[coreboot-gerrit] Change in coreboot[master]: mb/google/kohaku: Set reset hold time for I2C digitizer device

[shkim (Code Review)]

Hello Tim Wawrzynczak, build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/37911

to look at the new patch set (#2).

Change subject: mb/google/kohaku: Set reset hold time for I2C digitizer device
......................................................................

mb/google/kohaku: Set reset hold time for I2C digitizer device

According to device's spec, we should hold reset assertion for 100ms in
its power on sequence. This change passes the hold time amount to driver
for it.

BUG=b:129159369
BRANCH=firmware-hatch-12672.B
TEST=Checked the reset signal timing in digitizer device's power on sequence

Signed-off-by: Seunghwan Kim 
Change-Id: Iccb33c13c9a390a2c971325c74c0c4ad4b08618e
---
M src/mainboard/google/hatch/variants/kohaku/overridetree.cb
1 file changed, 2 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/11/37911/2