Stefan Reinauer (stefan.reinauer@coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7117
-gerrit
commit f8fdaeaf80e2196f8f7ba27ee58c032d91312c35 Author: Stefan Reinauer stefan.reinauer@coreboot.org Date: Sat Oct 18 10:21:14 2014 +0200
Drop GX1, CS5330 and related boards
There is no Cache As Ram for these boards, let's get rid of them.
Change-Id: Ib41f8cd64fc9a440838aea86076d6514aacb301c Signed-off-by: Stefan Reinauer stefan.reinauer@coreboot.org --- src/cpu/amd/Kconfig | 1 - src/cpu/amd/Makefile.inc | 1 - src/cpu/amd/geode_gx1/Kconfig | 36 -- src/cpu/amd/geode_gx1/Makefile.inc | 28 -- src/cpu/amd/geode_gx1/cpu_setup.inc | 68 ---- src/cpu/amd/geode_gx1/geode_gx1_init.c | 100 ----- src/cpu/amd/geode_gx1/gx_setup.inc | 47 --- src/include/cpu/amd/gx1def.h | 54 --- src/mainboard/Kconfig | 15 - src/mainboard/advantech/Kconfig | 35 -- src/mainboard/advantech/pcm-5820/Kconfig | 45 --- src/mainboard/advantech/pcm-5820/board_info.txt | 5 - src/mainboard/advantech/pcm-5820/devicetree.cb | 56 --- src/mainboard/advantech/pcm-5820/irq_tables.c | 45 --- src/mainboard/advantech/pcm-5820/romstage.c | 41 -- src/mainboard/asi/Kconfig | 38 -- src/mainboard/asi/mb_5blgp/Kconfig | 45 --- src/mainboard/asi/mb_5blgp/board_info.txt | 2 - src/mainboard/asi/mb_5blgp/devicetree.cb | 55 --- src/mainboard/asi/mb_5blgp/irq_tables.c | 46 --- src/mainboard/asi/mb_5blgp/romstage.c | 41 -- src/mainboard/asi/mb_5blmp/Kconfig | 45 --- src/mainboard/asi/mb_5blmp/board_info.txt | 4 - src/mainboard/asi/mb_5blmp/devicetree.cb | 48 --- src/mainboard/asi/mb_5blmp/irq_tables.c | 39 -- src/mainboard/asi/mb_5blmp/romstage.c | 42 -- src/mainboard/axus/Kconfig | 35 -- src/mainboard/axus/tc320/Kconfig | 46 --- src/mainboard/axus/tc320/board_info.txt | 2 - src/mainboard/axus/tc320/devicetree.cb | 55 --- src/mainboard/axus/tc320/irq_tables.c | 122 ------ src/mainboard/axus/tc320/romstage.c | 42 -- src/mainboard/bcom/Kconfig | 3 - src/mainboard/bcom/winnet100/Kconfig | 46 --- src/mainboard/bcom/winnet100/board_info.txt | 4 - src/mainboard/bcom/winnet100/devicetree.cb | 56 --- src/mainboard/bcom/winnet100/irq_tables.c | 121 ------ src/mainboard/bcom/winnet100/romstage.c | 42 -- src/mainboard/bifferos/bifferboard/romstage.c | 5 - src/mainboard/eaglelion/5bcm/Kconfig | 45 --- src/mainboard/eaglelion/5bcm/board_info.txt | 1 - src/mainboard/eaglelion/5bcm/cmos.layout | 72 ---- src/mainboard/eaglelion/5bcm/devicetree.cb | 52 --- src/mainboard/eaglelion/5bcm/irq_tables.c | 31 -- src/mainboard/eaglelion/5bcm/romstage.c | 23 -- src/mainboard/eaglelion/Kconfig | 35 -- src/mainboard/iei/Kconfig | 9 - src/mainboard/iei/juki-511p/Kconfig | 47 --- src/mainboard/iei/juki-511p/board_info.txt | 2 - src/mainboard/iei/juki-511p/cmos.layout | 72 ---- src/mainboard/iei/juki-511p/devicetree.cb | 57 --- src/mainboard/iei/juki-511p/irq_tables.c | 103 ----- src/mainboard/iei/juki-511p/romstage.c | 48 --- src/mainboard/iei/nova4899r/Kconfig | 46 --- src/mainboard/iei/nova4899r/board_info.txt | 2 - src/mainboard/iei/nova4899r/cmos.layout | 72 ---- src/mainboard/iei/nova4899r/devicetree.cb | 64 --- src/mainboard/iei/nova4899r/irq_tables.c | 214 ---------- src/mainboard/iei/nova4899r/romstage.c | 43 -- src/mainboard/iei/rocky-512/Kconfig | 9 - src/mainboard/iei/rocky-512/board_info.txt | 3 - src/mainboard/televideo/Kconfig | 35 -- src/mainboard/televideo/tc7020/Kconfig | 45 --- src/mainboard/televideo/tc7020/board_info.txt | 2 - src/mainboard/televideo/tc7020/devicetree.cb | 57 --- src/mainboard/televideo/tc7020/irq_tables.c | 148 ------- src/mainboard/televideo/tc7020/romstage.c | 42 -- src/northbridge/amd/Kconfig | 1 - src/northbridge/amd/Makefile.inc | 1 - src/northbridge/amd/gx1/Kconfig | 22 -- src/northbridge/amd/gx1/Makefile.inc | 21 - src/northbridge/amd/gx1/northbridge.c | 166 -------- src/northbridge/amd/gx1/raminit.c | 354 ----------------- src/northbridge/amd/gx1/raminit.h | 11 - src/southbridge/amd/Kconfig | 1 - src/southbridge/amd/Makefile.inc | 1 - src/southbridge/amd/cs5530/Kconfig | 74 ---- src/southbridge/amd/cs5530/Makefile.inc | 25 -- src/southbridge/amd/cs5530/bitmap.c | 304 --------------- src/southbridge/amd/cs5530/chip.h | 29 -- src/southbridge/amd/cs5530/cs5530.c | 59 --- src/southbridge/amd/cs5530/cs5530.h | 46 --- src/southbridge/amd/cs5530/enable_rom.c | 47 --- src/southbridge/amd/cs5530/ide.c | 78 ---- src/southbridge/amd/cs5530/isa.c | 64 --- src/southbridge/amd/cs5530/pirq.c | 39 -- src/southbridge/amd/cs5530/vga.c | 495 ------------------------ 87 files changed, 4778 deletions(-)
diff --git a/src/cpu/amd/Kconfig b/src/cpu/amd/Kconfig index 5603f41..5892dc8 100644 --- a/src/cpu/amd/Kconfig +++ b/src/cpu/amd/Kconfig @@ -12,7 +12,6 @@ source src/cpu/amd/socket_S1G1/Kconfig
source src/cpu/amd/model_fxx/Kconfig source src/cpu/amd/model_10xxx/Kconfig -source src/cpu/amd/geode_gx1/Kconfig source src/cpu/amd/geode_gx2/Kconfig source src/cpu/amd/geode_lx/Kconfig
diff --git a/src/cpu/amd/Makefile.inc b/src/cpu/amd/Makefile.inc index 85ce7f6..2bce252 100644 --- a/src/cpu/amd/Makefile.inc +++ b/src/cpu/amd/Makefile.inc @@ -8,7 +8,6 @@ subdirs-$(CONFIG_CPU_AMD_SOCKET_AM2R2) += socket_AM2r2 subdirs-$(CONFIG_CPU_AMD_SOCKET_AM3) += socket_AM3 subdirs-$(CONFIG_CPU_AMD_SOCKET_ASB2) += socket_ASB2 subdirs-$(CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA) += socket_C32 -subdirs-$(CONFIG_CPU_AMD_GEODE_GX1) += geode_gx1 subdirs-$(CONFIG_CPU_AMD_GEODE_GX2) += geode_gx2 subdirs-$(CONFIG_CPU_AMD_GEODE_LX) += geode_lx subdirs-$(CONFIG_CPU_AMD_SC520) += sc520 diff --git a/src/cpu/amd/geode_gx1/Kconfig b/src/cpu/amd/geode_gx1/Kconfig deleted file mode 100644 index e1444e1..0000000 --- a/src/cpu/amd/geode_gx1/Kconfig +++ /dev/null @@ -1,36 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -config CPU_AMD_GEODE_GX1 - bool - select ARCH_BOOTBLOCK_X86_32 - select ARCH_ROMSTAGE_X86_32 - select ARCH_RAMSTAGE_X86_32 - -if CPU_AMD_GEODE_GX1 - -config DCACHE_RAM_BASE - hex - default 0xc0000 - -config DCACHE_RAM_SIZE - hex - default 0x01000 - -endif # CPU_AMD_GEODE_GX1 diff --git a/src/cpu/amd/geode_gx1/Makefile.inc b/src/cpu/amd/geode_gx1/Makefile.inc deleted file mode 100644 index ab3706b..0000000 --- a/src/cpu/amd/geode_gx1/Makefile.inc +++ /dev/null @@ -1,28 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -subdirs-y += ../../x86/tsc -subdirs-y += ../../x86/lapic -subdirs-y += ../../x86/cache -subdirs-y += ../../x86/smm -ramstage-y += geode_gx1_init.c - -cpu_incs += $(src)/cpu/amd/geode_gx1/cpu_setup.inc -cpu_incs += $(src)/cpu/amd/geode_gx1/gx_setup.inc diff --git a/src/cpu/amd/geode_gx1/cpu_setup.inc b/src/cpu/amd/geode_gx1/cpu_setup.inc deleted file mode 100644 index d701f8d..0000000 --- a/src/cpu/amd/geode_gx1/cpu_setup.inc +++ /dev/null @@ -1,68 +0,0 @@ -/* - freebios/src/northbridge/nsc/gx1/cpu_setup.inc - - Copyright (c) 2002 Christer Weinigel wingel@hack.org - - Initialize the GX1 CPU configuration registers -*/ - -/* USES: esi, ecx, eax */ - -#include <cpu/amd/gx1def.h> - - movl %eax, %ebp /* preserve bist */ - -cpu_setup_start: - leal cpu_setup_table, %esi - movl $cpu_setup_len, %ecx - -cpu_setup_loop: - movw (%esi), %ax - addl $2, %esi - outb %al, $0x22 - movb %ah, %al - outb %al, $0x23 - loop cpu_setup_loop - - movb $0xff, %al /* DIR1 -- Identification Register 1 */ - outb %al, $0x22 - inb $0x23, %al - cmpb $0x63, %al /* Revision for GXLV rev 3 */ - jbe cpu_no_ccr4 - - movb $0xe8, %al /* CCR4 */ - outb %al, $0x22 - inb $0x23, %al - orb $0x20, %al /* Enable FPU Fast Mode */ - outb %al, $0x23 - - movb $0xf0, %al /* PCR1 --- Performace Control */ - outb %al, $0x22 - inb $0x23, %al - orb $0x02, %al /* Incrementor on, whatever that is */ - outb %al, $0x23 - - movb $0x20, %al /* PCR0 --- Performace Control */ - outb %al, $0x22 - inb $0x23, %al - orb $0x20, %al /* Must be 1 according to data book */ - orb $0x04, %al /* Incrementor Margin 10 */ - outb %al, $0x23 -cpu_no_ccr4: - - jmp cpu_setup_end - -cpu_setup_table: - .byte 0xc1, 0x00 /* NO SMIs */ - .byte 0xc3, 0x14 /* Enable CPU config register */ - .byte 0x20, 0x00 - .byte 0xb8, GX_BASE>>30 /* Enable GXBASE address */ - .byte 0xc2, 0x00 - .byte 0xe8, 0x98 - .byte 0xc3, 0xf8 /* Enable CPU config register */ -cpu_setup_len = (.