Edward O'Callaghan (eocallaghan@alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8105
-gerrit
commit 421feb623cb05198b08aef09f5a2f11b790a86dd Author: Edward O'Callaghan eocallaghan@alterapraxis.com Date: Tue Jan 6 04:06:44 2015 +1100
cpu/amd/model_10xxx/*: Trivial - Fix indent style
Change-Id: I54df9ed04a5100fe514d15bf82d0b58a3d9668f7 Signed-off-by: Edward O'Callaghan eocallaghan@alterapraxis.com --- src/cpu/amd/model_10xxx/fidvid.c | 512 ++++++++++++++--------------- src/cpu/amd/model_10xxx/model_10xxx_init.c | 1 - 2 files changed, 249 insertions(+), 264 deletions(-)
diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index d3c67a9..8f34ffe 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -146,121 +146,121 @@ static void enable_fid_change(u8 fid) dword |= (u32) fid & 0x1F; dword |= 1 << 5; // enable pci_write_config32(dev, 0xd4, dword); - printk(BIOS_DEBUG, "FID Change Node:%02x, F3xD4: %08x \n", i, - dword); + printk(BIOS_DEBUG, "FID Change Node:%02x, F3xD4: %08x \n", i, dword); } }
static void applyBoostFIDOffset( device_t dev ) { - // BKDG 2.4.2.8 - // revision E only, but E is apparently not supported yet, therefore untested - if ((cpuid_edx(0x80000007) & CPB_MASK) - && ((cpuid_ecx(0x80000008) & NC_MASK) ==5) ) { - u32 core = get_node_core_id_x().coreid; - u32 asymetricBoostThisCore = ((pci_read_config32(dev, 0x10C) >> (core*2))) & 3; - msr_t msr = rdmsr(PS_REG_BASE); - u32 cpuFid = msr.lo & PS_CPU_FID_MASK; - cpuFid = cpuFid + asymetricBoostThisCore; - msr.lo &= ~PS_CPU_FID_MASK; - msr.lo |= cpuFid ; - wrmsr(PS_REG_BASE , msr); - - } + // BKDG 2.4.2.8 + // revision E only, but E is apparently not supported yet, therefore untested + if ((cpuid_edx(0x80000007) & CPB_MASK) && ((cpuid_ecx(0x80000008) & NC_MASK) == 5)) { + u32 core = get_node_core_id_x().coreid; + u32 asymetricBoostThisCore = ((pci_read_config32(dev, 0x10C) >> (core*2))) & 3; + msr_t msr = rdmsr(PS_REG_BASE); + u32 cpuFid = msr.lo & PS_CPU_FID_MASK; + cpuFid = cpuFid + asymetricBoostThisCore; + msr.lo &= ~PS_CPU_FID_MASK; + msr.lo |= cpuFid ; + wrmsr(PS_REG_BASE , msr); + } }
-static void enableNbPState1( device_t dev ) { - u32 cpuRev = mctGetLogicalCPUID(0xFF); - if (cpuRev & AMD_FAM10_C3) { - u32 nbPState = (pci_read_config32(dev, 0x1F0) & NB_PSTATE_MASK); - if ( nbPState){ - u32 nbVid1 = (pci_read_config32(dev, 0x1F4) & NB_VID1_MASK) >> NB_VID1_SHIFT; - u32 i; - for (i = nbPState; i < NM_PS_REG; i++) { - msr_t msr = rdmsr(PS_REG_BASE + i); - if (msr.hi & PS_EN_MASK ) { - msr.hi |= NB_DID_M_ON; - msr.lo &= NB_VID_MASK_OFF; - msr.lo |= ( nbVid1 << NB_VID_POS); - wrmsr(PS_REG_BASE + i, msr); - } - } - } - } +static void enableNbPState1(device_t dev) { + u32 cpuRev = mctGetLogicalCPUID(0xFF); + if (cpuRev & AMD_FAM10_C3) { + u32 nbPState = (pci_read_config32(dev, 0x1F0) & NB_PSTATE_MASK); + if (nbPState) { + u32 nbVid1 = (pci_read_config32(dev, 0x1F4) & NB_VID1_MASK) >> NB_VID1_SHIFT; + u32 i; + for (i = nbPState; i < NM_PS_REG; i++) { + msr_t msr = rdmsr(PS_REG_BASE + i); + if (msr.hi & PS_EN_MASK ) { + msr.hi |= NB_DID_M_ON; + msr.lo &= NB_VID_MASK_OFF; + msr.lo |= ( nbVid1 << NB_VID_POS); + wrmsr(PS_REG_BASE + i, msr); + } + } + } + } }
