[coreboot-gerrit] Change in coreboot[master]: nb/i945: Remove unneeded whitespaces

[HAOUAS Elyes (Code Review)]

HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36467 )

Change subject: nb/i945: Remove unneeded whitespaces
......................................................................

nb/i945: Remove unneeded whitespaces

Change-Id: Ib1cbb5d466666eff6006d1137525dd5fb0de8e18
Signed-off-by: Elyes HAOUAS 
---
M src/northbridge/intel/i945/raminit.c
1 file changed, 8 insertions(+), 8 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/67/36467/1

diff --git a/src/northbridge/intel/i945/raminit.c b/src/northbridge/intel/i945/raminit.c
index 7096774..27fdf00 100644
--- a/src/northbridge/intel/i945/raminit.c
+++ b/src/northbridge/intel/i945/raminit.c
@@ -816,9 +816,9 @@
    const u8 *slew_group;
    /* Dual Channel needs different tables. */
    if (dual_channel)
-		slew_group   = dual_channel_slew_group_lookup;
+		slew_group = dual_channel_slew_group_lookup;
    else
-		slew_group   = single_channel_slew_group_lookup;
+		slew_group = single_channel_slew_group_lookup;

switch (slew_group[index]) {
    case DQ2030:	return dq2030;
@@ -957,7 +957,7 @@
    	printk(BIOS_DEBUG, "Programming Dual Channel RCOMP\n");
    	strength_multiplier = dual_channel_strength_multiplier;
    	dual_channel = 1;
-		idx = 5 * sysinfo->dimm[0] +  sysinfo->dimm[2];
+		idx = 5 * sysinfo->dimm[0] + sysinfo->dimm[2];
    } else {
    	printk(BIOS_DEBUG, "Programming Single Channel RCOMP\n");
    	strength_multiplier = single_channel_strength_multiplier;
@@ -1209,7 +1209,7 @@
    if (sysinfo->interleaved)
    	tolud = (cum0 + cum1) << 1;
    else
-		tolud = (cum1 ? cum1 : cum0)  << 1;
+		tolud = (cum1 ? cum1 : cum0) << 1;

/* The TOM register has a different format */
    tom = tolud >> 3;
@@ -1349,7 +1349,7 @@
    reg32 |= (1 << 11);
    MCHBAR32(C0DRC1) = reg32;

-	/* Do we have to do this if we're in Single Channel Mode?  */
+	/* Do we have to do this if we're in Single Channel Mode? */
    reg32 = MCHBAR32(C1DRC1);

for (i = 4; i < 8; i++) {
@@ -1706,7 +1706,7 @@

if (voltage == VOLTAGE_1_50) {
    	second_vco = 1;
-	} else if ((i945_silicon_revision() > 0) && (freq == CRCLK_250MHz))  {
+	} else if ((i945_silicon_revision() > 0) && (freq == CRCLK_250MHz)) {
    	u16 mem = sysinfo->memory_frequency;
    	u16 fsb = sysinfo->fsb_frequency;

@@ -2034,7 +2034,7 @@
    u32 chan0 = 0, chan1 = 0;
    int chan0_dualsided, chan1_dualsided, chan0_populated, chan1_populated;

-	chan0_populated =  (sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED ||
+	chan0_populated = (sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED ||
    		sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED);
    chan1_populated = (sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED ||
    		sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED);
@@ -2514,7 +2514,7 @@
 }

#define RTT_ODT_NONE	0
-#define RTT_ODT_50_OHM  ((1 << 9) | (1 << 5))
+#define RTT_ODT_50_OHM	((1 << 9) | (1 << 5))
 #define RTT_ODT_75_OHM	(1 << 5)
 #define RTT_ODT_150_OHM	(1 << 9)