - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port 0 - register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC2)" # Type-C Port 1 - register "usb2_ports[2]" = "USB2_PORT_SHORT(OC3)" # Type-A Port 0 - register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" #Front Camera - register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # BT - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 0 - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 0 - - # Intel Common SoC Config - #+-------------------+---------------------------+ - #| Field | Value | - #+-------------------+---------------------------+ - #| GSPI0 | cr50 TPM. Early init is | - #| | required to set up a BAR | - #| | for TPM communication | - #| | before memory is up | - #| GSPI1 | | - #| I2C0 | Touchpad | - #| I2C1 | Touch screen | - #| I2C4 | Audio | - #+-------------------+---------------------------+ - register "common_soc_config" = "{ - .gspi[0] = { - .speed_mhz = 1, - .early_init = 1, - }, - .i2c[0] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[1] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[4] = { - .speed = I2C_SPEED_FAST, - }, - }" - - # GPIO for SD card detect - register "sdcard_cd_gpio" = "vSD3_CD_B" - - device domain 0 on - device pci 02.0 on # Integrated Graphics Device - register "gfx" = "GMA_DEFAULT_PANEL(0)" - end - device pci 14.0 on - chip drivers/usb/acpi - register "desc" = ""Root Hub"" - register "type" = "UPC_TYPE_HUB" - device usb 0.0 on - chip drivers/usb/acpi - register "desc" = ""Left Type-C Port"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" - device usb 2.0 on end - end - chip drivers/usb/acpi - register "desc" = ""Right Type-C Port 1"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" - device usb 2.1 on end - end - chip drivers/usb/acpi - register "desc" = ""Left Type-A Port"" - register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" - device usb 2.2 on end - end - chip drivers/usb/acpi - # No Type-A Port 1 - device usb 2.3 off end - end - chip drivers/usb/acpi - # Unused - device usb 2.4 off end - end - chip drivers/usb/acpi - # No WWAN - device usb 2.5 off end - end - chip drivers/usb/acpi - register "desc" = ""Camera"" - register "type" = "UPC_TYPE_INTERNAL" - device usb 2.6 on end - end - chip drivers/usb/acpi - # Unused - device usb 2.7 off end - end - chip drivers/usb/acpi - # Unused - device usb 2.8 off end - end - chip drivers/usb/acpi - register "desc" = ""Bluetooth"" - register "type" = "UPC_TYPE_INTERNAL" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" - device usb 2.9 on end - end - chip drivers/usb/acpi - register "desc" = ""Left Type-C Port"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" - device usb 3.0 on end - end - chip drivers/usb/acpi - register "desc" = ""Right Type-C Port 1"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(2, 1)" - device usb 3.1 on end - end - chip drivers/usb/acpi - register "desc" = ""Left Type-A Port"" - register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" - device usb 3.2 on end - end - chip drivers/usb/acpi - # No Type-A Port 1 - device usb 3.3 off end - end - chip drivers/usb/acpi - # No WWAN - device usb 3.4 off end - end - chip drivers/usb/acpi - # Unused - device usb 3.5 off end - end - end - end - end # USB xHCI - device pci 15.0 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_A21_IRQ)" - register "wake" = "GPE0_DW0_21" - register "probed" = "1" - device i2c 15 on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0001"" - register "desc" = ""ELAN Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" - register "probed" = "1" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" - register "reset_delay_ms" = "100" - register "reset_off_delay_ms" = "5" - register "has_power_resource" = "1" - register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)" - register "stop_off_delay_ms" = "5" - device i2c 49 on end - end - chip drivers/i2c/hid - register "generic.hid" = ""GDIX0000"" - register "generic.desc" = ""Goodix Touchscreen"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D16_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" - register "generic.reset_delay_ms" = "120" - register "generic.reset_off_delay_ms" = "3" - register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" - register "generic.enable_delay_ms" = "12" - register "generic.has_power_resource" = "1" - register "hid_desc_reg_offset" = "0x01" - device i2c 5d on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 19.0 on - chip drivers/i2c/generic - register "hid" = ""10EC5682"" - register "name" = ""RT58"" - register "desc" = ""Realtek RT5682"" - register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" - register "property_count" = "1" - # Set the jd_src to RT5668_JD1 for jack detection - register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" - register "property_list[0].name" = ""realtek,jd-src"" - register "property_list[0].integer" = "1" - device i2c 1a on end - end - end #I2C #4 - device pci 1e.3 off end # GSPI #1 - device pci 1f.3 on - chip drivers/generic/max98357a - register "hid" = ""MX98357A"" - register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H3)" - register "sdmode_delay" = "5" - device generic 0 on end - end - end # Intel HDA - end - -end
2 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one.