[coreboot-gerrit] Change in coreboot[master]: src/mainboard/herobrine: Add support for hoglin QUP FW for I2C and SPI

[Ravi kumar (Code Review)]

Ravi kumar has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/58978 )

Change subject: src/mainboard/herobrine: Add support for hoglin QUP FW for I2C and SPI
......................................................................

src/mainboard/herobrine: Add support for hoglin QUP FW for I2C and SPI

Loading QUP FW for hoglin configuration for I2C, SPI and UART.

BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.

Signed-off-by: Ravi Kumar Bokka 
Change-Id: I08b1d38fef84ef341809a901e2287f70ca5a0314
---
M src/mainboard/google/herobrine/mainboard.c
1 file changed, 1 insertion(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/78/58978/1

diff --git a/src/mainboard/google/herobrine/mainboard.c b/src/mainboard/google/herobrine/mainboard.c
index 23f1ba3..3171ff4 100644
--- a/src/mainboard/google/herobrine/mainboard.c
+++ b/src/mainboard/google/herobrine/mainboard.c
@@ -77,7 +77,7 @@
    	qupv3_se_fw_load_and_init(QUPV3_0_SE2, SE_PROTOCOL_I2C, MIXED);
    	/* Fingerprint SPI */
    	qupv3_se_fw_load_and_init(QUPV3_1_SE3, SE_PROTOCOL_SPI, MIXED);
-	} else if (CONFIG(BOARD_GOOGLE_PIGLIN)) {
+	} else if (CONFIG(BOARD_GOOGLE_PIGLIN) || CONFIG(BOARD_GOOGLE_HOGLIN)) {
    	/* APPS I2C */
    	qupv3_se_fw_load_and_init(QUPV3_0_SE1, SE_PROTOCOL_I2C, GSI);
    	/* ESIM SPI */