-cpu_setup_table)/2 - -cpu_setup_end: - nop - - movl %ebp, %eax /* Restore bist */ diff --git a/src/cpu/amd/geode_gx1/geode_gx1_init.c b/src/cpu/amd/geode_gx1/geode_gx1_init.c deleted file mode 100644 index 8fbf507..0000000 --- a/src/cpu/amd/geode_gx1/geode_gx1_init.c +++ /dev/null @@ -1,100 +0,0 @@ -#include <console/console.h> -#include <device/device.h> -#include <string.h> -#include <cpu/cpu.h> -#include <cpu/x86/lapic.h> -#include <cpu/x86/cache.h> - -#if 0 -#include <cpu/amd/gx1def.h> -#include <arch/io.h> - -static void gx1_cpu_setup(void) -{ - unsigned char rreg; - unsigned char cpu_table[] = { - 0xc1, 0x00, /* NO SMIs */ - 0xc3, 0x14, /* Enable CPU config register */ - 0x20, 0x00, /* */ - 0xb8, GX_BASE>>30, /* Enable GXBASE address */ - 0xc2, 0x00, - 0xe8, 0x98, - 0xc3, 0xf8, /* Enable CPU config register */ - 0x00, 0x00 - }; - unsigned char *cPtr = cpu_table; - - while(rreg = *cPtr++) { - unsigned char rval = *cPtr++; - outb(rreg, 0x22); - outb(rval, 0x23); - } - - outb(0xff, 0x22); /* DIR1 -- Identification register 1 */ - if(inb(0x23) > 0x63) { /* Rev greater than R3 */ - outb(0xe8, 0x22); - outb(inb(0x23) | 0x20, 0x23); /* Enable FPU Fast Mode */ - - outb(0xf0, 0x22); - outb(inb(0x23) | 0x02, 0x23); /* Incrementor on */ - - outb(0x20, 0x22); - outb(inb(0x23) | 0x24, 0x23); /* Bit 5 must be on */ - /* Bit 2 Incrementor margin 10 */ - - } -} - -static void gx1_gx_setup(void) -{ -unsigned long gx_setup_table[] = { - GX_BASE + DC_UNLOCK, DC_UNLOCK_MAGIC, - GX_BASE + DC_GENERAL_CFG, 0, - GX_BASE + DC_UNLOCK, 0, - GX_BASE + BC_DRAM_TOP, 0x3fffffff, - GX_BASE + BC_XMAP_1, 0x60, - GX_BASE + BC_XMAP_2, 0, - GX_BASE + BC_XMAP_3, 0, - GX_BASE + MC_BANK_CFG, 0x00700070, - GX_BASE + MC_MEM_CNTRL1, XBUSARB, - GX_BASE + MC_GBASE_ADD, 0xff, - 0, 0 - }; - -unsigned long *gxPtr = gx_setup_table; -unsigned long *gxdPtr; -unsigned long addr; - - while(addr = *gxPtr++) { - gxdPtr = (unsigned long *)addr; - *gxdPtr = *gxPtr++; - } -} -#endif - -static void geode_gx1_init(device_t dev) -{ -#if 0 - gx1_cpu_setup(); - gx1_gx_setup(); -#endif - /* Turn on caching if we haven't already */ - x86_enable_cache(); - - /* Enable the local cpu apics */ - setup_lapic(); -}; - -static struct device_operations cpu_dev_ops = { - .init = geode_gx1_init, -}; - -static struct cpu_device_id cpu_table[] = { - { X86_VENDOR_CYRIX, 0x0540 }, - { 0, 0 }, -}; - -static const struct cpu_driver driver __cpu_driver = { - .ops = &cpu_dev_ops, - .id_table = cpu_table, -}; diff --git a/src/cpu/amd/geode_gx1/gx_setup.inc b/src/cpu/amd/geode_gx1/gx_setup.inc deleted file mode 100644 index 6d0e289..0000000 --- a/src/cpu/amd/geode_gx1/gx_setup.inc +++ /dev/null @@ -1,47 +0,0 @@ -/* - freebios/src/northbridge/nsc/gx1/gx_setup.inc - - Copyright (c) 2002 Christer Weinigel wingel@hack.org - - Setup the GX_BASE registers on a National Semiconductor Geode CPU -*/ - -#include <cpu/amd/gx1def.h> - - movl %eax, %ebp /* Preserve bist */ - -gx_setup_start: - leal gx_setup_table, %esi - movl $gx_setup_len, %ecx - movl $GX_BASE, %edi - -gx_setup_loop: - movw (%esi), %di /* Only read the low word of address */ - addl $4, %esi - movl (%esi), %eax /* Data */ - addl $4, %esi - movl %eax, (%edi) - loop gx_setup_loop - - jmp gx_setup_end - -gx_setup_table: - /* Allow writes to config registers */ - .long DC_UNLOCK, DC_UNLOCK_MAGIC - .long DC_GENERAL_CFG, 0 - .long DC_UNLOCK, 0 - - .long BC_DRAM_TOP, 0x3fffffff - .long BC_XMAP_1, 0x60 - .long BC_XMAP_2, 0 - .long BC_XMAP_3, 0 - - .long MC_BANK_CFG, 0x00700070 /* No DIMMS installed */ - .long MC_MEM_CNTRL1, XBUSARB - .long MC_GBASE_ADD, 0x7ff /* Almost 1GB */ -gx_setup_len = (.-gx_setup_table)/8 - -gx_setup_end: - nop - - movl %ebp, %eax /* Restore bist */ diff --git a/src/include/cpu/amd/gx1def.h b/src/include/cpu/amd/gx1def.h deleted file mode 100644 index ee36a68..0000000 --- a/src/include/cpu/amd/gx1def.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - freebios/src/northbridge/nsc/gx1/gx1def.inc - - Copyright (c) 2002 Christer Weinigel wingel@hack.org - - Defines for the GX1 processor -*/ - -#define GX_BASE 0x040000000 - -/**********************************************************************/ -/* Display Controller Registers, offset from GX_BASE */ - -#define DC_UNLOCK 0x8300 -#define DC_UNLOCK_MAGIC 0x4758 - -#define DC_GENERAL_CFG 0x8304 - -/**********************************************************************/ -/* Bus Controller Registers, offset from GX_BASE */ - -#define BC_DRAM_TOP 0x8000 - -#define BC_XMAP_1 0x8004 -#define BC_XMAP_2 0x8008 -#define BC_XMAP_3 0x800c - -/**********************************************************************/ -/* Memory Controller Registers, offset from GX_BASE */ - -#define MC_MEM_CNTRL1 0x8400 -#define SDCLKSTRT (1<<17) -#define RFSHRATE (0x1ff<<8) -#define RFSHSTAG (0x3<<6) -#define X2CLKADDR (1<<5) -#define RFSHTST (1<<4) -#define XBUSARB (1<<3) -#define SMM_MAP (1<<2) -#define PROGRAM_SDRAM (1<<0) - -#define MC_MEM_CNTRL2 0x8404 -#define SDCLK_MASK 0x000003c0 -#define SDCLKOUT_MASK 0x00000400 - -#define MC_BANK_CFG 0x8408 -#define DIMM_PG_SZ 0x00000070 -#define DIMM_SZ 0x00000700 -#define DIMM_COMP_BNK 0x00001000 -#define DIMM_MOD_BNK 0x00004000 - -#define MC_SYNC_TIM1 0x840c - -#define MC_GBASE_ADD 0x8414 - diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig index 29b439c..6ba6b71 100644 --- a/src/mainboard/Kconfig +++ b/src/mainboard/Kconfig @@ -12,8 +12,6 @@ config VENDOR_ADLINK bool "ADLINK" config VENDOR_ADVANSUS bool "Advansus" -config VENDOR_ADVANTECH - bool "Advantech" config VENDOR_AMD bool "AMD" config VENDOR_AOPEN @@ -24,8 +22,6 @@ config VENDOR_ARIMA bool "Arima" config VENDOR_ARTECGROUP bool "Artec Group" -config VENDOR_ASI - bool "ASI" config VENDOR_ASROCK bool "ASROCK" config VENDOR_ASUS @@ -34,8 +30,6 @@ config VENDOR_A_TREND bool "A-Trend" config VENDOR_AVALUE bool "AVALUE" -config VENDOR_AXUS - bool "AXUS" config VENDOR_AZZA bool "AZZA" config VENDOR_BACHMANN @@ -56,8 +50,6 @@ config VENDOR_DIGITALLOGIC bool "DIGITAL-LOGIC" config VENDOR_DMP bool "DMP" -config VENDOR_EAGLELION - bool "EagleLion" config VENDOR_ECS bool "ECS" config VENDOR_EMULATION @@ -130,8 +122,6 @@ config VENDOR_TECHNEXION bool "Technexion" config VENDOR_TECHNOLOGIC bool "Technologic" -config VENDOR_TELEVIDEO - bool "TeleVideo" config VENDOR_TI bool "TI" config VENDOR_THOMSON @@ -154,17 +144,14 @@ source "src/mainboard/aaeon/Kconfig" source "src/mainboard/abit/Kconfig" source "src/mainboard/adlink/Kconfig" source "src/mainboard/advansus/Kconfig" -source "src/mainboard/advantech/Kconfig" source "src/mainboard/amd/Kconfig" source "src/mainboard/aopen/Kconfig" source "src/mainboard/apple/Kconfig" source "src/mainboard/arima/Kconfig" source "src/mainboard/artecgroup/Kconfig" -source "src/mainboard/asi/Kconfig" source "src/mainboard/asrock/Kconfig" source "src/mainboard/asus/Kconfig" source "src/mainboard/avalue/Kconfig" -source "src/mainboard/axus/Kconfig" source "src/mainboard/azza/Kconfig" source "src/mainboard/bachmann/Kconfig" source "src/mainboard/bcom/Kconfig" @@ -175,7 +162,6 @@ source "src/mainboard/compaq/Kconfig" source "src/mainboard/cubietech/Kconfig" source "src/mainboard/digitallogic/Kconfig" source "src/mainboard/dmp/Kconfig" -source "src/mainboard/eaglelion/Kconfig" source "src/mainboard/ecs/Kconfig" source "src/mainboard/emulation/Kconfig" source "src/mainboard/getac/Kconfig" @@ -212,7 +198,6 @@ source "src/mainboard/sunw/Kconfig" source "src/mainboard/supermicro/Kconfig" source "src/mainboard/technexion/Kconfig" source "src/mainboard/technologic/Kconfig" -source "src/mainboard/televideo/Kconfig" source "src/mainboard/thomson/Kconfig" source "src/mainboard/ti/Kconfig" source "src/mainboard/traverse/Kconfig" diff --git a/src/mainboard/advantech/Kconfig b/src/mainboard/advantech/Kconfig deleted file mode 100644 index ab46f96..0000000 --- a/src/mainboard/advantech/Kconfig +++ /dev/null @@ -1,35 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if VENDOR_ADVANTECH - -choice - prompt "Mainboard model" - -config BOARD_ADVANTECH_PCM_5820 - bool "PCM-5820" - -endchoice - -source "src/mainboard/advantech/pcm-5820/Kconfig" - -config MAINBOARD_VENDOR - string - default "Advantech" - -endif # VENDOR_ADVANTECH diff --git a/src/mainboard/advantech/pcm-5820/Kconfig b/src/mainboard/advantech/pcm-5820/Kconfig deleted file mode 100644 index 86bcd7a..0000000 --- a/src/mainboard/advantech/pcm-5820/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ADVANTECH_PCM_5820 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_WINBOND_W83977F - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default advantech/pcm-5820 - -config MAINBOARD_PART_NUMBER - string - default "PCM-5820" - -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_ADVANTECH_PCM_5820 diff --git a/src/mainboard/advantech/pcm-5820/board_info.txt b/src/mainboard/advantech/pcm-5820/board_info.txt deleted file mode 100644 index 84b3c8d..0000000 --- a/src/mainboard/advantech/pcm-5820/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: half -Board URL: http://taiwan.advantech.com.tw/products/Model_Detail.asp?model_id=1-1TGZL8 -ROM package: PLCC32 -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/advantech/pcm-5820/devicetree.cb b/src/mainboard/advantech/pcm-5820/devicetree.cb deleted file mode 100644 index 8027ee2..0000000 --- a/src/mainboard/advantech/pcm-5820/devicetree.cb +++ /dev/null @@ -1,56 +0,0 @@ -chip northbridge/amd/gx1 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 12.0 on # ISA bridge - chip superio/winbond/w83977f # SUper I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.4 on # RTC / On-Now control - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 3f0.