-static u8 setPStateMaxVal( device_t dev ) { - u8 i,maxpstate=0; - for (i = 0; i < NM_PS_REG; i++) { - msr_t msr = rdmsr(PS_REG_BASE + i); - if (msr.hi & PS_IDD_VALUE_MASK) { - msr.hi |= PS_EN_MASK ; - wrmsr(PS_REG_BASE + i, msr); - } - if (msr.hi & PS_EN_MASK) { - maxpstate = i; - } - } - //FIXME: CPTC2 and HTC_REG should get max per node, not per core ? - u32 reg = pci_read_config32(dev, CPTC2); - reg &= PS_MAX_VAL_MASK; - reg |= (maxpstate << PS_MAX_VAL_POS); - pci_write_config32(dev, CPTC2,reg); - return maxpstate; +static u8 setPStateMaxVal(device_t dev) { + u8 i, maxpstate = 0; + + for (i = 0; i < NM_PS_REG; i++) { + msr_t msr = rdmsr(PS_REG_BASE + i); + if (msr.hi & PS_IDD_VALUE_MASK) { + msr.hi |= PS_EN_MASK ; + wrmsr(PS_REG_BASE + i, msr); + } + if (msr.hi & PS_EN_MASK) { + maxpstate = i; + } + } + + //FIXME: CPTC2 and HTC_REG should get max per node, not per core ? + u32 reg = pci_read_config32(dev, CPTC2); + reg &= PS_MAX_VAL_MASK; + reg |= (maxpstate << PS_MAX_VAL_POS); + pci_write_config32(dev, CPTC2,reg); + + return maxpstate; }
-static void dualPlaneOnly( device_t dev ) { - // BKDG 2.4.2.7 - - u32 cpuRev = mctGetLogicalCPUID(0xFF); - if ((mctGetProcessorPackageType() == AMD_PKGTYPE_AM3_2r2) - && (cpuRev & AMD_DR_Cx)) { // should be rev C or rev E but there's no constant for E - if ( (pci_read_config32(dev, 0x1FC) & DUAL_PLANE_ONLY_MASK) - && (pci_read_config32(dev, 0xA0) & PVI_MODE) ){ - if (cpuid_edx(0x80000007) & CPB_MASK) { - // revision E only, but E is apparently not supported yet, therefore untested - msr_t minPstate = rdmsr(0xC0010065); - wrmsr(0xC0010065, rdmsr(0xC0010068) ); - wrmsr(0xC0010068,minPstate); - } else { - msr_t msr; - msr.lo=0; msr.hi=0; - wrmsr(0xC0010064, rdmsr(0xC0010068) ); - wrmsr(0xC0010068, msr ); - } - - //FIXME: CPTC2 and HTC_REG should get max per node, not per core ? - u8 maxpstate = setPStateMaxVal(dev); - - u32 reg = pci_read_config32(dev, HTC_REG); - reg &= HTC_PS_LMT_MASK; - reg |= (maxpstate << PS_LIMIT_POS); - pci_write_config32(dev, HTC_REG,reg); - - } - } +static void dualPlaneOnly(device_t dev) { +// BKDG 2.4.2.7 + u32 cpuRev = mctGetLogicalCPUID(0xFF); + + // should be rev C or rev E but there's no constant for E + if ((mctGetProcessorPackageType() == AMD_PKGTYPE_AM3_2r2) && (cpuRev & AMD_DR_Cx)) { + if ((pci_read_config32(dev, 0x1FC) & DUAL_PLANE_ONLY_MASK) && (pci_read_config32(dev, 0xA0) & PVI_MODE)) { + if (cpuid_edx(0x80000007) & CPB_MASK) { + // revision E only, but E is apparently not supported yet, therefore untested + msr_t minPstate = rdmsr(0xC0010065); + wrmsr(0xC0010065, rdmsr(0xC0010068)); + wrmsr(0xC0010068,minPstate); + } else { + msr_t msr; + msr.lo=0; + msr.hi=0; + wrmsr(0xC0010064, rdmsr(0xC0010068)); + wrmsr(0xC0010068, msr ); + } + + //FIXME: CPTC2 and HTC_REG should get max per node, not per core ? + u8 maxpstate = setPStateMaxVal(dev); + + u32 reg = pci_read_config32(dev, HTC_REG); + reg &= HTC_PS_LMT_MASK; + reg |= (maxpstate << PS_LIMIT_POS); + pci_write_config32(dev, HTC_REG,reg); + } + } }
