Dennis Wassenberg (dennis.wassenberg@secunet.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7060
-gerrit
commit f5877f053505b250b47df41ea43f7a6bc6144d27 Author: Dennis Wassenberg dennis.wassenberg@secunet.com Date: Tue Oct 14 17:29:36 2014 +0200
siemens/sitemp_g1p1: Fix serial output for simo board
The simo board with console output at UART port 1 (COM2) will not produce any output if CONFIG_UART_FOR_CONSOLE=1 is set correctly. Commit f29200240e428761827ab8d179fa23068bfa9d59 (superio/ite/*: Factor out generic romstage component) will only and always activate UART port 0 unregarded to CONFIG_UART_FOR_CONSOLE value. Now the UART port which was selected by CONFIG_UART_FOR_CONSOLE will be enabled and used for console output
Change-Id: Ibbd2b5115b1ed4763962ba32fc9c19431a906c78 Signed-off-by: Dennis Wassenberg dennis.wassenberg@secunet.com --- src/mainboard/siemens/sitemp_g1p1/romstage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c index 3332999..4beb8c9 100644 --- a/src/mainboard/siemens/sitemp_g1p1/romstage.c +++ b/src/mainboard/siemens/sitemp_g1p1/romstage.c @@ -46,7 +46,7 @@ #include "southbridge/amd/sb600/early_setup.c" #include "northbridge/amd/amdk8/debug.c" /* After sb600_early_setup.c! */
-#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define SERIAL_DEV PNP_DEV(0x2e, CONFIG_UART_FOR_CONSOLE == 1 ? IT8712F_SP2 : IT8712F_SP1) #define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO)
/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/