Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6333
-gerrit
commit 13b4551af97dcec1634001e8058507bc6a9a9200 Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Mon Jul 21 19:35:16 2014 +0300
AGESA: Drop offset on PCI device enumeration
Integrated PCI devices in southbridge silicon have static BDFs, no need to have variables to store the parent bus or an offset with constant zero.
Change-Id: I37d3794d36b5e5775da9215574ddc199696646d0 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/mainboard/amd/dinar/get_bus_conf.c | 24 +------------------ src/mainboard/amd/dinar/irq_tables.c | 8 +++---- src/mainboard/amd/dinar/mptable.c | 5 +--- src/mainboard/amd/inagua/get_bus_conf.c | 18 ++------------ src/mainboard/amd/inagua/irq_tables.c | 8 +++---- src/mainboard/amd/olivehill/get_bus_conf.c | 18 ++------------ src/mainboard/amd/olivehill/irq_tables.c | 8 +++---- src/mainboard/amd/parmer/get_bus_conf.c | 17 ++----------- src/mainboard/amd/parmer/irq_tables.c | 8 +++---- src/mainboard/amd/persimmon/get_bus_conf.c | 17 ++----------- src/mainboard/amd/persimmon/irq_tables.c | 8 +++---- src/mainboard/amd/south_station/get_bus_conf.c | 17 ++----------- src/mainboard/amd/south_station/irq_tables.c | 8 +++---- src/mainboard/amd/thatcher/get_bus_conf.c | 17 ++----------- src/mainboard/amd/thatcher/irq_tables.c | 8 +++---- src/mainboard/amd/torpedo/get_bus_conf.c | 28 +++------------------- src/mainboard/amd/torpedo/irq_tables.c | 8 +++---- src/mainboard/amd/union_station/get_bus_conf.c | 17 ++----------- src/mainboard/amd/union_station/irq_tables.c | 8 +++---- src/mainboard/asrock/e350m1/get_bus_conf.c | 17 ++----------- src/mainboard/asrock/e350m1/irq_tables.c | 8 +++---- src/mainboard/asrock/imb-a180/get_bus_conf.c | 16 ++----------- src/mainboard/asrock/imb-a180/irq_tables.c | 8 +++---- src/mainboard/asus/f2a85-m/get_bus_conf.c | 15 ++---------- src/mainboard/asus/f2a85-m/irq_tables.c | 8 +++---- src/mainboard/gizmosphere/gizmo/get_bus_conf.c | 18 ++------------ src/mainboard/gizmosphere/gizmo/irq_tables.c | 8 +++---- src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c | 17 ++----------- src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c | 8 +++---- src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c | 18 ++------------ src/mainboard/jetway/nf81-t56n-lf/irq_tables.c | 8 +++---- .../lippert/frontrunner-af/get_bus_conf.c | 18 ++------------ src/mainboard/lippert/frontrunner-af/irq_tables.c | 8 +++---- src/mainboard/lippert/toucan-af/get_bus_conf.c | 17 ++----------- src/mainboard/lippert/toucan-af/irq_tables.c | 8 +++---- src/mainboard/supermicro/h8qgi/get_bus_conf.c | 4 +--- src/mainboard/supermicro/h8qgi/irq_tables.c | 8 +++---- src/mainboard/supermicro/h8qgi/mptable.c | 3 +-- src/mainboard/supermicro/h8scm/get_bus_conf.c | 4 +--- src/mainboard/supermicro/h8scm/irq_tables.c | 8 +++---- src/mainboard/supermicro/h8scm/mptable.c | 3 +-- src/mainboard/tyan/s8226/get_bus_conf.c | 4 +--- src/mainboard/tyan/s8226/irq_tables.c | 8 +++---- src/mainboard/tyan/s8226/mptable.c | 4 +--- 44 files changed, 101 insertions(+), 395 deletions(-)
diff --git a/src/mainboard/amd/dinar/get_bus_conf.c b/src/mainboard/amd/dinar/get_bus_conf.c index 3104b73..5ab2ddd 100644 --- a/src/mainboard/amd/dinar/get_bus_conf.c +++ b/src/mainboard/amd/dinar/get_bus_conf.c @@ -32,25 +32,6 @@ */ u8 bus_sb700[2];
-/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* - * HT Chain device num, actually it is unit id base of every ht device in chain, - * assume every chain only have 4 ht device at most - */ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_sb700; - void get_bus_conf(void) { device_t dev; @@ -58,17 +39,14 @@ void get_bus_conf(void)
printk(BIOS_DEBUG, "Mainboard - Get_bus_conf.c - get_bus_conf - Start.\n");
- sbdn_sb700 = 0;
