Kevin Chang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/52878 )
Change subject: mb/google/octopus: add audio codec into SSFC support for Phaser ......................................................................
mb/google/octopus: add audio codec into SSFC support for Phaser
Add audio codec module RT5682I in project.
BUG=b:182221327 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682I or DA7219 then check whether device tree is updated correspondingly by disabling unselected one.
Signed-off-by: Kevin Chang kevin.chang@lcfc.corp-partner.google.com Change-Id: I202f71f57ad2db84fb90b52f9ffd7a1fd05494a3 --- M src/mainboard/google/octopus/Kconfig.name M src/mainboard/google/octopus/variants/phaser/gpio.c M src/mainboard/google/octopus/variants/phaser/overridetree.cb 3 files changed, 18 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/78/52878/1
diff --git a/src/mainboard/google/octopus/Kconfig.name b/src/mainboard/google/octopus/Kconfig.name index b384a66..a5c1380 100644 --- a/src/mainboard/google/octopus/Kconfig.name +++ b/src/mainboard/google/octopus/Kconfig.name @@ -16,6 +16,7 @@ select BASEBOARD_OCTOPUS_LAPTOP select BOARD_GOOGLE_BASEBOARD_OCTOPUS select NHLT_DA7219 if INCLUDE_NHLT_BLOBS + select NHLT_RT5682I if INCLUDE_NHLT_BLOBS
config BOARD_GOOGLE_LICK bool "-> Lick" diff --git a/src/mainboard/google/octopus/variants/phaser/gpio.c b/src/mainboard/google/octopus/variants/phaser/gpio.c index 29b64b5..257de73 100644 --- a/src/mainboard/google/octopus/variants/phaser/gpio.c +++ b/src/mainboard/google/octopus/variants/phaser/gpio.c @@ -14,6 +14,8 @@ PAD_NC(GPIO_53, UP_20K), PAD_NC(GPIO_67, UP_20K), PAD_NC(GPIO_117, UP_20K), + PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP,LEVEL, INVERT, HIZCRx1, + DISPUPD), PAD_NC(GPIO_143, UP_20K),
/* EN_PP3300_TOUCHSCREEN */ @@ -35,6 +37,8 @@ PAD_NC(GPIO_53, UP_20K), PAD_NC(GPIO_67, UP_20K), PAD_NC(GPIO_117, UP_20K), + PAD_CFG_GPI_APIC_IOS(GPIO_137,NONE, DEEP, LEVEL, INVERT, HIZCRx1, + DISPUPD), PAD_NC(GPIO_143, UP_20K),
/* EN_PP3300_TOUCHSCREEN */ diff --git a/src/mainboard/google/octopus/variants/phaser/overridetree.cb b/src/mainboard/google/octopus/variants/phaser/overridetree.cb index fb2936a..98ec36b 100644 --- a/src/mainboard/google/octopus/variants/phaser/overridetree.cb +++ b/src/mainboard/google/octopus/variants/phaser/overridetree.cb @@ -113,6 +113,19 @@ register "mic_amp_in_sel" = ""diff"" device i2c 1a on end end + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682I"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_137_IRQ)" + register "probed" = "1" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end end # - I2C 5 device pci 17.2 on chip drivers/i2c/generic