[coreboot-gerrit] Change in coreboot[master]: vendorcode/intel/fsp/fsp2_0: Add FSP header files for Skylake-SP

[Jonathan Zhang (Code Review)]

Hello Anjaneya "Reddy" Chagam,

I'd like you to do a code review. Please visit

https://review.coreboot.org/c/coreboot/+/39108

to review the following change.

Change subject: vendorcode/intel/fsp/fsp2_0: Add FSP header files for Skylake-SP
......................................................................

vendorcode/intel/fsp/fsp2_0: Add FSP header files for Skylake-SP

Add header files for FSP of Skylake Scalable Processor.

These header files are from an Intel engineering build.

Signed-off-by: Jonathan Zhang 
Signed-off-by: Reddy Chagam 
Tested-by: [e-mail]
Change-Id: If47f102c2c7979da1196f8c6b315d5be558e786c
---
A src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspUpd.h
A src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspmUpd.h
A src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspsUpd.h
A src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FsptUpd.h
A src/vendorcode/intel/fsp/fsp2_0/skylake_sp/hob_iiouds.h
A src/vendorcode/intel/fsp/fsp2_0/skylake_sp/hob_memmap.h
6 files changed, 1,264 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/08/39108/1

diff --git a/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspUpd.h
new file mode 100644
index 0000000..daa0bb4
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspUpd.h
@@ -0,0 +1,48 @@
+/** @file
+
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or
+  other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+  be used to endorse or promote products derived from this software without
+  specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.
+
+  This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPUPD_H__
+#define __FSPUPD_H__
+
+#include <FspEas.h>
+
+#pragma pack(1)
+
+#define FSPT_UPD_SIGNATURE               0x545F4450554C4E41        /* 'ANLUPD_T' */
+
+#define FSPM_UPD_SIGNATURE               0x4D5F4450554C4E41        /* 'ANLUPD_M' */
+
+#define FSPS_UPD_SIGNATURE               0x535F4450554C4E41        /* 'ANLUPD_S' */
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspmUpd.h
new file mode 100644
index 0000000..80ca157
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspmUpd.h
@@ -0,0 +1,545 @@
+/** @file
+
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or
+  other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+  be used to endorse or promote products derived from this software without
+  specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.
+
+  This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPMUPD_H__
+#define __FSPMUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+/**
+ FSP Header Version Number
+**/
+#define FSP_UPD_VERSION (0x1947)
+
+#define MAX_CHANNEL               6     /* Maximum Number of Memory Channels    */
+#define MAX_DIMM                  2     /* Maximum Number of DIMMs per Channel  */
+
+/**
+ IIO PCIe Ports
+ **/
+typedef enum {
+	PORT_0 = 0,
+	// IOU2
+	PORT_1A,
+	PORT_1B,
+	PORT_1C,
+	PORT_1D,
+	// IOU0
+	PORT_2A,
+	PORT_2B,
+	PORT_2C,
+	PORT_2D,
+	// IOU1
+	PORT_3A,
+	PORT_3B,
+	PORT_3C,
+	PORT_3D,
+	// MCP0
+	PORT_4A,
+	PORT_4B,
+	PORT_4C,
+	PORT_4D,
+	// MCP1
+	PORT_5A,
+	PORT_5B,
+	PORT_5C,
+	PORT_5D,
+	MAX_PORTS
+} PCIE_PORTS;
+
+/**
+ IIO Stacks
+ **/
+typedef enum {
+	CSTACK = 0,
+	PSTACK0,
+	PSTACK1,
+	PSTACK2,
+	PSTACK3,
+	PSTACK4,
+	MAX_STACKS
+} IIO_STACKS;
+
+/**
+ NTB Per Port Definition
+ **/
+typedef enum {
+	NTB_PORT_TRANSPARENT = 0,
+	NTB_PORT_NTB_NTB
+} NTB_PPD;
+
+/**
+ NTB Upstream/Downstream Configuration
+ **/
+typedef enum {
+	NTB_XLINK_DSD_USP = 2,
+	NTB_XLINK_USD_DSP
+} NTB_XLINK;
+
+/**
+ PCIe Link Speed Selection
+ **/
+typedef enum {
+	PcieAuto = 0,
+	PcieGen1,
+	PcieGen2,
+	PcieGen3
+} PCIE_LINK_SPEED;
+
+/**
+ GPIO Pad Number
+**/
+
+typedef UINT32 UPD_GPIO_PAD;
+
+/**
+ UPD_GPIO_CONFIG:
+ 64 bit struct defining GPIO PAD configuration
+**/
+typedef struct {
+	/**
+	Pad Mode
+	Pad can be set as GPIO or one of its native functions.
+	When in native mode setting Direction (except Inversion), OutputState,
+	InterruptConfig and Host Software Pad Ownership are unnecessary.
+	Refer to definition of GPIO_PAD_MODE.
+	Refer to EDS for each native mode according to the pad.
+	**/
+	UINT32 PadMode            : 4;
+	/**
+	Host Software Pad Ownership
+	Set pad to ACPI mode or GPIO Driver Mode.
+	Refer to definition of GPIO_HOSTSW_OWN.
+	**/
+	UINT32 HostSoftPadOwn     : 2;
+	/**
+	GPIO Direction
+	Can choose between In, In with inversion Out, both In and Out,
+		both In with inversion and out or disabling both.
+	Refer to definition of GPIO_DIRECTION for supported settings.
+	**/
+	UINT32 Direction           : 5;
+	/**
+	Output State
+	Set Pad output value.
+	Refer to definition of GPIO_OUTPUT_STATE for supported settings.
+	This setting takes place when output is enabled.