for (i = 0; i < ARRAY_SIZE(bus_sb700); i++) { bus_sb700[i] = 0; }
- bus_sb700[0] = (pci1234x[0] >> 16) & 0xff; - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
diff --git a/src/mainboard/amd/dinar/irq_tables.c b/src/mainboard/amd/dinar/irq_tables.c index 865d264..8242b4e 100644 --- a/src/mainboard/amd/dinar/irq_tables.c +++ b/src/mainboard/amd/dinar/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -70,8 +68,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -87,7 +85,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/dinar/mptable.c b/src/mainboard/amd/dinar/mptable.c index 398ee86..d239a7e 100644 --- a/src/mainboard/amd/dinar/mptable.c +++ b/src/mainboard/amd/dinar/mptable.c @@ -29,8 +29,6 @@ #include <cpu/amd/amdfam15.h>
extern u8 bus_sb700[2]; -extern u32 sbdn_sb700; -
static void *smp_write_config_table(void *v) { @@ -60,8 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sb700 = CONFIG_MAX_CPUS + 1; apicid_rd890 = apicid_sb700 + 1;
- //bus_sb700[0], TODO: why bus_sb700[0] use same value of bus_rd890[0] assigned by get_pci1234(), instead of 0. - dev = dev_find_slot(0, PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set sb700 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; diff --git a/src/mainboard/amd/inagua/get_bus_conf.c b/src/mainboard/amd/inagua/get_bus_conf.c index c688791..c39decf 100644 --- a/src/mainboard/amd/inagua/get_bus_conf.c +++ b/src/mainboard/amd/inagua/get_bus_conf.c @@ -33,17 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800;
-/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; - void get_bus_conf(void) { u32 apicid_base; @@ -52,23 +41,20 @@ void get_bus_conf(void) int i;
- sbdn_sb800 = 0;
memset(bus_sb800, 0, sizeof(bus_sb800));
- // bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
/* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/inagua/irq_tables.c b/src/mainboard/amd/inagua/irq_tables.c index 98d68d3..305988b 100644 --- a/src/mainboard/amd/inagua/irq_tables.c +++ b/src/mainboard/amd/inagua/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/olivehill/get_bus_conf.c b/src/mainboard/amd/olivehill/get_bus_conf.c index 508a73c..1dda593 100644 --- a/src/mainboard/amd/olivehill/get_bus_conf.c +++ b/src/mainboard/amd/olivehill/get_bus_conf.c @@ -35,17 +35,6 @@ u8 bus_yangtze[6]; u32 apicid_yangtze;
-/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_yangtze; -
void get_bus_conf(void) { @@ -66,23 +55,20 @@ void get_bus_conf(void) value &= ~(1 << 11); pci_write_config32(dev, 0x60, value);
- sbdn_yangtze = 0;
memset(bus_yangtze, 0, sizeof(bus_yangtze));
- // bus_yangtze[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_yangtze[0] = (pci1234x[0] >> 16) & 0xff;
/* yangtze */ - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_yangtze[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_yangtze[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/olivehill/irq_tables.c b/src/mainboard/amd/olivehill/irq_tables.c index 8dbea45..22ed1ab 100644 --- a/src/mainboard/amd/olivehill/irq_tables.c +++ b/src/mainboard/amd/olivehill/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; }
-extern u8 bus_yangtze[6]; -extern unsigned long sbdn_yangtze;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_yangtze[0]; - pirq->rtr_devfn = ((sbdn_yangtze + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0;
/* pci bridge */ - write_pirq_info(pirq_info, bus_yangtze[0], ((sbdn_yangtze + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/parmer/get_bus_conf.c b/src/mainboard/amd/parmer/get_bus_conf.c index 490e3c2..8dcd4e5 100644 --- a/src/mainboard/amd/parmer/get_bus_conf.c +++ b/src/mainboard/amd/parmer/get_bus_conf.c @@ -35,17 +35,6 @@ u8 bus_hudson[6]; u32 apicid_hudson;
-/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_hudson; -
void get_bus_conf(void) { @@ -56,23 +45,21 @@ void get_bus_conf(void)