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # IR - # TODO? - end - device pnp 3f0.7 on # GPIO 1 - # TODO? - end - device pnp 3f0.8 on # GPIO 2 - # TODO? - end - end - end - device pci 12.1 on end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio (onboard) - device pci 12.4 on end # VGA - device pci 13.0 on end # USB - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end - chip cpu/amd/geode_gx1 # CPU - end -end diff --git a/src/mainboard/advantech/pcm-5820/irq_tables.c b/src/mainboard/advantech/pcm-5820/irq_tables.c deleted file mode 100644 index ac25227..0000000 --- a/src/mainboard/advantech/pcm-5820/irq_tables.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x12 << 3) | 0x0, /* Interrupt router device */ - 0xc00, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x2, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xde, /* Checksum */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x0b << 3) | 0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, - {0x00, (0x13 << 3) | 0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/advantech/pcm-5820/romstage.c b/src/mainboard/advantech/pcm-5820/romstage.c deleted file mode 100644 index a6b856e..0000000 --- a/src/mainboard/advantech/pcm-5820/romstage.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "northbridge/amd/gx1/raminit.c" -#include "cpu/x86/bist.h" -#include "superio/winbond/w83977f/early_serial.c" -#include "southbridge/amd/cs5530/enable_rom.c" - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977F_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - w83977f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/asi/Kconfig b/src/mainboard/asi/Kconfig deleted file mode 100644 index 29f0895..0000000 --- a/src/mainboard/asi/Kconfig +++ /dev/null @@ -1,38 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if VENDOR_ASI - -choice - prompt "Mainboard model" - -config BOARD_ASI_MB_5BLGP - bool "MB-5BLGP" -config BOARD_ASI_MB_5BLMP - bool "MB-5BLMP" - -endchoice - -source "src/mainboard/asi/mb_5blgp/Kconfig" -source "src/mainboard/asi/mb_5blmp/Kconfig" - -config MAINBOARD_VENDOR - string - default "ASI" - -endif # VENDOR_ASI diff --git a/src/mainboard/asi/mb_5blgp/Kconfig b/src/mainboard/asi/mb_5blgp/Kconfig deleted file mode 100644 index f69f6ef..0000000 --- a/src/mainboard/asi/mb_5blgp/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASI_MB_5BLGP - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_NSC_PC87351 - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default asi/mb_5blgp - -config MAINBOARD_PART_NUMBER - string - default "MB-5BLGP" - -config IRQ_SLOT_COUNT - int - default 3 - -endif # BOARD_ASI_MB_5BLGP diff --git a/src/mainboard/asi/mb_5blgp/board_info.txt b/src/mainboard/asi/mb_5blgp/board_info.txt deleted file mode 100644 index 0dcbbea..0000000 --- a/src/mainboard/asi/mb_5blgp/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Board name: MB-5BLGP (Neoware Eon 4000s) -Category: settop diff --git a/src/mainboard/asi/mb_5blgp/devicetree.cb b/src/mainboard/asi/mb_5blgp/devicetree.cb deleted file mode 100644 index d84bf0e..0000000 --- a/src/mainboard/asi/mb_5blgp/devicetree.cb +++ /dev/null @@ -1,55 +0,0 @@ -chip northbridge/amd/gx1 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 0f.0 on end # Ethernet - device pci 12.0 on # ISA bridge - chip superio/nsc/pc87351 # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.e on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 on # System wake-up control (SWC) - irq 0x60 = 0x500 - end - device pnp 2e.5 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.6 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 on # GPIO - irq 0x60 = 0x800 - end - device pnp 2e.8 on # Fan speed control - irq 0x60 = 0x900 - end - end - end - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA - device pci 13.0 on end # USB - register "ide0_enable" = "1" - register "ide1_enable" = "0" # No connector on this board - end - end - chip cpu/amd/geode_gx1 # CPU - end -end diff --git a/src/mainboard/asi/mb_5blgp/irq_tables.c b/src/mainboard/asi/mb_5blgp/irq_tables.c deleted file mode 100644 index b37e8f9..0000000 --- a/src/mainboard/asi/mb_5blgp/irq_tables.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x12 << 3) | 0x0, /* Interrupt router device */ - 0x8800, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x2, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x96, /* Checksum */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x07 << 3) | 0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, /* ISA slot (?) */ - {0x00, (0x0f << 3) | 0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0}, /* NIC */ - {0x00, (0x13 << 3) | 0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, /* USB */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asi/mb_5blgp/romstage.c b/src/mainboard/asi/mb_5blgp/romstage.c deleted file mode 100644 index 43c5cf7..0000000 --- a/src/mainboard/asi/mb_5blgp/romstage.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "northbridge/amd/gx1/raminit.c" -#include "cpu/x86/bist.h" -#include "superio/nsc/pc87351/early_serial.c" -#include "southbridge/amd/cs5530/enable_rom.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC87351_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - pc87351_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/asi/mb_5blmp/Kconfig b/src/mainboard/asi/mb_5blmp/Kconfig deleted file mode 100644 index a40c86c..0000000 --- a/src/mainboard/asi/mb_5blmp/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASI_MB_5BLMP - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_NSC_PC87351 - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default asi/mb_5blmp - -config MAINBOARD_PART_NUMBER - string - default "MB-5BLMP" - -config IRQ_SLOT_COUNT - int - default 5 - -endif # BOARD_ASI_MB_5BLMP diff --git a/src/mainboard/asi/mb_5blmp/board_info.txt b/src/mainboard/asi/mb_5blmp/board_info.txt deleted file mode 100644 index da529cb..0000000 --- a/src/mainboard/asi/mb_5blmp/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: MB-5BLMP (IGEL WinNET III) -Category: settop -Board URL: http://www.hojerteknik.com/winnet.htm -Flashrom support: y diff --git a/src/mainboard/asi/mb_5blmp/devicetree.cb b/src/mainboard/asi/mb_5blmp/devicetree.cb deleted file mode 100644 index e8e6ac3..0000000 --- a/src/mainboard/asi/mb_5blmp/devicetree.cb +++ /dev/null @@ -1,48 +0,0 @@ -chip northbridge/amd/gx1 # Northbridge - device domain 0 on - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 0f.0 off end # Ethernet (Realtek RTL8139B) - device pci 12.0 on # ISA bridge - chip superio/nsc/pc87351 # Super I/O - device pnp 2e.4 on # PS/2 keyboard (+ mouse?) - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - # irq 0x72 = 12 - end - device pnp 2e.a on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.e on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.f off # Floppy - io 0x60 = 0x3f2 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.10 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.12 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - end - end - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA (onboard) - device pci 13.0 on end # USB - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end - chip cpu/amd/geode_gx1 # CPU - end -end - diff --git a/src/mainboard/asi/mb_5blmp/irq_tables.c b/src/mainboard/asi/mb_5blmp/irq_tables.c deleted file mode 100644 index 01d364d..0000000 --- a/src/mainboard/asi/mb_5blmp/irq_tables.c +++ /dev/null @@ -1,39 +0,0 @@ -/* TODO: This is currently copied from the IEI NOVA-4899R target, but it's - * quite surely wrong for this board. It gets me further in the boot process - * than using no irq_tables.c file at all, though! - */ - -/* TODO: Add license header. */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0xe00, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x0002, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x2d, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - // USB - {0x00,(0x13<<3)|0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, - // eth0 - {0x00,(0x0a<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0},//0x3, 0x0}, - // eth1 - {0x00,(0x0b<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x02, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0},//0x2, 0x0}, - // eth2 - {0x00,(0x0c<<3)|0x0, {{0x04, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0},//0x1, 0x0}, - // PCI slot - {0x00,(0x0f<<3)|0x0, {{0x04, 0xdeb8}, {0x03, 0xdeb8}, {0x02, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asi/mb_5blmp/romstage.c b/src/mainboard/asi/mb_5blmp/romstage.c deleted file mode 100644 index 1fb3378..0000000 --- a/src/mainboard/asi/mb_5blmp/romstage.