Edward O'Callaghan (eocallaghan@alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4801
-gerrit
commit a419ff66aacf6d6779fd44bfea43dcf8a8af9811 Author: Edward O'Callaghan eocallaghan@alterapraxis.com Date: Sat Jan 25 21:46:10 2014 +1100
Jetway NF81-T56N-LF [2/2]: actually implement mainboard support.
Step 2: change the Persimmon code to adapt it to the new board's hardware.
The NF81-T56N-LF is a IPC form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) APU - 2x SO-DIMM sockets for DDR3 800-1066 SDRAM (1.5 or 1.35V)? - VGA and LVDS (via Analogix ANX3110) - AMD A55E (Hudson-E1) southbridge - 6x USB 2.0/1.1 ports - 5x SATA3 6Gb/s, 1x mSATA socket - 6-Channel HD Audio (via VIA VT1705) - PCI and ISA (via ITE IT8888)?? - NEC uPD78F0532 microcontroller on I2C ("SEMA")?? - 2x RJ45 GbE (via Realtek RTL8111E x2) - Fintek F71869AD Super I/O - PS/2 KB/MS port - RS232 header (via Unisonic UTC 75232 RS232 driver/receiver) - GPIO header - CIR header - 1x MXIC MX25L1606E (SO8, soldered) 16 Mbit SPI flash (BIOS)
Note: MX25L1606E is 16Mbit, 8bits in a byte, so 2MB. Jetway *lies* claiming the SPI flash is 16MB. They also use red pen over the chip so you wont see this deceit.
Change-Id: I03ccc58bc782e800aeef0d19679ce060277b0c04 Signed-off-by: Edward O'Callaghan eocallaghan@alterapraxis.com --- src/mainboard/jetway/Kconfig | 3 ++ src/mainboard/jetway/nf81-t56n-lf/Kconfig | 18 ++++--- src/mainboard/jetway/nf81-t56n-lf/board_info.txt | 5 +- src/mainboard/jetway/nf81-t56n-lf/devicetree.cb | 62 ++++++++++++++++-------- src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h | 3 ++ src/mainboard/jetway/nf81-t56n-lf/romstage.c | 7 +-- 6 files changed, 65 insertions(+), 33 deletions(-)
diff --git a/src/mainboard/jetway/Kconfig b/src/mainboard/jetway/Kconfig index 7e6e29d..5b55daa 100644 --- a/src/mainboard/jetway/Kconfig +++ b/src/mainboard/jetway/Kconfig @@ -11,6 +11,8 @@ config BOARD_JETWAY_J7F4K1G5D bool "J7F4K1G5D" config BOARD_JETWAY_PA78VM5 bool "PA78VM5 (Fam10)" +config BOARD_JETWAY_NF81_T56N_LF + bool "NF81_T56N_LF"
endchoice
@@ -18,6 +20,7 @@ source "src/mainboard/jetway/j7f2/Kconfig" source "src/mainboard/jetway/j7f4k1g2e/Kconfig" source "src/mainboard/jetway/j7f4k1g5d/Kconfig" source "src/mainboard/jetway/pa78vm5/Kconfig" +source "src/mainboard/jetway/nf81-t56n-lf/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/jetway/nf81-t56n-lf/Kconfig b/src/mainboard/jetway/nf81-t56n-lf/Kconfig index febd8dd..d602ffa 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/Kconfig +++ b/src/mainboard/jetway/nf81-t56n-lf/Kconfig @@ -2,6 +2,7 @@ # This file is part of the coreboot project. # # Copyright (C) 2011 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -17,7 +18,7 @@ # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA #
-if BOARD_AMD_PERSIMMON +if BOARD_JETWAY_NF81_T56N_LF
config BOARD_SPECIFIC_OPTIONS # dummy def_bool y @@ -25,22 +26,23 @@ config BOARD_SPECIFIC_OPTIONS # dummy select CPU_AMD_AGESA_FAMILY14 select NORTHBRIDGE_AMD_AGESA_FAMILY14 select SOUTHBRIDGE_AMD_CIMX_SB800 - select SUPERIO_FINTEK_F81865F + select SUPERIO_FINTEK_F71869AD select HAVE_OPTION_TABLE select HAVE_PIRQ_TABLE select HAVE_MP_TABLE - select HAVE_ACPI_RESUME +# FIXME: Disable S3 for now. Enable by default once stabilised. +# select HAVE_ACPI_RESUME select SB_HT_CHAIN_UNITID_OFFSET_ONLY select LIFT_BSP_APIC_ID select SERIAL_CPU_INIT select AMDMCT select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 + select BOARD_ROMSIZE_KB_2048 select GFXUMA
config MAINBOARD_DIR string - default amd/persimmon + default jetway/nf81-t56n-lf
config APIC_ID_OFFSET hex @@ -48,7 +50,7 @@ config APIC_ID_OFFSET
config MAINBOARD_PART_NUMBER string - default "Persimmon" + default "NF81-T56N-LF"
config HW_MEM_HOLE_SIZEK hex @@ -101,7 +103,7 @@ config VGA_BIOS
config VGA_BIOS_ID string - default "1002,9802" + default "1002,9806" # FUSION_G_T56N
config SB800_AHCI_ROM bool @@ -111,4 +113,4 @@ config DRIVERS_PS2_KEYBOARD bool default n
-endif # BOARD_AMD_PERSIMMON +endif # BOARD_JETWAY_NF81_T56N_LF diff --git a/src/mainboard/jetway/nf81-t56n-lf/board_info.txt b/src/mainboard/jetway/nf81-t56n-lf/board_info.txt index 85cb19a..6748751 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/board_info.txt +++ b/src/mainboard/jetway/nf81-t56n-lf/board_info.txt @@ -1,5 +1,6 @@ -Board name: DBFT1-00-EVAL-KT (Persimmon) -Category: eval +Board URL: http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=822&proname=NF81... +Category: Mini-ITX +ROM package: SOIC8 ROM protocol: SPI ROM socketed: n Flashrom support: y diff --git a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb index 8b1acd5..3624744 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb +++ b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb @@ -2,6 +2,7 @@ # This file is part of the coreboot project. # # Copyright (C) 2011 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -29,7 +30,8 @@ chip northbridge/amd/agesa/family14/root_complex chip northbridge/amd/agesa/family14 # PCI side of HT root complex device pci 0.0 on end # Root Complex device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] - device pci 4.0 on end # PCIE P2P bridge on-board NIC +# device pci 1.1 on end # Internal Audio P2P bridge 0x1314 + device pci 4.0 off end # PCIE P2P bridge on-board NIC device pci 5.0 off end # PCIE P2P bridge device pci 6.0 on end # PCIE P2P bridge PCIe slot device pci 7.0 off end # PCIE P2P bridge @@ -50,43 +52,58 @@ chip northbridge/amd/agesa/family14/root_complex device i2c 51 on end end end # SM - device pci 14.1 on end # IDE 0x439c + device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d - chip superio/fintek/f81865f - device pnp 4e.0 off # Floppy + chip superio/fintek/f71869ad +# XXX: 4e is the default index port and .xy is the +# LDN indexing the pnp_info array found in the superio.c + device pnp 4e.00 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 end - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 off end # Hardware Monitor - device pnp 4e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.6 off end # GPIO - device pnp 4e.a off end # PME - device pnp 4e.10 on # COM1 + device pnp 4e.01 on # COM1 io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 4e.11 on # COM2 + device pnp 4e.02 on # COM2 io 0x60 = 0x2f8 irq 0x70 = 3 end - end # f81865f + device pnp 4e.03 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 4e.04 on # Hardware Monitor + io 0x60 = 0x295 + irq 0x70 = 0 + end + device pnp 4e.05 on # KBC + io 0x60 = 0x060 + irq 0x70 = 1 # Keyboard IRQ + irq 0x70 = 12 # Mouse IRQ + end + device pnp 4e.06 off end # GPIO +# TODO: Verify BSEL register content with vendor BIOS using +# $ sudo isadump 0x4e 0x4f 0x7 +# which select logical device (LDN) 7. Then read that we have in 0x27, bit1 + device pnp 4e.07 on # BSEL + io 0x60 = 0x000 + end + device pnp 4e.0a on end # PME + end # f71869ad end #LPC device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 off end # OHCI FS/LS USB + device pci 14.5 on end # OHCI FS/LS USB (0x4399) device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 off end # PCIe PortA + device pci 15.0 on end # PCIe PortA (0x43a0) GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168) device pci 15.1 off end # PCIe PortB device pci 15.2 off end # PCIe PortC device pci 15.3 off end # PCIe PortD - device pci 16.0 off end # OHCI USB 10-13 - device pci 16.2 off end # EHCI USB 10-13 + device pci 16.0 on end # OHCI USB 10-13 (0x4397) + device pci 16.2 on end # EHCI USB 10-13 (0x4396) register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
@@ -150,6 +167,11 @@ chip northbridge/amd/agesa/family14/root_complex device pci 18.6 on end device pci 18.7 on end
+# +# TODO: Verify the proper SocketId/MemChannelId/DimmId addresses of the SPD +# with i2cdump tool. +# Notes: 0xa0=0x50*2, 0xa2=0x51*2.. 0x50-0x54 are usually RAM modules on the SMBus. +# register "spdAddrLookup" = " { { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses diff --git a/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h b/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h index f084b2f..ce08bee 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h +++ b/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -211,6 +212,7 @@ */ #define GEC_CONFIG 0
+/* FIXME: Verify this for sound to work! */ static const CODECENTRY persimmon_codec_alc269[] = { /* NID, PinConfig */ @@ -228,6 +230,7 @@ static const CODECENTRY persimmon_codec_alc269[] = {0xff, 0xffffffff} /* end of table */ };
+/* FIXME: Verify this for sound to work! */ static const CODECTBLLIST codec_tablelist[] = { {0x010ec0269, (CODECENTRY*)&persimmon_codec_alc269[0]}, diff --git a/src/mainboard/jetway/nf81-t56n-lf/romstage.c b/src/mainboard/jetway/nf81-t56n-lf/romstage.c index 98c64ed..f8271f7 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/romstage.c +++ b/src/mainboard/jetway/nf81-t56n-lf/romstage.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -31,7 +32,7 @@ #include <cpu/x86/mtrr.h> #include "agesawrapper.h" #include "cpu/x86/bist.h" -#include "superio/fintek/f81865f/f81865f_early_serial.c" +#include "superio/fintek/f71869ad/f71869ad.h" #include "cpu/x86/lapic.h" #include "drivers/pc80/i8254.c" #include "drivers/pc80/i8259.c" @@ -45,7 +46,7 @@ void disable_cache_as_ram(void); /* cache_as_ram.inc */ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx);
-#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1) +#define SERIAL_DEV PNP_DEV(0x4e, F71869AD_SP1)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { @@ -70,7 +71,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) sb_Poweron_Init();
post_code(0x31); - f81865f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + f71869ad_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); }