[coreboot-gerrit] Change in coreboot[master]: [WIP] mb/asus/sklkbl_h: Add base for Asus Skylake Boards

[Marvin Drees (Code Review)]

Attention is currently required from:  Felix Singer, Paul Menzel, Angel Pons.
Marvin Drees has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/48648 )

Change subject: [WIP] mb/asus/sklkbl_h: Add base for Asus Skylake Boards
......................................................................

Patch Set 16:

(1 comment)

Commit Message:

https://review.coreboot.org/c/coreboot/+/48648/comment/1a870294_bf291142 
PS16, Line 28: - EM100 usage flakey
> It’d be great if you elaborated a little.

First I need to run "make" twice so the ifdtool actually modifies the values, second even if the image is modified to run at lower speeds sometimes it wouldn't start and the trace output of the em100 shows "unknown instruction" several times followed by "chip erase" several times. These issues can't reliably be reproduced though, they only happen every 1 out of 5 tries roughly, that's why I just called it flakey.