static int vidTo100uV(u8 vid) -{// returns voltage corresponding to vid in tenths of mV, i.e. hundreds of uV - // BKDG #31116 rev 3.48 2.4.1.6 - int voltage; - if (vid >= 0x7c) { - voltage = 0; - } else { - voltage = (15500 - (125*vid)); - } - return voltage; +{ + // returns voltage corresponding to vid in tenths of mV, i.e. hundreds of uV + // BKDG #31116 rev 3.48 2.4.1.6 + int voltage; + if (vid >= 0x7c) { + voltage = 0; + } else { + voltage = (15500 - (125*vid)); + } + return voltage; }
static void setVSRamp(device_t dev) { /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSRampTime] - * If this field accepts 8 values between 10 and 500 us why - * does page 324 say "BIOS should set this field to 001b." - * (20 us) ? - * Shouldn't it depend on the voltage regulators, mainboard - * or something ? - */ - u32 dword; + * If this field accepts 8 values between 10 and 500 us why + * does page 324 say "BIOS should set this field to 001b." + * (20 us) ? + * Shouldn't it depend on the voltage regulators, mainboard + * or something ? + */ + u32 dword; dword = pci_read_config32(dev, 0xd8); dword &= VSRAMP_MASK; dword |= VSRAMP_VALUE; @@ -278,12 +278,12 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
/* This function calculates the VsSlamTime using the range of possible * voltages instead of a hardcoded 200us. - * Note: his function is called only from prep_fid_change, - * and that from init_cpus.c finalize_node_setup() - * (after set AMD MSRs and init ht ) + * Note: his function is called only from prep_fid_change, + * and that from init_cpus.c finalize_node_setup() + * (after set AMD MSRs and init ht ) */
- /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSSlamTime] */ + /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSSlamTime] */ /* Calculate Slam Time * Vslam = (mobileCPU?0.2:0.4)us/mV * (Vp0 - (lowest out of Vpmin or Valt)) mV * In our case, we will scale the values by 100 to avoid @@ -299,16 +299,16 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) pviModeFlag = 0;
/* Get P0's voltage */ - /* MSRC001_00[68:64] are not programmed yet when called from - prep_fid_change, one might use F4x1[F0:E0] instead, but - theoretically MSRC001_00[68:64] are equal to them after - reset. */ + /* MSRC001_00[68:64] are not programmed yet when called from + * prep_fid_change, one might use F4x1[F0:E0] instead, but + * theoretically MSRC001_00[68:64] are equal to them after + * reset. + */ msr = rdmsr(0xC0010064); highVoltageVid = (u8) ((msr.lo >> PS_CPU_VID_SHFT) & 0x7F); - if (!(msr.hi & 0x80000000)) { - printk(BIOS_ERR,"P-state info in MSRC001_0064 is invalid !!!\n"); - highVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0) - >> PS_CPU_VID_SHFT) & 0x7F); + if (!(msr.hi & 0x80000000)) { + printk(BIOS_ERR,"P-state info in MSRC001_0064 is invalid !!!\n"); + highVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0) >> PS_CPU_VID_SHFT) & 0x7F); }
