[coreboot-gerrit] Change in coreboot[master]: vboot: Clear secdata change flags after factory init

[Julius Werner (Code Review)]

Julius Werner has submitted this change. ( https://review.coreboot.org/c/coreboot/+/37471 )

Change subject: vboot: Clear secdata change flags after factory init
......................................................................

vboot: Clear secdata change flags after factory init

factory_initialize_tpm() calls secdata_xxx_create() (for both firmware
and kernel space) and then immediately writes those spaces out to the
TPM. The create() functions make vboot think it just changed the secdata
(because it reinitialized the byte arrays in the context), so we also
need to clear the VB2_CONTEXT_SECDATA_xxx_CHANGED flags again, otherwise
vboot thinks it still needs to flush the spaces out to the TPM even
though we already did that.

Also clean up some minor related stuff (VB2_CONTEXT_SECDATA_CHANGED
notation is deprecated, and secdata space intialization should use the
same write-and-readback function we use for updates).

Change-Id: I231fadcf7b35a1aec3b39254e7e41c3d456d4911
Signed-off-by: Julius Werner 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37471
Tested-by: build bot (Jenkins) 
Reviewed-by: Aaron Durbin 
---
M src/security/vboot/secdata_tpm.c
M src/security/vboot/vboot_logic.c
2 files changed, 9 insertions(+), 7 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Aaron Durbin: Looks good to me, approved

diff --git a/src/security/vboot/secdata_tpm.c b/src/security/vboot/secdata_tpm.c
index 0afd00d..ef24555 100644
--- a/src/security/vboot/secdata_tpm.c
+++ b/src/security/vboot/secdata_tpm.c
@@ -188,7 +188,7 @@
    if (rv != TPM_SUCCESS)
    	return rv;

-	return safe_write(index, data, length);
+	return write_secdata(index, data, length);
 }

static uint32_t set_firmware_space(const void *firmware_blob)
@@ -398,6 +398,11 @@
    if (result != TPM_SUCCESS)
    	return result;

+	/* _factory_initialize_tpm() writes initial secdata values to TPM
+	   immediately, so let vboot know that it's up to date now. */
+	ctx->flags &= ~(VB2_CONTEXT_SECDATA_FIRMWARE_CHANGED |
+			VB2_CONTEXT_SECDATA_KERNEL_CHANGED);
+
    VBDEBUG("TPM: factory initialization successful\n");

return TPM_SUCCESS;
@@ -410,14 +415,11 @@
    /* Read the firmware space. */
    rv = read_space_firmware(ctx);
    if (rv == TPM_E_BADINDEX) {
-		/*
-		 * This seems the first time we've run. Initialize the TPM.
-		 */
+		/* This seems the first time we've run. Initialize the TPM. */
    	VBDEBUG("TPM: Not initialized yet.\n");
    	RETURN_ON_FAILURE(factory_initialize_tpm(ctx));
    } else if (rv != TPM_SUCCESS) {
    	VBDEBUG("TPM: Firmware space in a bad state; giving up.\n");
-		//RETURN_ON_FAILURE(factory_initialize_tpm(ctx));
    	return TPM_E_CORRUPTED_STATE;
    }

diff --git a/src/security/vboot/vboot_logic.c b/src/security/vboot/vboot_logic.c
index ccce148..6c4f8fd 100644
--- a/src/security/vboot/vboot_logic.c
+++ b/src/security/vboot/vboot_logic.c
@@ -265,10 +265,10 @@

void vboot_save_data(struct vb2_context *ctx)
 {
-	if (ctx->flags & VB2_CONTEXT_SECDATA_CHANGED) {
+	if (ctx->flags & VB2_CONTEXT_SECDATA_FIRMWARE_CHANGED) {
    	printk(BIOS_INFO, "Saving secdata\n");
    	antirollback_write_space_firmware(ctx);
-		ctx->flags &= ~VB2_CONTEXT_SECDATA_CHANGED;
+		ctx->flags &= ~VB2_CONTEXT_SECDATA_FIRMWARE_CHANGED;
    }

vboot_save_nvdata_only(ctx);