- sbdn_hudson = 0;
memset(bus_hudson, 0, sizeof(bus_hudson));
- bus_hudson[0] = (pci1234x[0] >> 16) & 0xff;
/* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/parmer/irq_tables.c b/src/mainboard/amd/parmer/irq_tables.c index 19f8007..013941c 100644 --- a/src/mainboard/amd/parmer/irq_tables.c +++ b/src/mainboard/amd/parmer/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; }
-extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0;
/* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/persimmon/get_bus_conf.c b/src/mainboard/amd/persimmon/get_bus_conf.c index 412744c..9434429 100644 --- a/src/mainboard/amd/persimmon/get_bus_conf.c +++ b/src/mainboard/amd/persimmon/get_bus_conf.c @@ -35,16 +35,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; u32 apicver_sb800;
-/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800;
void get_bus_conf(void) { @@ -54,22 +44,19 @@ void get_bus_conf(void) int i;
- sbdn_sb800 = 0;
memset(bus_sb800, 0, sizeof(bus_sb800));
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
/* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/persimmon/irq_tables.c b/src/mainboard/amd/persimmon/irq_tables.c index 840e7b1..12a64a8 100644 --- a/src/mainboard/amd/persimmon/irq_tables.c +++ b/src/mainboard/amd/persimmon/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/south_station/get_bus_conf.c b/src/mainboard/amd/south_station/get_bus_conf.c index f221a45..53c7953 100644 --- a/src/mainboard/amd/south_station/get_bus_conf.c +++ b/src/mainboard/amd/south_station/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800;
-/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800;
void get_bus_conf(void) { @@ -52,16 +42,13 @@ void get_bus_conf(void) int i;
- sbdn_sb800 = 0;
memset(bus_sb800, 0, sizeof(bus_sb800));
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
/* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
@@ -70,7 +57,7 @@ void get_bus_conf(void) }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/south_station/irq_tables.c b/src/mainboard/amd/south_station/irq_tables.c index 840e7b1..12a64a8 100644 --- a/src/mainboard/amd/south_station/irq_tables.c +++ b/src/mainboard/amd/south_station/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/thatcher/get_bus_conf.c b/src/mainboard/amd/thatcher/get_bus_conf.c index b7d6d23..c2dbacd 100644 --- a/src/mainboard/amd/thatcher/get_bus_conf.c +++ b/src/mainboard/amd/thatcher/get_bus_conf.c @@ -35,17 +35,6 @@ u8 bus_hudson[6]; u32 apicid_hudson;
-/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_hudson; -
void get_bus_conf(void) { @@ -54,22 +43,20 @@ void get_bus_conf(void) device_t dev; int i;
- sbdn_hudson = 0;
memset(bus_hudson, 0, sizeof(bus_hudson));
- bus_hudson[0] = (pci1234x[0] >> 16) & 0xff;
/* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/thatcher/irq_tables.c b/src/mainboard/amd/thatcher/irq_tables.c index 19f8007..013941c 100644 --- a/src/mainboard/amd/thatcher/irq_tables.c +++ b/src/mainboard/amd/thatcher/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; }
-extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0;
/* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/torpedo/get_bus_conf.c b/src/mainboard/amd/torpedo/get_bus_conf.c index 3f8f50e..b88e3fb 100644 --- a/src/mainboard/amd/torpedo/get_bus_conf.c +++ b/src/mainboard/amd/torpedo/get_bus_conf.c @@ -31,26 +31,6 @@ */ u8 bus_sb900[6];
-/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - -u32 sbdn_sb900; - void get_bus_conf(void) { device_t dev; @@ -58,23 +38,21 @@ void get_bus_conf(void)
printk(BIOS_DEBUG, "Mainboard - %s - %s - Start.\n", __FILE__, __func__);
- sbdn_sb900 = 0;
memset(bus_sb900, 0, sizeof(bus_sb900));
- bus_sb900[0] = (pci1234x[0] >> 16) & 0xff;
