Furquan Shaikh (furquan@google.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5571
-gerrit
commit c8f9aa5fc7b376e1c5d8b052681d24d5835a12e0 Author: Furquan Shaikh furquan@google.com Date: Tue Apr 22 16:33:22 2014 -0700
Move redundant Makefile rules from arch to top level.
Remove all the common Makefile rules like coreboot.pre, coreboot.pre1 and others from arch level Makefile.inc to top level Makefile.inc. Also, organize Makefile.inc at arch level into per-stage rules and variables.
Change-Id: I7dc5b2d31c959b55bb92d9c7811427c4dada1db5 Signed-off-by: Furquan Shaikh furquan@google.com --- Makefile.inc | 157 +++++++++++++++++ src/arch/armv7/Makefile.inc | 264 +++++++++++----------------- src/arch/x86/Makefile.inc | 409 +++++++++++++++----------------------------- 3 files changed, 390 insertions(+), 440 deletions(-)
diff --git a/Makefile.inc b/Makefile.inc index 72f3951..ba73d98 100644 --- a/Makefile.inc +++ b/Makefile.inc @@ -408,3 +408,160 @@ crossgcc-clean: clean-for-update
tools: $(objutil)/kconfig/conf $(objutil)/cbfstool/cbfstool $(objutil)/cbfstool/rmodtool $(objutil)/nvramtool/nvramtool $(objutil)/romcc/romcc $(objutil)/sconfig/sconfig
+######################################################################################################################################################################## +# Common recipes for all stages +######################################################################################################################################################################## + +$(objcbfs)/%.bin: $(objcbfs)/%.elf + @printf " OBJCOPY $(subst $(obj)/,,$(@))\n" + $(OBJCOPY) -O binary $< $@ + +$(objcbfs)/%.elf: $(objcbfs)/%.debug + @printf " OBJCOPY $(subst $(obj)/,,$(@))\n" + cp $< $@.tmp + $(NM) -n $@.tmp | sort > $(basename $@).map + $(OBJCOPY) --strip-debug $@.tmp + $(OBJCOPY) --add-gnu-debuglink=$< $@.tmp + mv $@.tmp $@ + +######################################################################################################################################################################## +# Build the final rom image +######################################################################################################################################################################## + +COREBOOT_ROM_DEPENDENCIES:= +ifeq ($(CONFIG_PAYLOAD_ELF),y) +COREBOOT_ROM_DEPENDENCIES+=$(CONFIG_PAYLOAD_FILE) +endif +ifeq ($(CONFIG_PAYLOAD_SEABIOS),y) +COREBOOT_ROM_DEPENDENCIES+=seabios +endif +ifeq ($(CONFIG_PAYLOAD_FILO),y) +COREBOOT_ROM_DEPENDENCIES+=filo +endif +ifeq ($(CONFIG_PAYLOAD_GRUB2),y) +COREBOOT_ROM_DEPENDENCIES+=grub2 +endif + +extract_nth=$(word $(1), $(subst |, ,$(2))) + +ifneq ($(CONFIG_UPDATE_IMAGE),y) +prebuild-files = \ + $(foreach file,$(cbfs-files), \ + $(CBFSTOOL) $@.tmp \ + add$(if $(filter stage,$(call extract_nth,3,$(file))),-stage)$(if $(filter payload,$(call extract_nth,3,$(file))),-payload) \ + -f $(call extract_nth,1,$(file)) \ + -n $(call extract_nth,2,$(file)) $(if $(filter-out stage,$(call extract_nth,3,$(file))),-t $(call extract_nth,3,$(file))) \ + $(if $(call extract_nth,4,$(file)),-b $(call extract_nth,4,$(file))) &&) +prebuilt-files = $(foreach file,$(cbfs-files), $(call extract_nth,1,$(file))) + +$(obj)/coreboot.pre1: $(objcbfs)/bootblock.bin $$(prebuilt-files) $(CBFSTOOL) $$(cpu_ucode_cbfs_file) + $(CBFSTOOL) $@.tmp create -s $(CONFIG_COREBOOT_ROMSIZE_KB)K \ + -B $(objcbfs)/bootblock.bin -a 64 \ + $(CBFSTOOL_PRE1_OPTS) + $(prebuild-files) true + $(call add-cpu-microcode-to-cbfs,$@.tmp) + mv $@.tmp $@ +else +.PHONY: $(obj)/coreboot.pre1 +$(obj)/coreboot.pre1: $(CBFSTOOL) + mv $(obj)/coreboot.rom $@ +endif + +ifeq ($(CONFIG_PAYLOAD_LINUX),y) +LINUX_ADDITIONAL_CONFIG:= +ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),) + LINUX_ADDITIONAL_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE) +endif +ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))),) + LINUX_ADDITIONAL_CONFIG+=-I $(CONFIG_LINUX_INITRD) +endif +endif + +ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y) +REFCODE_BLOB=$(obj)/refcode.rmod +$(REFCODE_BLOB): $(RMODTOOL) + $(RMODTOOL) -i $(CONFIG_REFCODE_BLOB_FILE) -o $@ +endif + +$(obj)/coreboot.rom: $(obj)/coreboot.pre $(objcbfs)/ramstage.elf $(CBFSTOOL) $(call strip_quotes,$(COREBOOT_ROM_DEPENDENCIES)) $$(INTERMEDIATE) $$(VBOOT_STUB) $(REFCODE_BLOB) + @printf " CBFS $(subst $(obj)/,,$(@))\n" + cp $(obj)/coreboot.pre $@.tmp + $(CBFSTOOL) $@.tmp add-stage -f $(objcbfs)/ramstage.elf -n $(CONFIG_CBFS_PREFIX)/ramstage -c $(CBFS_COMPRESS_FLAG) +ifeq ($(CONFIG_PAYLOAD_NONE),y) + @printf " PAYLOAD none (as specified by user)\n" +endif +ifeq ($(CONFIG_PAYLOAD_ELF),y) + @printf " PAYLOAD $(CONFIG_PAYLOAD_FILE) (compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" + $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) +endif +ifeq ($(CONFIG_PAYLOAD_LINUX),y) + @printf " PAYLOAD $(CONFIG_PAYLOAD_FILE) (compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" + $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) $(LINUX_ADDITIONAL_CONFIG) +endif +ifeq ($(CONFIG_PAYLOAD_SEABIOS),y) + @printf " PAYLOAD SeaBIOS (internal, compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" + $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) +ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),) +ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0) + @printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n" + $(CBFSTOOL) $@.tmp add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup +endif +endif +endif +ifeq ($(CONFIG_PAYLOAD_FILO),y) + @printf " PAYLOAD FILO (internal, compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" + $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) +endif +ifeq ($(CONFIG_PAYLOAD_GRUB2),y) + @printf " PAYLOAD GRUB2 (internal, compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" + $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) +endif +ifeq ($(CONFIG_PAYLOAD_TIANOCORE),y) + @printf " PAYLOAD Tiano Core (compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" + $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) +endif +ifeq ($(CONFIG_INCLUDE_CONFIG_FILE),y) + @printf " CONFIG $(DOTCONFIG)\n" + if [ -f $(DOTCONFIG) ]; then \ + echo "# This image was built using git revision" `git rev-parse HEAD` > $(obj)/config.tmp ; \ + sed -e '/^#/d' -e '/^ *$$/d' $(DOTCONFIG) >> $(obj)/config.tmp ; \ + $(CBFSTOOL) $@.tmp add -f $(obj)/config.tmp -n config -t raw; rm -f $(obj)/config.tmp ; fi +endif +ifeq ($(CONFIG_VBOOT_VERIFY_FIRMWARE),y) + $(CBFSTOOL) $@.tmp add-stage -f $(VBOOT_STUB) -n $(CONFIG_CBFS_PREFIX)/vboot -c $(CBFS_COMPRESS_FLAG) +endif +ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y) + $(CBFSTOOL) $@.tmp add-stage -f $(REFCODE_BLOB) -n $(CONFIG_CBFS_PREFIX)/refcode -c $(CBFS_COMPRESS_FLAG) +endif +ifeq ($(CONFIG_PXE_ROM),y) + $(CBFSTOOL) $@.tmp add -f $(CONFIG_PXE_ROM_FILE) -n pci$(CONFIG_PXE_ROM_ID).rom -t raw +endif +ifeq ($(CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE),y) +ifeq ($(CONFIG_CPU_MICROCODE_IN_CBFS),y) + @printf " UPDATE-FIT \n" + $(CBFSTOOL) $@.tmp update-fit -n cpu_microcode_blob.bin -x $(CONFIG_CPU_INTEL_NUM_FIT_ENTRIES) +endif +endif + mv $@.tmp $@ + @printf " CBFSPRINT $(subst $(obj)/,,$(@))\n\n" + $(CBFSTOOL) $@ print + +cbfs-files-$(CONFIG_BOOTSPLASH) += bootsplash.jpg +bootsplash.jpg-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE)) +bootsplash.jpg-type := bootsplash + +ifeq ($(CONFIG_ARCH_ARMV7),y) +ROMSTAGE_ELF := romstage.elf +endif +ifeq ($(CONFIG_ARCH_X86),y) +ROMSTAGE_ELF := romstage_xip.elf +endif + +$(obj)/coreboot.pre: $(objcbfs)/$(ROMSTAGE_ELF) $(obj)/coreboot.pre1 $(CBFSTOOL) + @printf " CBFS $(subst $(obj)/,,$(@))\n" + cp $(obj)/coreboot.pre1 $@.tmp + $(CBFSTOOL) $@.tmp add-stage \ + -f $(objcbfs)/$(ROMSTAGE_ELF) \ + -n $(CONFIG_CBFS_PREFIX)/romstage -c none \ + $(CBFSTOOL_PRE_OPTS) + mv $@.tmp $@ diff --git a/src/arch/armv7/Makefile.inc b/src/arch/armv7/Makefile.inc index 6395b0c..a419dcd 100644 --- a/src/arch/armv7/Makefile.inc +++ b/src/arch/armv7/Makefile.inc @@ -22,91 +22,18 @@ ## ################################################################################
+################################################################################ # Take care of subdirectories +################################################################################ subdirs-y += boot/ subdirs-y += lib/
################################################################################ -# Build the final rom image -COREBOOT_ROM_DEPENDENCIES:= -ifeq ($(CONFIG_PAYLOAD_ELF),y) -COREBOOT_ROM_DEPENDENCIES+=$(CONFIG_PAYLOAD_FILE) -endif - -extract_nth=$(word $(1), $(subst |, ,$(2))) - -ifneq ($(CONFIG_UPDATE_IMAGE),y) -prebuild-files = \ - $(foreach file,$(cbfs-files), \ - $(CBFSTOOL) $@.tmp \ - add$(if $(filter stage,$(call extract_nth,3,$(file))),-stage)$(if $(filter payload,$(call extract_nth,3,$(file))),-payload) \ - -f $(call extract_nth,1,$(file)) \ - -n $(call extract_nth,2,$(file)) $(if $(filter-out stage,$(call extract_nth,3,$(file))),-t $(call extract_nth,3,$(file))) \ - $(if $(call extract_nth,4,$(file)),-b $(call extract_nth,4,$(file))) &&) -prebuilt-files = $(foreach file,$(cbfs-files), $(call extract_nth,1,$(file))) - -# TODO Change -b to Kconfig variable. -$(obj)/coreboot.pre: $(objcbfs)/bootblock.bin $(objcbfs)/romstage.elf $$(prebuilt-files) $(CBFSTOOL) $$(cpu_ucode_cbfs_file) - $(CBFSTOOL) $@.tmp