Attention is currently required from: Alexander Couzens, Keith Hui, Patrick Rudolph.
Hello Alexander Couzens, Patrick Rudolph, build bot (Jenkins),
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/85944?usp=email
to look at the new patch set (#3).
The following approvals got outdated and were removed: Code-Review+1 by Patrick Rudolph, Verified+1 by build bot (Jenkins)
Change subject: mb/lenovo/x131e: Clean up USB configurations ......................................................................
mb/lenovo/x131e: Clean up USB configurations
As of commit a911b7584820 ("mb/*: Remove old USB configurations from SNB/bd82x6x boards") USB configurations are drawn exclusively from devicetree. The old copy carried by early_init.c should have been removed back then. Since it has nothing else, drop the whole file.
Remove xhci_overcurrent_mapping as it is now derived from usb_port_config.
According to schematics only the first two ports are wired for xHCI and both goes to OC0#. Remove OC pin assignment from disabled third port so the (former) xhci_overcurrent_mapping can be derived correctly. Also adjust xhci_switchable_ports and superspeed_capable_ports to match.
Thanks to Patrick Rudolph for the information.
Change-Id: I6bdc9a188b2baa2207aaccb46821b58f97ff7da6 Signed-off-by: Keith Hui buurin@gmail.com --- M src/mainboard/lenovo/x131e/Makefile.mk M src/mainboard/lenovo/x131e/devicetree.cb D src/mainboard/lenovo/x131e/early_init.c 3 files changed, 3 insertions(+), 26 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/44/85944/3