Nicholas Chin has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/87227?usp=email )
Change subject: [RFC][POC] Tree: Add doxygen config files and targets ......................................................................
[RFC][POC] Tree: Add doxygen config files and targets
coreboot used to have targets to build Doxygen documentation, but they were removed in commit 619086d1056c ("Treewide: Remove doxygen config files and targets") after it was decided that the doxygen documentation was dead. Recent discussion on a patch for doc.coreboot.org brought up the issue of how to keep API documentation up to date with the code, and there was some interest in being able to use the docstrings in the code to generate such information. Doxygen is one of the go-to tools for this sort of thing, but the previous attempt at using this required users to run a separate make target to view documentation which may have contributed to its lack of use.
Instead of using doxygen to generate its own separate HTML output directly, there are tools such as Breathe [1] which can take the output of Doxygen and bridge it into Sphinx, which would allow API documentation to be seamlessly integrated into doc.coreboot.org and built automatically. To support this, re-add Doxygen configs and targets, but configure it for XML output which is the format Breathe is able to parse.
[1] https://breathe.readthedocs.io/en/latest/
Change-Id: I7561e08f2c1f27ef34a40f52319058234e138a2a Signed-off-by: Nicholas Chin nic.c3.14@gmail.com --- A Documentation/Doxyfile M Makefile 2 files changed, 2,979 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/27/87227/1
diff --git a/Documentation/Doxyfile b/Documentation/Doxyfile new file mode 100644 index 0000000..61996e9 --- /dev/null +++ b/Documentation/Doxyfile @@ -0,0 +1,2970 @@ +# Doxyfile 1.13.2 + +# This file describes the settings to be used by the documentation system +# Doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" "). +# +# Note: +# +# Use Doxygen to compare the used configuration file with the template +# configuration file: +# doxygen -x [configFile] +# Use Doxygen to compare the used configuration file with the template +# configuration file without replacing the environment variables or CMake type +# replacement variables: +# doxygen -x_noenv [configFile] + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = coreboot + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewers a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# With the PROJECT_ICON tag one can specify an icon that is included in the tabs +# when the HTML document is shown. Doxygen will copy the logo to the output +# directory. + +PROJECT_ICON = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where Doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = Documentation/doxygen + +# If the CREATE_SUBDIRS tag is set to YES then Doxygen will create up to 4096 +# sub-directories (in 2 levels) under the output directory of each output format +# and will distribute the generated files over these directories. Enabling this +# option can be useful when feeding Doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise cause +# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to +# control the number of sub-directories. +# The default value is: NO. + +CREATE_SUBDIRS = YES + +# Controls the number of sub-directories that will be created when +# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every +# level increment doubles the number of directories, resulting in 4096 +# directories at level 8 which is the default and also the maximum value. The +# sub-directories are organized in 2 levels, the first level always has a fixed +# number of 16 directories. +# Minimum value: 0, maximum value: 8, default value: 8. +# This tag requires that the tag CREATE_SUBDIRS is set to YES. + +CREATE_SUBDIRS_LEVEL = 8 + +# If the ALLOW_UNICODE_NAMES tag is set to YES, Doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by Doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, +# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English +# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek, +# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with +# English messages), Korean, Korean-en (Korean with English messages), Latvian, +# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, +# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, +# Swedish, Turkish, Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, Doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, Doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = YES + +# If the INLINE_INHERITED_MEMB tag is set to YES, Doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, Doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which Doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where Doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, Doxygen will generate much shorter (but +# less readable) file names. This can be useful if your file system doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen will interpret the +# first line (until the first dot, question mark or exclamation mark) of a +# Javadoc-style comment as the brief description. If set to NO, the Javadoc- +# style will behave just like regular Qt-style comments (thus requiring an +# explicit @brief command for a brief description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = YES + +# If the JAVADOC_BANNER tag is set to YES then Doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by Doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will interpret the first +# line (until the first dot, question mark or exclamation mark) of a Qt-style +# comment as the brief description. If set to NO, the Qt-style will behave just +# like regular Qt-style comments (thus requiring an explicit \brief command for +# a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# By default Python docstrings are displayed as preformatted text and Doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# Doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as Doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then Doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:^^" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". Note that you cannot put \n's in the value part of an alias +# to insert newlines (in the resulting output). You can put ^^ in the value part +# of an alias to insert a newline as if a physical newline was in the original +# file. When you need a literal { or } or , in the value part of an alias you +# have to escape them by means of a backslash (), this can lead to conflicts +# with the commands { and } for these it is advised to use the version @{ and +# @} or use a double escape (\{ and \}) + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by Doxygen: IDL, Java, JavaScript, +# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, +# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files). For instance to make Doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by Doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then Doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See https://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by Doxygen, so you can +# mix Doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 6. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 6 + +# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to +# generate identifiers for the Markdown headings. Note: Every identifier is +# unique. +# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a +# sequence number starting at 0 and GITHUB use the lower case version of title +# with any whitespace replaced by '-' and punctuation characters removed. +# The default value is: DOXYGEN. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +MARKDOWN_ID_STYLE = DOXYGEN + +# When enabled Doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. Words listed in the +# AUTOLINK_IGNORE_WORDS tag are excluded from automatic linking. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# This tag specifies a list of words that, when matching the start of a word in +# the documentation, will suppress auto links generation, if it is enabled via +# AUTOLINK_SUPPORT. This list does not affect affect links explicitly created +# using # or the \link or commands. +# This tag requires that the tag AUTOLINK_SUPPORT is set to YES. + +AUTOLINK_IGNORE_WORDS = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let Doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also makes the inheritance and +# collaboration diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# https://www.riverbankcomputing.com/software) sources only. Doxygen will parse +# them like normal C++ but will assume all classes use public instead of private +# inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# Doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then Doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, Doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# Doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run Doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +# The NUM_PROC_THREADS specifies the number of threads Doxygen is allowed to use +# during processing. When set to 0 Doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which effectively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + +# If the TIMESTAMP tag is set different from NO then each generated page will +# contain the date or date and time when the page was generated. Setting this to +# NO can help when comparing the output of multiple runs. +# Possible values are: YES, NO, DATETIME and DATE. +# The default value is: NO. + +TIMESTAMP = NO + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, Doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# will also hide undocumented C++ concepts if enabled. This option has no effect +# if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_UNDOC_NAMESPACES tag is set to YES, Doxygen will hide all +# undocumented namespaces that are normally visible in the namespace hierarchy. +# If set to NO, these namespaces will be included in the various overviews. This +# option has no effect if EXTRACT_ALL is enabled. +# The default value is: YES. + +HIDE_UNDOC_NAMESPACES = YES + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all friend +# declarations. If set to NO, these declarations will be included in the +# documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# With the correct setting of option CASE_SENSE_NAMES Doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and macOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. +# Possible values are: SYSTEM, NO and YES. +# The default value is: SYSTEM. + +CASE_SENSE_NAMES = SYSTEM + +# If the HIDE_SCOPE_NAMES tag is set to NO then Doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then Doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class +# will show which file needs to be included to use the class. +# The default value is: YES. + +SHOW_HEADERFILE = YES + +# If the SHOW_INCLUDE_FILES tag is set to YES then Doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then Doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then Doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then Doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then Doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and Doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING Doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# Doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by Doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by Doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents Doxygen's defaults, run Doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. See also section "Changing the +# layout of pages" for information. +# +# Note that if you run Doxygen from a directory containing a file called +# DoxygenLayout.xml, Doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +# The EXTERNAL_TOOL_PATH tag can be used to extend the search path (PATH +# environment variable) so that external tools such as latex and gs can be +# found. +# Note: Directories specified with EXTERNAL_TOOL_PATH are added in front of the +# path already specified by the PATH variable, and