Angel Pons has submitted this change. ( https://review.coreboot.org/c/coreboot/+/50539 )
Change subject: haswell boards: Correct USB config indentation ......................................................................
haswell boards: Correct USB config indentation
Change-Id: I72b717a41c5611cf578ce178722029b8646cbb35 Signed-off-by: Angel Pons th3fanbus@gmail.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/50539 Reviewed-by: Arthur Heymans arthur@aheymans.xyz Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/mainboard/asrock/b85m_pro4/romstage.c M src/mainboard/asrock/h81m-hds/romstage.c M src/mainboard/google/beltino/romstage.c M src/mainboard/google/slippy/variants/falco/romstage.c M src/mainboard/google/slippy/variants/leon/romstage.c M src/mainboard/google/slippy/variants/peppy/romstage.c M src/mainboard/google/slippy/variants/wolf/romstage.c M src/mainboard/hp/folio_9480m/romstage.c M src/mainboard/intel/baskingridge/romstage.c M src/mainboard/lenovo/t440p/romstage.c M src/mainboard/msi/h81m-p33/romstage.c M src/mainboard/supermicro/x10slm-f/romstage.c 12 files changed, 314 insertions(+), 314 deletions(-)
Approvals: build bot (Jenkins): Verified Arthur Heymans: Looks good to me, approved
diff --git a/src/mainboard/asrock/b85m_pro4/romstage.c b/src/mainboard/asrock/b85m_pro4/romstage.c index 16f3d0a..1c17fcb 100644 --- a/src/mainboard/asrock/b85m_pro4/romstage.c +++ b/src/mainboard/asrock/b85m_pro4/romstage.c @@ -25,29 +25,29 @@ spd_map[3] = 0xa6; }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 2, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 2, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - { 1, 0 }, - { 1, 0 }, - { 1, 1 }, - { 1, 1 }, - { 1, 2 }, - { 1, 2 }, - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + { 1, 0 }, + { 1, 0 }, + { 1, 1 }, + { 1, 1 }, + { 1, 2 }, + { 1, 2 }, +}; diff --git a/src/mainboard/asrock/h81m-hds/romstage.c b/src/mainboard/asrock/h81m-hds/romstage.c index b8ecd43..16b1500 100644 --- a/src/mainboard/asrock/h81m-hds/romstage.c +++ b/src/mainboard/asrock/h81m-hds/romstage.c @@ -23,30 +23,30 @@ spd_map[2] = 0xa4; }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 2, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 2, USB_PORT_BACK_PANEL }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 2, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 2, USB_PORT_BACK_PANEL }, + { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, + { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, + { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, + { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - /* Enable, OCn# */ - { 1, 0 }, - { 1, 0 }, - { 0, USB_OC_PIN_SKIP }, - { 0, USB_OC_PIN_SKIP }, - { 0, USB_OC_PIN_SKIP }, - { 0, USB_OC_PIN_SKIP }, - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + /* Enable, OCn# */ + { 1, 0 }, + { 1, 0 }, + { 0, USB_OC_PIN_SKIP }, + { 0, USB_OC_PIN_SKIP }, + { 0, USB_OC_PIN_SKIP }, + { 0, USB_OC_PIN_SKIP }, +}; diff --git a/src/mainboard/google/beltino/romstage.c b/src/mainboard/google/beltino/romstage.c index f009f5a..dda2edc 100644 --- a/src/mainboard/google/beltino/romstage.c +++ b/src/mainboard/google/beltino/romstage.c @@ -46,30 +46,30 @@ spd_map[2] = 0xa4; }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0064, 1, 0, /* P0: VP8 */ - USB_PORT_MINI_PCIE }, - { 0x0040, 1, 0, /* P1: Port A, CN22 */ - USB_PORT_INTERNAL }, - { 0x0040, 1, 1, /* P2: Port B, CN23 */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: WLAN */ - USB_PORT_INTERNAL }, - { 0x0040, 1, 2, /* P4: Port C, CN25 */ - USB_PORT_INTERNAL }, - { 0x0040, 1, 2, /* P5: Port D, CN25 */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: Card Reader */ - USB_PORT_INTERNAL }, - { 0x0000, 0, 0, /* P7: N/C */ - USB_PORT_SKIP }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0064, 1, 0, /* P0: VP8 */ + USB_PORT_MINI_PCIE }, + { 0x0040, 1, 0, /* P1: Port A, CN22 */ + USB_PORT_INTERNAL }, + { 0x0040, 1, 1, /* P2: Port B, CN23 */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: WLAN */ + USB_PORT_INTERNAL }, + { 0x0040, 1, 2, /* P4: Port C, CN25 */ + USB_PORT_INTERNAL }, + { 0x0040, 1, 2, /* P5: Port D, CN25 */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: Card Reader */ + USB_PORT_INTERNAL }, + { 0x0000, 0, 0, /* P7: N/C */ + USB_PORT_SKIP }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - /* Enable, OCn# */ - { 1, 0 }, /* P1; CN22 */ - { 1, 1 }, /* P2; CN23 */ - { 1, 2 }, /* P3; CN25 */ - { 1, 2 }, /* P4; CN25 */ - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; CN22 */ + { 1, 1 }, /* P2; CN23 */ + { 1, 2 }, /* P3; CN25 */ + { 1, 2 }, /* P4; CN25 */ +}; diff --git a/src/mainboard/google/slippy/variants/falco/romstage.c b/src/mainboard/google/slippy/variants/falco/romstage.c index de0ac76..8870fae 100644 --- a/src/mainboard/google/slippy/variants/falco/romstage.c +++ b/src/mainboard/google/slippy/variants/falco/romstage.c @@ -48,30 +48,30 @@ } }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0064, 1, 0, /* P0: Port A, CN8 */ - USB_PORT_BACK_PANEL }, - { 0x0052, 1, 0, /* P1: Port B, CN9 */ - USB_PORT_BACK_PANEL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P2: CCD */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P5: TOUCH */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ - USB_PORT_INTERNAL }, - { 0x0123, 1, 3, /* P7: USB2 Port */ - USB_PORT_INTERNAL }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0064, 1, 0, /* P0: Port A, CN8 */ + USB_PORT_BACK_PANEL }, + { 0x0052, 1, 0, /* P1: Port B, CN9 */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P2: CCD */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P5: TOUCH */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ + USB_PORT_INTERNAL }, + { 0x0123, 1, 3, /* P7: USB2 Port */ + USB_PORT_INTERNAL }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - /* Enable, OCn# */ - { 1, 0 }, /* P1; Port A, CN8 */ - { 1, 0 }, /* P2; Port B, CN9 */ - { 0, USB_OC_PIN_SKIP }, /* P3; */ - { 0, USB_OC_PIN_SKIP }, /* P4; */ - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; Port A, CN8 */ + { 1, 0 }, /* P2; Port B, CN9 */ + { 0, USB_OC_PIN_SKIP }, /* P3; */ + { 0, USB_OC_PIN_SKIP }, /* P4; */ +}; diff --git a/src/mainboard/google/slippy/variants/leon/romstage.c b/src/mainboard/google/slippy/variants/leon/romstage.c index daf0c16..49961d9 100644 --- a/src/mainboard/google/slippy/variants/leon/romstage.c +++ b/src/mainboard/google/slippy/variants/leon/romstage.c @@ -44,30 +44,30 @@ spd_file + (spd_index * spd_len), spd_len); }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, /* P0: Port A, CN10 */ - USB_PORT_BACK_PANEL }, - { 0x0040, 1, 2, /* P1: Port B, CN11 */ - USB_PORT_BACK_PANEL }, - { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ - USB_PORT_MINI_PCIE }, - { 0x0080, 1, USB_OC_PIN_SKIP, /* P4: SD Card */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P5: LTE */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SIM CARD */ - USB_PORT_FLEX }, - { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ - USB_PORT_SKIP }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, /* P0: Port A, CN10 */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, 2, /* P1: Port B, CN11 */ + USB_PORT_BACK_PANEL }, + { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ + USB_PORT_MINI_PCIE }, + { 0x0080, 1, USB_OC_PIN_SKIP, /* P4: SD Card */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P5: LTE */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SIM CARD */ + USB_PORT_FLEX }, + { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ + USB_PORT_SKIP }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - /* Enable, OCn# */ - { 1, 0 }, /* P1; Port A, CN10 */ - { 1, 2 }, /* P2; Port B, CN11 */ - { 0, USB_OC_PIN_SKIP }, /* P3; */ - { 0, USB_OC_PIN_SKIP }, /* P4; */ - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; Port A, CN10 */ + { 1, 2 }, /* P2; Port B, CN11 */ + { 0, USB_OC_PIN_SKIP }, /* P3; */ + { 0, USB_OC_PIN_SKIP }, /* P4; */ +}; diff --git a/src/mainboard/google/slippy/variants/peppy/romstage.c b/src/mainboard/google/slippy/variants/peppy/romstage.c index 535c07b..8a3486a 100644 --- a/src/mainboard/google/slippy/variants/peppy/romstage.c +++ b/src/mainboard/google/slippy/variants/peppy/romstage.c @@ -62,30 +62,30 @@ } }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0150, 1, USB_OC_PIN_SKIP, /* P0: LTE */ - USB_PORT_MINI_PCIE }, - { 0x0040, 1, 0, /* P1: Port A, CN10 */ - USB_PORT_BACK_PANEL }, - { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ - USB_PORT_MINI_PCIE }, - { 0x0040, 1, 2, /* P4: Port B, CN6 */ - USB_PORT_BACK_PANEL }, - { 0x0000, 0, USB_OC_PIN_SKIP, /* P5: EMPTY */ - USB_PORT_SKIP }, - { 0x0150, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ - USB_PORT_FLEX }, - { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ - USB_PORT_SKIP }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0150, 1, USB_OC_PIN_SKIP, /* P0: LTE */ + USB_PORT_MINI_PCIE }, + { 0x0040, 1, 0, /* P1: Port A, CN10 */ + USB_PORT_BACK_PANEL }, + { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ + USB_PORT_MINI_PCIE }, + { 0x0040, 1, 2, /* P4: Port B, CN6 */ + USB_PORT_BACK_PANEL }, + { 0x0000, 0, USB_OC_PIN_SKIP, /* P5: EMPTY */ + USB_PORT_SKIP }, + { 0x0150, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ + USB_PORT_FLEX }, + { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ + USB_PORT_SKIP }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - /* Enable, OCn# */ - { 1, 0 }, /* P1; Port A, CN6 */ - { 0, USB_OC_PIN_SKIP }, /* P2; */ - { 0, USB_OC_PIN_SKIP }, /* P3; */ - { 0, USB_OC_PIN_SKIP }, /* P4; */ - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; Port A, CN6 */ + { 0, USB_OC_PIN_SKIP }, /* P2; */ + { 0, USB_OC_PIN_SKIP }, /* P3; */ + { 0, USB_OC_PIN_SKIP }, /* P4; */ +}; diff --git a/src/mainboard/google/slippy/variants/wolf/romstage.c b/src/mainboard/google/slippy/variants/wolf/romstage.c index 40ff9c2..9080f46 100644 --- a/src/mainboard/google/slippy/variants/wolf/romstage.c +++ b/src/mainboard/google/slippy/variants/wolf/romstage.c @@ -48,30 +48,30 @@ } }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, /* P0: Port A, CN10 */ - USB_PORT_BACK_PANEL }, - { 0x0040, 1, 2, /* P1: Port B, CN11 */ - USB_PORT_BACK_PANEL }, - { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ - USB_PORT_INTERNAL }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ - USB_PORT_MINI_PCIE }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */ - USB_PORT_INTERNAL }, - { 0x0000, 1, USB_OC_PIN_SKIP, /* P5: EMPTY */ - USB_PORT_SKIP }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ - USB_PORT_INTERNAL }, - { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ - USB_PORT_SKIP }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, /* P0: Port A, CN10 */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, 2, /* P1: Port B, CN11 */ + USB_PORT_BACK_PANEL }, + { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ + USB_PORT_INTERNAL }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ + USB_PORT_MINI_PCIE }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */ + USB_PORT_INTERNAL }, + { 0x0000, 1, USB_OC_PIN_SKIP, /* P5: EMPTY */ + USB_PORT_SKIP }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ + USB_PORT_INTERNAL }, + { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ + USB_PORT_SKIP }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - /* Enable, OCn# */ - { 1, 0 }, /* P1; Port A, CN10 */ - { 1, 2 }, /* P2; Port B, CN11 */ - { 0, USB_OC_PIN_SKIP }, /* P3; */ - { 0, USB_OC_PIN_SKIP }, /* P4; */ - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; Port A, CN10 */ + { 1, 2 }, /* P2; Port B, CN11 */ + { 0, USB_OC_PIN_SKIP }, /* P3; */ + { 0, USB_OC_PIN_SKIP }, /* P4; */ +}; diff --git a/src/mainboard/hp/folio_9480m/romstage.c b/src/mainboard/hp/folio_9480m/romstage.c index 0c4308b..496005d 100644 --- a/src/mainboard/hp/folio_9480m/romstage.c +++ b/src/mainboard/hp/folio_9480m/romstage.c @@ -23,21 +23,21 @@ spd_map[2] = 0xa4; }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* dock */ - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* left, EHCI debug */ - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* right */ - { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, /* WLAN */ - { 0x0110, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* SmartCard */ - { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, /* WWAN */ - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* Webcam */ - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* dock */ + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* left, EHCI debug */ + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* right */ + { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, /* WLAN */ + { 0x0110, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* SmartCard */ + { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, /* WWAN */ + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* Webcam */ + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - { 1, USB_OC_PIN_SKIP }, /* dock */ - { 1, USB_OC_PIN_SKIP }, /* left */ - { 1, USB_OC_PIN_SKIP }, /* right */ - { 0, USB_OC_PIN_SKIP }, - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + { 1, USB_OC_PIN_SKIP }, /* dock */ + { 1, USB_OC_PIN_SKIP }, /* left */ + { 1, USB_OC_PIN_SKIP }, /* right */ + { 0, USB_OC_PIN_SKIP }, +}; diff --git a/src/mainboard/intel/baskingridge/romstage.c b/src/mainboard/intel/baskingridge/romstage.c index 9c4c9b7..dc1f50f 100644 --- a/src/mainboard/intel/baskingridge/romstage.c +++ b/src/mainboard/intel/baskingridge/romstage.c @@ -49,44 +49,44 @@ spd_map[3] = 0xa6; }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, /* P0: Back USB3 port (OC0) */ - USB_PORT_BACK_PANEL }, - { 0x0040, 1, 0, /* P1: Back USB3 port (OC0) */ - USB_PORT_BACK_PANEL }, - { 0x0040, 1, 1, /* P2: Flex Port on bottom (OC1) */ - USB_PORT_FLEX }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: Dock connector */ - USB_PORT_DOCK }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: Mini PCIE */ - USB_PORT_MINI_PCIE }, - { 0x0040, 1, 1, /* P5: USB eSATA header (OC1) */ - USB_PORT_FLEX }, - { 0x0040, 1, 3, /* P6: Front Header J8H2 (OC3) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 3, /* P7: Front Header J8H2 (OC3) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 4, /* P8: USB/LAN Jack (OC4) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 4, /* P9: USB/LAN Jack (OC4) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 5, /* P10: Front Header J7H3 (OC5) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 5, /* P11: Front Header J7H3 (OC5) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 6, /* P12: USB/DP Jack (OC6) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 6, /* P13: USB/DP Jack (OC6) */ - USB_PORT_FRONT_PANEL }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, /* P0: Back USB3 port (OC0) */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, 0, /* P1: Back USB3 port (OC0) */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, 1, /* P2: Flex Port on bottom (OC1) */ + USB_PORT_FLEX }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: Dock connector */ + USB_PORT_DOCK }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: Mini PCIE */ + USB_PORT_MINI_PCIE }, + { 0x0040, 1, 1, /* P5: USB eSATA header (OC1) */ + USB_PORT_FLEX }, + { 0x0040, 1, 3, /* P6: Front Header J8H2 (OC3) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 3, /* P7: Front Header J8H2 (OC3) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 4, /* P8: USB/LAN Jack (OC4) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 4, /* P9: USB/LAN Jack (OC4) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 5, /* P10: Front Header J7H3 (OC5) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 5, /* P11: Front Header J7H3 (OC5) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 6, /* P12: USB/DP Jack (OC6) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 6, /* P13: USB/DP Jack (OC6) */ + USB_PORT_FRONT_PANEL }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - /* Enable, OCn# */ - { 1, 0 }, /* P1; */ - { 1, 0 }, /* P2; */ - { 1, 0 }, /* P3; */ - { 1, 0 }, /* P4; */ - { 1, 0 }, /* P6; */ - { 1, 0 }, /* P6; */ - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; */ + { 1, 0 }, /* P2; */ + { 1, 0 }, /* P3; */ + { 1, 0 }, /* P4; */ + { 1, 0 }, /* P6; */ + { 1, 0 }, /* P6; */ +}; diff --git a/src/mainboard/lenovo/t440p/romstage.c b/src/mainboard/lenovo/t440p/romstage.c index eaee734..7aca7c5 100644 --- a/src/mainboard/lenovo/t440p/romstage.c +++ b/src/mainboard/lenovo/t440p/romstage.c @@ -46,29 +46,29 @@ spd_map[2] = 0xa2; }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, /* USB3 */ - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, /* USB3 */ - { 0x0110, 1, 1, USB_PORT_BACK_PANEL }, /* USB2 charge */ - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, - { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_DOCK }, - { 0x0080, 1, 2, USB_PORT_BACK_PANEL }, /* USB2 */ - { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0110, 1, 4, USB_PORT_BACK_PANEL }, /* WWAN */ - { 0x0040, 1, 5, USB_PORT_INTERNAL }, /* WLAN */ - { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, /* webcam */ - { 0x0080, 1, 6, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, /* USB3 */ + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, /* USB3 */ + { 0x0110, 1, 1, USB_PORT_BACK_PANEL }, /* USB2 charge */ + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, + { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_DOCK }, + { 0x0080, 1, 2, USB_PORT_BACK_PANEL }, /* USB2 */ + { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0110, 1, 4, USB_PORT_BACK_PANEL }, /* WWAN */ + { 0x0040, 1, 5, USB_PORT_INTERNAL }, /* WLAN */ + { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, /* webcam */ + { 0x0080, 1, 6, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - { 1, 0 }, - { 1, 0 }, - { 1, USB_OC_PIN_SKIP }, - { 1, USB_OC_PIN_SKIP }, - { 1, 1 }, - { 1, 1 }, /* WWAN */ - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + { 1, 0 }, + { 1, 0 }, + { 1, USB_OC_PIN_SKIP }, + { 1, USB_OC_PIN_SKIP }, + { 1, 1 }, + { 1, 1 }, /* WWAN */ +}; diff --git a/src/mainboard/msi/h81m-p33/romstage.c b/src/mainboard/msi/h81m-p33/romstage.c index 56c77cd..9bcb400 100644 --- a/src/mainboard/msi/h81m-p33/romstage.c +++ b/src/mainboard/msi/h81m-p33/romstage.c @@ -23,29 +23,29 @@ spd_map[2] = 0xa4; }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 2, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 2, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 3, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 5, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - { 1, 0 }, - { 1, 0 }, - { 1, 1 }, - { 1, 1 }, - { 1, 2 }, - { 1, 2 }, - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + { 1, 0 }, + { 1, 0 }, + { 1, 1 }, + { 1, 1 }, + { 1, 2 }, + { 1, 2 }, +}; diff --git a/src/mainboard/supermicro/x10slm-f/romstage.c b/src/mainboard/supermicro/x10slm-f/romstage.c index a2798d9..36f79a3 100644 --- a/src/mainboard/supermicro/x10slm-f/romstage.c +++ b/src/mainboard/supermicro/x10slm-f/romstage.c @@ -25,30 +25,30 @@ spd_map[3] = 0xa6; }
- const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, USB_PORT_INTERNAL }, - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, - { 0x0110, 1, 1, USB_PORT_BACK_PANEL }, - { 0x0110, 1, 1, USB_PORT_BACK_PANEL }, - { 0x0110, 1, 2, USB_PORT_BACK_PANEL }, - { 0x0110, 1, 2, USB_PORT_BACK_PANEL }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, - { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, - }; +const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, USB_PORT_INTERNAL }, + { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, + { 0x0110, 1, 1, USB_PORT_BACK_PANEL }, + { 0x0110, 1, 1, USB_PORT_BACK_PANEL }, + { 0x0110, 1, 2, USB_PORT_BACK_PANEL }, + { 0x0110, 1, 2, USB_PORT_BACK_PANEL }, + { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, + { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 4, USB_PORT_BACK_PANEL }, + { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, + { 0x0040, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, + { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, + { 0x0040, 1, 6, USB_PORT_BACK_PANEL }, +};
- const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { - /* Enable, OCn# */ - { 1, 1 }, - { 1, 1 }, - { 0, USB_OC_PIN_SKIP }, - { 0, USB_OC_PIN_SKIP }, - { 1, 3 }, - { 1, 3 }, - }; +const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { + /* Enable, OCn# */ + { 1, 1 }, + { 1, 1 }, + { 0, USB_OC_PIN_SKIP }, + { 0, USB_OC_PIN_SKIP }, + { 1, 3 }, + { 1, 3 }, +};