create -m armv7 -s $(CONFIG_COREBOOT_ROMSIZE_KB)K \ - -B $(objcbfs)/bootblock.bin -a 64 \ - -b $(CONFIG_BOOTBLOCK_ROM_OFFSET) \ - -H $(CONFIG_CBFS_HEADER_ROM_OFFSET) \ - -o $(CONFIG_CBFS_ROM_OFFSET) - @printf " CBFS $(subst $(obj)/,,$(@))\n" - $(CBFSTOOL) $@.tmp add-stage \ - -f $(objcbfs)/romstage.elf -b 0 \ - -n $(CONFIG_CBFS_PREFIX)/romstage -c none - $(prebuild-files) true - $(call add-cpu-microcode-to-cbfs,$@.tmp) - mv $@.tmp $@ -else -.PHONY: $(obj)/coreboot.pre -$(obj)/coreboot.pre: $(CBFSTOOL) - mv $(obj)/coreboot.rom $@ -endif - -$(obj)/coreboot.rom: $(obj)/coreboot.pre $(objcbfs)/ramstage.elf $(CBFSTOOL) $(call strip_quotes,$(COREBOOT_ROM_DEPENDENCIES)) $$(INTERMEDIATE) - @printf " CBFS $(subst $(obj)/,,$(@))\n" - cp $(obj)/coreboot.pre $@.tmp - $(CBFSTOOL) $@.tmp add-stage -f $(objcbfs)/ramstage.elf -n $(CONFIG_CBFS_PREFIX)/ramstage -c $(CBFS_COMPRESS_FLAG) -ifeq ($(CONFIG_PAYLOAD_NONE),y) - @printf " PAYLOAD none (as specified by user)\n" -endif -ifeq ($(CONFIG_PAYLOAD_ELF),y) - @printf " PAYLOAD $(CONFIG_PAYLOAD_FILE) (compression: $(CBFS_PAYLOAD_COMPRESS_NAME))\n" - $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) -endif -ifeq ($(CONFIG_INCLUDE_CONFIG_FILE),y) - @printf " CONFIG $(DOTCONFIG)\n" - if [ -f $(DOTCONFIG) ]; then \ - echo "# This image was built using git revision" `git rev-parse HEAD` > $(obj)/config.tmp ; \ - sed -e '/^#/d' -e '/^ *$$/d' $(DOTCONFIG) >> $(obj)/config.tmp ; \ - $(CBFSTOOL) $@.tmp add -f $(obj)/config.tmp -n config -t raw; rm -f $(obj)/config.tmp ; fi -endif - mv $@.tmp $@ - @printf " CBFSPRINT $(subst $(obj)/,,$(@))\n\n" - $(CBFSTOOL) $@ print - -bootsplash.jpg-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE)) -bootsplash.jpg-type := bootsplash - +# ARM specific options ################################################################################ -# armv7 specific tools
-################################################################################ -# Common recipes for all stages - -$(objcbfs)/%.bin: $(objcbfs)/%.elf - @printf " OBJCOPY $(subst $(obj)/,,$(@))\n" - $(OBJCOPY) -O binary $< $@ - -$(objcbfs)/%.elf: $(objcbfs)/%.debug - @printf " OBJCOPY $(subst $(obj)/,,$(@))\n" - cp $< $@.tmp - $(NM) -n $@.tmp | sort > $(basename $@).map - $(OBJCOPY) --strip-debug $@.tmp - $(OBJCOPY) --add-gnu-debuglink=$< $@.tmp - mv $@.tmp $@ +CBFSTOOL_PRE1_OPTS = -m armv7 -b $(CONFIG_BOOTBLOCK_ROM_OFFSET) -H $(CONFIG_CBFS_HEADER_ROM_OFFSET) -o $(CONFIG_CBFS_ROM_OFFSET) +CBFSTOOL_PRE_OPTS = -b 0
stages_c = $(src)/arch/armv7/stages.c stages_o = $(obj)/arch/armv7/stages.o @@ -115,26 +42,6 @@ $(stages_o): $(stages_c) $(obj)/config.h @printf " CC $(subst $(obj)/,,$(@))\n" $(CC) -I. $(INCLUDES) -c -o $@ $< -marm
- -################################################################################ -# Build the ramstage (stage 2) - -$(objcbfs)/ramstage.debug: $(objgenerated)/ramstage.o $(src)/arch/armv7/ramstage.ld - @printf " CC $(subst $(obj)/,,$(@))\n" -ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) - $(LD) -m armelf_linux_eabi -o $@ -L$(obj) $< -T $(src)/arch/armv7/ramstage.ld -else - $(CC) -nostdlib -nostartfiles -static -o $@ -L$(obj) -T $(src)/arch/armv7/ramstage.ld $< -endif - -$(objgenerated)/ramstage.o: $(stages_o) $$(ramstage-objs) $(LIBGCC_FILE_NAME) - @printf " CC $(subst $(obj)/,,$(@))\n" -ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) - $(LD) -m -m armelf_linux_eabi -r -o $@ --wrap __divdi3 --wrap __udivdi3 --wrap __moddi3 --wrap __umoddi3 --wrap __uidiv --start-group $(ramstage-objs) $(LIBGCC_FILE_NAME) --end-group -else - $(CC) $(CFLAGS) -nostdlib -r -o $@ -Wl,--start-group $(stages_o) $(ramstage-objs) $(LIBGCC_FILE_NAME) -Wl,--end-group -endif - CFLAGS += \ -ffixed-r8\ -march=armv7-a\ @@ -143,82 +50,16 @@ CFLAGS += \ -mthumb\ -mthumb-interwork
-ldscripts = -ldscripts += $(src)/arch/armv7/romstage.ld - -#crt0s += $(src)/cpu/arm/fpu_enable.inc -# FIXME: CONFIG_NEON or something similar for ARM? -#ifeq ($(CONFIG_SSE),y) -#crt0s += $(src)/cpu/arm/sse_enable.inc -#endif - -crt0s += $(cpu_incs) -crt0s += $(cpu_incs-y) - -$(obj)/mainboard/$(MAINBOARDDIR)/romstage.pre.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(OPTION_TABLE_H) $(obj)/build.h $(obj)/config.h - @printf " CC romstage.inc\n" - $(CC) -MMD $(CFLAGS) -D__PRE_RAM__ -I$(src) -I. -I$(obj) -c -S $< -o $@ - -# Things that appear in every board -ramstage-y += exception.c -ramstage-y += exception_asm.S +################################################################################ +# Bootblock +################################################################################