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "northbridge/amd/gx1/raminit.c" -#include "superio/nsc/pc87351/early_serial.c" -#include "cpu/x86/bist.h" -#include "southbridge/amd/cs5530/enable_rom.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC87351_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - pc87351_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/axus/Kconfig b/src/mainboard/axus/Kconfig deleted file mode 100644 index cdf807f..0000000 --- a/src/mainboard/axus/Kconfig +++ /dev/null @@ -1,35 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if VENDOR_AXUS - -choice - prompt "Mainboard model" - -config BOARD_AXUS_TC320 - bool "TC320" - -endchoice - -source "src/mainboard/axus/tc320/Kconfig" - -config MAINBOARD_VENDOR - string - default "AXUS" - -endif # VENDOR_AXUS diff --git a/src/mainboard/axus/tc320/Kconfig b/src/mainboard/axus/tc320/Kconfig deleted file mode 100644 index 97c33aa..0000000 --- a/src/mainboard/axus/tc320/Kconfig +++ /dev/null @@ -1,46 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_AXUS_TC320 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_NSC_PC97317 - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default axus/tc320 - -config MAINBOARD_PART_NUMBER - string - default "TC320" - -# Soldered NIC, internal USB, no real PCI slots. -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_AXUS_TC320 diff --git a/src/mainboard/axus/tc320/board_info.txt b/src/mainboard/axus/tc320/board_info.txt deleted file mode 100644 index 005c28d..0000000 --- a/src/mainboard/axus/tc320/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: settop -Board URL: http://www.keyton.co.jp/products/UAXT/TC-320.html diff --git a/src/mainboard/axus/tc320/devicetree.cb b/src/mainboard/axus/tc320/devicetree.cb deleted file mode 100644 index 970f71f..0000000 --- a/src/mainboard/axus/tc320/devicetree.cb +++ /dev/null @@ -1,55 +0,0 @@ -chip northbridge/amd/gx1 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 12.0 on # ISA bridge - chip superio/nsc/pc97317 # Super I/O - device pnp 2e.0 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.1 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.2 on # RTC, advanced power control (APC) - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 2e.3 off # Floppy (N/A on this board) - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.4 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.5 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0xe0 - end - device pnp 2e.8 on # Power management - io 0x60 = 0xe800 - end - end - end - device pci 12.1 off end # SMI - device pci 12.2 off end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA (onboard) - device pci 13.0 on end # USB - # register "ide0_enable" = "1" - # register "ide1_enable" = "1" - end - end - chip cpu/amd/geode_gx1 # CPU - end -end diff --git a/src/mainboard/axus/tc320/irq_tables.c b/src/mainboard/axus/tc320/irq_tables.c deleted file mode 100644 index 71cf2e1..0000000 --- a/src/mainboard/axus/tc320/irq_tables.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Juergen Beisert juergen@kreuzholzen.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * Interrupt routing description for the AXUS TC320 board. - * It was not possible to read back the PIRQ table. There was no BIOS to ask - * for it, only a bootloader for an embedded OS. - * But with the method described here: - * http://coreboot.org/Creating_Valid_IRQ_Tables - * it was possible to detect the physical IRQ routing on this board. - * - * This is the physical routing on this board: - * - * IRQ 5530 USB Network - * controller northbridge device device - * 00.13.0 00.0e.00 - * -------------------------------------------- - * 11 INTA# INTA# n.c. - * 15 INTB# n.c. INTA# - * INTC# n.c. n.c. - * INTD# n.c. n.c. - */ - -#include <arch/pirq_routing.h> - -#define INT_A 0x01 -#define INT_B 0x02 -#define INT_C 0x03 -#define INT_D 0x04 - -/* - * The USB controller should be connected to IRQ11, - * the network controller should be connected to IRQ15. - */ - -#define IRQ_BITMAP_LINK0 0x0800 -#define IRQ_BITMAP_LINK1 0x8000 -#define IRQ_BITMAP_LINK2 0x0000 -#define IRQ_BITMAP_LINK3 0x0000 - -/** Reserved interrupt channels for exclusive PCI usage. */ -#define IRQ_DEVOTED_TO_PCI (IRQ_BITMAP_LINK0 | IRQ_BITMAP_LINK1) - -/** - * Routing description. - * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx - */ -static const struct irq_routing_table intel_irq_routing_table = { - .signature = PIRQ_SIGNATURE, /* PIRQ signature */ - .version = PIRQ_VERSION, /* PIRQ version */ - .size = 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. CONFIG_IRQ_SLOT_COUNT devices */ - .rtr_bus = 0x00, /* Interrupt router bus */ - .rtr_devfn = (0x12 << 3) | 0x0, /* Interrupt router device */ - .exclusive_irqs = IRQ_DEVOTED_TO_PCI, /* IRQs devoted to PCI */ - .rtr_vendor = 0x1078, /* Vendor */ - .rtr_device = 0x0100, /* Device */ - .miniport_data = 0, /* Miniport data */ - .checksum = 0xe3, /* Checksum */ - .slots = { - /* - * Definition for "slot#1". There is no real slot, - * the USB device is embedded... - */ - [0] = { - .bus = 0x00, - .devfn = (0x13 << 3) | 0x0, - .irq = { - /* Link Bitmap */ - [0] = { INT_A, IRQ_BITMAP_LINK0 }, - [1] = { INT_B, IRQ_BITMAP_LINK1 }, - [2] = { INT_C, IRQ_BITMAP_LINK2 }, - [3] = { INT_D, IRQ_BITMAP_LINK3 }, - }, - .slot = 0x0, - }, - /* - * Definition for "slot#2". There is no real slot, - * the network device is soldered... - */ - [1] = { - .bus = 0x00, - .devfn = (0x0e << 3) | 0x0, - .irq = { - /* Link Bitmap */ - [0] = { INT_B, IRQ_BITMAP_LINK1 }, - [1] = { INT_C, IRQ_BITMAP_LINK2 }, - [2] = { INT_D, IRQ_BITMAP_LINK3 }, - [3] = { INT_A, IRQ_BITMAP_LINK0 }, - }, - .slot = 0x0, - } - } -}; - -/** - * Copy the IRQ routing table to memory. - * - * @param[in] addr Destination address (between 0xF0000...0x100000). - * @return TODO. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/axus/tc320/romstage.c b/src/mainboard/axus/tc320/romstage.c deleted file mode 100644 index 15362e3..0000000 --- a/src/mainboard/axus/tc320/romstage.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Juergen Beisert juergen@kreuzholzen.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "northbridge/amd/gx1/raminit.c" -#include "superio/nsc/pc97317/early_serial.c" -#include "cpu/x86/bist.h" -#include "southbridge/amd/cs5530/enable_rom.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC97317_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - pc97317_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/bcom/Kconfig b/src/mainboard/bcom/Kconfig index 60945d6..5c7e41b 100644 --- a/src/mainboard/bcom/Kconfig +++ b/src/mainboard/bcom/Kconfig @@ -21,14 +21,11 @@ if VENDOR_BCOM choice prompt "Mainboard model"
-config BOARD_BCOM_WINNET100 - bool "WinNET100" config BOARD_BCOM_WINNETP680 bool "WinNET P680"
endchoice
-source "src/mainboard/bcom/winnet100/Kconfig" source "src/mainboard/bcom/winnetp680/Kconfig"
config MAINBOARD_VENDOR diff --git a/src/mainboard/bcom/winnet100/Kconfig b/src/mainboard/bcom/winnet100/Kconfig deleted file mode 100644 index 503c92b..0000000 --- a/src/mainboard/bcom/winnet100/Kconfig +++ /dev/null @@ -1,46 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_BCOM_WINNET100 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_NSC_PC97317 - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default bcom/winnet100 - -config MAINBOARD_PART_NUMBER - string - default "WinNET100" - -# Soldered NIC, internal USB, no real PCI slots. -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_BCOM_WINNET100 diff --git a/src/mainboard/bcom/winnet100/board_info.txt b/src/mainboard/bcom/winnet100/board_info.txt deleted file mode 100644 index 85e561a..0000000 --- a/src/mainboard/bcom/winnet100/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: settop -Board name: WinNET100 (IGEL-316) -Board URL: http://web.archive.org/web/20031207003521/http://www.igel.co.za/igel_316_com... -Flashrom support: y diff --git a/src/mainboard/bcom/winnet100/devicetree.cb b/src/mainboard/bcom/winnet100/devicetree.cb deleted file mode 100644 index 61a71e6..0000000 --- a/src/mainboard/bcom/winnet100/devicetree.cb +++ /dev/null @@ -1,56 +0,0 @@ -chip northbridge/amd/gx1 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 0f.0 on end # Ethernet (onboard) - device pci 12.0 on # ISA bridge - chip superio/nsc/pc97317 # Super I/O - device pnp 2e.0 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.1 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.2 on # RTC, Advanced power control (APC) - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 2e.3 off # Floppy (N/A on this board) - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.4 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.5 on # COM2 (used for smartcard reader) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0xe0 - end - device pnp 2e.8 on # Power management - io 0x60 = 0xe8 - end - end - end - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA (onboard) - device pci 13.0 on end # USB - register "ide0_enable" = "1" - register "ide1_enable" = "0" # Not available/needed on this board - end - end - chip cpu/amd/geode_gx1 # CPU - end -end diff --git a/src/mainboard/bcom/winnet100/irq_tables.c b/src/mainboard/bcom/winnet100/irq_tables.c deleted file mode 100644 index 8d9e157..0000000 --- a/src/mainboard/bcom/winnet100/irq_tables.