+	**/
+	UINT32 OutputState         : 2;
+	/**
+	GPIO Interrupt Configuration
+	Set Pad to cause one of interrupts (IOxAPIC/SCI/SMI/NMI). This setting
+		is applicable only if GPIO is in input mode.
+	If GPIO is set to cause an SCI then also Gpe is enabled for this pad.
+	Refer to definition of GPIO_INT_CONFIG for supported settings.
+	**/
+	UINT32 InterruptConfig     : 8;
+	/**
+	GPIO Power Configuration.
+	This setting controls Pad Reset Configuration.
+	Refer to definition of GPIO_RESET_CONFIG for supported settings.
+	**/
+	UINT32 PowerConfig        : 4;
+
+	/**
+	GPIO Electrical Configuration
+	This setting controls pads termination and voltage tolerance.
+	Refer to definition of GPIO_ELECTRICAL_CONFIG for supported settings.
+	**/
+	UINT32 ElectricalConfig   : 7;
+
+	/**
+	GPIO Lock Configuration
+	This setting controls pads lock.
+	Refer to definition of GPIO_LOCK_CONFIG for supported settings.
+	**/
+	UINT32 LockConfig         : 3;
+	/**
+	Additional GPIO configuration
+	Refer to definition of GPIO_OTHER_CONFIG for supported settings.
+	**/
+	UINT32 OtherSettings     :  2;
+
+	UINT32 RsvdBits          : 27;    ///< Reserved bits for future extension
+
+	UINT32 RsvdBits1;                 ///< Reserved bits for future extension
+} UPD_GPIO_CONFIG;
+
+/**
+ UPD_GPIO_INIT_CONFIG:
+ Defines a GPIO Pad and its respective configuration
+ Constitutes one entry in the GPIO config table
+ Reference FSP implementation:
+ AndersonLakePlatPkg\Uba\UbaMain\Pei\TypeAndersonCreek\GpioTable.c
+ Bootloaders can include the following to define GPIO PADs/other macros:
+ PurleySktPkg\SouthClusterLbg\Include\Library\GpioLib.h
+**/
+typedef struct {
+	UPD_GPIO_PAD        GpioPad;
+	UPD_GPIO_CONFIG     GpioConfig;
+} UPD_GPIO_INIT_CONFIG;
+
+/**
+ GPIOTABLE_CONFIG:
+ GpioTable -       Base Address of the Gpio Table declared by the
+		bootloader.
+		Default: NULL
+ NumberofEntries - Number of Entries in the GPIO Table provided
+		Default: 0
+ If GpioTable is Null or NumberofEntries is 0, then FSP will handle Gpio Pad
+ configuration using default GPIO_INIT_CONFIG tables
+**/
+typedef struct {
+	UPD_GPIO_INIT_CONFIG  *GpioTable;
+	UINT32                NumberOfEntries;
+} GPIOTABLE_CONFIG;
+
+/**
+ UPD_IIO_BIFURCATION_DATA_ENTRY:
+ Defines IIO Bifurcation for IIO Units
+ Constitutes one entry in the IIO Bifurcation table, describing bifurcation entries as:
+ Socket | IOU | Bifurcation
+ Valid IouNumbers are from 0 to 4
+ Reference FSP Implementation :
+ AndersonLakePlatPkg\Uba\UbaMain\Pei\TypeAndersonCreek\IioBifurInit.c
+ Definitions for relevant bifurcation macros:
+ NumberCpRcPkg\Library\BaseMemoryCoreLib\Chip\Skx\Include\Iio\IioRegs.h
+**/
+typedef struct {
+	UINT8 Socket;
+	UINT8 IouNumber;
+	UINT8 Bifurcation;
+} UPD_IIO_BIFURCATION_DATA_ENTRY;
+
+/**
+ IIOBIFURCATION_CONFIG:
+ IIoBifurcationTable - Base Address of the IIO Bifurcation table
+		declared by the bootloader
+		Default: NULL
+ NumberofEntries -     Number of Entries in the IIO Bifurcation Table
+		Default: 0
+ If IIoBifurcationTable is Null or NumberofEntries is 0, then FSP will handle IIO
+ bifurcation using default IIO_BIFURCATION_DATA_ENTRY tables
+**/
+typedef struct {
+	UPD_IIO_BIFURCATION_DATA_ENTRY  *IIoBifurcationTable;
+	UINT32                          NumberOfEntries;
+} IIOBIFURCATION_CONFIG;
+
+/**
+ VTD_CONFIG :
+ VT direct IO Configuration Support
+ VTdSupport       - Enable/Disable VTd Support
+ CoherencySupport - Enable/Disable Coherency Support
+ ATS              - Enable/Disable Address Translation Services
+ FSP Will Disable VTd by default
+**/
+typedef struct {
+	UINT8 VTdSupport;
+	UINT8 CoherencySupport;
+	UINT8 ATS;
+} VTD_CONFIG;
+
+/**
+ UPD_PCIE_PORT_CONFIG
+ PCIe port configuration
+ PortIndex           - Index of the port to be configured as defined by PCI_PORTS
+ HidePort            - Hide the selected port
+ DeEmphasis          - DeEmphasis of the selected PCIe port
+ PortLinkSpeed       - Port Link Speed. Use PCIE_LINK_SPEED to set
+ DfxDnTxPreset       - PCIe Downstream Tx Preset, valid values (0x00 - 0x09,
+		0xFF is Auto, Auto sets 0x07)
+ DfxRxPreset         - PCIe Downstream Rx Preset, valid values (0x00 - 0x06, 0xFF is Auto)
+ DfxUpTxPreset       - PCIe Upstream Tx Preset, valid values (0x00 - 0x09, 0xFF is Auto)
+ Sris                - Enable/Disable SRIS (0x00 - Disable, 0x01 - Enable)
+ PcieCommonClock     - Configure port clocking. (0x00 - Distinct, 0x01 - Common)
+ MaxPayload          - PCIe Max Payload Size on the port
+ NtbPpd              - NTB port Configuration as defined in NTB_PPD
+ NtbSplitBar         - 0: Use one 64, 1: Use two 32-bit split bars
+ NtbSBar01Prefetch   - Configure Split BAR 0/1 as prefetchable
+ NtbXlinkCtlOverride - NTB Cross-link as defined in NTB_XLINK
+ NtbBarSizePBar4     - Set Prefetchable BAR 4 size for the primary NTB side in case
+		Split Bar is Enabled
+ NtbBarSizePBar5     - Set Prefetchable BAR 5 size for the primary NTB side in case
+		Split Bar is Enabled
+ FSP_WA: Till FSP fixes NtbBarSizeOverride, parameters below are MANDATORY!:
+ These BAR size registers are write once registers and will be programmed with 0
+		if not passed as FSP is
+ hardcoding NtbBarSizeOverride to 0x01 for now.