bootblock-y += cache.c - -romstage-y += cache.c -romstage-y += div0.c - -ramstage-y += div0.c -#ramstage-y += interrupts.c -ramstage-y += cache.c -ramstage-y += mmu.c - -romstage-y += eabi_compat.c -ramstage-y += eabi_compat.c bootblock-y += eabi_compat.c - -ramstage-y += boot.c -ramstage-y += tables.c - -romstage-y += memset.S -ramstage-y += memset.S bootblock-y += memset.S -romstage-y += memcpy.S -ramstage-y += memcpy.S bootblock-y += memcpy.S -romstage-y += memmove.S -ramstage-y += memmove.S bootblock-y += memmove.S
-romstage-srcs += $(objgenerated)/crt0.s -ramstage-srcs += $(wildcard src/mainboard/$(MAINBOARDDIR)/mainboard.c) -ifeq ($(CONFIG_GENERATE_PIRQ_TABLE),y) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/irq_tables.c -endif -ifeq ($(CONFIG_BOARD_HAS_HARD_RESET),y) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/reset.c -endif -ifeq ($(CONFIG_GENERATE_ACPI_TABLES),y) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/acpi_tables.c -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/dsdt.asl -# make doesn't have arithmetic operators or greater-than comparisons -ifeq ($(subst 5,4,$(CONFIG_ACPI_SSDTX_NUM)),4) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt2.asl -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt3.asl -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt4.asl -endif -ifeq ($(CONFIG_ACPI_SSDTX_NUM),5) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt5.asl -endif -endif - -ifeq ($(CONFIG_HAVE_BUS_CONFIG),y) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/get_bus_conf.c -endif - -################################################################################ -# Build the bootblock - bootblock_lds = $(src)/arch/armv7/bootblock.lds bootblock_lds += $(chipset_bootblock_lds)
@@ -262,6 +103,30 @@ else endif
################################################################################ +# Romstage +################################################################################ + +romstage-y += cache.c +romstage-y += div0.c +romstage-y += eabi_compat.c +romstage-y += memset.S +romstage-y += memcpy.S +romstage-y += memmove.S +romstage-srcs += $(objgenerated)/crt0.s + +ldscripts = +ldscripts += $(src)/arch/armv7/romstage.ld + + +#crt0s += $(src)/cpu/arm/fpu_enable.inc +# FIXME: CONFIG_NEON or something similar for ARM? +#ifeq ($(CONFIG_SSE),y) +#crt0s += $(src)/cpu/arm/sse_enable.inc +#endif + +crt0s += $(cpu_incs) +crt0s += $(cpu_incs-y) + # Build the romstage
$(objcbfs)/romstage.debug: $$(romstage-objs) $(stages_o) $(objgenerated)/romstage.ld @@ -290,3 +155,68 @@ $(objgenerated)/crt0.s: $(objgenerated)/crt0.romstage.S $(obj)/config.h $(obj)/b @printf " CC $(subst $(obj)/,,$(@))\n" $(CC) -MMD -x assembler-with-cpp -E -I$(src)/include -I$(src)/arch/armv7/include -I$(obj) -include $(obj)/config.h -include $(obj)/build.h -I. -I$(src) $< -o $@
+$(obj)/mainboard/$(MAINBOARDDIR)/romstage.pre.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(OPTION_TABLE_H) $(obj)/build.h $(obj)/config.h + @printf " CC romstage.inc\n" + $(CC) -MMD $(CFLAGS) -D__PRE_RAM__ -I$(src) -I. -I$(obj) -c -S $< -o $@ + +################################################################################ +# Ramstage +################################################################################ + +# Things that appear in every board +ramstage-y += exception.c +ramstage-y += exception_asm.S +ramstage-y += div0.c +#ramstage-y += interrupts.c +ramstage-y += cache.c +ramstage-y += mmu.c +ramstage-y += eabi_compat.c +ramstage-y += boot.c +ramstage-y += tables.c +ramstage-y += memset.S +ramstage-y += memcpy.S +ramstage-y += memmove.S +ramstage-srcs += $(wildcard src/mainboard/$(MAINBOARDDIR)/mainboard.c) + +# Build the ramstage (stage 2) + +$(objcbfs)/ramstage.debug: $(objgenerated)/ramstage.o $(src)/arch/armv7/ramstage.ld + @printf " CC $(subst $(obj)/,,$(@))\n" +ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) + $(LD) -m armelf_linux_eabi -o $@ -L$(obj) $< -T $(src)/arch/armv7/ramstage.ld +else + $(CC) -nostdlib -nostartfiles -static -o $@ -L$(obj) -T $(src)/arch/armv7/ramstage.ld $< +endif + +$(objgenerated)/ramstage.o: $(stages_o) $$(ramstage-objs) $(LIBGCC_FILE_NAME) + @printf " CC $(subst $(obj)/,,$(@))\n" +ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) + $(LD) -m -m armelf_linux_eabi -r -o $@ --wrap __divdi3 --wrap __udivdi3 --wrap __moddi3 --wrap __umoddi3 --wrap __uidiv --start-group $(ramstage-objs) $(LIBGCC_FILE_NAME) --end-group +else + $(CC) $(CFLAGS) -nostdlib -r -o $@ -Wl,--start-group $(stages_o) $(ramstage-objs) $(LIBGCC_FILE_NAME) -Wl,--end-group +endif + +ifeq ($(CONFIG_GENERATE_PIRQ_TABLE),y) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/irq_tables.c +endif +ifeq ($(CONFIG_BOARD_HAS_HARD_RESET),y) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/reset.c +endif +ifeq ($(CONFIG_GENERATE_ACPI_TABLES),y) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/acpi_tables.c +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/dsdt.asl +# make doesn't have arithmetic operators or greater-than comparisons +ifeq ($(subst 5,4,$(CONFIG_ACPI_SSDTX_NUM)),4) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt2.asl +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt3.asl +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt4.asl +endif +ifeq ($(CONFIG_ACPI_SSDTX_NUM),5) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt5.asl +endif +endif + +ifeq ($(CONFIG_HAVE_BUS_CONFIG),y) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/get_bus_conf.c +endif + diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index db8e500..79caabd 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -21,7 +21,9 @@ ## ################################################################################
+################################################################################ # Take care of subdirectories +################################################################################ subdirs-y += boot # subdirs-y += init subdirs-y += lib @@ -42,128 +44,6 @@ cmos_layout.bin-type = 0x01aa OPTION_TABLE_H:=$(obj)/option_table.h endif
-################################################################################ -# Build the final rom image -COREBOOT_ROM_DEPENDENCIES:= -ifeq ($(CONFIG_PAYLOAD_ELF),y) -COREBOOT_ROM_DEPENDENCIES+=$(CONFIG_PAYLOAD_FILE) -endif -ifeq ($(CONFIG_PAYLOAD_SEABIOS),y) -COREBOOT_ROM_DEPENDENCIES+=seabios -endif -ifeq ($(CONFIG_PAYLOAD_FILO),y) -COREBOOT_ROM_DEPENDENCIES+=filo -endif -ifeq ($(CONFIG_PAYLOAD_GRUB2),y) -COREBOOT_ROM_DEPENDENCIES+=grub2 -endif - -extract_nth=$(word $(1), $(subst |, ,$(2))) - -ifneq ($(CONFIG_UPDATE_IMAGE),y) -prebuild-files = \ - $(foreach file,$(cbfs-files), \ - $(CBFSTOOL) $@.tmp \ - add$(if $(filter stage,$(call extract_nth,3,$(file))),-stage)$(if $(filter payload,$(call extract_nth,3,$(file))),-payload) \ - -f $(call extract_nth,1,$(file)) \ - -n $(call extract_nth,2,$(file)) $(if $(filter-out stage,$(call extract_nth,3,$(file))),-t $(call extract_nth,3,$(file))) \ - $(if $(call extract_nth,4,$(file)),-b $(call extract_nth,4,$(file))) &&) -prebuilt-files = $(foreach file,$(cbfs-files), $(call extract_nth,1,$(file))) - -$(obj)/coreboot.pre1: $(objcbfs)/bootblock.bin $$(prebuilt-files) $(CBFSTOOL) $$(cpu_ucode_cbfs_file) - $(CBFSTOOL) $@.tmp create -m x86 -s $(CONFIG_COREBOOT_ROMSIZE_KB)K \ - -B $(objcbfs)/bootblock.bin -a 64 \ - -o $$(( $(CONFIG_ROM_SIZE) - $(CONFIG_CBFS_SIZE) )) - $(prebuild-files) true - $(call add-cpu-microcode-to-cbfs,$@.tmp) - mv $@.tmp $@ -else -.PHONY: $(obj)/coreboot.pre1 -$(obj)/coreboot.pre1: $(CBFSTOOL) - mv $(obj)/coreboot.rom $@ -endif - -ifeq ($(CONFIG_PAYLOAD_LINUX),y) -LINUX_ADDITIONAL_CONFIG:= -ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_COMMAND_LINE))),) - LINUX_ADDITIONAL_CONFIG+=-C $(CONFIG_LINUX_COMMAND_LINE) -endif -ifneq ($(strip $(call strip_quotes,$(CONFIG_LINUX_INITRD))),) - LINUX_ADDITIONAL_CONFIG+=-I $(CONFIG_LINUX_INITRD) -endif -endif - -ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y) -REFCODE_BLOB=$(obj)/refcode.rmod -$(REFCODE_BLOB): $(RMODTOOL) - $(RMODTOOL) -i $(CONFIG_REFCODE_BLOB_FILE) -o $@ -endif - -$(obj)/coreboot.rom: $(obj)/coreboot.pre $(objcbfs)/ramstage.elf $(CBFSTOOL) $(call strip_quotes,$(COREBOOT_ROM_DEPENDENCIES)) $$(INTERMEDIATE) $$(VBOOT_STUB) $(REFCODE_BLOB) - @printf " CBFS $(subst $(obj)/,,$(@))\n" - cp $(obj)/coreboot.pre $@.tmp - $(CBFSTOOL) $@.tmp add-stage -f $(objcbfs)/ramstage.elf -n $(CONFIG_CBFS_PREFIX)/ramstage -c $(CBFS_COMPRESS_FLAG) -ifeq ($(CONFIG_PAYLOAD_NONE),y) - @printf " PAYLOAD none (as specified by user)\n" -endif -ifeq ($(CONFIG_PAYLOAD_ELF),y) - @printf " PAYLOAD $(CONFIG_PAYLOAD_FILE) (compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" - $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) -endif -ifeq ($(CONFIG_PAYLOAD_LINUX),y) - @printf " PAYLOAD $(CONFIG_PAYLOAD_FILE) (compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" - $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) $(LINUX_ADDITIONAL_CONFIG) -endif -ifeq ($(CONFIG_PAYLOAD_SEABIOS),y) - @printf " PAYLOAD SeaBIOS (internal, compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" - $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) -ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),) -ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0) - @printf " SeaBIOS Wait up to $(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n" - $(CBFSTOOL) $@.tmp add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n