/* If SVI, we only care about CPU VID. @@ -336,7 +336,7 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) /* If SVI, we only care about CPU VID. * If PVI, determine the higher voltage b/t NB and CPU * BKDG 2.4.1.7 (a) - */ + */ if (pviModeFlag) { bValue = (u8) ((msr.lo >> PS_NB_VID_SHFT) & 0x7F); if (lowVoltageVid > bValue) @@ -351,7 +351,7 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) if (lowVoltageVid < bValue) lowVoltageVid = bValue;
- u8 mobileFlag = get_platform_type() & AMD_PTYPE_MOB; + u8 mobileFlag = get_platform_type() & AMD_PTYPE_MOB; minimumSlamTime = (mobileFlag?2:4) * (vidTo100uV(highVoltageVid) - vidTo100uV(lowVoltageVid)); /* * 0.01 us */
@@ -372,23 +372,23 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) }
static u32 nb_clk_did(int node, u32 cpuRev,u8 procPkg) { - u8 link0isGen3 = 0; - u8 offset; - if (AMD_CpuFindCapability(node, 0, &offset)) { - link0isGen3 = (AMD_checkLinkType(node, 0, offset) & HTPHY_LINKTYPE_HT3 ); + u8 link0isGen3 = 0; + u8 offset; + + if (AMD_CpuFindCapability(node, 0, &offset)) { + link0isGen3 = (AMD_checkLinkType(node, 0, offset) & HTPHY_LINKTYPE_HT3 ); + } + /* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package + * S1g3 in link Gen3 mode, but I don't know how to tell + * package S1g3 from S1g4 + */ + if ((cpuRev & AMD_DA_C2) && (procPkg & AMD_PKGTYPE_S1gX) && link0isGen3) { + return 5 ; /* divide clk by 128*/ + } else { + return 4 ; /* divide clk by 16 */ } - /* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package - S1g3 in link Gen3 mode, but I don't know how to tell - package S1g3 from S1g4 */ - if ((cpuRev & AMD_DA_C2) && (procPkg & AMD_PKGTYPE_S1gX) - && link0isGen3) { - return 5 ; /* divide clk by 128*/ - } else { - return 4 ; /* divide clk by 16 */ - } }
- static u32 power_up_down(int node, u8 procPkg) { u32 dword=0; /* from CPU rev guide #41322 rev 3.74 June 2010 Table 26 */ @@ -504,83 +504,79 @@ static void config_nb_syn_ptr_adj(device_t dev, u32 cpuRev) { /* Note the following settings are additional from the ported * function setFidVidRegs() */ - /* adjust FIFO between nb and core clocks to max allowed - values (min latency) */ + /* adjust FIFO between nb and core clocks to max allowed values (min latency) */ u32 nbPstate = pci_read_config32(dev,0x1f0) & NB_PSTATE_MASK; - u8 nbSynPtrAdj; - if ((cpuRev & (AMD_DR_Bx|AMD_DA_Cx) ) - || ( (cpuRev & AMD_RB_C3) && (nbPstate!=0))) { - nbSynPtrAdj = 5; + u8 nbSynPtrAdj; + + if ((cpuRev & (AMD_DR_Bx|AMD_DA_Cx)) || ((cpuRev & AMD_RB_C3) && (nbPstate!=0))) { + nbSynPtrAdj = 5; } else { - nbSynPtrAdj = 6; + nbSynPtrAdj = 6; }
