[coreboot-gerrit] Patch merged into coreboot/master: sb/ich7: Use common/gpio.h to set up GPIOs

the following patch was just integrated into master:
commit 62902ca45de871aa59657dd8ec1858c301595634
Author: Arthur Heymans 
Date:   Tue Nov 29 14:13:43 2016 +0100

sb/ich7: Use common/gpio.h to set up GPIOs

This is more consistent with newer Intel targets.

This a static struct so it is initialized to 0 by default.
    To make it more readable:
    * only setting to GPIO mode is made explicit;
    * only pins in GPIO mode are either set to input or output since this
      is ignored in native mode;
    * only output pins are set high or low, since this is read-only on
      input;
    * blink is only operational on output pins, non-blink is not set
      explicitly;
    * invert is only operational on input pins, non-invert is not set
      explicitly.

Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e
    Signed-off-by: Arthur Heymans 
    Reviewed-on: https://review.coreboot.org/17639
    Tested-by: build bot (Jenkins)
    Reviewed-by: Nico Huber 
    Reviewed-by: Patrick Rudolph 
    Reviewed-by: Paul Menzel

See https://review.coreboot.org/17639 for details.

-gerrit