[coreboot-gerrit] Change in coreboot[master]: mb/kontron/mal10: Use mainboard_ops driver for GPIO configuration

[Felix Singer (Code Review)]

Hello build bot (Jenkins), Nico Huber, Maxim Polyakov, Angel Pons,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/48143

to look at the new patch set (#7).

Change subject: mb/kontron/mal10: Use mainboard_ops driver for GPIO configuration
......................................................................

mb/kontron/mal10: Use mainboard_ops driver for GPIO configuration

`mainboard_silicon_init_params()` should *only* be used for configuring
FSP options which can not be configured anywhere else. Therefore, use
the init phase from the mainboard_ops driver for configuring the GPIOs.

Signed-off-by: Felix Singer 
Change-Id: Ia01091938ac113cb5cf95f046609a1ebf3620806
---
M src/mainboard/kontron/mal10/ramstage.c
1 file changed, 9 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/43/48143/7