u32 dword = pci_read_config32(dev, 0xDc); - dword &= ~ NB_SYN_PTR_ADJ_MASK; + dword &= ~ NB_SYN_PTR_ADJ_MASK; dword |= nbSynPtrAdj << NB_SYN_PTR_ADJ_POS; - /* NbsynPtrAdj set to 5 or 6 per BKDG (needs reset) */ + /* NbsynPtrAdj set to 5 or 6 per BKDG (needs reset) */ pci_write_config32(dev, 0xdc, dword); }
static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg) { - /* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */ - u32 dword; - u32 c1= 1; - if (cpuRev & (AMD_DR_Bx)) { - // will coreboot ever enable cache scrubbing ? - // if it does, will it be enough to check the current state - // or should we configure for what we'll set up later ? - dword = pci_read_config32(dev, 0x58); - u32 scrubbingCache = dword & - ( (0x1F << 16) // DCacheScrub - | (0x1F << 8) ); // L2Scrub - if (scrubbingCache) { - c1 = 0x80; - } else { - c1 = 0xA0; - } + /* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */ + u32 dword; + u32 c1 = 1; + if (cpuRev & (AMD_DR_Bx)) { + // will coreboot ever enable cache scrubbing ? + // if it does, will it be enough to check the current state + // or should we configure for what we'll set up later ? + dword = pci_read_config32(dev, 0x58); + u32 scrubbingCache = dword & ((0x1F << 16) /* DCacheScrub */ | (0x1F << 8)); /* L2Scrub */ + if (scrubbingCache) { + c1 = 0x80; + } else { + c1 = 0xA0; + } } else { // rev C or later - // same doubt as cache scrubbing: ok to check current state ? - dword = pci_read_config32(dev, 0xDC); - u32 cacheFlushOnHalt = dword & (7 << 16); - if (!cacheFlushOnHalt) { - c1 = 0x80; - } - } - dword = (c1 << 24) | (0xE641E6); + // same doubt as cache scrubbing: ok to check current state ? + dword = pci_read_config32(dev, 0xDC); + u32 cacheFlushOnHalt = dword & (7 << 16); + if (!cacheFlushOnHalt) { + c1 = 0x80; + } + } + dword = (c1 << 24) | (0xE641E6); pci_write_config32(dev, 0x84, dword);
- /* FIXME: BKDG Table 100 says if the link is at a Gen1 -frequency and the chipset does not support a 10us minimum LDTSTOP -assertion time, then { If ASB2 && SVI then smaf001 = F6h else -smaf001=87h. } else ... I hardly know what it means or how to check -it from here, so I bluntly assume it is false and code here the else, -which is easier */ - - u32 smaf001 = 0xE6; - if (cpuRev & AMD_DR_Bx ) { - smaf001 = 0xA6; - } else { - #if CONFIG_SVI_HIGH_FREQ - if (cpuRev & (AMD_RB_C3 | AMD_DA_C3)) { - smaf001 = 0xF6; +/* FIXME: BKDG Table 100 says if the link is at a Gen1 + * frequency and the chipset does not support a 10us minimum LDTSTOP + * assertion time, then { If ASB2 && SVI then smaf001 = F6h else + * smaf001=87h. } else ... I hardly know what it means or how to check + * it from here, so I bluntly assume it is false and code here the else, + * which is easier + */ + + u32 smaf001 = 0xE6; + if (cpuRev & AMD_DR_Bx ) { + smaf001 = 0xA6; + } else { +#if CONFIG_SVI_HIGH_FREQ + if (cpuRev & (AMD_RB_C3 | AMD_DA_C3)) { + smaf001 = 0xF6; } - #endif - } - u32 fidvidChange = 0; - if (((cpuRev & AMD_DA_Cx) && (procPkg & AMD_PKGTYPE_S1gX)) - || (cpuRev & AMD_RB_C3) ) { - fidvidChange=0x0B; - } - dword = (0xE6 << 24) | (fidvidChange << 16) - | (smaf001 << 8) | 0x81; +#endif + } + u32 fidvidChange = 0; + if (((cpuRev & AMD_DA_Cx) && (procPkg & AMD_PKGTYPE_S1gX)) || (cpuRev & AMD_RB_C3) ) { + fidvidChange = 0x0B; + } + dword = (0xE6 << 24) | (fidvidChange << 16) | (smaf001 << 8) | 0x81; pci_write_config32(dev, 0x80, dword); }
