[coreboot-gerrit] Patch set updated for coreboot: payloads/external/Makefile.inc: Clean up targets

[Martin Roth]

Martin Roth ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17047

-gerrit

commit c08a6a40787a4a8bfe0d26dd2501f821d9181206
Author: Martin Roth 
Date:   Mon Oct 17 10:21:17 2016 -0600

payloads/external/Makefile.inc: Clean up targets

- Combine the short target name with the filename.
    - All targets depend on top level dotconfig.
    - Payload targets depend on their payload .config.
    - Add .PHONY target for the short target names.
    - Add additional short target names grub, uboot, and memtest.
    - Remove reversed dependencies of config files on the output.
    - Set SeaBIOS vgabios target at same level as main SeaBIOS target to
    prevent rebuilds because of the vbios being included.

This fixes an issue with SeaBIOS and Filo rebuilding every time.

Change-Id: Ied3b4ea7edfd3b4183ff788f57f484c462b63b5b
    Signed-off-by: Martin Roth 
---
 payloads/external/Makefile.inc | 39 ++++++++++++++++++---------------------
 1 file changed, 18 insertions(+), 21 deletions(-)

diff --git a/payloads/external/Makefile.inc b/payloads/external/Makefile.inc
index e4d3e12..90233ae 100644
--- a/payloads/external/Makefile.inc
+++ b/payloads/external/Makefile.inc
@@ -16,14 +16,20 @@
 ##

######################################################################
+
+SEABIOS_DIR=payloads/external/SeaBIOS/seabios
+SEABIOS_OUT=$(SEABIOS_DIR)/out
+FILO_DIR=payloads/external/FILO/filo
+FILO_OUT=$(FILO_DIR)/build
+
 # set up payload config and version files for later inclusion
 ifeq ($(CONFIG_PAYLOAD_SEABIOS),y)
-PAYLOAD_CONFIG=payloads/external/SeaBIOS/seabios/.config
-PAYLOAD_VERSION=payloads/external/SeaBIOS/seabios/out/autoversion.h
+PAYLOAD_CONFIG=$(SEABIOS_DIR)/.config
+PAYLOAD_VERSION=$(SEABIOS_OUT)/autoversion.h
 endif
 ifeq ($(CONFIG_PAYLOAD_FILO),y)
-PAYLOAD_CONFIG=payloads/external/FILO/filo/.config
-PAYLOAD_VERSION=payloads/external/FILO/filo/build/version.h
+PAYLOAD_CONFIG=$(FILO_DIR)/.config
+PAYLOAD_VERSION=$(FILO_OUT)/version.h
 endif
 ifeq ($(CONFIG_PAYLOAD_DEPTHCHARGE),y)
 PAYLOAD_CONFIG=payloads/external/depthcharge/depthcharge/.config
@@ -60,10 +66,12 @@ cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += payload_revision
 payload_revision-file := $(PAYLOAD_VERSION)
 payload_revision-type := raw

+.PHONY: seabios depthcharge grub2 grub tint memtest u-boot uboot ipxe
+
 # SeaBIOS

SEABIOS_CC_OFFSET=$(if $(filter %ccache,$(HOSTCC)),2,1)
-payloads/external/SeaBIOS/seabios/out/bios.bin.elf seabios: $(DOTCONFIG)
+$(SEABIOS_OUT)/vgabios.bin $(SEABIOS_OUT)/bios.bin.elf seabios: $(DOTCONFIG) $(PAYLOAD_CONFIG)
    $(MAKE) -C payloads/external/SeaBIOS \
    		HOSTCC="$(HOSTCC)" \
    		CC=$(word $(SEABIOS_CC_OFFSET),$(CC_x86_32)) \
@@ -83,10 +91,6 @@ payloads/external/SeaBIOS/seabios/out/bios.bin.elf seabios: $(DOTCONFIG)
    		CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \
    		CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE)

-payloads/external/SeaBIOS/seabios/out/vgabios.bin: seabios
-payloads/external/SeaBIOS/seabios/.config: payloads/external/SeaBIOS/seabios/out/bios.bin.elf
-payloads/external/SeaBIOS/seabios/out/autoversion.h: payloads/external/SeaBIOS/seabios/out/bios.bin.elf
-
 # add a SeaBIOS bootorder file
 ifneq ($(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)),)
 cbfs-files-y += bootorder
@@ -96,15 +100,14 @@ endif

# Depthcharge

-payloads/external/depthcharge/depthcharge/build/depthcharge.elf depthcharge: $(DOTCONFIG) $(CBFSTOOL)
-
+payloads/external/depthcharge/depthcharge/build/depthcharge.elf depthcharge: $(DOTCONFIG) $(CBFSTOOL) $(PAYLOAD_CONFIG)
    $(MAKE) -C payloads/external/depthcharge \
    	BOARD=$(call ws_to_under,$(call strip_quotes,$(call tolower,$(CONFIG_MAINBOARD_PART_NUMBER)))) \
    	MFLAGS= MAKEFLAGS=

# FILO

-filo:
+$(FILO_OUT)/filo.elf filo: $(DOTCONFIG) $(PAYLOAD_CONFIG)
    $(MAKE) -C payloads/external/FILO \
    		HOSTCC="$(HOSTCC)" \
    		CC="$(CC_x86_32)" LD="$(LD_x86_32)" OBJDUMP="$(OBJDUMP_x86_32)" \
@@ -112,13 +115,9 @@ filo:
    		CONFIG_FILO_MASTER=$(CONFIG_FILO_MASTER) \
    		CONFIG_FILO_STABLE=$(CONFIG_FILO_STABLE)

-payloads/external/FILO/filo/build/filo.elf: filo
-payloads/external/FILO/filo/.config: filo
-payloads/external/FILO/filo/build/version.h: filo
-
 # Grub

-grub2:
+payloads/external/GRUB2/grub2/build/default_payload.elf grub2 grub: $(DOTCONFIG)
    $(MAKE) -C payloads/external/GRUB2 \
    		HOSTCC="$(HOSTCC)" \
    		CC="$(CC_x86_32)" LD="$(LD_x86_32)" OBJDUMP="$(OBJDUMP_x86_32)" \
@@ -126,11 +125,9 @@ grub2:
    		CONFIG_GRUB2_MASTER=$(CONFIG_GRUB2_MASTER) \
    		CONFIG_GRUB2_EXTRA_MODULES=$(CONFIG_GRUB2_EXTRA_MODULES)

-payloads/external/GRUB2/grub2/build/default_payload.elf: grub2
-
 # U-Boot

-payloads/external/U-Boot/u-boot/u-boot-dtb.bin u-boot: $(DOTCONFIG)
+payloads/external/U-Boot/u-boot/u-boot-dtb.bin u-boot uboot: $(DOTCONFIG)
    $(MAKE) -C payloads/external/U-Boot \
    		CONFIG_UBOOT_MASTER=$(CONFIG_UBOOT_MASTER) \
    		CONFIG_UBOOT_STABLE=$(CONFIG_UBOOT_STABLE)
@@ -156,7 +153,7 @@ ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy)
    	SERIAL_BAUD_RATE=$(CONFIG_TTYS0_BAUD)
 endif

-payloads/external/Memtest86Plus/memtest86plus/memtest: $(DOTCONFIG)
+payloads/external/Memtest86Plus/memtest86plus/memtest memtest: $(DOTCONFIG)
    $(MAKE) -C payloads/external/Memtest86Plus all \
    	CC="$(CC_x86_32)" \
    	LD="$(LD_x86_32)" \