+ Split BAR sizes would need to be programmed mandatorily as well in case split bars
+		are enabled.
+	NtbBarSizePBar23    - Set Prefetchable BAR 23 size for the primary NTB side
+	NtbBarSizePBar45    - Used to set bar 4 and 5 sizes in case Split Bar is Disabled
+	NtbBarSizeSBar23    - Set Prefetchable BAR 23 size for the secondary NTB side
+	NtbBarSizeSBar45    - Set Prefetchable BAR 45 size for the secondary NTB side in case
+		Split Bar is disabled
+**/
+typedef struct {
+	UINT32  PortIndex;
+	UINT8   HidePort;
+	UINT8   DeEmphasis;
+	UINT8   PortLinkSpeed;
+	UINT8   MaxPayload;
+	UINT8   DfxDnTxPreset;
+	UINT8   DfxRxPreset;
+	UINT8   DfxUpTxPreset;
+	UINT8   Sris;
+	UINT8   PcieCommonClock;
+	UINT8   NtbPpd;
+	UINT8   NtbSplitBar;
+	UINT8   NtbBarSizePBar23;
+	UINT8   NtbBarSizePBar4;
+	UINT8   NtbBarSizePBar5;
+	UINT8   NtbBarSizePBar45;
+	UINT8   NtbBarSizeSBar23;
+	UINT8   NtbBarSizeSBar4;
+	UINT8   NtbBarSizeSBar5;
+	UINT8   NtbBarSizeSBar45;
+	UINT8   NtbSBar01Prefetch;
+	UINT8   NtbXlinkCtlOverride;
+} UPD_PCI_PORT_CONFIG;
+
+/**
+ PCIEPORT_CONFIG:
+ PciePortConfiguration - Pointer to an array of PCIe port configuration structures
+	as declared above
+ NumberOfEntries       - Number of elements in the PciePortConfiguration Array
+**/
+typedef struct {
+	UPD_PCI_PORT_CONFIG  *ConfigurationTable;
+
+	UINT16                NumberOfEntries;
+} IIOPCIPORT_CONFIG;
+
+/**
+ UPD_IIO_STACK_RESOURCE_CONFIG:
+ StackIndex             - Index of the CPU IIO Stack to be configured as defined by IIO_STACKS
+ PciResourceIoBase
+ PciResourceIoLimit
+ PciResourceMem32Base
+ PciResourceMem32Limit
+ PciResourceMem64Base
+ PciResourceMem64Limit
+**/
+typedef struct {
+	UINT8   StackIndex;
+	UINT16  PciResourceIoBase;
+	UINT16  PciResourceIoLimit;
+	UINT32  PciResourceMem32Base;
+	UINT32  PciResourceMem32Limit;
+	UINT64  PciResourceMem64Base;
+	UINT64  PciResourceMem64Limit;
+} UPD_IIO_STACK_RESOURCE_CONFIG;
+
+/**
+ IIORESOURCE_CONFIG:
+ ResourceConfigTable   - Pointer to an Iio Stack Resource Configuration Structure Array
+ NumberOfEntries       - Number of Entries in the Iio Stack Resource Configuration Array
+**/
+typedef struct {
+	UPD_IIO_STACK_RESOURCE_CONFIG  *ResourceTable;
+	UINT16                         NumberOfEntries;
+} IIORESOURCE_CONFIG;
+
+/**
+ UPD_PCH_PCIE_PORT:
+ PortIndex             -  PCH PCIe Port Index.
+		Valid Port Numbers are: 0 to 19.
+ Enable                -  Enable/Disable PCH PCIe port
+ PortLinkSpeed         -  Port Link Speed. Use PCIE_LINK_SPEED to set
+**/
+typedef struct {
+	UINT8    PortIndex;
+	UINT8    ForceEnable;
+	UINT8    PortLinkSpeed;
+} UPD_PCH_PCIE_PORT;
+
+/**
+ PCHPCIPORT_CONFIG:
+ PciPortConfig            - Pointer to an array of PCH PCI Ports to be configured
+ RootPortFunctionSwapping - Disable root port swapping based on device
+		connection status
+ PciePllSsc               - Specifies the Pcie Pll Spread Spectrum Percentage
+		The value of this policy is in 1/10th percent units.