etc/ps2-keyboard-spinup -endif -endif -endif -ifeq ($(CONFIG_PAYLOAD_FILO),y) - @printf " PAYLOAD FILO (internal, compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" - $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) -endif - -ifeq ($(CONFIG_PAYLOAD_GRUB2),y) - @printf " PAYLOAD GRUB2 (internal, compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" - $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) -endif - -ifeq ($(CONFIG_PAYLOAD_TIANOCORE),y) - @printf " PAYLOAD Tiano Core (compression: $(CBFS_PAYLOAD_COMPRESS_FLAG))\n" - $(CBFSTOOL) $@.tmp add-payload -f $(CONFIG_PAYLOAD_FILE) -n $(CONFIG_CBFS_PREFIX)/payload -c $(CBFS_PAYLOAD_COMPRESS_FLAG) -endif -ifeq ($(CONFIG_INCLUDE_CONFIG_FILE),y) - @printf " CONFIG $(DOTCONFIG)\n" - if [ -f $(DOTCONFIG) ]; then \ - echo "# This image was built using git revision" `git rev-parse HEAD` > $(obj)/config.tmp ; \ - sed -e '/^#/d' -e '/^ *$$/d' $(DOTCONFIG) >> $(obj)/config.tmp ; \ - $(CBFSTOOL) $@.tmp add -f $(obj)/config.tmp -n config -t raw; rm -f $(obj)/config.tmp ; fi -endif -ifeq ($(CONFIG_VBOOT_VERIFY_FIRMWARE),y) - $(CBFSTOOL) $@.tmp add-stage -f $(VBOOT_STUB) -n $(CONFIG_CBFS_PREFIX)/vboot -c $(CBFS_COMPRESS_FLAG) -endif -ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y) - $(CBFSTOOL) $@.tmp add-stage -f $(CONFIG_REFCODE_BLOB_FILE) -n $(CONFIG_CBFS_PREFIX)/refcode -c $(CBFS_COMPRESS_FLAG) -endif -ifeq ($(CONFIG_PXE_ROM),y) - $(CBFSTOOL) $@.tmp add -f $(CONFIG_PXE_ROM_FILE) -n pci$(CONFIG_PXE_ROM_ID).rom -t raw -endif -ifeq ($(CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE),y) -ifeq ($(CONFIG_CPU_MICROCODE_ADDED_DURING_BUILD),y) - @printf " UPDATE-FIT \n" - $(CBFSTOOL) $@.tmp update-fit -n cpu_microcode_blob.bin -x $(CONFIG_CPU_INTEL_NUM_FIT_ENTRIES) -endif -endif - mv $@.tmp $@ - @printf " CBFSPRINT $(subst $(obj)/,,$(@))\n\n" - $(CBFSTOOL) $@ print - stripped_vgabios_id = $(call strip_quotes,$(CONFIG_VGA_BIOS_ID)) cbfs-files-$(CONFIG_VGA_BIOS) += pci$(stripped_vgabios_id).rom pci$(stripped_vgabios_id).rom-file := $(call strip_quotes,$(CONFIG_VGA_BIOS_FILE)) @@ -173,9 +53,8 @@ cbfs-files-$(CONFIG_INTEL_MBI) += mbi.bin mbi.bin-file := $(call strip_quotes,$(CONFIG_MBI_FILE)) mbi.bin-type := mbi
-cbfs-files-$(CONFIG_BOOTSPLASH) += bootsplash.jpg -bootsplash.jpg-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE)) -bootsplash.jpg-type := bootsplash +CBFSTOOL_PRE1_OPTS = -m x86 -o $$(( $(CONFIG_ROM_SIZE) - $(CONFIG_CBFS_SIZE) )) +CBFSTOOL_PRE_OPTS = -b $(shell cat $(objcbfs)/base_xip.txt)
################################################################################ # i386 specific tools @@ -189,158 +68,11 @@ $(obj)/cmos_layout.bin: $(NVRAMTOOL) $(top)/src/mainboard/$(MAINBOARDDIR)/cmos.l @printf " OPTION $(subst $(obj)/,,$(@))\n" $(NVRAMTOOL) -y $(top)/src/mainboard/$(MAINBOARDDIR)/cmos.layout -L $@
-################################################################################ -# Common recipes for all stages - -$(objcbfs)/%.bin: $(objcbfs)/%.elf - @printf " OBJCOPY $(subst $(obj)/,,$(@))\n" - $(OBJCOPY) -O binary $< $@ - -$(objcbfs)/%.elf: $(objcbfs)/%.debug - @printf " OBJCOPY $(subst $(obj)/,,$(@))\n" - cp $< $@.tmp - $(NM) -n $@.tmp | sort > $(basename $@).map - $(OBJCOPY) --strip-debug $@.tmp - $(OBJCOPY) --add-gnu-debuglink=$< $@.tmp - mv $@.tmp $@
################################################################################ -# Build the ramstage (stage 2) - -ramstage-libs ?= - -ifeq ($(CONFIG_RELOCATABLE_RAMSTAGE),y) - -$(eval $(call rmodule_link,$(objcbfs)/ramstage.debug, $(objgenerated)/ramstage.o, $(CONFIG_HEAP_SIZE))) - -# The rmodule_link defintion creates an elf file with .rmod extension. -$(objcbfs)/ramstage.elf: $(objcbfs)/ramstage.debug.rmod - cp $< $@ - -else - -$(objcbfs)/ramstage.debug: $(objgenerated)/ramstage.o $(src)/arch/x86/ramstage.ld - @printf " CC $(subst $(obj)/,,$(@))\n" -ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) - $(LD) -m elf_i386 -o $@ -L$(obj) $< -T $(src)/arch/x86/ramstage.ld -else - $(CC) -nostdlib -nostartfiles -static -o $@ -L$(obj) -T $(src)/arch/x86/ramstage.ld $< -endif - -endif - -$(objgenerated)/ramstage.o: $$(ramstage-objs) $(LIBGCC_FILE_NAME) $$(ramstage-libs) - @printf " CC $(subst $(obj)/,,$(@))\n" -ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) - $(LD) -m elf_i386 -r -o $@ --wrap __divdi3 --wrap __udivdi3 --wrap __moddi3 --wrap __umoddi3 --start-group $(ramstage-objs) $(ramstage-libs) $(LIBGCC_FILE_NAME) --end-group -else - $(CC) $(CFLAGS) -nostdlib -r -o $@ -Wl,--wrap,__divdi3 -Wl,--wrap,__udivdi3 -Wl,--wrap,__moddi3 -Wl,--wrap,__umoddi3 -Wl,--start-group $(ramstage-objs) $(ramstage-libs) $(LIBGCC_FILE_NAME) -Wl,--end-group -endif - +# Bootblock ################################################################################ -# done - -crt0s = $(src)/arch/x86/init/prologue.inc -ldscripts = -ldscripts += $(src)/arch/x86/init/romstage.ld -crt0s += $(src)/cpu/x86/32bit/entry32.inc -ldscripts += $(src)/cpu/x86/32bit/entry32.lds - -crt0s += $(src)/cpu/x86/fpu_enable.inc -ifeq ($(CONFIG_SSE),y) -crt0s += $(src)/cpu/x86/sse_enable.inc -endif - -crt0s += $(cpu_incs) -crt0s += $(cpu_incs-y) - -crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc - -ifeq ($(CONFIG_ROMCC),y) -crt0s += $(src)/arch/x86/init/crt0_romcc_epilogue.inc -endif - -ifeq ($(CONFIG_ROMCC),y) -ifeq ($(CONFIG_MMX),y) - ifeq ($(CONFIG_SSE),y) - ROMCCFLAGS := -mcpu=p4 -O2 # MMX, SSE - else - ROMCCFLAGS := -mcpu=p2 -O2 # MMX, !SSE - endif -else - ROMCCFLAGS := -mcpu=i386 -O2 # !MMX, !SSE -endif - -$(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(objutil)/romcc/romcc $(OPTION_TABLE_H) $(obj)/build.h $(obj)/config.h - printf " ROMCC romstage.inc\n" - $(ROMCC) -c -S $(ROMCCFLAGS) -D__PRE_RAM__ -I. $(INCLUDES) $< -o $@ -else - -$(obj)/mainboard/$(MAINBOARDDIR)/romstage.pre.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(OPTION_TABLE_H) $(obj)/build.h $(obj)/config.h - @printf " CC romstage.inc\n" - $(CC) -MMD $(CFLAGS) -D__PRE_RAM__ -I$(src) -I. -I$(obj) -c -S $< -o $@
-$(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc: $(obj)/mainboard/$(MAINBOARDDIR)/romstage.pre.inc - @printf " POST romstage.inc\n" - sed -e 's/.rodata/.rom.data/g' -e 's/^.text/.section .rom.text/g' \ - -e 's/^.section .text/.section .rom.text/g' $^ > $@.tmp - mv $@.tmp $@ -endif - -# Things that appear in every board -romstage-srcs += $(objgenerated)/crt0.s -ramstage-srcs += $(wildcard src/mainboard/$(MAINBOARDDIR)/mainboard.c) -ifeq ($(CONFIG_GENERATE_MP_TABLE),y) -ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/mptable.c),) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/mptable.c -endif -endif -ifeq ($(CONFIG_GENERATE_PIRQ_TABLE),y) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/irq_tables.c -endif -ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/reset.c),) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/reset.c -endif -ifeq ($(CONFIG_GENERATE_ACPI_TABLES),y) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/acpi_tables.c -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/dsdt.asl -ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/ssdt2.asl),) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt2.asl -endif -ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/ssdt3.asl),) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt3.asl -endif -ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/ssdt4.asl),) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt4.asl -endif -ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/ssdt5.asl),) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt5.asl -endif -ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/fadt.c),) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/fadt.c -endif -endif -ifeq ($(CONFIG_HAVE_SMI_HANDLER),y) -ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/smihandler.c),) -smm-srcs += src/mainboard/$(MAINBOARDDIR)/smihandler.c -endif -endif -ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/get_bus_conf.c),) -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/get_bus_conf.c -endif - -################################################################################ -# Build the final rom image - -$(obj)/coreboot.pre: $(objcbfs)/romstage_xip.elf $(obj)/coreboot.pre1 $(CBFSTOOL) - @printf " CBFS $(subst $(obj)/,,$(@))\n" - cp $(obj)/coreboot.pre1 $@.tmp - $(CBFSTOOL) $@.tmp add-stage -f $(objcbfs)/romstage_xip.elf \ - -n $(CONFIG_CBFS_PREFIX)/romstage -c none \ - -b $(shell cat $(objcbfs)/base_xip.txt) - mv $@.tmp $@ - -################################################################################ # Build the bootblock
bootblock_lds = $(src)/arch/x86/init/ldscript_failover.lb @@ -404,6 +136,58 @@ else endif
