Michał Żygowski has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/62073 )
Change subject: mb/asus/kgpe-d16/devicetree.cb: Remove unexisting entries ......................................................................
mb/asus/kgpe-d16/devicetree.cb: Remove unexisting entries
Signed-off-by: Michał Żygowski michal.zygowski@3mdeb.com Change-Id: Icab15dfc7a4f377ff1b6f618bc5b01d8cd1e883a --- M src/mainboard/asus/kgpe-d16/devicetree.cb 1 file changed, 2 insertions(+), 119 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/73/62073/1
diff --git a/src/mainboard/asus/kgpe-d16/devicetree.cb b/src/mainboard/asus/kgpe-d16/devicetree.cb index 31bd3e3..e3994d9 100644 --- a/src/mainboard/asus/kgpe-d16/devicetree.cb +++ b/src/mainboard/asus/kgpe-d16/devicetree.cb @@ -1,6 +1,6 @@ chip northbridge/amd/amdfam10/root_complex # Root complex device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket + chip cpu/amd/socket_G34 # CPU socket device lapic 0 on end # Local APIC of the CPU end end @@ -56,124 +56,7 @@ device pci 13.0 on end # USB device pci 13.1 on end # USB device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic # DIMM n-0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM n-0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM n-0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM n-0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM n-1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM n-1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM n-1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM n-1-1-1 - device i2c 57 on end - end - chip drivers/i2c/w83795 - register "fanin_ctl1" = "0xff" # Enable monitoring of FANIN1 - FANIN8 - register "fanin_ctl2" = "0x00" # Connect FANIN11 - FANIN14 to alternate functions - register "temp_ctl1" = "0x2a" # Enable monitoring of DTS, VSEN12, and VSEN13 - register "temp_ctl2" = "0x01" # Enable monitoring of TD1/TR1 - register "temp_dtse" = "0x03" # Enable DTS1 and DTS2 - register "volt_ctl1" = "0xff" # Enable monitoring of VSEN1 - VSEN8 - register "volt_ctl2" = "0xf7" # Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT - register "temp1_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp1) - register "temp2_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp2) - register "temp3_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp3) - register "temp4_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp4) - register "temp5_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp5) - register "temp6_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp6) - register "temp1_source_select" = "0x00" # Use TD1/TR1 as data source for Temp1 - register "temp2_source_select" = "0x00" # Use TD2/TR2 as data source for Temp2 - register "temp3_source_select" = "0x00" # Use TD3/TR3 as data source for Temp3 - register "temp4_source_select" = "0x00" # Use TD4/TR4 as data source for Temp4 - register "temp5_source_select" = "0x00" # Use TR5 as data source for Temp5 - register "temp6_source_select" = "0x00" # Use TR6 as data source for Temp6 - register "tr1_critical_temperature" = "85" # Set TD1/TR1 critical temperature to 85°C - register "tr1_critical_hysteresis" = "80" # Set TD1/TR1 critical hysteresis temperature to 80°C - register "tr1_warning_temperature" = "70" # Set TD1/TR1 warning temperature to 70°C - register "tr1_warning_hysteresis" = "65" # Set TD1/TR1 warning hysteresis temperature to 65°C - register "dts_critical_temperature" = "85" # Set DTS (CPU) critical temperature to 85°C - register "dts_critical_hysteresis" = "80" # Set DTS (CPU) critical hysteresis temperature to 80°C - register "dts_warning_temperature" = "70" # Set DTS (CPU) warning temperature to 70°C - register "dts_warning_hysteresis" = "65" # Set DTS (CPU) warning hysteresis temperature to 65°C - register "temp1_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp2_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp3_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp4_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp5_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp6_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp1_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp2_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp3_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp4_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp5_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp6_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "fan1_nonstop" = "7" # Set