/* sb900 */ - dev = dev_find_slot(bus_sb900[0], PCI_DEVFN(sbdn_sb900 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sb900[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb900[0], - PCI_DEVFN(sbdn_sb900 + 0x14, i)); + dev = dev_find_slot(0, + PCI_DEVFN(0x14, i)); if (dev) { bus_sb900[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/amd/torpedo/irq_tables.c b/src/mainboard/amd/torpedo/irq_tables.c index f47d9dc..c501125 100644 --- a/src/mainboard/amd/torpedo/irq_tables.c +++ b/src/mainboard/amd/torpedo/irq_tables.c @@ -45,8 +45,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb900[6]; -extern unsigned long sbdn_sb900;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -72,8 +70,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb900[0]; - pirq->rtr_devfn = ((sbdn_sb900 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -89,7 +87,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb900[0], ((sbdn_sb900 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/union_station/get_bus_conf.c b/src/mainboard/amd/union_station/get_bus_conf.c index 0b55a2a..52b5d88 100644 --- a/src/mainboard/amd/union_station/get_bus_conf.c +++ b/src/mainboard/amd/union_station/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800;
-/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800;
void get_bus_conf(void) { @@ -52,18 +42,15 @@ void get_bus_conf(void) int i;
- sbdn_sb800 = 0;
memset(bus_sb800, 0, sizeof(bus_sb800));
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
/* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
@@ -72,7 +59,7 @@ void get_bus_conf(void) }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/union_station/irq_tables.c b/src/mainboard/amd/union_station/irq_tables.c index 840e7b1..12a64a8 100644 --- a/src/mainboard/amd/union_station/irq_tables.c +++ b/src/mainboard/amd/union_station/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/asrock/e350m1/get_bus_conf.c b/src/mainboard/asrock/e350m1/get_bus_conf.c index 2553588..f2c8056 100644 --- a/src/mainboard/asrock/e350m1/get_bus_conf.c +++ b/src/mainboard/asrock/e350m1/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800;
-/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800;
void get_bus_conf(void) { @@ -52,22 +42,19 @@ void get_bus_conf(void) int i;
- sbdn_sb800 = 0;
memset(bus_sb800, 0, sizeof(bus_sb800));
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
/* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/asrock/e350m1/irq_tables.c b/src/mainboard/asrock/e350m1/irq_tables.c index 840e7b1..12a64a8 100644 --- a/src/mainboard/asrock/e350m1/irq_tables.c +++ b/src/mainboard/asrock/e350m1/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/asrock/imb-a180/get_bus_conf.c b/src/mainboard/asrock/imb-a180/get_bus_conf.c index 8610e65..17ff8a5 100644 --- a/src/mainboard/asrock/imb-a180/get_bus_conf.c +++ b/src/mainboard/asrock/imb-a180/get_bus_conf.c @@ -32,16 +32,7 @@ u8 bus_yangtze[6]; u32 apicid_yangtze;
-/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -};
-u32 sbdn_yangtze;
void get_bus_conf(void) { @@ -61,23 +52,20 @@ void get_bus_conf(void) value &= ~(1 << 11); pci_write_config32(dev, 0x60, value);
- sbdn_yangtze = 0;
memset(bus_yangtze, 0, sizeof(bus_yangtze));
- // bus_yangtze[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_yangtze[0] = (pci1234x[0] >> 16) & 0xff;
/* yangtze */ - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_yangtze[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_yangtze[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/asrock/imb-a180/irq_tables.c b/src/mainboard/asrock/imb-a180/irq_tables.c index 29dc999..c1c25ba 100644 --- a/src/mainboard/asrock/imb-a180/irq_tables.c +++ b/src/mainboard/asrock/imb-a180/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; }