+		Valid spread range: 0-20. Auto: 0xFE (sets it to hardware default)
+		Completely Disable PCIe PLL SSC: 0xFF
+		A value of 0 is SSC of 0.0%. A value of 20 is SSC of 2.0%
+ NumberOfEntries          - Number of entries in the PCH PCI Port configuration
+**/
+typedef struct {
+	UPD_PCH_PCIE_PORT   *PciPortConfig;
+	UINT8               RootPortFunctionSwapping;
+	UINT8               PciePllSsc;
+	UINT16              NumberOfEntries;
+} PCHPCIPORT_CONFIG;
+
+/** FSP-M Configuration
+**/
+typedef struct {
+
+/** Offset 0x0040 - MRC Debug Print Level
+	Select the FSP MRC debug message print level. Options are a bitmask, so you can
+	combine options. BIT0:MIN DEBUG, BIT1:MAX DEBUG, BIT2:TRACE, BIT3:MEM TRAIN, BIT4:TEST,
+	BIT5:CPGC, BIT6:REG ACCESS
+**/
+	UINT8                       PcdFspMrcDebugPrintErrorLevel;
+
+/** Offset 0x0041 - KTI Debug Print Level
+	Select the FSP KTI debug message print level. Options are a bitmask, so you can
+	combine options. BIT0:ERROR, BIT1:WARNING, BIT2:INFO0, BIT3:INFO1
+**/
+	UINT8                       PcdFspKtiDebugPrintErrorLevel;
+
+/** Offset 0x0042 - HSUART Device
+	Select the PCI High Speed UART Device for Serial Port.
+	0:HSUART0, 1:HSUART1, 2:HSUART2
+**/
+	UINT8                       PcdHsuartDevice;
+
+/** Offset 0x0043 - Customer Revision
+	The Customer can set this revision string for their own purpose.
+**/
+	UINT8                       PcdCustomerRevision[32];
+
+/** Offset 0x0063 - GpioConfig
+	GpioConfig Struct. Defaults: GpioTable:NULL, NumberOfEntries:0x00
+**/
+	GPIOTABLE_CONFIG            GpioConfig;
+
+/** Offset 0x006B - IioBifurcationConfig
+	IioBifurcationConfig Table Struct. Defaults: IioBifurcationTable:NULL,
+		NumberOfEntries:0x00
+**/
+	IIOBIFURCATION_CONFIG       IioBifurcationConfig;
+
+/** Offset 0x0073
+**/
+	UINT8                       UnusedUpdSpace0[16];
+
+/** Offset 0x0083 - VTdConfig
+	VTdConfig Struct. Defaults: All values are set to 0. VTd Disabled.
+**/
+	VTD_CONFIG                VTdConfig;
+
+	UINT8                     reserved1[35];
+
+/** Offset 0x00A9 - Board ID Number
+	Select the BoardId based on the target Platform. Default assumes an unknown board.
+**/
+	UINT8                     BoardId;
+
+	UINT8                     reserved2[24];
+
+/** Offset 0x00C2 **/
+	VOID                      *SetupStructPtr;
+
+	UINT8                     reserved3[20];
+
+/** Offset 0x00DA - IioPciConfig
+	IIO Pci Port Config Struct. Defaults: All pointers are NULL. All values are set to zero.
+**/
+	IIOPCIPORT_CONFIG         IioPciConfig;
+
+/** Offset 0x00E0 - PchPciConfig
+	PCH Pci Port Config Struct. Defaults: All pointers are NULL. All values are set to zero.
+**/
+	PCHPCIPORT_CONFIG         PchPciConfig;
+
+/** Offset 0x00E8 - IioResourceConfig
+	IIO Resource Struct. Defaults: All pointers are NULL. All values are set to zero.
+**/
+	IIORESOURCE_CONFIG        IioResourceConfig;
+
+	UINT8                     reserved4[3];
+
+/** Offset 0x00F1 - DCI Enable
+	Enable / Disable DCI
+	$EN_DIS
+**/
+	UINT8                     PchDciEn;
+
+/** Offset 0x00F2 - IO Margining Tool (IOMT) Enable
+	Enable / Disable Io Margining Tool
+	$EN_DIS
+**/
+	UINT8                     IomtEnable;
+
+/** Offset 0x00F3 - Hyper Threading (HT) disable
+	Disable Hyper threading. Disable: 0x01 | Enable: 0x00 | Default - HT enabled
+	$EN_DIS
+**/
+	UINT8                     HyperThreadingDisable;
+
+/** Offset 0x00F4
+**/
+	UINT8                     UnusedUpdSpace1[236];
+
+/** Offset 0x01E0
+**/
+	UINT8                     ReservedMemoryInitUpd[16];
+} FSP_M_CONFIG;
+
+/** Fsp M UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+	FSP_UPD_HEADER            FspUpdHeader;
+
+/** Offset 0x0020
+**/
+	FSPM_ARCH_UPD             FspmArchUpd;
+
+/** Offset 0x0040
+**/
+	FSP_M_CONFIG              FspmConfig;
+
+/** Offset 0x01F0 - FspmVersion
+	FSP-M UPD Version Number
+**/
+	UINT16                    FspmUpdVersion;
+
+/** Offset 0x01F2
+**/
+	UINT8                     UnusedUpdSpace2[12];
+
+/** Offset 0x01FE
+**/
+	UINT16                    UpdTerminator;
+} FSPM_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspsUpd.h
new file mode 100644
index 0000000..b93a1af
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FspsUpd.h
@@ -0,0 +1,198 @@
+/** @file
+
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or
+  other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+  be used to endorse or promote products derived from this software without
+  specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.
+
+  This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPSUPD_H__
+#define __FSPSUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+
+/** FSP-S Configuration
+**/
+typedef struct {
+
+/** Offset 0x0020 - PCIe Controller 0 Bifurcation
+	Configure PCI Express controller 0 bifurcation.
+	0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8
+**/
+	UINT8                       PcdBifurcationPcie0;
+
+/** Offset 0x0021 - PCIe Controller 1 Bifurcation
+	Configure PCI Express controller 1 bifurcation.
