Kenneth Chan has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/59832 )
Change subject: test ......................................................................
test
Change-Id: I59f232340e3f2b579452d3b290bc0e82d9950282 --- M src/mainboard/google/guybrush/variants/dewatt/overridetree.cb 1 file changed, 61 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/32/59832/1
diff --git a/src/mainboard/google/guybrush/variants/dewatt/overridetree.cb b/src/mainboard/google/guybrush/variants/dewatt/overridetree.cb index 5a0ad98..84faa62 100644 --- a/src/mainboard/google/guybrush/variants/dewatt/overridetree.cb +++ b/src/mainboard/google/guybrush/variants/dewatt/overridetree.cb @@ -1,4 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-or-later +fw_config + field KB_BL 0 + option KB_BL_ABSENT 0 + option KB_BL_PRESENT 1 + end +end
chip soc/amd/cezanne device domain 0 on @@ -53,5 +59,60 @@ register "probed" = "1" device i2c 15 on end end + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Synaptics Touchpad"" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_9)" + register "generic.wake" = "GEVENT_22" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 2c on end + end end # I2C0 + device ref i2c_1 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN6918"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_89)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_121)" + register "generic.reset_delay_ms" = "20" + register "generic.reset_off_delay_ms" = "2" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_120)" + register "generic.stop_delay_ms" = "280" + register "generic.stop_off_delay_ms" = "2" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_68)" + register "generic.enable_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 10 on end + end + end # I2C1 + device ref i2c_2 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)" + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + chip drivers/i2c/generic + register "hid" = ""10EC1019"" + register "desc" = ""Realtek SPK AMP L"" + register "uid" = "0" + register "probed" = "1" + device i2c 2a on end + end + chip drivers/i2c/generic + register "hid" = ""10EC1019"" + register "desc" = ""Realtek SPK AMP R"" + register "uid" = "1" + device i2c 29 on end + end + end # I2C2 end # chip soc/amd/cezanne