are added in the order +# specified. +# Note: This option is particularly useful for macOS version 14 (Sonoma) and +# higher, when running Doxygen from Doxywizard, because in this case any user- +# defined changes to the PATH are ignored. A typical example on macOS is to set +# EXTERNAL_TOOL_PATH = /Library/TeX/texbin /usr/local/bin +# together with the standard path, the full search path used by doxygen when +# launching external tools will then become +# PATH=/Library/TeX/texbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin + +EXTERNAL_TOOL_PATH = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by Doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by Doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then Doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, Doxygen will generate warnings for +# potential errors in the documentation, such as documenting some parameters in +# a documented function twice, or documenting parameters that don't exist or +# using markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# If WARN_IF_INCOMPLETE_DOC is set to YES, Doxygen will warn about incomplete +# function parameter documentation. If set to NO, Doxygen will accept that some +# parameters have no documentation without warning. +# The default value is: YES. + +WARN_IF_INCOMPLETE_DOC = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, Doxygen will only warn about wrong parameter +# documentation, but not about the absence of documentation. If EXTRACT_ALL is +# set to YES then this flag will automatically be disabled. See also +# WARN_IF_INCOMPLETE_DOC +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, Doxygen will warn about +# undocumented enumeration values. If set to NO, Doxygen will accept +# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: NO. + +WARN_IF_UNDOC_ENUM_VAL = NO + +# If WARN_LAYOUT_FILE option is set to YES, Doxygen will warn about issues found +# while parsing the user defined layout file, such as missing or wrong elements. +# See also LAYOUT_FILE for details. If set to NO, problems with the layout file +# will be suppressed. +# The default value is: YES. + +WARN_LAYOUT_FILE = YES + +# If the WARN_AS_ERROR tag is set to YES then Doxygen will immediately stop when +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then Doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the Doxygen process Doxygen will return with a non-zero status. +# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then Doxygen behaves +# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined Doxygen will not +# write the warning messages in between other messages but write them at the end +# of a run, in case a WARN_LOGFILE is defined the warning messages will be +# besides being in the defined file also be shown at the end of a run, unless +# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case +# the behavior will remain as with the setting FAIL_ON_WARNINGS. +# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT. +# The default value is: NO. + +WARN_AS_ERROR = NO + +# The WARN_FORMAT tag determines the format of the warning messages that Doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# See also: WARN_LINE_FORMAT +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# In the $text part of the WARN_FORMAT command it is possible that a reference +# to a more specific place is given. To make it easier to jump to this place +# (outside of Doxygen) the user can define a custom "cut" / "paste" string. +# Example: +# WARN_LINE_FORMAT = "'vi $file +$line'" +# See also: WARN_FORMAT +# The default value is: at line $line of file $file. + +WARN_LINE_FORMAT = "at line $line of file $file" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). In case the file specified cannot be opened for writing the +# warning and error messages are written to standard error. When as file - is +# specified the warning and error messages are written to standard output +# (stdout). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING +# Note: If this tag is empty the current directory is searched. + +INPUT = src + +# This tag can be used to specify the character encoding of the source files +# that Doxygen parses. Internally Doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. +# See also: INPUT_FILE_ENCODING +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# This tag can be used to specify the character encoding of the source files +# that Doxygen parses. The INPUT_FILE_ENCODING tag can be used to specify +# character encoding on a per file pattern basis. Doxygen will compare the file +# name with each pattern and apply the encoding instead of the default +# INPUT_ENCODING if there is a match. The character encodings are a list of the +# form: pattern=encoding (like *.php=ISO-8859-1). +# See also: INPUT_ENCODING for further information on supported encodings. + +INPUT_FILE_ENCODING = + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by Doxygen. +# +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm, +# *.cpp, *.cppm, *.ccm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, +# *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.ixx, *.l, *.cs, *.d, +# *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to +# be provided as Doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. + +FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ + *.cxxm \ + *.cpp \ + *.cppm \ + *.ccm \ + *.c++ \ + *.c++m \ + *.java \ + *.ii \ + *.ixx \ + *.ipp \ + *.i++ \ + *.inl \ + *.idl \ + *.ddl \ + *.odl \ + *.h \ + *.hh \ + *.hxx \ + *.hpp \ + *.h++ \ + *.ixx \ + *.l \ + *.cs \ + *.d \ + *.php \ + *.php4 \ + *.php5 \ + *.phtml \ + *.inc \ + *.m \ + *.markdown \ + *.md \ + *.mm \ + *.dox \ + *.py \ + *.pyw \ + *.f90 \ + *.f95 \ + *.f03 \ + *.f08 \ + *.f18 \ + *.f \ + *.for \ + *.vhd \ + *.vhdl \ + *.ucf \ + *.qsf \ + *.ice + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which Doxygen is +# run. + +EXCLUDE = src/vendorcode + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = */Makefile.mk + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# ANamespace::AClass, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that Doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. +# +# Note that Doxygen will use the data processed and written to standard output +# for further processing, therefore nothing else, like debug statements or used +# commands (so in case of a Windows batch file always use @echo OFF), should be +# written to standard output. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by Doxygen. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by Doxygen. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the Doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +# If the IMPLICIT_DIR_DOCS tag is set to YES, any README.md file found in sub- +# directories of the project's root, is used as the documentation for that sub- +# directory, except when the README.md starts with a \dir, \page or \mainpage +# command. If set to NO, the README.md file needs to start with an explicit \dir +# command in order to be used as directory documentation. +# The default value is: YES. + +IMPLICIT_DIR_DOCS = YES + +# The Fortran standard specifies that for fixed formatted Fortran code all +# characters from position 72 are to be considered as comment. A common +# extension is to allow longer lines before the automatic comment starts. The +# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can +# be processed before the automatic comment starts. +# Minimum value: 7, maximum value: 10000, default value: 72. + +FORTRAN_COMMENT_AFTER = 72 + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# multi-line macros, enums or list initialized variables directly into the +# documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct Doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# entity all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of Doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see https://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by Doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then Doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = YES + +# If the CLANG_ASSISTED_PARSING tag is set to YES then Doxygen will use the +# clang parser (see: +# http://clang.llvm.org/) for more accurate parsing at the cost of reduced +# performance. This can be particularly helpful with template rich C++ code for +# which Doxygen's built-in parser lacks the necessary type information. +# Note: The availability of this option depends on whether or not Doxygen was +# generated with the -Duse_libclang=ON option for CMake. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If the CLANG_ASSISTED_PARSING tag is set to YES and the CLANG_ADD_INC_PATHS +# tag is set to YES then Doxygen will add the directory of each input to the +# include path. +# The default value is: YES. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_ADD_INC_PATHS = YES + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by Doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the directory containing a file called compile_commands.json. This +# file is the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the +# options used when the source files were built. This is equivalent to +# specifying the -p option to a clang tool, such as clang-check. These options +# will then be passed to the parser. Any options specified with CLANG_OPTIONS +# will be added as well. +# Note: The availability of this option depends on whether or not Doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) +# that should be ignored while generating the index headers. The IGNORE_PREFIX +# tag works for classes, function and member names. The entity will be placed in +# the alphabetical list under the first letter of the entity name that remains +# after removing the prefix. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, Doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = NO + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank Doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that Doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that Doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of Doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank Doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that Doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank Doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that Doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by Doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# Note: Since the styling of scrollbars can currently not be overruled in +# Webkit/Chromium, the styling will be left out of the default doxygen.css if +# one or more extra stylesheets have been specified. So if scrollbar +# customization is desired it has to be added explicitly. For an example see the +# documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output +# should be rendered with a dark or light theme. +# Possible values are: LIGHT always generates light mode output, DARK always +# generates dark mode output, AUTO_LIGHT automatically sets the mode according +# to the user preference, uses light mode if no preference is set (the default), +# AUTO_DARK automatically sets the mode according to the user preference, uses +# dark mode if no preference is set and TOGGLE allows a user to switch between +# light and dark mode via a button. +# The default value is: AUTO_LIGHT. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE = AUTO_LIGHT + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a color-wheel, see +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use gray-scales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via JavaScript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have JavaScript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = NO + +# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be +# dynamically folded and expanded in the generated HTML source code. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_CODE_FOLDING = YES + +# If the HTML_COPY_CLIPBOARD tag is set to YES then Doxygen will show an icon in +# the top right corner of code and text fragments that allows the user to copy +# its content to the clipboard. Note this only works if supported by the browser +# and the web page is served via a secure context (see: +# https://www.w3.org/TR/secure-contexts/), i.e. using the https: or file: +# protocol. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COPY_CLIPBOARD = YES + +# Doxygen stores a couple of settings persistently in the browser (via e.g. +# cookies). By default these settings apply to all HTML pages generated by +# Doxygen across all projects. The HTML_PROJECT_COOKIE tag can be used to store +# the settings under a project specific key, such that the user preferences will +# be stored separately. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_PROJECT_COOKIE = + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, Doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag determines the URL of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDURL = + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then Doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# on Windows. In the beginning of 2021 Microsoft took the original page, with +# a.o. the download links, offline (the HTML help workshop was already many +# years in maintenance mode). You can download the HTML help workshop from the +# web archives at Installation executable (see: +# http://web.archive.org/web/20160201063255/http://download.microsoft.com/down... +# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by Doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# Doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the main .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# The SITEMAP_URL tag is used to specify the full URL of the place where the +# generated documentation will be placed on the server by the user during the +# deployment of the documentation. The generated sitemap is called sitemap.xml +# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL +# is specified no sitemap is generated. For information about the sitemap +# protocol see https://www.sitemaps.org +# This tag requires that the tag GENERATE_HTML is set to YES. + +SITEMAP_URL = + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty Doxygen will try to +# run qhelpgenerator on the generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = YES + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine tune the look of the index (see "Fine-tuning the output"). As an +# example, the default style sheet generated by Doxygen has an example that +# shows how to put an image at the root of the tree instead of the PROJECT_NAME. +# Since the tree basically has the same information as the tab index, you could +# consider setting DISABLE_INDEX to YES when enabling this option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = YES + +# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the +# FULL_SIDEBAR option determines if the side bar is limited to only the treeview +# area (value NO) or if it should extend to the full height of the window (value +# YES). Setting this to YES gives a layout similar to +# https://docs.readthedocs.io with more room for contents, but less room for the +# project logo, title, and description. If either GENERATE_TREEVIEW or +# DISABLE_INDEX is set to NO, this option has no effect. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FULL_SIDEBAR = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# Doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# When the SHOW_ENUM_VALUES tag is set doxygen will show the specified +# enumeration values besides the enumeration mnemonics. +# The default value is: NO. + +SHOW_ENUM_VALUES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, Doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# If the OBFUSCATE_EMAILS tag is set to YES, Doxygen will obfuscate email +# addresses. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +OBFUSCATE_EMAILS = YES + +# If the HTML_FORMULA_FORMAT option is set to svg, Doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# Doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands +# to create new LaTeX commands to be used in formulas as building blocks. See +# the section "Including formulas" for details. + +FORMULA_MACROFILE = + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# https://www.mathjax.org) which uses client side JavaScript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# With MATHJAX_VERSION it is possible to specify the MathJax version to be used. +# Note that the different versions of MathJax have different requirements with +# regards to the different settings, so it is possible that also other MathJax +# settings have to be changed when switching between the different MathJax +# versions. +# Possible values are: MathJax_2 and MathJax_3. +# The default value is: MathJax_2. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_VERSION = MathJax_2 + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. For more details about the output format see MathJax +# version 2 (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3 +# (see: +# http://docs.mathjax.org/en/latest/web/components/output.html). +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility. This is the name for Mathjax version 2, for MathJax version 3 +# this will be translated into chtml), NativeMML (i.e. MathML. Only supported +# for MathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# is the name for Mathjax version 3, for MathJax version 2 this will be +# translated into HTML-CSS) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from https://www.mathjax.org before deployment. The default value is: +# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2 +# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3 +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# for MathJax version 2 (see +# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions): +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# For example for MathJax version 3 (see +# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html): +# MATHJAX_EXTENSIONS = ams +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with JavaScript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled Doxygen will generate a search box for +# the HTML output. The underlying search engine uses JavaScript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the JavaScript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using JavaScript. There +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, Doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH tag is enabled Doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: +# https://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: +# https://xapian.org/). See the section "External Indexing and Searching" for +# details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through Doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# Configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES, Doxygen will generate LaTeX output. +# The default value is: YES. