[coreboot-gerrit] Change in coreboot[master]: sb/intel/lynxpoint/lpc.c: Correct GPI routing check

[Angel Pons (Code Review)]

Angel Pons has submitted this change. ( https://review.coreboot.org/c/coreboot/+/47044 )

Change subject: sb/intel/lynxpoint/lpc.c: Correct GPI routing check
......................................................................

sb/intel/lynxpoint/lpc.c: Correct GPI routing check

Code does not match comment, but this time the comment is right.

Change-Id: I4e277a802c68c8a4e858b2e33e7ec69b41dd9773
Signed-off-by: Angel Pons 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47044
Reviewed-by: Nico Huber 
Tested-by: build bot (Jenkins) 
---
M src/southbridge/intel/lynxpoint/lpc.c
1 file changed, 1 insertion(+), 1 deletion(-)

Approvals:
  build bot (Jenkins): Verified
  Nico Huber: Looks good to me, approved

diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c
index 2db4b59..4464f91 100644
--- a/src/southbridge/intel/lynxpoint/lpc.c
+++ b/src/southbridge/intel/lynxpoint/lpc.c
@@ -243,7 +243,7 @@
    	 * Set the board's GPI routing on LynxPoint-H.
    	 * This is done as part of GPIO configuration on LynxPoint-LP.
    	 */
-		if (pch_is_lp())
+		if (!pch_is_lp())
    		pch_gpi_routing(dev, config);

/* GPE setup based on device tree configuration */