[coreboot-gerrit] Change in coreboot[master]: mb/google/brya: Update camera NVM parameters

[Bernardo Perez Priego (Code Review)]

Attention is currently required from: Selma Bensaid, Paul Menzel, Bernardo Perez Priego, Andy Yeh, [e-mail], ShawnX Tu.
Hello build bot (Jenkins), Selma Bensaid, Tim Wawrzynczak, Andy Yeh, [e-mail], ShawnX Tu,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/58374

to look at the new patch set (#9).

Change subject: mb/google/brya: Update camera NVM parameters
......................................................................

mb/google/brya: Update camera NVM parameters

Change HID name from INT3499 to PRP0001 along with size and
address width. Size decreased from 10K to 2K, address width
decreased from 14 to 8.

BUG=b:203014972
Test= Boot board and issue commands:
     `cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom >
         ./brya_imx208_eeprom.bin`
     `hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log`
     You should see the result in brya_imx208_eeprom_dump.log to be
     same as module nvm file by vendor provided or meet the Intel nvm
     calibration format.
     (e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00)

Signed-off-by: Bernardo Perez Priego 
Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0
---
M src/mainboard/google/brya/variants/brya0/overridetree.cb
1 file changed, 4 insertions(+), 3 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/74/58374/9