static void prep_fid_change(void) { - u32 dword; + u32 dword; u32 nodes; device_t dev; int i; @@ -592,20 +588,20 @@ static void prep_fid_change(void) for (i = 0; i < nodes; i++) { printk(BIOS_DEBUG, "Prep FID/VID Node:%02x \n", i); dev = NODE_PCI(i, 3); - u32 cpuRev = mctGetLogicalCPUID(0xFF) ; - u8 procPkg = mctGetProcessorPackageType(); + u32 cpuRev = mctGetLogicalCPUID(0xFF) ; + u8 procPkg = mctGetProcessorPackageType();
setVSRamp(dev); /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSSlamTime] */ /* Figure out the value for VsSlamTime and program it */ recalculateVsSlamTimeSettingOnCorePre(dev);
- config_clk_power_ctrl_reg0(i,cpuRev,procPkg); + config_clk_power_ctrl_reg0(i,cpuRev,procPkg);
- config_power_ctrl_misc_reg(dev,cpuRev,procPkg); + config_power_ctrl_misc_reg(dev,cpuRev,procPkg); config_nb_syn_ptr_adj(dev,cpuRev);
- config_acpi_pwr_state_ctrl_regs(dev,cpuRev,procPkg); + config_acpi_pwr_state_ctrl_regs(dev,cpuRev,procPkg);
dword = pci_read_config32(dev, 0x80); printk(BIOS_DEBUG, " F3x80: %08x \n", dword); @@ -617,54 +613,51 @@ static void prep_fid_change(void) printk(BIOS_DEBUG, " F3xD8: %08x \n", dword); dword = pci_read_config32(dev, 0xDC); printk(BIOS_DEBUG, " F3xDC: %08x \n", dword); - - } }
static void waitCurrentPstate(u32 target_pstate){ - msr_t initial_msr = rdmsr(TSC_MSR); - msr_t pstate_msr = rdmsr(CUR_PSTATE_MSR); - msr_t tsc_msr; - u8 timedout ; - - /* paranoia ? I fear when we run fixPsNbVidBeforeWR we can enter a - * P1 that is a copy of P0, therefore has the same NB DID but the - * TSC will count twice per tick, so we have to wait for twice the - * count to achieve the desired timeout. But I'm likely to - * misunderstand this... - */ - u32 corrected_timeout = ( (pstate_msr.lo==1) - && (!(rdmsr(0xC0010065).lo & NB_DID_M_ON)) ) ? - WAIT_PSTATE_TIMEOUT*2 : WAIT_PSTATE_TIMEOUT ; - msr_t timeout; - - timeout.lo = initial_msr.lo + corrected_timeout ; - timeout.hi = initial_msr.hi; - if ( (((u32)0xffffffff) - initial_msr.lo) < corrected_timeout ) { - timeout.hi++; - } - - // assuming TSC ticks at 1.25 ns per tick (800 MHz) - do { - pstate_msr = rdmsr(CUR_PSTATE_MSR); - tsc_msr = rdmsr(TSC_MSR); - timedout = (tsc_msr.hi > timeout.hi) - || ((tsc_msr.hi == timeout.hi) && (tsc_msr.lo > timeout.lo )); - } while ( (pstate_msr.lo != target_pstate) && (! timedout) ) ; - - if (pstate_msr.lo != target_pstate) { - msr_t limit_msr = rdmsr(0xc0010061); - printk(BIOS_ERR, "*** Time out waiting for P-state %01x. Current P-state %01x P-state current limit MSRC001_0061=%02x\n", target_pstate, pstate_msr.lo, limit_msr.lo); - - do { // should we just go on instead ? - pstate_msr = rdmsr(CUR_PSTATE_MSR); - } while ( pstate_msr.lo != target_pstate ) ; - } + msr_t initial_msr = rdmsr(TSC_MSR); + msr_t pstate_msr = rdmsr(CUR_PSTATE_MSR); + msr_t tsc_msr; + msr_t timeout; + u8 timedout; + + /* paranoia ? I fear when we run fixPsNbVidBeforeWR we can enter a + * P1 that is a copy of P0, therefore has the same NB DID but the + * TSC will count twice per tick, so we have to wait for twice the + * count to achieve the desired timeout. But I'm likely to + * misunderstand this... + */ + u32 corrected_timeout = ((pstate_msr.lo==1) + && (!(rdmsr(0xC0010065).lo & NB_DID_M_ON)) ) ? WAIT_PSTATE_TIMEOUT*2 : WAIT_PSTATE_TIMEOUT; + + timeout.lo = initial_msr.lo + corrected_timeout ; + timeout.hi = initial_msr.hi; + if ( (((u32)0xffffffff) - initial_msr.lo) < corrected_timeout ) { + timeout.hi++; + } + + // assuming TSC ticks at 1.25 ns per tick (800 MHz) + do { + pstate_msr = rdmsr(CUR_PSTATE_MSR); + tsc_msr = rdmsr(TSC_MSR); + timedout = (tsc_msr.hi > timeout.hi) || ((tsc_msr.hi == timeout.hi) && (tsc_msr.lo > timeout.lo)); + } while ( (pstate_msr.lo != target_pstate) && (! timedout) ) ; + + if (pstate_msr.lo != target_pstate) { + msr_t limit_msr = rdmsr(0xc0010061); + printk(BIOS_ERR, "*** Time out waiting for P-state %01x. Current P-state %01x P-state current limit MSRC001_0061=%02x\n", target_pstate, pstate_msr.lo, limit_msr.lo); + + do { // should we just go on instead ? + pstate_msr = rdmsr(CUR_PSTATE_MSR); + } while ( pstate_msr.lo != target_pstate ) ; + } }
-static void set_pstate(u32 nonBoostedPState) { - msr_t msr; +static void set_pstate(u32 nonBoostedPState) +{ + msr_t msr;
// Transition P0 for calling core. msr = rdmsr(0xC0010062); @@ -673,12 +666,9 @@ static void set_pstate(u32 nonBoostedPState) { wrmsr(0xC0010062, msr);
/* Wait for P0 to set. */ - waitCurrentPstate(nonBoostedPState); + waitCurrentPstate(nonBoostedPState); }
- - - static void UpdateSinglePlaneNbVid(void) { u32 nbVid, cpuVid; @@ -704,23 +694,23 @@ static void UpdateSinglePlaneNbVid(void) }
static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode) - { - msr_t msr; - u8 startup_pstate; +{ + msr_t msr; + u8 startup_pstate;
- /* This function sets NbVid before the warm reset. - * Get StartupPstate from MSRC001_0071. + /* This function sets NbVid before the warm reset. + * Get StartupPstate from MSRC001_0071. * Read Pstate register pointed by [StartupPstate]. - * and copy its content to P0 and P1 registers. - * Copy newNbVid to P0[NbVid]. - * transition to P1 on all cores, - * then transition to P0 on core 0. - * Wait for MSRC001_0063[CurPstate] = 000b on core 0. - * see BKDG rev 3.48 2.4.2.9.1 BIOS NB COF and VID Configuration - * for SVI and Single-Plane PVI Systems - */ - - msr = rdmsr(0xc0010071); + * and copy its content to P0 and P1 registers. + * Copy newNbVid to P0[NbVid]. + * transition to P1 on all cores, + * then transition to P0 on core 0. + * Wait for MSRC001_0063[CurPstate] = 000b on core 0. + * see BKDG rev 3.48 2.4.2.9.1 BIOS NB COF and VID Configuration + * for SVI and Single-Plane PVI Systems + */ + + msr = rdmsr(0xc0010071); startup_pstate = (msr.hi >> (32 - 32)) & 0x07;
