Gabe Black (gabeblack@chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3650
-gerrit
commit cf7ec626ebab8ac33d2e2d5feba57c063d1ee646 Author: Gabe Black gabeblack@google.com Date: Sat May 18 15:55:47 2013 -0700
snow: Make coreboot set up pins for busses it knows are hooked up as such.
Coreboot knows that, for the snow board, certain pins are to be connected to bus controllers in the SOC and to the wires of a bus external to the SOC. It can configure them as such and free its payload from having to know how to set everything up.
Change-Id: I1bb127c810e9ee077afc4227a6f316eaa53d6498 Signed-off-by: Gabe Black gabeblack@chromium.org --- src/mainboard/google/snow/mainboard.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
diff --git a/src/mainboard/google/snow/mainboard.c b/src/mainboard/google/snow/mainboard.c index 250b71f..2dd56fc 100644 --- a/src/mainboard/google/snow/mainboard.c +++ b/src/mainboard/google/snow/mainboard.c @@ -176,6 +176,32 @@ static void disable_usb30_pll(void) gpio_direction_output(usb3_pll_l, 0); }
+static void gpio_init(void) +{ + /* Set up the I2C busses. */ + exynos_pinmux_config(PERIPH_ID_I2C0, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C1, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C2, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C3, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C4, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE); + + /* Set up the GPIOs used to arbitrate for I2C bus 4. */ + gpio_set_pull(GPIO_F03, GPIO_PULL_NONE); + gpio_set_pull(GPIO_E04, GPIO_PULL_NONE); + gpio_direction_output(GPIO_F03, 1); + gpio_direction_input(GPIO_E04); + + /* Set up the GPIO used to enable the audio codec. */ + gpio_set_pull(GPIO_X17, GPIO_PULL_NONE); + gpio_set_pull(GPIO_X15, GPIO_PULL_NONE); + gpio_direction_output(GPIO_X17, 1); + gpio_direction_output(GPIO_X15, 1); + + /* Set up the I2S busses. */ + exynos_pinmux_config(PERIPH_ID_I2S1, PINMUX_FLAG_NONE); +} + /* this happens after cpu_init where exynos resources are set */ static void mainboard_init(device_t dev) { @@ -186,6 +212,8 @@ static void mainboard_init(device_t dev) }; void *fb_addr;
+ gpio_init(); + i2c_init(TPS69050_BUS, I2C_0_SPEED, I2C_SLAVE); i2c_init(7, I2C_0_SPEED, I2C_SLAVE);