[coreboot-gerrit] Change in coreboot[master]: mb/google/octopus/var/phaser: add audio codec into SSFC support for P...

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/52878 )

Change subject: mb/google/octopus/var/phaser: add audio codec into SSFC support for Phaser
......................................................................

mb/google/octopus/var/phaser: add audio codec into SSFC support for Phaser

Add audio codec module RT5682 in project and define GPIO_137 in the
override_table for SSFC framework to adjust IRQ configuration.

BUG=b:182221327
BRANCH=octopus
TEST=adjust SSFC value of CBI to select RT5682I or DA7219 then check whether device tree is updated correspondingly by disabling unselected one.

Signed-off-by: Kevin Chang 
Change-Id: I202f71f57ad2db84fb90b52f9ffd7a1fd05494a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52878
Tested-by: build bot (Jenkins) 
Reviewed-by: Marco Chen 
---
M src/mainboard/google/octopus/Kconfig.name
M src/mainboard/google/octopus/variants/phaser/gpio.c
M src/mainboard/google/octopus/variants/phaser/overridetree.cb
3 files changed, 18 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Marco Chen: Looks good to me, approved

diff --git a/src/mainboard/google/octopus/Kconfig.name b/src/mainboard/google/octopus/Kconfig.name
index 942726e..b822d65 100644
--- a/src/mainboard/google/octopus/Kconfig.name
+++ b/src/mainboard/google/octopus/Kconfig.name
@@ -16,6 +16,7 @@
    select BASEBOARD_OCTOPUS_LAPTOP
    select BOARD_GOOGLE_BASEBOARD_OCTOPUS
    select NHLT_DA7219 if INCLUDE_NHLT_BLOBS
+	select NHLT_RT5682 if INCLUDE_NHLT_BLOBS

config BOARD_GOOGLE_LICK
    bool "->  Lick"
diff --git a/src/mainboard/google/octopus/variants/phaser/gpio.c b/src/mainboard/google/octopus/variants/phaser/gpio.c
index 29b64b5..f227b01 100644
--- a/src/mainboard/google/octopus/variants/phaser/gpio.c
+++ b/src/mainboard/google/octopus/variants/phaser/gpio.c
@@ -14,6 +14,8 @@
    PAD_NC(GPIO_53, UP_20K),
    PAD_NC(GPIO_67, UP_20K),
    PAD_NC(GPIO_117, UP_20K),
+	PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, LEVEL, INVERT, HIZCRx1,
+					DISPUPD),
    PAD_NC(GPIO_143, UP_20K),

/* EN_PP3300_TOUCHSCREEN */
@@ -35,6 +37,8 @@
    PAD_NC(GPIO_53, UP_20K),
    PAD_NC(GPIO_67, UP_20K),
    PAD_NC(GPIO_117, UP_20K),
+	PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, LEVEL, INVERT, HIZCRx1,
+					DISPUPD),
    PAD_NC(GPIO_143, UP_20K),

/* EN_PP3300_TOUCHSCREEN */
diff --git a/src/mainboard/google/octopus/variants/phaser/overridetree.cb b/src/mainboard/google/octopus/variants/phaser/overridetree.cb
index fb2936a..45c017a 100644
--- a/src/mainboard/google/octopus/variants/phaser/overridetree.cb
+++ b/src/mainboard/google/octopus/variants/phaser/overridetree.cb
@@ -113,6 +113,19 @@
    			register "mic_amp_in_sel" = ""diff""
    			device i2c 1a on end
    		end
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Realtek RT5682""
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)"
+				register "probed" = "1"
+				register "property_count" = "1"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
    	end	# - I2C 5
    	device pci 17.2 on
    		chip drivers/i2c/generic