[coreboot-gerrit] [S] Change in coreboot[main]: mb/starlabs/byte_adl: Disconnect unused GPIOs

[Sean Rhodes (Code Review)]

Sean Rhodes has submitted this change. ( https://review.coreboot.org/c/coreboot/+/86134?usp=email )

Change subject: mb/starlabs/byte_adl: Disconnect unused GPIOs
......................................................................

mb/starlabs/byte_adl: Disconnect unused GPIOs

Change-Id: Ie4c2c32c0740e2ad763881f3f4d5920387f49c79
Signed-off-by: Sean Rhodes 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/86134
Reviewed-by: Matt DeVillier 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/starlabs/byte_adl/variants/mk_ii/gpio.c
1 file changed, 10 insertions(+), 10 deletions(-)

Approvals:
  Matt DeVillier: Looks good to me, approved
  build bot (Jenkins): Verified

diff --git a/src/mainboard/starlabs/byte_adl/variants/mk_ii/gpio.c b/src/mainboard/starlabs/byte_adl/variants/mk_ii/gpio.c
index ecd4082..f17e3ae 100644
--- a/src/mainboard/starlabs/byte_adl/variants/mk_ii/gpio.c
+++ b/src/mainboard/starlabs/byte_adl/variants/mk_ii/gpio.c
@@ -27,11 +27,11 @@
    /* GPD3:	Power Button					*/
    PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1),
    /* GPD4:	Sleep S3					*/
-	PAD_CFG_NF(GPD4, NONE, DEEP, NF1),
+	PAD_NC(GPD4, NONE),
    /* GPD5:	Sleep S4					*/
-	PAD_CFG_NF(GPD5, NONE, DEEP, NF1),
+	PAD_NC(GPD5, NONE),
    /* GPD6:	Sleep A						*/
-	PAD_CFG_NF(GPD6, NONE, DEEP, NF1),
+	PAD_NC(GPD6, NONE),
    /* GPD7:	Power Adapter Disable				*/
    PAD_CFG_GPO(GPD7, 0, PWROK),
    /* GPD8:	Suspend Clock					*/
@@ -39,7 +39,7 @@
    /* GPD9:	Wireless LAN Sleep				*/
    PAD_CFG_NF(GPD9, NONE, DEEP, NF1),
    /* GPD10:	Sleep S5					*/
-	PAD_CFG_NF(GPD10, NONE, DEEP, NF1),
+	PAD_NC(GPD10, NONE),
    /* GPD11:	LAN PHY Enable					*/
    PAD_NC(GPD11, NONE),

@@ -58,7 +58,7 @@
    PAD_NC(GPP_A8, NONE),
    /* A9:		ESPI Clock					*/
    /* A10:		ESPI Reset					*/
-	/* A11:		Not Connected					*/
+	/* A11:		Webcam Camera Reset				*/
    PAD_NC(GPP_A11, NONE),
    /* A12:		PCH M.2 SSD PEDET				*/
    PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
@@ -111,7 +111,7 @@
    /* B11:		I2C PMC PD Interrupt	Test Point 28		*/
    PAD_CFG_NF(GPP_B11, NONE, DEEP, NF1),
    /* B12:		PM SLP S0					*/
-	PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
+	PAD_NC(GPP_B12, NONE),
    /* B13:		PLT RST						*/
    PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
    /* B14:		Top Swap Override	Weak Internal PD 20K
@@ -265,8 +265,8 @@
    PAD_NC(GPP_E11, NONE),
    /* E12:		Touchpad Interrupt				*/
    PAD_NC(GPP_E12, NONE),
-	/* E13:		PWD Amplifier Input				*/
-	PAD_CFG_GPO(GPP_E13, 0, PLTRST),
+	/* E13:		Not connected					*/
+	PAD_NC(GPP_E13, NONE),
    /* E14:		EDP HPD						*/
    PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
    /* E15:		Not Connected		LAN RESET		*/
@@ -342,7 +342,7 @@
    /* H0:		PCH M.2 SSD Reset				*/
    PAD_CFG_GPO_GPIO_DRIVER(GPP_H0, 1, PLTRST, NONE),
    /* H1:		BFX Strap 2 Bit 3	Weak Internal PD 20K	*/
-	PAD_CFG_GPO(GPP_H1, 1, PLTRST),
+	PAD_CFG_GPO(GPP_H1, 0, DEEP),
    /* H2:		Wireless LAN Reset				*/
    PAD_CFG_GPO(GPP_H2, 1, PLTRST),
    /* H3:		Not Connected					*/
@@ -362,7 +362,7 @@
    /* H12:		Not Connected					*/
    PAD_NC(GPP_H12, NONE),
    /* H13:		PCH M.2 SSD Device Sleep			*/
-	PAD_CFG_NF(GPP_H13, NONE, DEEP, NF5),
+	PAD_NC(GPP_H13, NONE),
    /* H14:		Not Connected					*/
    PAD_NC(GPP_H14, NONE),
    /* H15:		DDPB Control Clock				*/