+	0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8
+**/
+	UINT8                       PcdBifurcationPcie1;
+
+/** Offset 0x0022 - Active Core Count
+	Select # of Active Cores (Default: 0, 0:ALL, 1..15 = 1..15 Cores)
+	0:ALL, 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13,
+	14:14, 15:15
+**/
+	UINT8                       PcdActiveCoreCount;
+
+/** Offset 0x0023
+**/
+	UINT32                      PcdCpuMicrocodePatchBase;
+
+/** Offset 0x0027
+**/
+	UINT32                      PcdCpuMicrocodePatchSize;
+
+/** Offset 0x002B - PCIe Controller 0
+	Enable / Disable PCI Express controller 0
+	$EN_DIS
+**/
+	UINT8                       PcdEnablePcie0;
+
+/** Offset 0x002C - PCIe Controller 1
+	Enable / Disable PCI Express controller 1
+	$EN_DIS
+**/
+	UINT8                       PcdEnablePcie1;
+
+/** Offset 0x002D - Embedded Multi-Media Controller (eMMC)
+	Enable / Disable Embedded Multi-Media controller
+	$EN_DIS
+**/
+	UINT8                       PcdEnableEmmc;
+
+/** Offset 0x002E - LAN Controllers
+	Enable / Disable LAN controllers, refer to FSP Integration Guide for details.
+	0:Disable LAN 0 & LAN 1, 1:Enable LAN 0 & LAN 1, 2:Disable LAN 1 only
+**/
+	UINT8                       PcdEnableGbE;
+
+/** Offset 0x002F
+**/
+	UINT32                      PcdFiaMuxConfigRequestPtr;
+
+/** Offset 0x0033
+**/
+	UINT8                       UnusedUpdSpace0[4];
+
+/** Offset 0x0037 - PCIe Root Port 0 DeEmphasis
+	Desired DeEmphasis level for PCIE root port
+	0:6dB, 1:3.5dB
+**/
+	UINT8                       PcdPcieRootPort0DeEmphasis;
+
+/** Offset 0x0038 - PCIe Root Port 1 DeEmphasis
+	Desired DeEmphasis level for PCIE root port
+	0:6dB, 1:3.5dB
+**/
+	UINT8                       PcdPcieRootPort1DeEmphasis;
+
+/** Offset 0x0039 - PCIe Root Port 2 DeEmphasis
+	Desired DeEmphasis level for PCIE root port
+	0:6dB, 1:3.5dB
+**/
+	UINT8                       PcdPcieRootPort2DeEmphasis;
+
+/** Offset 0x003A - PCIe Root Port 3 DeEmphasis
+	Desired DeEmphasis level for PCIE root port
+	0:6dB, 1:3.5dB
+**/
+	UINT8                       PcdPcieRootPort3DeEmphasis;
+
+/** Offset 0x003B - PCIe Root Port 4 DeEmphasis
+	Desired DeEmphasis level for PCIE root port
+	0:6dB, 1:3.5dB
+**/
+	UINT8                       PcdPcieRootPort4DeEmphasis;
+
+/** Offset 0x003C - PCIe Root Port 5 DeEmphasis
+	Desired DeEmphasis level for PCIE root port
+	0:6dB, 1:3.5dB
+**/
+	UINT8                       PcdPcieRootPort5DeEmphasis;
+
+/** Offset 0x003D - PCIe Root Port 6 DeEmphasis
+	Desired DeEmphasis level for PCIE root port
+	0:6dB, 1:3.5dB
+**/
+	UINT8                       PcdPcieRootPort6DeEmphasis;
+
+/** Offset 0x003E - PCIe Root Port 7 DeEmphasis
+	Desired DeEmphasis level for PCIE root port
+	0:6dB, 1:3.5dB
+**/
+	UINT8                       PcdPcieRootPort7DeEmphasis;
+
+/** Offset 0x003F
+**/
+	UINT8                       UnusedUpdSpace1;
+
+/** Offset 0x0040
+**/
+	UINT32                      PcdEMMCDLLConfigPtr;
+
+/** Offset 0x0044 - Disable Monitor MWAIT
+	Enable / Disable the Monitor-MWAIT Instruction
+	$EN_DIS
+**/
+	UINT8                       PcdDisableMonitorFSM;
+
+/** Offset 0x0045
+**/
+	UINT8                       UnusedUpdSpace2[155];
+
+/** Offset 0x00E0
+**/
+	UINT8                       ReservedSiliconInitUpd[16];
+} FSPS_CONFIG;
+
+/** Fsp S UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+	FSP_UPD_HEADER              FspUpdHeader;
+
+/** Offset 0x0020
+**/
+	FSPS_CONFIG                 FspsConfig;
+
+/** Offset 0x00F0
+**/
+	UINT8                       UnusedUpdSpace3[14];
+
+/** Offset 0x00FE
+**/
+	UINT16                      UpdTerminator;
+} FSPS_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FsptUpd.h
new file mode 100644
index 0000000..23b4a04
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/FsptUpd.h
@@ -0,0 +1,108 @@
+/** @file
+
+Copyright (c) 2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or
+  other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+  be used to endorse or promote products derived from this software without
+  specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.