-extern u8 bus_yangtze[6]; -extern unsigned long sbdn_yangtze;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_yangtze[0]; - pirq->rtr_devfn = ((sbdn_yangtze + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0;
/* pci bridge */ - write_pirq_info(pirq_info, bus_yangtze[0], ((sbdn_yangtze + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/asus/f2a85-m/get_bus_conf.c b/src/mainboard/asus/f2a85-m/get_bus_conf.c index 389ab8f..fe8253e 100644 --- a/src/mainboard/asus/f2a85-m/get_bus_conf.c +++ b/src/mainboard/asus/f2a85-m/get_bus_conf.c @@ -33,16 +33,7 @@ u8 bus_hudson[6]; u32 apicid_hudson;
-/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -};
-u32 sbdn_hudson;
void get_bus_conf(void) { @@ -51,23 +42,21 @@ void get_bus_conf(void) device_t dev; int i;
- sbdn_hudson = 0;
memset(bus_hudson, 0, sizeof(bus_hudson));
- bus_hudson[0] = (pci1234x[0] >> 16) & 0xff;
/* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/asus/f2a85-m/irq_tables.c b/src/mainboard/asus/f2a85-m/irq_tables.c index 8fb6ff3..d0782c8 100644 --- a/src/mainboard/asus/f2a85-m/irq_tables.c +++ b/src/mainboard/asus/f2a85-m/irq_tables.c @@ -42,8 +42,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; }
-extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -68,8 +66,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -84,7 +82,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0;
/* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/gizmosphere/gizmo/get_bus_conf.c b/src/mainboard/gizmosphere/gizmo/get_bus_conf.c index 646c543..2cc2c0c 100755 --- a/src/mainboard/gizmosphere/gizmo/get_bus_conf.c +++ b/src/mainboard/gizmosphere/gizmo/get_bus_conf.c @@ -34,17 +34,6 @@ u8 bus_sb800[6]; u32 apicid_sb800;
-/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; -
void get_bus_conf(void) { @@ -53,24 +42,21 @@ void get_bus_conf(void) device_t dev; int i;
- sbdn_sb800 = 0;
memset(bus_sb800, 0, sizeof(bus_sb800));
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
/* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/gizmosphere/gizmo/irq_tables.c b/src/mainboard/gizmosphere/gizmo/irq_tables.c index 5ce2be9..bb33568 100755 --- a/src/mainboard/gizmosphere/gizmo/irq_tables.c +++ b/src/mainboard/gizmosphere/gizmo/irq_tables.c @@ -45,8 +45,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -72,8 +70,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -89,7 +87,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c index bd5026d..ef4eeb8 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c +++ b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c @@ -34,17 +34,6 @@ u8 bus_hudson[6]; u32 apicid_hudson;
-/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_hudson; -
void get_bus_conf(void) { @@ -53,21 +42,19 @@ void get_bus_conf(void) device_t dev; int i;
- sbdn_hudson = 0;
memset(bus_hudson, 0, sizeof(bus_hudson));
- bus_hudson[0] = (pci1234x[0] >> 16) & 0xff;
/* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c b/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c index b0f2a15..e445943 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c +++ b/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c @@ -42,8 +42,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; }
-extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -68,8 +66,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -84,7 +82,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0;
/* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c b/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c index 8bc5ddf..cc3ffbb 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c +++ b/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c @@ -36,17 +36,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; u32 apicver_sb800;
-/** - * Here you only need to set value in pci1234 for HT-IO that could be - * installed or not. You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; -