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Juergen Beisert juergen@kreuzholzen.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * Interrupt routing description for BCOM's Winnet100 board. - * It was not possible to read back the pirq-Table. In the 0xF segment was - * no string like $PIRQ... - * But the already running 2.4.21 kernel provides eth0 IRQ15 and USB IRQ 11. - * The Realtek was device 0.f.0, the USB 0.13.0. - * - * This is the physical routing on this board: - * - * 5530 USB Network - * northbridge device device - * 00.13.0 00.0f.00 - * ------------------------------------ - * INTA# INTA# n.c. - * INTB# n.c. n.c. - * INTC# n.c. INTA# - * INTD# n.c. n.c. - */ - -#include <arch/pirq_routing.h> - -#define INT_A 0x01 -#define INT_B 0x02 -#define INT_C 0x03 -#define INT_D 0x04 - -/* - * The USB controller should be connected to IRQ11, - * the network controller should be connected to IRQ15. - */ -#define IRQ_BITMAP_LINK0 0x0800 -#define IRQ_BITMAP_LINK1 0x0400 -#define IRQ_BITMAP_LINK2 0x8000 -#define IRQ_BITMAP_LINK3 0x0200 - -/** Reserved interrupt channels for exclusive PCI usage. */ -#define IRQ_DEVOTED_TO_PCI (IRQ_BITMAP_LINK0 | IRQ_BITMAP_LINK2) - -/** - * Routing description. - * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx - */ -static const struct irq_routing_table intel_irq_routing_table = { - .signature = PIRQ_SIGNATURE, /* PIRQ signature */ - .version = PIRQ_VERSION, /* PIRQ version */ - .size = 32 +16 * CONFIG_IRQ_SLOT_COUNT,/* Max. CONFIG_IRQ_SLOT_COUNT devices */ - .rtr_bus = 0x00, /* Interrupt router bus */ - .rtr_devfn = (0x12 << 3) | 0x0, /* Interrupt router device */ - .exclusive_irqs = IRQ_DEVOTED_TO_PCI, /* IRQs devoted to PCI */ - .rtr_vendor = 0x1078, /* Vendor */ - .rtr_device = 0x0100, /* Device */ - .miniport_data = 0, /* Miniport data */ - .checksum = 0xbf + 16, /* Checksum */ - .slots = { - /* - * Definition for "slot#1". There is no real slot, - * the USB device is embedded... - */ - [0] = { - .bus = 0x00, - .devfn = (0x13 << 3) | 0x0, - .irq = { - /* Link Bitmap */ - [0] = { INT_A, IRQ_BITMAP_LINK0 }, - [1] = { INT_B, IRQ_BITMAP_LINK1 }, - [2] = { INT_C, IRQ_BITMAP_LINK2 }, - [3] = { INT_D, IRQ_BITMAP_LINK3 }, - }, - .slot = 0x0, - }, - - /* - * Definition for "slot#3". There is no real slot, - * the network device is soldered... - */ - [1] = { - .bus = 0x00, - .devfn = (0x0f << 3) | 0x0, - .irq = { - /* Link Bitmap */ - [0] = { INT_C, IRQ_BITMAP_LINK2 }, - [1] = { INT_D, IRQ_BITMAP_LINK3 }, - [2] = { INT_A, IRQ_BITMAP_LINK0 }, - [3] = { INT_B, IRQ_BITMAP_LINK1 }, - }, - .slot = 0x0, - } - } -}; - -/** - * Copy the IRQ routing table to memory. - * - * @param[in] addr Destination address (between 0xF0000...0x100000). - * @return TODO. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/bcom/winnet100/romstage.c b/src/mainboard/bcom/winnet100/romstage.c deleted file mode 100644 index 15362e3..0000000 --- a/src/mainboard/bcom/winnet100/romstage.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Juergen Beisert juergen@kreuzholzen.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "northbridge/amd/gx1/raminit.c" -#include "superio/nsc/pc97317/early_serial.c" -#include "cpu/x86/bist.h" -#include "southbridge/amd/cs5530/enable_rom.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC97317_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - pc97317_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/bifferos/bifferboard/romstage.c b/src/mainboard/bifferos/bifferboard/romstage.c index dd2553e..c695eb7 100644 --- a/src/mainboard/bifferos/bifferboard/romstage.c +++ b/src/mainboard/bifferos/bifferboard/romstage.c @@ -18,12 +18,7 @@ */
#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> #include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <pc80/mc146818rtc.h> #include <console/console.h> #include <cpu/x86/cache.h>
diff --git a/src/mainboard/eaglelion/5bcm/Kconfig b/src/mainboard/eaglelion/5bcm/Kconfig deleted file mode 100644 index 3c0a800..0000000 --- a/src/mainboard/eaglelion/5bcm/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_EAGLELION_5BCM - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_NSC_PC97317 - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default eaglelion/5bcm - -config MAINBOARD_PART_NUMBER - string - default "5BCM" - -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_EAGLELION_5BCM diff --git a/src/mainboard/eaglelion/5bcm/board_info.txt b/src/mainboard/eaglelion/5bcm/board_info.txt deleted file mode 100644 index 7680e6f..0000000 --- a/src/mainboard/eaglelion/5bcm/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: half diff --git a/src/mainboard/eaglelion/5bcm/cmos.layout b/src/mainboard/eaglelion/5bcm/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/eaglelion/5bcm/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/eaglelion/5bcm/devicetree.cb b/src/mainboard/eaglelion/5bcm/devicetree.cb deleted file mode 100644 index 33f1f90..0000000 --- a/src/mainboard/eaglelion/5bcm/devicetree.cb +++ /dev/null @@ -1,52 +0,0 @@ -chip northbridge/amd/gx1 - device domain 0 on - device pci 0.0 on end - chip southbridge/amd/cs5530 - device pci 12.0 on - chip superio/nsc/pc97317 - device pnp 2e.0 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.1 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.2 on # RTC - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 2e.3 off # FDC - end - device pnp 2e.4 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.5 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0xe0 - end - device pnp 2e.8 on # Power Management - io 0x60 = 0xe800 - end - end - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 off end # Audio - device pci 12.4 off end # VGA - end - end - end - - chip cpu/amd/geode_gx1 - end - -end - diff --git a/src/mainboard/eaglelion/5bcm/irq_tables.c b/src/mainboard/eaglelion/5bcm/irq_tables.c deleted file mode 100644 index 95f67bc..0000000 --- a/src/mainboard/eaglelion/5bcm/irq_tables.c +++ /dev/null @@ -1,31 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0x800, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x2, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/eaglelion/5bcm/romstage.c b/src/mainboard/eaglelion/5bcm/romstage.c deleted file mode 100644 index 28ddcc5..0000000 --- a/src/mainboard/eaglelion/5bcm/romstage.c +++ /dev/null @@ -1,23 +0,0 @@ -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "superio/nsc/pc97317/early_serial.c" -#include "cpu/x86/bist.h" -#include "southbridge/amd/cs5530/enable_rom.c" -#include "northbridge/amd/gx1/raminit.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC97317_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - pc97317_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/eaglelion/Kconfig b/src/mainboard/eaglelion/Kconfig deleted file mode 100644 index 8729c6c..0000000 --- a/src/mainboard/eaglelion/Kconfig +++ /dev/null @@ -1,35 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if VENDOR_EAGLELION - -choice - prompt "Mainboard model" - -config BOARD_EAGLELION_5BCM - bool "5BCM" - -endchoice - -source "src/mainboard/eaglelion/5bcm/Kconfig" - -config MAINBOARD_VENDOR - string - default "EagleLion" - -endif # VENDOR_EAGLELION diff --git a/src/mainboard/iei/Kconfig b/src/mainboard/iei/Kconfig index 014626a..d6578de 100644 --- a/src/mainboard/iei/Kconfig +++ b/src/mainboard/iei/Kconfig @@ -21,14 +21,8 @@ if VENDOR_IEI choice prompt "Mainboard model"
-config BOARD_IEI_JUKI_511P - bool "JUKI-511P" -config BOARD_IEI_ROCKY_512 - bool "ROCKY-512" config BOARD_IEI_KINO_FAM10 bool "Kino-780AM2(Fam10)" -config BOARD_IEI_NOVA_4899R - bool "NOVA-4899R" config BOARD_IEI_PCISA_LX_800_R10 bool "PCISA LX-800-R10" config BOARD_IEI_PM_LX_800_R11 @@ -38,10 +32,7 @@ config BOARD_IEI_PM_LX2_800_R10
endchoice