+
+  This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPTUPD_H__
+#define __FSPTUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
+/** FSP-T Core UPD
+**/
+typedef struct {
+
+/** Offset 0x0020
+**/
+	UINT32                      MicrocodeRegionBase;
+
+/** Offset 0x0024
+**/
+	UINT32                      MicrocodeRegionLength;
+
+/** Offset 0x0028
+**/
+	UINT32                      CodeRegionBase;
+
+/** Offset 0x002C
+**/
+	UINT32                      CodeRegionLength;
+
+/** Offset 0x0030
+**/
+	UINT8                       Reserved1[16];
+} FSPT_CORE_UPD;
+
+/** FSP-T Configuration
+**/
+typedef struct {
+
+/** Offset 0x0040 - Disable Port80 output in FSP-T
+	Select Port80 Control in FSP-T (0:VPD-Style, 1:Enable Port80 Output, 2:Disable Port80
+	Output, refer to FSP Integration Guide for details
+	0:VPD-Style, 1:Enable Port80 Output[Default], 2:Disable Port80 Output
+**/
+	UINT8                       PcdFsptPort80RouteDisable;
+
+/** Offset 0x0041
+**/
+	UINT8                       ReservedTempRamInitUpd[31];
+} FSPT_CONFIG;
+
+/** Fsp T UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+	FSP_UPD_HEADER              FspUpdHeader;
+
+/** Offset 0x0020
+**/
+	FSPT_CORE_UPD               FsptCoreUpd;
+
+/** Offset 0x0040
+**/
+	FSPT_CONFIG                 FsptConfig;
+
+/** Offset 0x0060
+**/
+	UINT8                       UnusedUpdSpace0[30];
+
+/** Offset 0x007E
+**/
+	UINT16                      UpdTerminator;
+} FSPT_UPD;
+
+#pragma pack()
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/hob_iiouds.h b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/hob_iiouds.h
new file mode 100644
index 0000000..084f24c
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/hob_iiouds.h
@@ -0,0 +1,246 @@
+/**
+Copyright (c) 2019-2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or
+  other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+  be used to endorse or promote products derived from this software without
+  specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.
+
+**/
+
+
+#ifndef _HOB_IIOUDS_H_
+#define _HOB_IIOUDS_H_
+
+#include <fsp/util.h>
+//#include "pci_devs.h"
+
+#define FSP_HOB_IIO_UNIVERSAL_DATA_GUID { \
+	0xa1, 0x96, 0xf3, 0x7f, 0x7d, 0xee, 0x1e, 0x43, \
+	0xba, 0x53, 0x8f, 0xCa, 0x12, 0x7c, 0x44, 0xc0  \
+}
+
+#define NUMBER_PORTS_PER_SOCKET   21
+#define MAX_SOCKET                CONFIG_MAX_SOCKET
+#define MAX_IIO                   MAX_SOCKET
+#define MAX_IIO_STACK             6
+#define MAX_KTI_PORTS             3
+#define MAX_IMC                   2
+#define MAX_CH                    6
+#define MC_MAX_NODE               (MAX_SOCKET * MAX_IMC)
+#define SAD_RULES                 24
+#define TDP_MAX_LEVEL             5
+
+#pragma pack(1)
+
+//--------------------------------------------------------------------------------------//
+// Structure definitions for Universal Data Store (UDS)
+//--------------------------------------------------------------------------------------//
+typedef struct uint64_t_struct {
+	uint32_t  lo;
+	uint32_t  hi;
+} UINT64_STRUCT;
+
+typedef struct {
+	uint8_t       Device;
+	uint8_t       Function;
+} IIO_PORT_INFO;
+
+typedef struct {
+	// TRUE, if the link is valid (i.e reached normal operation)
+	uint8_t                     Valid;
+	uint8_t                     PeerSocId;     // Socket ID
+	uint8_t                     PeerSocType;   // Socket Type (0 - CPU; 1 - IIO)
+	uint8_t                     PeerPort;      // Port of the peer socket
+} QPI_PEER_DATA;
+
+typedef struct {
+	uint8_t            Valid;
+	uint8_t            SocketFirstBus;
+	uint8_t            SocketLastBus;
+	uint8_t            segmentSocket;
+	uint8_t            PcieSegment;
+	UINT64_STRUCT    SegMmcfgBase;
+	uint8_t            stackPresentBitmap;
+	uint8_t            StackBus[MAX_IIO_STACK];
+	uint8_t            M2PciePresentBitmap;
+	uint8_t            TotM3Kti;
+	uint8_t            TotCha;
+	uint32_t           ChaList;
+	uint32_t           SocId;
+	QPI_PEER_DATA    PeerInfo[MAX_KTI_PORTS];		// QPI LEP info
+} QPI_CPU_DATA;
+
+typedef struct {
+	uint8_t            Valid;
+	uint8_t            SocId;
+	QPI_PEER_DATA    PeerInfo[MAX_SOCKET];		// QPI LEP info
+} QPI_IIO_DATA;
+
+typedef struct {
+	IIO_PORT_INFO    PortInfo[NUMBER_PORTS_PER_SOCKET];
+} IIO_DMI_PCIE_INFO;
+
+typedef struct _STACK_RES {
+	uint8_t    Personality;
+	uint8_t    BusBase;
+	uint8_t    BusLimit;
+	uint16_t   PciResourceIoBase;
+	uint16_t   PciResourceIoLimit;
+	uint32_t   IoApicBase;
+	uint32_t   IoApicLimit;
+	uint32_t   PciResourceMem32Base;
+	uint32_t   PciResourceMem32Limit;
+	uint64_t   PciResourceMem64Base;
+	uint64_t   PciResourceMem64Limit;
+	uint32_t   VtdBarAddress;
+} STACK_RES;
+
+typedef struct {
+	uint8_t                  Valid;
+	int8_t                   SocketID;            // Socket ID of the IIO (0..3)
+	uint8_t                  BusBase;
+	uint8_t                  BusLimit;
+	uint16_t                 PciResourceIoBase;
+	uint16_t                 PciResourceIoLimit;
+	uint32_t                 IoApicBase;
+	uint32_t                 IoApicLimit;
+	uint32_t                 PciResourceMem32Base;
+	uint32_t                 PciResourceMem32Limit;
+	uint64_t                 PciResourceMem64Base;
+	uint64_t                 PciResourceMem64Limit;
