[coreboot-gerrit] Change in ...coreboot[master]: mb/google/hatch: Configure GPIO pad for non-inversion

[Aamir Bohra (Code Review)]

Hello Rajat Jain, Subrata Banik, Paul Menzel, Rizwan Qureshi, Shelley Chen, build bot (Jenkins), Furquan Shaikh,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/31328

to look at the new patch set (#5).

Change subject: mb/google/hatch: Configure GPIO pad for non-inversion
......................................................................

mb/google/hatch: Configure GPIO pad for non-inversion

This implementation configures GPIO (GPP_A21, GPP_C21, GPP_D16)
pad in non-inversion mode i.e Rx PAD state is not inverted as
it is sent from GPIO to IOAPIC.

BUG=b:123315212
TEST=Tested for below:
     -> Verify touchpad is working fine.
     -> TPM init is successful and boot with fixed boot media.

Change-Id: I6034fd07ccc96a19218d57ef8bb9049c4b963ea5
Signed-off-by: Aamir Bohra 
---
M src/mainboard/google/hatch/variants/baseboard/gpio.c
1 file changed, 24 insertions(+), 8 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/28/31328/5