/* Copy startup pstate to P1 and P0 MSRs. Set the maxvid for @@ -731,13 +721,13 @@ static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode) wrmsr(0xC0010065, msr); wrmsr(0xC0010064, msr);
- /* missing step 2 from BDKG , F3xDC[PstateMaxVal] = - * max(1,F3xDC[PstateMaxVal] ) because it would take - * synchronization between cores and we don't think - * PstatMaxVal is going to be 0 on cold reset anyway ? + /* missing step 2 from BDKG , F3xDC[PstateMaxVal] = + * max(1,F3xDC[PstateMaxVal] ) because it would take + * synchronization between cores and we don't think + * PstatMaxVal is going to be 0 on cold reset anyway ? */ - if ( ! (pci_read_config32(dev, 0xDC) & (~ PS_MAX_VAL_MASK)) ) { - printk(BIOS_ERR,"F3xDC[PstateMaxVal] is zero. Northbridge voltage setting will fail. fixPsNbVidBeforeWR in fidvid.c needs fixing. See AMD # 31116 rev 3.48 BKDG 2.4.2.9.1 \n"); + if ( ! (pci_read_config32(dev, 0xDC) & (~ PS_MAX_VAL_MASK)) ) { + printk(BIOS_ERR,"F3xDC[PstateMaxVal] is zero. Northbridge voltage setting will fail. fixPsNbVidBeforeWR in fidvid.c needs fixing. See AMD # 31116 rev 3.48 BKDG 2.4.2.9.1 \n"); };
msr.lo &= ~0xFE000000; // clear nbvid @@ -753,12 +743,11 @@ static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode)
if (coreid == 0) { set_pstate(0); - } + }
/* missing step 7 (restore PstateMax to 0 if needed) because * we skipped step 2 */ - }
static u32 needs_NB_COF_VID_update(void) @@ -888,7 +877,6 @@ static void init_fidvid_bsp_stage1(u32 ap_apicid, void *gp) fvp->common_fid = calc_common_fid(fvp->common_fid, readback);
print_debug_fv("\tcommon_fid(packed) = ", fvp->common_fid); - }
static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode) @@ -930,7 +918,6 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode)
/* Set and wait for StartupPstate to set. */ set_pstate(StartupPstate); - }
static void finalPstateChange(void) @@ -979,9 +966,9 @@ static void init_fidvid_stage2(u32 apicid, u32 nodeid) dtemp |= PLLLOCK_DFT_L; pci_write_config32(dev, 0xA0, dtemp);
- dualPlaneOnly(dev); - applyBoostFIDOffset(dev); - enableNbPState1(dev); + dualPlaneOnly(dev); + applyBoostFIDOffset(dev); + enableNbPState1(dev);
finalPstateChange();
@@ -1002,7 +989,6 @@ struct ap_apicid_st { static void store_ap_apicid(unsigned ap_apicid, void *gp) { struct ap_apicid_st *p = gp; - p->apicid[p->num++] = ap_apicid;
} diff --git a/src/cpu/amd/model_10xxx/model_10xxx_init.c b/src/cpu/amd/model_10xxx/model_10xxx_init.c index c6cf64a..453684a 100644 --- a/src/cpu/amd/model_10xxx/model_10xxx_init.c +++ b/src/cpu/amd/model_10xxx/model_10xxx_init.c @@ -113,7 +113,6 @@ static void model_10xxx_init(device_t dev) msr = rdmsr(HWCR_MSR); msr.lo |= (1 << 0); wrmsr(HWCR_MSR, msr); - }
static struct device_operations cpu_dev_ops = {