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. +# +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_CMD_NAME = + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +MAKEINDEX_CMD_NAME = makeindex + +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash () as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + +# If the COMPACT_LATEX tag is set to YES, Doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for +# the generated LaTeX document. The header should contain everything until the +# first chapter. If it is left blank Doxygen will generate a standard header. It +# is highly recommended to start with a default header using +# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty +# and then modify the file new_header.tex. See also section "Doxygen usage" for +# information on how to generate the default header that Doxygen normally uses. +# +# Note: Only use a user-defined header if you know what you are doing! +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of Doxygen. The following +# commands have a special meaning inside the header (and footer): For a +# description of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for +# the generated LaTeX document. The footer should contain everything after the +# last chapter. If it is left blank Doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. See also section "Doxygen +# usage" for information on how to generate the default footer that Doxygen +# normally uses. Note: Only use a user-defined footer if you know what you are +# doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by Doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, Doxygen will use the engine as +# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX +# files. Set this option to YES, to get a higher quality PDF documentation. +# +# See also section LATEX_CMD_NAME for selecting the engine. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +USE_PDFLATEX = YES + +# The LATEX_BATCHMODE tag signals the behavior of LaTeX in case of an error. +# Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch +# mode nothing is printed on the terminal, errors are scrolled as if <return> is +# hit at every error; missing files that TeX tries to input or request from +# keyboard input (\read on a not open input stream) cause the job to abort, +# NON_STOP In nonstop mode the diagnostic message will appear on the terminal, +# but there is no possibility of user interaction just like in batch mode, +# SCROLL In scroll mode, TeX will stop only for missing files to input or if +# keyboard input is necessary and ERROR_STOP In errorstop mode, TeX will stop at +# each error, asking for user intervention. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BATCHMODE = NO + +# If the LATEX_HIDE_INDICES tag is set to YES then Doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HIDE_INDICES = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. See +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plainnat. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BIB_STYLE = plainnat + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + +#--------------------------------------------------------------------------- +# Configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES, Doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES, Doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to Doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that Doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to Doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTENSIONS_FILE = + +# The RTF_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the RTF_OUTPUT output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTRA_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES, Doxygen will generate man pages for +# classes and files. +# The default value is: NO. + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_EXTENSION = .3 + +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES, Doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. + +GENERATE_XML = YES + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_OUTPUT = xml + +# If the XML_PROGRAMLISTING tag is set to YES, Doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_PROGRAMLISTING = NO + +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, Doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES, Doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES, Doxygen will generate an +# AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to Sqlite3 output +#--------------------------------------------------------------------------- + +# If the GENERATE_SQLITE3 tag is set to YES Doxygen will generate a Sqlite3 +# database with symbols found by Doxygen stored in tables. +# The default value is: NO. + +GENERATE_SQLITE3 = NO + +# The SQLITE3_OUTPUT tag is used to specify where the Sqlite3 database will be +# put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put +# in front of it. +# The default directory is: sqlite3. +# This tag requires that the tag GENERATE_SQLITE3 is set to YES. + +SQLITE3_OUTPUT = sqlite3 + +# The SQLITE3_RECREATE_DB tag is set to YES, the existing doxygen_sqlite3.db +# database file will be recreated with each Doxygen run. If set to NO, Doxygen +# will warn if a database file is already found and not modify it. +# The default value is: YES. +# This tag requires that the tag GENERATE_SQLITE3 is set to YES. + +SQLITE3_RECREATE_DB = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES, Doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES, Doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO, the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES, Doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. + +ENABLE_PREPROCESSING = NO + +# If the MACRO_EXPANSION tag is set to YES, Doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_ONLY_PREDEF = YES + +# If the SEARCH_INCLUDES tag is set to YES, the include files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by the +# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of +# RECURSIVE has no effect here. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES then Doxygen's preprocessor will +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have a unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which Doxygen is +# run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, Doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES, all external classes and namespaces +# will be listed in the class and namespace index. If set to NO, only the +# inherited external classes will be listed. +# The default value is: NO. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the topic index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. + +EXTERNAL_GROUPS = YES + +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + +#--------------------------------------------------------------------------- +# Configuration options related to diagram generator tools +#--------------------------------------------------------------------------- + +# If set to YES the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then Doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz (see: +# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: NO. + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations Doxygen is allowed +# to run in parallel. When set to 0 Doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NUM_THREADS = 0 + +# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of +# subgraphs. When you want a differently looking font in the dot files that +# Doxygen generates you can specify fontname, fontcolor and fontsize attributes. +# For details please see <a href=https://graphviz.org/doc/info/attrs.html>Node, +# Edge and Graph Attributes specification</a> You need to make sure dot is able +# to find the font, which can be done by putting it in a standard location or by +# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. Default graphviz fontsize is 14. +# The default value is: fontname=Helvetica,fontsize=10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_COMMON_ATTR = "fontname=Helvetica,fontsize=10" + +# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can +# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. <a +# href=https://graphviz.org/doc/info/arrows.html%3EComplete documentation about +# arrows shapes.</a> +# The default value is: labelfontname=Helvetica,labelfontsize=10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_EDGE_ATTR = "labelfontname=Helvetica,labelfontsize=10" + +# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes +# around nodes set 'shape=plain' or 'shape=plaintext' <a +# href=https://www.graphviz.org/doc/info/shapes.html%3EShapes specification</a> +# The default value is: shape=box,height=0.2,width=0.4. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4" + +# You can set the path where dot can find font specified with fontname in +# DOT_COMMON_ATTR and others dot attributes. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTPATH = + +# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then Doxygen will +# generate a graph for each documented class showing the direct and indirect +# inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and +# HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case +# the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the +# CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used. +# If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance +# relations will be shown as texts / links. Explicit enabling an inheritance +# graph or choosing a different representation for an inheritance graph of a +# specific class, can be accomplished by means of the command \inheritancegraph. +# Disabling an inheritance graph can be accomplished by means of the command +# \hideinheritancegraph. +# Possible values are: NO, YES, TEXT, GRAPH and BUILTIN. +# The default value is: YES. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH tag is set to YES then Doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. Explicit enabling a collaboration graph, +# when COLLABORATION_GRAPH is set to NO, can be accomplished by means of the +# command \collaborationgraph. Disabling a collaboration graph can be +# accomplished by means of the command \hidecollaborationgraph. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS tag is set to YES then Doxygen will generate a graph for +# groups, showing the direct groups dependencies. Explicit enabling a group +# dependency graph, when GROUP_GRAPHS is set to NO, can be accomplished by means +# of the command \groupgraph. Disabling a directory graph can be accomplished by +# means of the command \hidegroupgraph. See also the chapter Grouping in the +# manual. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES, Doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag UML_LOOK is set to YES. + +UML_LIMIT_NUM_FIELDS = 10 + +# If the DOT_UML_DETAILS tag is set to NO, Doxygen will show attributes and +# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS +# tag is set to YES, Doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, Doxygen +# will not generate fields with class member information in the UML graphs. The +# class diagrams will look similar to the default class diagrams but using UML +# notation for the relationships. +# Possible values are: NO, YES and NONE. +# The default value is: NO. +# This tag requires that the tag UML_LOOK is set to YES. + +DOT_UML_DETAILS = NO + +# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters +# to display on a single line. If the actual line length exceeds this threshold +# significantly it will be wrapped across multiple lines. Some heuristics are +# applied to avoid ugly line breaks. +# Minimum value: 0, maximum value: 1000, default value: 17. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_WRAP_THRESHOLD = 17 + +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +TEMPLATE_RELATIONS = NO + +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then Doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. Explicit enabling an include graph, when INCLUDE_GRAPH is is set to NO, +# can be accomplished by means of the command \includegraph. Disabling an +# include graph can be accomplished by means of the command \hideincludegraph. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDE_GRAPH = YES + +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then Doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. Explicit enabling an included by graph, when INCLUDED_BY_GRAPH is set +# to NO, can be accomplished by means of the command \includedbygraph. Disabling +# an included by graph can be accomplished by means of the command +# \hideincludedbygraph. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH tag is set to YES then Doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH tag is set to YES then Doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY tag is set to YES then Doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH tag is set to YES then Doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. Explicit enabling a directory graph, when +# DIRECTORY_GRAPH is set to NO, can be accomplished by means of the command +# \directorygraph. Disabling a directory graph can be accomplished by means of +# the command \hidedirectorygraph. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DIRECTORY_GRAPH = YES + +# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels +# of child directories generated in directory dependency graphs by dot. +# Minimum value: 1, maximum value: 25, default value: 1. +# This tag requires that the tag DIRECTORY_GRAPH is set to YES. + +DIR_GRAPH_MAX_DEPTH = 1 + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# https://www.graphviz.org/)). +# +# Note the formats svg:cairo and svg:cairo:cairo cannot be used in combination +# with INTERACTIVE_SVG (the INTERACTIVE_SVG will be set to NO). +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus, +# png:gdiplus:gdiplus, svg:cairo, svg:cairo:cairo, svg:svg, svg:svg:core, +# gif:cairo, gif:cairo:gd, gif:cairo:gdiplus, gif:gdiplus, gif:gdiplus:gdiplus, +# gif:gd, gif:gd:gd, jpg:cairo, jpg:cairo:gd, jpg:cairo:gdiplus, jpg:gd, +# jpg:gd:gd, jpg:gdiplus and jpg:gdiplus:gdiplus. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg or svg:svg or svg:svg:core, then this option +# can be set to YES to enable generation of interactive SVG images that allow +# zooming and panning. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# +# Note This option will be automatically disabled when DOT_IMAGE_FORMAT is set +# to svg:cairo or svg:cairo:cairo. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +INTERACTIVE_SVG = NO + +# The DOT_PATH tag can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. + +DOTFILE_DIRS = + +# You can include diagrams made with dia in Doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# When using PlantUML, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file or to the filename of jar file +# to be used. If left blank, it is assumed PlantUML is not used or called during +# a preprocessing step. Doxygen will generate a warning when it encounters a +# \startuml command in this case and will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using PlantUML, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for PlantUML. + +PLANTUML_CFG_FILE = + +# When using PlantUML, the specified paths are searched for files specified by +# the !include statement in a PlantUML block. + +PLANTUML_INCLUDE_PATH = + +# The PLANTUMLFILE_DIRS tag can be used to specify one or more directories that +# contain PlantUml files that are included in the documentation (see the +# \plantumlfile command). + +PLANTUMLFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, Doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES Doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# Note: This tag requires that UML_LOOK isn't set, i.e. the Doxygen internal +# graphical representation for inheritance and collaboration diagrams is used. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES, Doxygen will remove the intermediate +# files that are used to generate the various graphs. +# +# Note: This setting is not only used for dot files but also for msc temporary +# files. +# The default value is: YES. + +DOT_CLEANUP = YES + +# You can define message sequence charts within Doxygen comments using the \msc +# command. If the MSCGEN_TOOL tag is left empty (the default), then Doxygen will +# use a built-in version of mscgen tool to produce the charts. Alternatively, +# the MSCGEN_TOOL tag can also specify the name an external tool. For instance, +# specifying prog as the value, Doxygen will call the tool as prog -T +# <outfile_format> -o <outputfile> <inputfile>. The external tool should support +# output file formats "png", "eps", "svg", and "ismap". + +MSCGEN_TOOL = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = diff --git a/Makefile b/Makefile index 24b7c96..3373db4 100644 --- a/Makefile +++ b/Makefile @@ -81,6 +81,9 @@
PREPROCESS_ONLY := -E -P -x assembler-with-cpp -undef -I .
+DOXYGEN := doxygen +DOXYGEN_OUTPUT_DIR := Documentation/doxygen + export $(COREBOOT_EXPORTS)
all: real-all @@ -501,6 +504,12 @@ sphinx-lint: $(MAKE) SPHINXOPTS=-W -C Documentation sphinx
+doxygen-xml: + $(DOXYGEN) Documentation/Doxyfile + +doxygen-clean: + rm -rf $(DOXYGEN_OUTPUT_DIR) + # Look at all of the files in the SYMLINK_LIST and create the symbolic links # into the coreboot tree. Each symlink.txt file in site-local should be in the # directory linked from and have a single line with the path to the location to