################################################################################ +# Romstage +################################################################################ + +crt0s = $(src)/arch/x86/init/prologue.inc +ldscripts = +ldscripts += $(src)/arch/x86/init/romstage.ld +crt0s += $(src)/cpu/x86/32bit/entry32.inc +ldscripts += $(src)/cpu/x86/32bit/entry32.lds + +crt0s += $(src)/cpu/x86/fpu_enable.inc +ifeq ($(CONFIG_SSE),y) +crt0s += $(src)/cpu/x86/sse_enable.inc +endif + +crt0s += $(cpu_incs) +crt0s += $(cpu_incs-y) + +crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc + +ifeq ($(CONFIG_ROMCC),y) +crt0s += $(src)/arch/x86/init/crt0_romcc_epilogue.inc +endif + +ifeq ($(CONFIG_ROMCC),y) +ifeq ($(CONFIG_MMX),y) + ifeq ($(CONFIG_SSE),y) + ROMCCFLAGS := -mcpu=p4 -O2 # MMX, SSE + else + ROMCCFLAGS := -mcpu=p2 -O2 # MMX, !SSE + endif +else + ROMCCFLAGS := -mcpu=i386 -O2 # !MMX, !SSE +endif + +$(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(objutil)/romcc/romcc $(OPTION_TABLE_H) $(obj)/build.h $(obj)/config.h + printf " ROMCC romstage.inc\n" + $(ROMCC) -c -S $(ROMCCFLAGS) -D__PRE_RAM__ -I. $(INCLUDES) $< -o $@ +else + +$(obj)/mainboard/$(MAINBOARDDIR)/romstage.pre.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(OPTION_TABLE_H) $(obj)/build.h $(obj)/config.h + @printf " CC romstage.inc\n" + $(CC) -MMD $(CFLAGS) -D__PRE_RAM__ -I$(src) -I. -I$(obj) -c -S $< -o $@ + +$(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc: $(obj)/mainboard/$(MAINBOARDDIR)/romstage.pre.inc + @printf " POST romstage.inc\n" + sed -e 's/.rodata/.rom.data/g' -e 's/^.text/.section .rom.text/g' \ + -e 's/^.section .text/.section .rom.text/g' $^ > $@.tmp + mv $@.tmp $@ +endif + +romstage-srcs += $(objgenerated)/crt0.s + # Build the romstage
romstage-libs ?= @@ -460,6 +244,85 @@ $(objgenerated)/crt0.s: $(objgenerated)/crt0.romstage.S $(obj)/config.h $(obj)/b @printf " CC $(subst $(obj)/,,$(@))\n" $(CC) -MMD -x assembler-with-cpp -E -I$(src)/include -I$(src)/arch/x86/include -I$(obj) -include $(obj)/config.h -include $(obj)/build.h -I. -I$(src) $< -o $@
+################################################################################ +# Ramstage +################################################################################ + +ramstage-srcs += $(wildcard src/mainboard/$(MAINBOARDDIR)/mainboard.c) +ifeq ($(CONFIG_GENERATE_MP_TABLE),y) +ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/mptable.c),) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/mptable.c +endif +endif +ifeq ($(CONFIG_GENERATE_PIRQ_TABLE),y) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/irq_tables.c +endif +ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/reset.c),) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/reset.c +endif +ifeq ($(CONFIG_GENERATE_ACPI_TABLES),y) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/acpi_tables.c +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/dsdt.asl +ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/ssdt2.asl),) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt2.asl +endif +ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/ssdt3.asl),) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt3.asl +endif +ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/ssdt4.asl),) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt4.asl +endif +ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/ssdt5.asl),) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/ssdt5.asl +endif +ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/fadt.c),) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/fadt.c +endif +endif +ifeq ($(CONFIG_HAVE_SMI_HANDLER),y) +ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/smihandler.c),) +smm-srcs += src/mainboard/$(MAINBOARDDIR)/smihandler.c +endif +endif +ifneq ($(wildcard src/mainboard/$(MAINBOARDDIR)/get_bus_conf.c),) +ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/get_bus_conf.c +endif + +# Build the ramstage (stage 2) + +ramstage-libs ?= + +ifeq ($(CONFIG_RELOCATABLE_RAMSTAGE),y) + +$(eval $(call rmodule_link,$(objcbfs)/ramstage.debug, $(objgenerated)/ramstage.o, $(CONFIG_HEAP_SIZE))) + +# The rmodule_link defintion creates an elf file with .rmod extension. +$(objcbfs)/ramstage.elf: $(objcbfs)/ramstage.debug.rmod + cp $< $@ + +else + +$(objcbfs)/ramstage.debug: $(objgenerated)/ramstage.o $(src)/arch/x86/ramstage.ld + @printf " CC $(subst $(obj)/,,$(@))\n" +ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) + $(LD) -m elf_i386 -o $@ -L$(obj) $< -T $(src)/arch/x86/ramstage.ld +else + $(CC) -nostdlib -nostartfiles -static -o $@ -L$(obj) -T $(src)/arch/x86/ramstage.ld $< +endif + +endif + +$(objgenerated)/ramstage.o: $$(ramstage-objs) $(LIBGCC_FILE_NAME) $$(ramstage-libs) + @printf " CC $(subst $(obj)/,,$(@))\n" +ifeq ($(CONFIG_COMPILER_LLVM_CLANG),y) + $(LD) -m elf_i386 -r -o $@ --wrap __divdi3 --wrap __udivdi3 --wrap __moddi3 --wrap __umoddi3 --start-group $(ramstage-objs) $(ramstage-libs) $(LIBGCC_FILE_NAME) --end-group +else + $(CC) $(CFLAGS) -nostdlib -r -o $@ -Wl,--wrap,__divdi3 -Wl,--wrap,__udivdi3 -Wl,--wrap,__moddi3 -Wl,--wrap,__umoddi3 -Wl,--start-group $(ramstage-objs) $(ramstage-libs) $(LIBGCC_FILE_NAME) -Wl,--end-group +endif + + +################################################################################ + seabios: $(MAKE) -C payloads/external/SeaBIOS -f Makefile.inc \ HOSTCC="$(HOSTCC)" \