-source "src/mainboard/iei/juki-511p/Kconfig" -source "src/mainboard/iei/rocky-512/Kconfig" source "src/mainboard/iei/kino-780am2-fam10/Kconfig" -source "src/mainboard/iei/nova4899r/Kconfig" source "src/mainboard/iei/pcisa-lx-800-r10/Kconfig" source "src/mainboard/iei/pm-lx-800-r11/Kconfig" source "src/mainboard/iei/pm-lx2-800-r10/Kconfig" diff --git a/src/mainboard/iei/juki-511p/Kconfig b/src/mainboard/iei/juki-511p/Kconfig deleted file mode 100644 index 0aebb03..0000000 --- a/src/mainboard/iei/juki-511p/Kconfig +++ /dev/null @@ -1,47 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_IEI_JUKI_511P || BOARD_IEI_ROCKY_512 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_WINBOND_W83977F - select ROMCC - select PIRQ_ROUTE - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default iei/juki-511p - -if BOARD_IEI_JUKI_511P -config MAINBOARD_PART_NUMBER - string - default "JUKI-511P" -endif # BOARD_IEI_JUKI_511P - -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_IEI_JUKI_511P || BOARD_IEI_ROCKY_512 diff --git a/src/mainboard/iei/juki-511p/board_info.txt b/src/mainboard/iei/juki-511p/board_info.txt deleted file mode 100644 index 3445599..0000000 --- a/src/mainboard/iei/juki-511p/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/en/news_content.asp?id=erbium/projectOBJ00150613 diff --git a/src/mainboard/iei/juki-511p/cmos.layout b/src/mainboard/iei/juki-511p/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/iei/juki-511p/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/iei/juki-511p/devicetree.cb b/src/mainboard/iei/juki-511p/devicetree.cb deleted file mode 100644 index 4706ff5..0000000 --- a/src/mainboard/iei/juki-511p/devicetree.cb +++ /dev/null @@ -1,57 +0,0 @@ -chip northbridge/amd/gx1 - device domain 0 on - device pci 0.0 on end - chip southbridge/amd/cs5530 - - device pci 12.0 on - chip superio/winbond/w83977f - device pnp 3f0.0 on # FDC - irq 0x70 = 6 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.4 on # RTC - io 0x60 = 0x070 - irq 0x70 = 8 - end - device pnp 3f0.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Int 1 for PS/2 keyboard - irq 0x72 = 12 # Int 12 for PS/2 mouse - end - device pnp 3f0.6 off # IR - end - device pnp 3f0.7 off # GPIO1 - end - device pnp 3f0.8 off # GPIO - end - end - device pci 12.1 on end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA onboard - - end - - device pci 0e.0 on end # ETH0 - device pci 13.0 on end # USB - - end - end - - chip cpu/amd/geode_gx1 - end - -end - diff --git a/src/mainboard/iei/juki-511p/irq_tables.c b/src/mainboard/iei/juki-511p/irq_tables.c deleted file mode 100644 index 7d8e800..0000000 --- a/src/mainboard/iei/juki-511p/irq_tables.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -#define IRQ_BITMAP_LINK0 0x0800 /* chipset's INTA# input should be routed to IRQ11 */ -#define IRQ_BITMAP_LINK1 0x0400 /* chipset's INTB# input should be routed to IRQ10 */ -#define IRQ_BITMAP_LINK2 0x0000 /* chipset's INTC# input should be routed to nothing (disabled) */ -#define IRQ_BITMAP_LINK3 0x0000 /* chipset's INTD# input should be routed to nothing (disabled) */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be a total of CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0xc00, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x2, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x57, /* u8 checksum. This has to be set to some - value that would give 0 after the sum of all - bytes for this structure (including checksum) */ - - .slots = { - [0] = { - .slot = 0x0, /* should be 0 when it is no real slot. My device is soldered */ - .bus = 0x00, - .devfn = (0x13<<3)|0x0, /* 0x13 is my USB OHCI */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = 0x01, /* 0x01 means its connected to INTA# input at chipset */ - .bitmap = IRQ_BITMAP_LINK0 - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = 0x02, /* 0x02 means its connected to INTB# input at chipset */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = 0x03, /* 0x03 means its connected to INTC# input at chipset */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = 0x04, /* 0x04 means its connected to INTD# input at chipset */ - .bitmap = IRQ_BITMAP_LINK3 - } - } - }, - - [1] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x0e<<3)|0x0, /* 0x0e is my Realtek Network device */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = 0x02, /* 0x02 means its connected to INTB# input at chipset */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = 0x03, /* 0x03 means its connected to INTC# input at chipset */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = 0x04, /* 0x04 means its connected to INTD# input at chipset */ - .bitmap = IRQ_BITMAP_LINK3 - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = 0x01, /* 0x01 means its connected to INTA# input at chipset */ - .bitmap = IRQ_BITMAP_LINK0 - } - } - } - } -}; - -/** - * Copy the IRQ routing table to memory. - * - * @param addr Destination address (between 0xF0000...0x100000). - * @return The end address of the pirq routing table in memory. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/juki-511p/romstage.c b/src/mainboard/iei/juki-511p/romstage.c deleted file mode 100644 index 1b8e952..0000000 --- a/src/mainboard/iei/juki-511p/romstage.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "superio/winbond/w83977f/early_serial.c" -#include "southbridge/amd/cs5530/enable_rom.c" -#include "cpu/x86/bist.h" -#include "drivers/pc80/udelay_io.c" -#include "northbridge/amd/gx1/raminit.c" - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977F_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - w83977f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - /* Disable Watchdog Timer. */ - inb(0x043); - inb(0x843); - - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/iei/nova4899r/Kconfig b/src/mainboard/iei/nova4899r/Kconfig deleted file mode 100644 index 8d0a9a4..0000000 --- a/src/mainboard/iei/nova4899r/Kconfig +++ /dev/null @@ -1,46 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_IEI_NOVA_4899R - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_WINBOND_W83977TF - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select HAVE_OPTION_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default iei/nova4899r - -config MAINBOARD_PART_NUMBER - string - default "NOVA-4899R" - -config IRQ_SLOT_COUNT - int - default 5 - -endif # BOARD_IEI_NOVA_4899R diff --git a/src/mainboard/iei/nova4899r/board_info.txt b/src/mainboard/iei/nova4899r/board_info.txt deleted file mode 100644 index 6ffdfbe..0000000 --- a/src/mainboard/iei/nova4899r/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.icpamerica.com/products/single_board_computers/5_25_NOVA/NOVA-489... diff --git a/src/mainboard/iei/nova4899r/cmos.layout b/src/mainboard/iei/nova4899r/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/iei/nova4899r/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/iei/nova4899r/devicetree.cb b/src/mainboard/iei/nova4899r/devicetree.cb deleted file mode 100644 index f27662e..0000000 --- a/src/mainboard/iei/nova4899r/devicetree.cb +++ /dev/null @@ -1,64 +0,0 @@ -chip northbridge/amd/gx1 - device domain 0 on - device pci 0.0 on end - chip southbridge/amd/cs5530 - device pci 0a.0 on end # ETH0 - device pci 0b.0 off end # ETH1 - device pci 0c.0 on end # ETH2 - device pci 0f.0 on end # PCI slot - device pci 12.0 on - chip superio/winbond/w83977tf - device pnp 2e.0 on # FDC - irq 0x70 = 6 - end - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.4 off # Reserved - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 0x01 # Int 1 for PS/2 keyboard - irq 0x72 = 0x0c # Int 12 for PS/2 mouse - end - device pnp 2e.6 on # IR - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.7 on # GAME/MIDI/GPIO1 - io 0x60 = 0x290 - end - device pnp 2e.8 on # GPIO2 - io 0x60 = 0x110 - end - device pnp 2e.9 on # GPIO3 - io 0x60 = 0x120 - end - device pnp 2e.A on # Power Management - io 0x60 = 0xe800 - end - end - device pci 12.1 on end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA onboard - end - device pci 13.0 on end # USB - end - end - - chip cpu/amd/geode_gx1 - end - -end - diff --git a/src/mainboard/iei/nova4899r/irq_tables.c b/src/mainboard/iei/nova4899r/irq_tables.c deleted file mode 100644 index 785e0f3..0000000 --- a/src/mainboard/iei/nova4899r/irq_tables.