Aaron Durbin has submitted this change. ( https://review.coreboot.org/c/coreboot/+/44107 )
Change subject: mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI node ......................................................................
mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI node
a. USI_REPORT_EN is no longer set to high in coreboot. Instead GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this pad as required. b. Add Delay after stop_gpio Low - 300ms
BUG=b:162263398
Signed-off-by: Lucas Chen lucas.chen@quanta.corp-partner.google.com Change-Id: I3d4dcb6e5cae5d9515abfd415315ec4114ca80b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44107 Reviewed-by: Aaron Durbin adurbin@chromium.org Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/mainboard/google/zork/variants/ezkinil/overridetree.cb 1 file changed, 3 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Aaron Durbin: Looks good to me, approved
diff --git a/src/mainboard/google/zork/variants/ezkinil/overridetree.cb b/src/mainboard/google/zork/variants/ezkinil/overridetree.cb index b06f4bc..1808a0f 100644 --- a/src/mainboard/google/zork/variants/ezkinil/overridetree.cb +++ b/src/mainboard/google/zork/variants/ezkinil/overridetree.cb @@ -88,7 +88,10 @@ register "generic.irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_12)" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)" register "generic.reset_delay_ms" = "20" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_144)" + register "generic.stop_delay_ms" = "300" register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end