Duncan Laurie has submitted this change. ( https://review.coreboot.org/c/coreboot/+/47377 )
Change subject: mb/google/volteer: Enable RTD3 for SD card ......................................................................
mb/google/volteer: Enable RTD3 for SD card
Enable the PCIe RTD3 driver for the PCIe attached SD card interface and provide the enable/reset GPIOs. These GPIOs are common across all variants so this is implemented in the baseboard devicetree with an fw_config probe if the device is present. The RTS5261 device does not have an enable GPIO so it is disabled in a workaround in mainboard.c, along with marking the SD-Express device as external.
BUG=b:162289926, b:162289982 TEST=Tested on Delbin platform to ensure the system can enter the S0i3.2 substate and suspend/resume is stable. enabling this for the regular Genesys
Change-Id: I40fe05829783c7bce2a2c4c1520a4a7430642e26 Signed-off-by: Duncan Laurie dlaurie@google.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/47377 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Furquan Shaikh furquan@google.com --- M src/mainboard/google/volteer/fw_config.c M src/mainboard/google/volteer/variants/baseboard/devicetree.cb 2 files changed, 28 insertions(+), 1 deletion(-)
Approvals: build bot (Jenkins): Verified Furquan Shaikh: Looks good to me, approved
diff --git a/src/mainboard/google/volteer/fw_config.c b/src/mainboard/google/volteer/fw_config.c index 4067fa5..50e8f93 100644 --- a/src/mainboard/google/volteer/fw_config.c +++ b/src/mainboard/google/volteer/fw_config.c @@ -66,6 +66,10 @@ PAD_NC(GPP_R7, NONE), };
+static const struct pad_config sd_gl9755s_pads[] = { + PAD_CFG_GPO(GPP_D16, 1, DEEP), +}; + static void fw_config_handle(void *unused) { if (fw_config_probe(FW_CONFIG(AUDIO, NONE))) { @@ -94,5 +98,9 @@ gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads)); gpio_configure_pads(sndw_disable_pads, ARRAY_SIZE(sndw_disable_pads)); } + if (fw_config_probe(FW_CONFIG(DB_SD, SD_GL9755S))) { + printk(BIOS_INFO, "Configure GPIOs for SD GL9755S.\n"); + gpio_configure_pads(sd_gl9755s_pads, ARRAY_SIZE(sd_gl9755s_pads)); + } } BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL); diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb index 50be736..fa807ba 100644 --- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb @@ -445,7 +445,26 @@ device ref sata on end device ref pcie_rp1 on end device ref pcie_rp7 on end - device ref pcie_rp8 on end + device ref pcie_rp8 on + probe DB_SD SD_GL9755S + probe DB_SD SD_RTS5261 + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D16)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H3)" + register "srcclk_pin" = "3" + device generic 0 on + probe DB_SD SD_GL9755S + end + end + chip soc/intel/common/block/pcie/rtd3 + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H3)" + register "srcclk_pin" = "3" + register "is_external" = "1" + device generic 1 on + probe DB_SD SD_RTS5261 + end + end + end device ref pcie_rp9 on end device ref pcie_rp11 on end device ref uart0 on end