HAOUAS Elyes (ehaouas@noos.fr) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6322
-gerrit
commit 661c7cdde6e0fc22234fe38aede4fb27456f1b6c Author: Elyes HAOUAS ehaouas@noos.fr Date: Tue Jul 22 23:45:01 2014 +0200
amd/dinar & torpedo: Remove trailing whitespace
Change-Id: I4ac14c4f511eb6d56480e5167ce98b861cbed775 Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- src/mainboard/amd/dinar/agesawrapper.h | 72 +++++++++++++++++----------------- src/mainboard/amd/dinar/buildOpts.c | 22 +++++------ src/mainboard/amd/dinar/platform_cfg.h | 4 +- 3 files changed, 49 insertions(+), 49 deletions(-)
diff --git a/src/mainboard/amd/dinar/agesawrapper.h b/src/mainboard/amd/dinar/agesawrapper.h index 70cf4f6..e4deb1b 100644 --- a/src/mainboard/amd/dinar/agesawrapper.h +++ b/src/mainboard/amd/dinar/agesawrapper.h @@ -25,44 +25,44 @@ #include "AGESA.h"
/* Define AMD Ontario APPU SSID/SVID */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS -#define MMIO_NP_BIT BIT7 +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS +#define MMIO_NP_BIT BIT7
/* Hudson-2 ACPI PmIO Space Define */ -#define SB_ACPI_BASE_ADDRESS 0x0400 -#define ACPI_MMIO_BASE 0xFED80000 -#define SB_CFG_BASE 0x000 // DWORD -#define GPIO_BASE 0x100 // BYTE -#define SMI_BASE 0x200 // DWORD -#define PMIO_BASE 0x300 // DWORD -#define PMIO2_BASE 0x400 // BYTE -#define BIOS_RAM_BASE 0x500 // BYTE -#define CMOS_RAM_BASE 0x600 // BYTE -#define CMOS_BASE 0x700 // BYTE -#define ASF_BASE 0x900 // DWORD -#define SMBUS_BASE 0xA00 // DWORD -#define WATCHDOG_BASE 0xB00 // ?? -#define HPET_BASE 0xC00 // DWORD -#define IOMUX_BASE 0xD00 // BYTE -#define MISC_BASE 0xE00 -#define SERIAL_DEBUG_BASE 0x1000 -#define GFX_DAC_BASE 0x1400 -#define CEC_BASE 0x1800 -#define XHCI_BASE 0x1C00 -#define ACPI_SMI_DATA_PORT 0xB1 -#define R_SB_ACPI_PM1_STATUS 0x00 -#define R_SB_ACPI_PM1_ENABLE 0x02 -#define R_SB_ACPI_PM_CONTROL 0x04 -#define R_SB_ACPI_EVENT_STATUS 0x20 -#define R_SB_ACPI_EVENT_ENABLE 0x24 -#define B_PWR_BTN_STATUS BIT8 -#define B_WAKEUP_STATUS BIT15 -#define B_SCI_EN BIT0 -#define SB_PM_INDEX_PORT 0xCD6 -#define SB_PM_DATA_PORT 0xCD7 -#define SB_PMIOA_REG24 0x24 // AcpiMmioEn +#define SB_ACPI_BASE_ADDRESS 0x0400 +#define ACPI_MMIO_BASE 0xFED80000 +#define SB_CFG_BASE 0x000 // DWORD +#define GPIO_BASE 0x100 // BYTE +#define SMI_BASE 0x200 // DWORD +#define PMIO_BASE 0x300 // DWORD +#define PMIO2_BASE 0x400 // BYTE +#define BIOS_RAM_BASE 0x500 // BYTE +#define CMOS_RAM_BASE 0x600 // BYTE +#define CMOS_BASE 0x700 // BYTE +#define ASF_BASE 0x900 // DWORD +#define SMBUS_BASE 0xA00 // DWORD +#define WATCHDOG_BASE 0xB00 // ?? +#define HPET_BASE 0xC00 // DWORD +#define IOMUX_BASE 0xD00 // BYTE +#define MISC_BASE 0xE00 +#define SERIAL_DEBUG_BASE 0x1000 +#define GFX_DAC_BASE 0x1400 +#define CEC_BASE 0x1800 +#define XHCI_BASE 0x1C00 +#define ACPI_SMI_DATA_PORT 0xB1 +#define R_SB_ACPI_PM1_STATUS 0x00 +#define R_SB_ACPI_PM1_ENABLE 0x02 +#define R_SB_ACPI_PM_CONTROL 0x04 +#define R_SB_ACPI_EVENT_STATUS 0x20 +#define R_SB_ACPI_EVENT_ENABLE 0x24 +#define B_PWR_BTN_STATUS BIT8 +#define B_WAKEUP_STATUS BIT15 +#define B_SCI_EN BIT0 +#define SB_PM_INDEX_PORT 0xCD6 +#define SB_PM_DATA_PORT 0xCD7 +#define SB_PMIOA_REG24 0x24 // AcpiMmioEn #define MmioAddress( BaseAddr, Register ) \ ( (UINTN)BaseAddr + \ (UINTN)(Register) \ diff --git a/src/mainboard/amd/dinar/buildOpts.c b/src/mainboard/amd/dinar/buildOpts.c index 958764e..88e3c6f 100644 --- a/src/mainboard/amd/dinar/buildOpts.c +++ b/src/mainboard/amd/dinar/buildOpts.c @@ -33,8 +33,8 @@ * @e $Revision: 6049 $ @e $Date: 2008-05-14 01:58:02 -0500 (Wed, 14 May 2008) $ */ #include <stdlib.h> -#include "AGESA.h" -#include "CommonReturns.h" +#include "AGESA.h" +#include "CommonReturns.h" #include "Filecode.h" #define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE //#define OPTION_HW_DQS_REC_EN_TRAINING TRUE @@ -42,15 +42,15 @@ * coreboot enable -Wundef option, so we should make sure we have all contanstand defined */ /* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 ///< DDR 400 -#define DDR533_FREQUENCY 266 ///< DDR 533 -#define DDR667_FREQUENCY 333 ///< DDR 667 -#define DDR800_FREQUENCY 400 ///< DDR 800 -#define DDR1066_FREQUENCY 533 ///< DDR 1066 -#define DDR1333_FREQUENCY 667 ///< DDR 1333 -#define DDR1600_FREQUENCY 800 ///< DDR 1600 -#define DDR1866_FREQUENCY 933 ///< DDR 1866 -#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency
/* QUANDRANK_TYPE */ #define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM diff --git a/src/mainboard/amd/dinar/platform_cfg.h b/src/mainboard/amd/dinar/platform_cfg.h index 94f4f0c..0aa3743 100644 --- a/src/mainboard/amd/dinar/platform_cfg.h +++ b/src/mainboard/amd/dinar/platform_cfg.h @@ -31,13 +31,13 @@ * Enable check for PCIe endpoint to be ready for PCI enumeration. * */ -//#define EPREADY_WORKAROUND_DISABLED +//#define EPREADY_WORKAROUND_DISABLED
/** * Enable IOMMU support. Initialize IOMMU subsystem, generate IVRS ACPI table. * */ -#define IOMMU_SUPPORT_DISABLE //TODO: enable it +#define IOMMU_SUPPORT_DISABLE //TODO: enable it
/** * Disable server PCIe hotplug support.