Fan 1 minimum speed - register "fan2_nonstop" = "7" # Set Fan 2 minimum speed - register "fan3_nonstop" = "7" # Set Fan 3 minimum speed - register "fan4_nonstop" = "7" # Set Fan 4 minimum speed - register "fan5_nonstop" = "7" # Set Fan 5 minimum speed - register "fan6_nonstop" = "7" # Set Fan 6 minimum speed - register "fan7_nonstop" = "7" # Set Fan 7 minimum speed - register "fan8_nonstop" = "7" # Set Fan 8 minimum speed - register "default_speed" = "100" # All fans to full speed on power up - register "fan1_duty" = "100" # Fan 1 to full speed - register "fan2_duty" = "100" # Fan 2 to full speed - register "fan3_duty" = "100" # Fan 3 to full speed - register "fan4_duty" = "100" # Fan 4 to full speed - register "fan5_duty" = "100" # Fan 5 to full speed - register "fan6_duty" = "100" # Fan 6 to full speed - register "fan7_duty" = "100" # Fan 7 to full speed - register "fan8_duty" = "100" # Fan 8 to full speed - register "vcore1_high_limit_mv" = "1500" # VCORE1 (Node 0) high limit to 1.5V - register "vcore1_low_limit_mv" = "900" # VCORE1 (Node 0) low limit to 0.9V - register "vcore2_high_limit_mv" = "1500" # VCORE2 (Node 1) high limit to 1.5V - register "vcore2_low_limit_mv" = "900" # VCORE2 (Node 1) low limit to 0.9V - register "vsen3_high_limit_mv" = "1600" # VSEN1 (Node 0 RAM voltage) high limit to 1.6V - register "vsen3_low_limit_mv" = "1100" # VSEN1 (Node 0 RAM voltage) low limit to 1.1V - register "vsen4_high_limit_mv" = "1600" # VSEN2 (Node 1 RAM voltage) high limit to 1.6V - register "vsen4_low_limit_mv" = "1100" # VSEN2 (Node 1 RAM voltage) low limit to 1.1V - register "vsen5_high_limit_mv" = "1250" # VSEN5 (Node 0 HT link voltage) high limit to 1.25V - register "vsen5_low_limit_mv" = "1150" # VSEN5 (Node 0 HT link voltage) low limit to 1.15V - register "vsen6_high_limit_mv" = "1250" # VSEN6 (Node 1 HT link voltage) high limit to 1.25V - register "vsen6_low_limit_mv" = "1150" # VSEN6 (Node 1 HT link voltage) low limit to 1.15V - register "vsen7_high_limit_mv" = "1250" # VSEN7 (Northbridge core voltage) high limit to 1.25V - register "vsen7_low_limit_mv" = "1050" # VSEN7 (Northbridge core voltage) low limit to 1.05V - register "vsen8_high_limit_mv" = "1900" # VSEN8 (+1.8V) high limit to 1.9V - register "vsen8_low_limit_mv" = "1700" # VSEN8 (+1.8V) low limit to 1.7V - register "vsen9_high_limit_mv" = "1250" # VSEN9 (+1.2V) high limit to 1.25V - register "vsen9_low_limit_mv" = "1150" # VSEN9 (+1.2V) low limit to 1.15V - register "vsen10_high_limit_mv" = "1150" # VSEN10 (+1.1V) high limit to 1.15V - register "vsen10_low_limit_mv" = "1050" # VSEN10 (+1.1V) low limit to 1.05V - register "vsen11_high_limit_mv" = "1625" # VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V - register "vsen11_low_limit_mv" = "1500" # VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V - register "vsen12_high_limit_mv" = "1083" # VSEN12 (+12V, scaling factor ~12) high limit to 13V - register "vsen12_low_limit_mv" = "917" # VSEN12 (+12V, scaling factor ~12) low limit to 11V - register "vsen13_high_limit_mv" = "1625" # VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V - register "vsen13_low_limit_mv" = "1500" # VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V - register "vdd_high_limit_mv" = "3500" # 3VDD high limit to 3.5V - register "vdd_low_limit_mv" = "3100" # 3VDD low limit to 3.1V - register "vsb_high_limit_mv" = "3500" # 3VSB high limit to 3.5V - register "vsb_low_limit_mv" = "3100" # 3VSB low limit to 3.1V - register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V - register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V - register "smbus_aux" = "1" # Device located on auxiliary SMBUS controller - device i2c 0x2f on end - end - end + device pci 14.0 on end # SM device pci 14.1 on end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 (ASUS MIO add-on card) device pci 14.3 on # LPC 0x439d (SMBUS primary controller)