+	STACK_RES              StackRes[MAX_IIO_STACK];
+	uint32_t                 RcBaseAddress;
+	IIO_DMI_PCIE_INFO      PcieInfo;
+	uint8_t                  DmaDeviceCount;
+} IIO_RESOURCE_INSTANCE;
+
+typedef struct {
+	uint16_t          PlatGlobalIoBase;       // Global IO Base
+	uint16_t          PlatGlobalIoLimit;	  // Global IO Limit
+	uint32_t          PlatGlobalMmiolBase;	// Global Mmiol base
+	uint32_t          PlatGlobalMmiolLimit;   // Global Mmiol limit
+	uint64_t          PlatGlobalMmiohBase;	// Global Mmioh Base [43:0]
+	uint64_t          PlatGlobalMmiohLimit;   // Global Mmioh Limit [43:0]
+	QPI_CPU_DATA      CpuQpiInfo[MAX_SOCKET]; // QPI related info per CPU
+	QPI_IIO_DATA      IioQpiInfo[MAX_SOCKET]; // QPI related info per IIO
+	uint32_t          MemTsegSize;
+	uint32_t          MemIedSize;
+	uint64_t          PciExpressBase;
+	uint32_t          PciExpressSize;
+	uint32_t          MemTolm;
+	IIO_RESOURCE_INSTANCE   IIO_resource[MAX_SOCKET];
+	uint8_t           numofIIO;
+	uint8_t           MaxBusNumber;
+	// This data array is valid only for SBSP, not for non-SBSP CPUs. <AS> for CpuSv
+	uint32_t          packageBspApicID[MAX_SOCKET];
+	uint8_t           EVMode;
+	uint8_t           Pci64BitResourceAllocation;
+	uint8_t           SkuPersonality[MAX_SOCKET];
+	uint8_t           VMDStackEnable[MAX_IIO][MAX_IIO_STACK];
+	uint16_t          IoGranularity;
+	uint32_t          MmiolGranularity;
+	UINT64_STRUCT     MmiohGranularity;
+	uint8_t           RemoteRequestThreshold;
+	// bitmap of Softsku sockets with CPUs present detected
+	uint64_t          softskuSocketPresentBitMap;
+	BOOLEAN           Simics; // TRUE - Simics Environtment; FALSE - H\w
+} PLATFORM_DATA;
+
+typedef struct {
+	uint32_t         FILLER_BUG;
+	// Current programmed CSI (or UPI) Link speed (Slow/Full speed mode)
+	uint8_t          CurrentCsiLinkSpeed;
+	// Current requested CSI (or UPI) Link frequency (in GT)
+	uint8_t          CurrentCsiLinkFrequency;
+	// output kti link enabled status for PM
+	uint32_t         OutKtiPerLinkL1En[MAX_SOCKET];
+	uint8_t          IsocEnable;
+	// Size of the memory range requested by ME FW, in MB
+	uint32_t         meRequestedSize;
+	uint8_t          DmiVc1;
+	uint8_t          DmiVcm;
+	uint32_t         CpuPCPSInfo;
+	uint8_t          MinimumCpuStepping;
+	uint8_t          LtsxEnable;
+	uint8_t          MctpEn;
+	uint8_t          cpuType;
+	uint8_t          cpuSubType;
+	uint8_t          SystemRasType;
+	// 1,..4. Total number of CPU packages installed and detected (1..4)by QPI RC
+	uint8_t          numCpus;
+	// Fused Core Mask in the package
+	uint32_t         FusedCores[MAX_SOCKET];
+	// Current activated core Mask in the package
+	uint32_t         ActiveCores[MAX_SOCKET];
+	// Package Max Non-turbo Ratio (per socket).
+	uint8_t          MaxCoreToBusRatio[MAX_SOCKET];
+	// Package Maximum Efficiency Ratio (per socket).
+	uint8_t          MinCoreToBusRatio[MAX_SOCKET];
+	uint8_t          CurrentCoreToBusRatio; // Current system Core to Bus Ratio
+	// ISS Capable (system level) Bit[7:0] and current Config TDP Level Bit[15:8]
+	uint32_t         IntelSpeedSelectCapable;
+	uint32_t         IssConfigTdpLevelInfo; // get B2P CONFIG_TDP_GET_LEVELS_INFO
+	// get B2P CONFIG_TDP_GET_TDP_INFO
+	uint32_t         IssConfigTdpTdpInfo[TDP_MAX_LEVEL];
+	// get B2P CONFIG_TDP_GET_POWER_INFO
+	uint32_t         IssConfigTdpPowerInfo[TDP_MAX_LEVEL];
+	// get B2P CONFIG_TDP_GET_CORE_COUNT
+	uint8_t          IssConfigTdpCoreCount[TDP_MAX_LEVEL];
+	// bitmap of sockets with CPUs present detected by QPI RC
+	uint32_t         socketPresentBitMap;
+	// bitmap of NID w/ fpga  present detected by QPI RC
+	uint32_t         FpgaPresentBitMap;
+	uint16_t         tolmLimit;
+	uint32_t         tohmLimit;
+	uint32_t         mmCfgBase;
+	uint32_t         RcVersion;
+	uint8_t				   DdrXoverMode;		   // DDR 2.2 Mode
+	// For RAS
+	uint8_t          bootMode;
+	uint8_t          OutClusterOnDieEn; // Whether RC enabled COD support
+	uint8_t          OutSncEn;
+	uint8_t          OutNumOfCluster;
+	uint8_t          imcEnabled[MAX_SOCKET][MAX_IMC];
+	uint8_t          numChPerMC;
+	uint8_t          maxCh;
+	uint8_t          maxIMC;
+	uint16_t				 LlcSizeReg;
+	uint8_t				   chEnabled[MAX_SOCKET][MAX_CH];
+	uint8_t				   mcId[MAX_SOCKET][MAX_CH];
+	uint8_t				   memNode[MC_MAX_NODE];
+	uint8_t          IoDcMode;
+	uint8_t          CpuAccSupport;
+	uint8_t          SmbusErrorRecovery;
+	uint8_t          AepDimmPresent;
+} SYSTEM_STATUS;
+
+typedef struct {
+	PLATFORM_DATA	  PlatformData;
+	SYSTEM_STATUS	  SystemStatus;
+	uint32_t          OemValue;
+} IIO_UDS;
+#pragma pack()
+
+void soc_display_iio_universal_data_hob(void);
+
+#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/hob_memmap.h b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/hob_memmap.h
new file mode 100644
index 0000000..954e43c
--- /dev/null
+++ b/src/vendorcode/intel/fsp/fsp2_0/skylake_sp/hob_memmap.h
@@ -0,0 +1,119 @@
+/**
+Copyright (c) 2019-2020, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or
+  other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+  be used to endorse or promote products derived from this software without
+  specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+  THE POSSIBILITY OF SUCH DAMAGE.