void get_bus_conf(void) { @@ -55,22 +44,19 @@ void get_bus_conf(void) device_t dev; int i;
- sbdn_sb800 = 0;
memset(bus_sb800, 0, sizeof(bus_sb800));
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
/* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c b/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c index 5205a46..a28beb9 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c +++ b/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -70,8 +68,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -86,7 +84,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0;
/* PCI Bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/lippert/frontrunner-af/get_bus_conf.c b/src/mainboard/lippert/frontrunner-af/get_bus_conf.c index e736e54..42270af 100644 --- a/src/mainboard/lippert/frontrunner-af/get_bus_conf.c +++ b/src/mainboard/lippert/frontrunner-af/get_bus_conf.c @@ -33,17 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800;
-/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; -
void get_bus_conf(void) { @@ -52,23 +41,20 @@ void get_bus_conf(void) device_t dev; int i;
- sbdn_sb800 = 0;
memset(bus_sb800, 0, sizeof(bus_sb800));
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
/* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/lippert/frontrunner-af/irq_tables.c b/src/mainboard/lippert/frontrunner-af/irq_tables.c index 840e7b1..12a64a8 100644 --- a/src/mainboard/lippert/frontrunner-af/irq_tables.c +++ b/src/mainboard/lippert/frontrunner-af/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/lippert/toucan-af/get_bus_conf.c b/src/mainboard/lippert/toucan-af/get_bus_conf.c index 20dc3ae..eb40c54 100644 --- a/src/mainboard/lippert/toucan-af/get_bus_conf.c +++ b/src/mainboard/lippert/toucan-af/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800;
-/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800;
void get_bus_conf(void) { @@ -51,22 +41,19 @@ void get_bus_conf(void) device_t dev; int i;
- sbdn_sb800 = 0;
memset(bus_sb800, 0, sizeof(bus_sb800));
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
/* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); }
for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/lippert/toucan-af/irq_tables.c b/src/mainboard/lippert/toucan-af/irq_tables.c index 840e7b1..12a64a8 100644 --- a/src/mainboard/lippert/toucan-af/irq_tables.c +++ b/src/mainboard/lippert/toucan-af/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/supermicro/h8qgi/get_bus_conf.c b/src/mainboard/supermicro/h8qgi/get_bus_conf.c index 549334e..8531e69 100644 --- a/src/mainboard/supermicro/h8qgi/get_bus_conf.c +++ b/src/mainboard/supermicro/h8qgi/get_bus_conf.c @@ -31,14 +31,12 @@ * and acpi_tables busnum is default. */ u8 bus_sp5100[2]; -u32 sbdn_sp5100;
void get_bus_conf(void) { device_t dev; int i;
- sbdn_sp5100 = 0;
for (i = 0; i < ARRAY_SIZE(bus_sp5100); i++) { bus_sp5100[i] = 0; @@ -47,7 +45,7 @@ void get_bus_conf(void) bus_sp5100[0] = 0;
/* sp5100 */ - dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/supermicro/h8qgi/irq_tables.c b/src/mainboard/supermicro/h8qgi/irq_tables.c index 6b1e226..0af225c 100644 --- a/src/mainboard/supermicro/h8qgi/irq_tables.c +++ b/src/mainboard/supermicro/h8qgi/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sp5100[2]; -extern unsigned long sbdn_sp5100;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sp5100[0]; - pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/supermicro/h8qgi/mptable.c b/src/mainboard/supermicro/h8qgi/mptable.c index 754ed54..3793212 100644 --- a/src/mainboard/supermicro/h8qgi/mptable.c +++ b/src/mainboard/supermicro/h8qgi/mptable.c @@ -29,7 +29,6 @@ #include <cpu/amd/amdfam10_sysconf.h>
extern u8 bus_sp5100[2]; -extern u32 sbdn_sp5100;
