Angel Pons has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/39740 )
Change subject: mb/gigabyte/ga-h61ma-d3v: Correct PCIe port setup ......................................................................
mb/gigabyte/ga-h61ma-d3v: Correct PCIe port setup
Coalescing is not needed, as all PCIe ports are used.
Change-Id: Icf31f6672e0a54d119a6537da1b52c42f9cee823 Signed-off-by: Angel Pons th3fanbus@gmail.com --- M src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61ma-d3v/devicetree.cb 1 file changed, 8 insertions(+), 7 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/40/39740/1
diff --git a/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61ma-d3v/devicetree.cb b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61ma-d3v/devicetree.cb index cbd0ee6..455e109 100644 --- a/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61ma-d3v/devicetree.cb +++ b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61ma-d3v/devicetree.cb @@ -34,7 +34,6 @@ chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH register "c2_latency" = "0x0065" register "gen1_dec" = "0x003c0a01" - register "pcie_port_coalesce" = "1" register "sata_interface_speed_support" = "0x3" register "sata_port_map" = "0x33" register "spi_lvscc" = "0x2005" @@ -43,12 +42,14 @@ device pci 16.1 off end # Management Engine Interface 2 device pci 1a.0 on end # USB2 EHCI #2 device pci 1b.0 on end # High Definition Audio Audio controller - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 on end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 - device pci 1c.3 on end # PCIe Port #4 - device pci 1c.4 on end # PCIe Port #5 - device pci 1c.5 on end # PCIe Port #6 + + device pci 1c.0 on end # RP #1: PCIe x1 Port (PCIEX1_3) + device pci 1c.1 on end # RP #2: PCIe x1 Port (PCIEX1_1) + device pci 1c.2 on end # RP #3: Etron EJ168 USB 3.0 + device pci 1c.3 on end # RP #4: Marvell 88SE9172 SATA + device pci 1c.4 on end # RP #5: Realtek RTL8111F GbE NIC + device pci 1c.5 on end # RP #6: PCIe x1 Port (PCIEX1_2) + device pci 1d.0 on end # USB2 EHCI #1 device pci 1e.0 off end # PCI bridge device pci 1f.0 on # LPC bridge