[coreboot-gerrit] Change in ...coreboot[master]: sb/amd/agesa/hudson/Kconfig: Disable XHCI by default, enable only wit...

[mikeb mikeb (Code Review)]

Hello Kyösti Mälkki, Felix Held, Mike Banon, build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/30749

to look at the new patch set (#3).

Change subject: sb/amd/agesa/hudson/Kconfig: Disable XHCI by default, enable only with firmware
......................................................................

sb/amd/agesa/hudson/Kconfig: Disable XHCI by default, enable only with firmware

Currently, by default AGESA's XHCI controller is enabled without XHCI firmware
being added if USE_BLOBS isn't selected. With this faulty set of default values
at least AMD Lenovo G505S laptop has the following problem: both USB 3.0 ports
are not working at all, even at 2.0 mode. To avoid it we should disable XHCI
controller by default and allow enabling it only with a firmware provided.

Signed-off-by: Mike Banon 
Change-Id: I9f2b88d65f4f300ba1a28db09fb41d6bac6252b6
---
M src/southbridge/amd/agesa/hudson/Kconfig
1 file changed, 1 insertion(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/30749/3