static void *smp_write_config_table(void *v) { @@ -59,7 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sp5100 = CONFIG_MAX_CPUS + 1; apicid_sr5650 = apicid_sp5100 + 1;
- dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set SP5100 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; diff --git a/src/mainboard/supermicro/h8scm/get_bus_conf.c b/src/mainboard/supermicro/h8scm/get_bus_conf.c index 28c4bf7..46ed054 100644 --- a/src/mainboard/supermicro/h8scm/get_bus_conf.c +++ b/src/mainboard/supermicro/h8scm/get_bus_conf.c @@ -31,14 +31,12 @@ * and acpi_tables busnum is default. */ u8 bus_sp5100[2]; -u32 sbdn_sp5100;
void get_bus_conf(void) { device_t dev; int i;
- sbdn_sp5100 = 0;
for (i = 0; i < 0; i++) { bus_sp5100[i] = 0; @@ -47,7 +45,7 @@ void get_bus_conf(void) bus_sp5100[0] = 0;
/* sp5100 */ - dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/supermicro/h8scm/irq_tables.c b/src/mainboard/supermicro/h8scm/irq_tables.c index 9770e6d..8f72756 100644 --- a/src/mainboard/supermicro/h8scm/irq_tables.c +++ b/src/mainboard/supermicro/h8scm/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sp5100[2]; -extern unsigned long sbdn_sp5100;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sp5100[0]; - pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -87,7 +85,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0;
/* pci bridge */ - write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/supermicro/h8scm/mptable.c b/src/mainboard/supermicro/h8scm/mptable.c index 754ed54..3793212 100644 --- a/src/mainboard/supermicro/h8scm/mptable.c +++ b/src/mainboard/supermicro/h8scm/mptable.c @@ -29,7 +29,6 @@ #include <cpu/amd/amdfam10_sysconf.h>
extern u8 bus_sp5100[2]; -extern u32 sbdn_sp5100;
static void *smp_write_config_table(void *v) { @@ -59,7 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sp5100 = CONFIG_MAX_CPUS + 1; apicid_sr5650 = apicid_sp5100 + 1;
- dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set SP5100 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; diff --git a/src/mainboard/tyan/s8226/get_bus_conf.c b/src/mainboard/tyan/s8226/get_bus_conf.c index 7a6876b..087c042 100644 --- a/src/mainboard/tyan/s8226/get_bus_conf.c +++ b/src/mainboard/tyan/s8226/get_bus_conf.c @@ -30,7 +30,6 @@ * and acpi_tables busnum is default. */ u8 bus_sp5100[2]; -u32 sbdn_sp5100;
void get_bus_conf(void);
@@ -39,7 +38,6 @@ void get_bus_conf(void) device_t dev; int i;
- sbdn_sp5100 = 0;
for (i = 0; i < 0; i++) { bus_sp5100[i] = 0; @@ -48,7 +46,7 @@ void get_bus_conf(void) bus_sp5100[0] = 0;
/* sp5100 */ - dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
if (dev) { bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/tyan/s8226/irq_tables.c b/src/mainboard/tyan/s8226/irq_tables.c index 6b1e226..0af225c 100644 --- a/src/mainboard/tyan/s8226/irq_tables.c +++ b/src/mainboard/tyan/s8226/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sp5100[2]; -extern unsigned long sbdn_sp5100;
unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION;
- pirq->rtr_bus = bus_sp5100[0]; - pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
pirq->exclusive_irqs = 0;
@@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
/* pci bridge */ - write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/tyan/s8226/mptable.c b/src/mainboard/tyan/s8226/mptable.c index 6a12f2b..3793212 100644 --- a/src/mainboard/tyan/s8226/mptable.c +++ b/src/mainboard/tyan/s8226/mptable.c @@ -29,8 +29,6 @@ #include <cpu/amd/amdfam10_sysconf.h>
extern u8 bus_sp5100[2]; -extern u32 sbdn_sr5650; -extern u32 sbdn_sp5100;
static void *smp_write_config_table(void *v) { @@ -60,7 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sp5100 = CONFIG_MAX_CPUS + 1; apicid_sr5650 = apicid_sp5100 + 1;
- dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set SP5100 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0;