[coreboot-gerrit] Patch merged into coreboot/master: 498c32a siemens/sitemp_g1p1: Fix serial output for simo board

the following patch was just integrated into master:
commit 498c32a6e8d06e3989cb83def86952e9301b84ee
Author: Dennis Wassenberg 
Date:   Tue Oct 14 17:29:36 2014 +0200

siemens/sitemp_g1p1: Fix serial output for simo board

The simo board with console output at UART port 1 (COM2) will not produce
    any output if CONFIG_UART_FOR_CONSOLE=1 is set correctly.
    Commit f29200240e428761827ab8d179fa23068bfa9d59
    (superio/ite/*: Factor out generic romstage component)
    will only and always activate UART port 0 unregarded to
    CONFIG_UART_FOR_CONSOLE value.
    Now the UART port which was selected by CONFIG_UART_FOR_CONSOLE
    will be enabled and used for console output

Change-Id: Ibbd2b5115b1ed4763962ba32fc9c19431a906c78
    Signed-off-by: Dennis Wassenberg 
    Reviewed-on: http://review.coreboot.org/7060
    Tested-by: build bot (Jenkins)
    Reviewed-by: Nico Huber

See http://review.coreboot.org/7060 for details.

-gerrit