+
+**/
+
+
+#ifndef _MEMORY_MAP_GUID_H_
+#define _MEMORY_MAP_GUID_H_
+
+#define FSP_SYSTEM_MEMORYMAP_HOB_GUID { \
+	0x15, 0x00, 0x87, 0xf8, 0x94, 0x69, 0x98, 0x4b, 0x95, 0xa2, \
+	0xbd, 0x56, 0xda, 0x91, 0xc0, 0x7f \
+	}
+
+#define MEMTYPE_1LM_MASK       (1 << 0)
+#define MEMTYPE_2LM_MASK       (1 << 1)
+#define MEMTYPE_VOLATILE_MASK  (MEMTYPE_1LM_MASK | MEMTYPE_2LM_MASK)
+
+#define MAX_IMC_PER_SOCKET                2
+#define MAX_SRAT_MEM_ENTRIES_PER_IMC      8
+#define MAX_ACPI_MEMORY_AFFINITY_COUNT ( \
+	MAX_SOCKET * MAX_IMC_PER_SOCKET * MAX_SRAT_MEM_ENTRIES_PER_IMC \
+	)
+
+/* ACPI SRAT Memory Flags */
+#define SRAT_ACPI_MEMORY_ENABLED               (1 << 0)
+#define SRAT_ACPI_MEMORY_HOT_REMOVE_SUPPORTED  (1 << 1)
+#define SRAT_ACPI_MEMORY_NONVOLATILE           (1 << 2)
+
+#define MEM_TYPE_RESERVED (1 << 8)
+#define MEM_ADDR_64MB_SHIFT_BITS 26
+
+//
+//  System Memory Map HOB information
+//
+
+#pragma pack(1)
+
+struct SystemMemoryMapElement {
+	UINT8    NodeId;         // Node ID of the HA Owning the memory
+	UINT8    SocketId;       // Socket Id of socket that has his memory - ONLY IN NUMA
+	UINT8    ImcInterBitmap; // IMC interleave bitmap for this DRAM rule - ONLY IN NUMA
+	UINT32   BaseAddress;    // Base Address of the element in 64MB chunks
+	UINT32   ElementSize;    // Size of this memory element in 64MB chunks
+	// Type of this memory element; Bit0: 1LM  Bit1: 2LM  Bit2: PMEM
+	// Bit3: PMEM-cache  Bit4: BLK Window  Bit5: CSR/Mailbox/Ctrl region
+	UINT16   Type;
+};
+
+struct SystemMemoryMapHob {
+	UINT32  lowMemBase;		 // Mem base in 64MB units for below 4GB mem.
+	UINT32  lowMemSize;		 // Mem size in 64MB units for below 4GB mem.
+	UINT32  highMemBase;		// Mem base in 64MB units for above 4GB mem.
+	UINT32  highMemSize;		// Mem size in 64MB units for above 4GB mem.
+	UINT32  asilLoMemBase;	// Mem base in 64MB units for below 4GB mem.
+	UINT32  asilHiMemBase;	// Mem base in 64MB units for above 4GB mem.
+	UINT32  asilLoMemSize;	// Mem size in 64MB units for below 4GB mem.
+	UINT32  asilHiMemSize;	// Mem size in 64MB units for above 4GB mem.
+
+	UINT32  memSize;			// Total physical memory size
+	UINT16  memFreq;			// Mem Frequency
+	UINT8	memMode;			// 0 - Independent, 1 - Lockstep
+	UINT8	volMemMode;	 // 0 - 1LM, 1 - 2LM
+	UINT8	DimmType;
+	UINT16  DramType;
+	UINT8	DdrVoltage;
+	// If at least one Aep Dimm Present (used by Nfit), then this should get set
+	UINT8	AepDimmPresent;
+	UINT8	SADNum;
+	UINT8	XMPProfilesSup;
+	UINT8	cpuType;
+	UINT8	cpuStepping;
+	UINT8	SystemRasType;
+	UINT8	RasModesEnabled; // RAS modes that are enabled
+	UINT8	ExRasModesEnabled; // Extended RAS modes that are enabled
+	//RAS modes that are supported by current memory population.
+	UINT8	RasModesSupported;
+	// 0 - SNC disabled for this configuration, 1 - SNC enabled for this configuration
+	UINT8	sncEnabled;
+	UINT8	NumOfCluster;
+	UINT8	NumChPerMC;
+	UINT8	numberEntries;	 // Number of Memory Map Elements
+	UINT8	maxIMC;
+	UINT8	maxCh;
+	struct  SystemMemoryMapElement Element[MAX_SOCKET * SAD_RULES];
+	UINT8	reserved1[982];
+	UINT8	reserved2[4901*MAX_SOCKET];
+	UINT8	reserved3[707];
+};
+
+#pragma pack()
+
+void soc_display_memmap_hob(void);
+
+#endif