[coreboot-gerrit] Change in coreboot[master]: drivers/pc80/rtc: Always load cmos.default if measured boot is enabled

[9elements QA (Code Review)]

9elements QA has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/39906 )

Change subject: drivers/pc80/rtc: Always load cmos.default if measured boot is enabled
......................................................................

Patch Set 8:

Automatic boot test returned (PASS/FAIL/TOTAL): 3/0/3
Emulation targets:
EMULATION_QEMU_X86_Q35 using payload TianoCore : SUCCESS : https://lava.9esec.io/r/1972
EMULATION_QEMU_X86_Q35 using payload SeaBIOS : SUCCESS : https://lava.9esec.io/r/1971
EMULATION_QEMU_X86_I440FX using payload SeaBIOS : SUCCESS : https://lava.9esec.io/r/1970

Please note: This test is under development and might not be accurate at all!