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Luis Correia luis.f.correia@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -/* - * IRQ 5530 USB Network Network Network free - * controller northbridge device device#0 device#1 device#2 slot - * 00.13.0 00.0a.00 00.0b.00 00.0c.00 00.0f.00 - * ------------------------------------------------------------------------ - * 14 INTA# INTA# n.c. n.c. n.c. INTA# - * 5 INTB# n.c. n.c. n.c. INTA# n.c. - * 10 INTC# n.c. n.c. INTA# n.c. n.c. - * 11 INTD# n.c. INTA# n.c. n.c. n.c. - */ - -/* - * - the USB controller should be connected to IRQ14 - * - the network controller #0 should be connected to IRQ11 - * - the network controller #1 should be connected to IRQ10 - * - the network controller #2 should be connected to IRQ5 - * - the additional PCI slot must share the IRQ with the internal USB - */ - -/* Bit 9 means IRQ 9 is available for this cs5530 INT input. */ -#define IRQ_BITMAP_LINK0 0x0200 -/* Bit 5 means IRQ 5 is available for this cs5530 INT input. */ -#define IRQ_BITMAP_LINK1 0x0020 -/* Bit 10 means IRQ10 is available for this cs5530 INT input. */ -#define IRQ_BITMAP_LINK2 0x0400 -/* Bit 11 means IRQ11 is available for this cs5530 INT input. */ -#define IRQ_BITMAP_LINK3 0x0800 - -static const struct irq_routing_table intel_irq_routing_table = { - .signature = PIRQ_SIGNATURE, /* u32 signature */ - .version = PIRQ_VERSION, /* u16 version */ - .size = 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total 4 devices on the bus */ - .rtr_bus = 0x00, /* Where the interrupt router lies (bus) */ - .rtr_devfn = (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - .exclusive_irqs = 0x4C20, /* IRQs devoted exclusively to PCI usage */ - .rtr_vendor = 0x1078, /* Vendor */ - .rtr_device = 0x0100, /* Device */ - .miniport_data = 0, /* Miniport data */ - .checksum = 0xBF+16, /* TODO! calculate correct sum ! */ -/* - * Definition for "slot#0". There is no real slot, - * the network device is soldered... - */ - .slots = { - [0] = { - .bus = 0x00, - .devfn = (0x0a<<3)|0x0, - .irq = { - [0] = { - .link = 0x03, /* INT C */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [1] = { - .link = 0x02, /* INT B */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [2] = { /* = device INTA output */ - .link = 0x01, /* INT A */ - .bitmap = IRQ_BITMAP_LINK0 - }, - [3] = { - .link = 0x04, /* = cs5530 INT D input */ - .bitmap = IRQ_BITMAP_LINK3 - } - }, - .slot = 0x3, /* soldered */ - }, -/* - * Definition for "slot#1". There is no real slot, - * the network device is soldered... - * - * Configuration is ommited on purpose in the attempt of solving the - * issue with IRQ panics (this is device is actually eth1). - - [1] = { - .bus = 0x00, - .devfn = (0x0b<<3)|0x0, - .irq = { - [0] = { - .link = 0x04, - .bitmap = IRQ_BITMAP_LINK3 - }, - [1] = { - .link = 0x03, - .bitmap = IRQ_BITMAP_LINK2 - }, - [2] = { - .link = 0x02, - .bitmap = IRQ_BITMAP_LINK1 - }, - [3] = { - .link = 0x01, - .bitmap = IRQ_BITMAP_LINK0 - } - }, - .slot = 0x2, - }, - */ - -/* - * Definition for "slot#2". There is no real slot, - * the network device is soldered... - */ - [2] = { - .bus = 0x00, - .devfn = (0x0c<<3)|0x0, - .irq = { - [0] = { - .link = 0x01, /* INT A */ - .bitmap = IRQ_BITMAP_LINK0 - }, - [1] = { - .link = 0x04, /* INT D */ - .bitmap = IRQ_BITMAP_LINK3 - }, - [2] = { /* = device INTA output */ - .link = 0x03, /* INT C */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [3] = { - .link = 0x02, /* = cs5530 INT B input */ - .bitmap = IRQ_BITMAP_LINK1 - } - }, - .slot = 0x1, /* soldered */ - }, -/* - * This is a free PCI slot. - */ - [3] = { - .bus = 0x00, - .devfn = (0x0f<<3)|0x0, - .irq = { - [0] = { /* = device INTA output */ - .link = 0x04, /* INT D */ - .bitmap = IRQ_BITMAP_LINK3 - }, - [1] = { - .link = 0x03, /* = cs5530 INT C input */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [2] = { - .link = 0x02, /* INT B */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [3] = { - .link = 0x01, /* INT A */ - .bitmap = IRQ_BITMAP_LINK0 - } - }, - .slot = 0x6, /* FIXME: should be not 0, as it defines a real slot */ - }, -/* - * Definition for "slot#3". There is no real slot, - * the USB device is embedded... - */ - [4] = { - .bus = 0x00, - .devfn = (0x13<<3)|0x0, - .irq = { - [0] = { - .link = 0x02, /* INT B */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [1] = { - .link = 0x01, /* INT A */ - .bitmap = IRQ_BITMAP_LINK0 - }, - [2] = { - .link = 0x04, /* INT D */ - .bitmap = IRQ_BITMAP_LINK3 - }, - [3] = { - .link = 0x03, /* INT C */ - .bitmap = IRQ_BITMAP_LINK2 - } - }, - .slot = 0x5, /* chip internal */ - } - } -}; - -/** - * Copy the IRQ routing table to memory. - * - * @param addr Destination address (between 0xF0000...0x100000). - * @return The end address of the pirq routing table in memory. - **/ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/nova4899r/romstage.c b/src/mainboard/iei/nova4899r/romstage.c deleted file mode 100644 index 2b6caf3..0000000 --- a/src/mainboard/iei/nova4899r/romstage.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Luis Correia luis.f.correia@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "superio/winbond/w83977tf/early_serial.c" -#include "southbridge/amd/cs5530/enable_rom.c" -#include "cpu/x86/bist.h" - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -#include "northbridge/amd/gx1/raminit.c" - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - w83977tf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/iei/rocky-512/Kconfig b/src/mainboard/iei/rocky-512/Kconfig deleted file mode 100644 index 864da86..0000000 --- a/src/mainboard/iei/rocky-512/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if BOARD_IEI_ROCKY_512 - -# Dummy for abuild - -config MAINBOARD_PART_NUMBER - string - default "ROCKY-512" - -endif diff --git a/src/mainboard/iei/rocky-512/board_info.txt b/src/mainboard/iei/rocky-512/board_info.txt deleted file mode 100644 index 604bccf..0000000 --- a/src/mainboard/iei/rocky-512/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/en/product_IPC.asp?model=ROCKY-512 -Clone of: iei/juki-511p diff --git a/src/mainboard/televideo/Kconfig b/src/mainboard/televideo/Kconfig deleted file mode 100644 index aa2f5a1..0000000 --- a/src/mainboard/televideo/Kconfig +++ /dev/null @@ -1,35 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if VENDOR_TELEVIDEO - -choice - prompt "Mainboard model" - -config BOARD_TELEVIDEO_TC7020 - bool "TC7020" - -endchoice - -source "src/mainboard/televideo/tc7020/Kconfig" - -config MAINBOARD_VENDOR - string - default "TeleVideo" - -endif # VENDOR_TELEVIDEO diff --git a/src/mainboard/televideo/tc7020/Kconfig b/src/mainboard/televideo/tc7020/Kconfig deleted file mode 100644 index 6d77f59..0000000 --- a/src/mainboard/televideo/tc7020/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_TELEVIDEO_TC7020 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_NSC_PC97317 - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default televideo/tc7020 - -config MAINBOARD_PART_NUMBER - string - default "TC7020" - -config IRQ_SLOT_COUNT - int - default 3 - -endif # BOARD_TELEVIDEO_TC7020 diff --git a/src/mainboard/televideo/tc7020/board_info.txt b/src/mainboard/televideo/tc7020/board_info.txt deleted file mode 100644 index 93e6c5c..0000000 --- a/src/mainboard/televideo/tc7020/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: settop -Board URL: http://www.televideo.com/TeleVideo/TC7000_WinCE_Series.htm diff --git a/src/mainboard/televideo/tc7020/devicetree.cb b/src/mainboard/televideo/tc7020/devicetree.cb deleted file mode 100644 index d1fa6bd..0000000 --- a/src/mainboard/televideo/tc7020/devicetree.cb +++ /dev/null @@ -1,57 +0,0 @@ -chip northbridge/amd/gx1 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 12.0 on # ISA bridge - chip superio/nsc/pc97317 # Super I/O - device pnp 2e.0 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.1 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.2 on # RTC, Advanced power control (APC) - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 2e.3 off # Floppy (N/A on this board) - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.4 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.5 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0xe0 - end - device pnp 2e.8 on # Power management - io 0x60 = 0xe8 - end - end - end - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA (onboard) - device pci 13.0 on end # USB - device pci 14.0 on end # MiniPCI slot - device pci 15.0 on end # Ethernet (onboard) - register "ide0_enable" = "1" - register "ide1_enable" = "0" # Not available/needed on this board - end - end - chip cpu/amd/geode_gx1 # CPU - end -end diff --git a/src/mainboard/televideo/tc7020/irq_tables.c b/src/mainboard/televideo/tc7020/irq_tables.c deleted file mode 100644 index 5eef0c0..0000000 --- a/src/mainboard/televideo/tc7020/irq_tables.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com - * Copyright (C) 2007 Kenji Noguchi tokyo246@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <device/pci.h> - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 10 -#define PIRQC 9 -#define PIRQD 12 - -/* Link */ -#define LINK_PIRQA 1 -#define LINK_PIRQB 2 -#define LINK_PIRQC 3 -#define LINK_PIRQD 4 -#define LINK_NONE 0 - -/* Map */ -#define IRQ_BITMAP_LINKA (1 << PIRQA) -#define IRQ_BITMAP_LINKB (1 << PIRQB) -#define IRQ_BITMAP_LINKC (1 << PIRQC) -#define IRQ_BITMAP_LINKD (1 << PIRQD) -#define IRQ_BITMAP_NOLINK 0x0 - -#define EXCLUSIVE_PCI_IRQS (IRQ_BITMAP_LINKA | IRQ_BITMAP_LINKB | IRQ_BITMAP_LINKC | IRQ_BITMAP_LINKD) - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be a total of CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - EXCLUSIVE_PCI_IRQS, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x1, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x60, /* u8 checksum. This has to be set to some - value that would give 0 after the sum of all - bytes for this structure (including checksum) */ - - .slots = { - [0] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x13<<3)|0x0, /* 0x13 is USB OHCI */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - - [1] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x15<<3)|0x0, /* 0x15 is NSC Network device */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - - [2] = { - .slot = 0x1, /* This is a Mini PCI slot */ - .bus = 0x00, - .devfn = (0x14<<3)|0x0, - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQC, - .bitmap = IRQ_BITMAP_LINKC - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - /* NEEDSWORK: not confirmed. No device to test which uses both INTA and INTB */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - }, - [2] = { /* No INTC# for Mini PCI */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* No INTD# for Mini PCI */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - } -}; - -/** - * Copy the IRQ routing table to memory. - * - * @param addr Destination address (between 0xF0000...0x100000). - * @return The end address of the pirq routing table in memory. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/televideo/tc7020/romstage.c b/src/mainboard/televideo/tc7020/romstage.c deleted file mode 100644 index 15362e3..0000000 --- a/src/mainboard/televideo/tc7020/romstage.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Juergen Beisert juergen@kreuzholzen.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "northbridge/amd/gx1/raminit.c" -#include "superio/nsc/pc97317/early_serial.c" -#include "cpu/x86/bist.h" -#include "southbridge/amd/cs5530/enable_rom.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC97317_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - pc97317_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/northbridge/amd/Kconfig b/src/northbridge/amd/Kconfig index 33e19c2..a608da5 100644 --- a/src/northbridge/amd/Kconfig +++ b/src/northbridge/amd/Kconfig @@ -1,5 +1,4 @@ source src/northbridge/amd/amdk8/Kconfig -source src/northbridge/amd/gx1/Kconfig source src/northbridge/amd/gx2/Kconfig source src/northbridge/amd/amdfam10/Kconfig source src/northbridge/amd/lx/Kconfig diff --git a/src/northbridge/amd/Makefile.inc b/src/northbridge/amd/Makefile.inc index 7e85d08..870eea8 100644 --- a/src/northbridge/amd/Makefile.inc +++ b/src/northbridge/amd/Makefile.inc @@ -1,6 +1,5 @@ subdirs-$(CONFIG_NORTHBRIDGE_AMD_AMDFAM10) += amdfam10 subdirs-$(CONFIG_NORTHBRIDGE_AMD_AMDK8) += amdk8 -subdirs-$(CONFIG_NORTHBRIDGE_AMD_GX1) += gx1 subdirs-$(CONFIG_NORTHBRIDGE_AMD_GX2) += gx2 subdirs-$(CONFIG_NORTHBRIDGE_AMD_LX) += lx subdirs-$(CONFIG_NORTHBRIDGE_AMD_AGESA) += agesa diff --git a/src/northbridge/amd/gx1/Kconfig b/src/northbridge/amd/gx1/Kconfig deleted file mode 100644 index 4d57613..0000000 --- a/src/northbridge/amd/gx1/Kconfig +++ /dev/null @@ -1,22 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -config NORTHBRIDGE_AMD_GX1 - bool - diff --git a/src/northbridge/amd/gx1/Makefile.inc b/src/northbridge/amd/gx1/Makefile.inc deleted file mode 100644 index a67331f..0000000 --- a/src/northbridge/amd/gx1/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-y += northbridge.c diff --git a/src/northbridge/amd/gx1/northbridge.c b/src/northbridge/amd/gx1/northbridge.c deleted file mode 100644 index c8f7f94..0000000 --- a/src/northbridge/amd/gx1/northbridge.c +++ /dev/null @@ -1,166 +0,0 @@ -#include <console/console.h> -#include <arch/io.h> -#include <stdint.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <stdlib.h> -#include <string.h> -#include <cpu/amd/gx1def.h> -#include <cpu/x86/cache.h> -#include <cpu/cpu.h> - -#define NORTHBRIDGE_FILE "northbridge.c" -/* -*/ - -static void optimize_xbus(device_t dev) -{ - /* Optimise X-Bus performance */ - pci_write_config8(dev, 0x40, 0x1e); - pci_write_config8(dev, 0x41, 0x52); - pci_write_config8(dev, 0x43, 0xc1); - pci_write_config8(dev, 0x44, 0x00); -} - -/** - * Enables memory from 0xC0000 up to 0xFFFFF. - * So this region is read/write and cache able - * - * FIXME: What about PCI master access into - * this region? - **/ - -static void enable_shadow(device_t dev) -{ - write32(GX_BASE+BC_XMAP_2, 0x77777777); - write32(GX_BASE+BC_XMAP_3, 0x77777777); -} - -static void northbridge_init(device_t dev) -{ - printk(BIOS_DEBUG, "northbridge: %s()\n", __func__); - - optimize_xbus(dev); - enable_shadow(dev); - printk(BIOS_SPEW, "Calling enable_cache()\n"); - enable_cache(); -} - - -static struct device_operations northbridge_operations = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = northbridge_init, - .enable = 0, - .ops_pci = 0, -}; - -static const struct pci_driver northbridge_driver __pci_driver = { - .ops = &northbridge_operations, - .vendor = PCI_VENDOR_ID_CYRIX, - .device = PCI_DEVICE_ID_CYRIX_PCI_MASTER, -}; - -#include <cbmem.h> - -static void pci_domain_set_resources(device_t dev) -{ - device_t mc_dev; - uint32_t pci_tolm; - - pci_tolm = find_pci_tolm(dev->link_list); - mc_dev = dev->link_list->children; - if (mc_dev) { - unsigned int tomk, tolmk; - unsigned int ramreg = 0; - int i, idx; - unsigned int *bcdramtop = (unsigned int *)(GX_BASE + BC_DRAM_TOP); - unsigned int *mcgbaseadd = (unsigned int *)(GX_BASE + MC_GBASE_ADD); - - for(i=0; i<0x20; i+= 0x10) { - unsigned int *mcreg = (unsigned int *)(GX_BASE + MC_BANK_CFG); - unsigned int mem_config = *mcreg; - - if (((mem_config & (DIMM_PG_SZ << i)) >> (4 + i)) == 7) - continue; - ramreg += 1 << (((mem_config & (DIMM_SZ << i)) >> (i + 8)) + 2); - } - - tomk = ramreg << 10; - - /* Sort out the framebuffer size */ - tomk -= CONFIG_VIDEO_MB * 1024; - *bcdramtop = ((tomk << 10) - 1); - *mcgbaseadd = (tomk >> 9); - - printk(BIOS_DEBUG, "BC_DRAM_TOP = 0x%08x\n", *bcdramtop); - printk(BIOS_DEBUG, "MC_GBASE_ADD = 0x%08x\n", *mcgbaseadd); - - printk(BIOS_DEBUG, "I would set ram size to %d Mbytes\n", (tomk >> 10)); - - /* Compute the top of Low memory */ - tolmk = pci_tolm >> 10; - if (tolmk >= tomk) { - /* The PCI hole does does not overlap the memory. - */ - tolmk = tomk; - } - - set_top_of_ram(tolmk * 1024); - - /* Report the memory regions */ - idx = 10; - ram_resource(dev, idx++, 0, tolmk); - } - assign_resources(dev->link_list); -} - -static struct device_operations pci_domain_ops = { - .read_resources = pci_domain_read_resources, - .set_resources = pci_domain_set_resources, - .enable_resources = NULL, - .init = NULL, - .scan_bus = pci_domain_scan_bus, - .ops_pci_bus = pci_bus_default_ops, -}; - -static void cpu_bus_init(device_t dev) -{ - printk(BIOS_SPEW, "%s:%s()\n", NORTHBRIDGE_FILE, __func__); - initialize_cpus(dev->link_list); -} - -static void cpu_bus_noop(device_t dev) -{ -} - -static struct device_operations cpu_bus_ops = { - .read_resources = cpu_bus_noop, - .set_resources = cpu_bus_noop, - .enable_resources = cpu_bus_noop, - .init = cpu_bus_init, - .scan_bus = 0, -}; - -static void enable_dev(struct device *dev) -{ - printk(BIOS_SPEW, "%s:%s()\n", NORTHBRIDGE_FILE, __func__); - /* Set the operations if it is a special bus type */ - if (dev->path.type == DEVICE_PATH_DOMAIN) { - printk(BIOS_SPEW, "DEVICE_PATH_DOMAIN\n"); - dev->ops = &pci_domain_ops; - } - else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { - printk(BIOS_SPEW, "DEVICE_PATH_CPU_CLUSTER\n"); - dev->ops = &cpu_bus_ops; - } else { - printk(BIOS_SPEW, "device path type %d\n",dev->path.type); - } -} - -struct chip_operations northbridge_amd_gx1_ops = { - CHIP_NAME("AMD GX1 Northbridge") - .enable_dev = enable_dev, -}; diff --git a/src/northbridge/amd/gx1/raminit.c b/src/northbridge/amd/gx1/raminit.c deleted file mode 100644 index aa07f49..0000000 --- a/src/northbridge/amd/gx1/raminit.c +++ /dev/null @@ -1,354 +0,0 @@ -#include <cpu/amd/gx1def.h> - -/* -This software and ancillary information (herein called SOFTWARE ) -called LinuxBIOS is made available under the terms described -here. The SOFTWARE has been approved for release with associated -LA-CC Number 00-34 . Unless otherwise indicated, this SOFTWARE has -been authored by an employee or employees of the University of -California, operator of the Los Alamos National Laboratory under -Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The -U.S. Government has rights to use, reproduce, and distribute this -SOFTWARE. The public may copy, distribute, prepare derivative works -and publicly display this SOFTWARE without charge, provided that this -Notice and any statement of authorship are reproduced on all copies. -Neither the Government nor the University makes any warranty, express -or implied, or assumes any liability or responsibility for the use of -this SOFTWARE. If SOFTWARE is modified to produce derivative works, -such modified SOFTWARE should be clearly marked, so as not to confuse -it with the version available from LANL. - */ -/* Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL - * rminnich@lanl.gov - */ - -/* SDRAM initialization for GX1 - translated from Christer Weinigel's - assembler version into C. - - Hamish Guthrie 10/4/2005 hamish@prodigi.ch -*/ - -#define NUM_REFRESH 8 -#define TEST_DATA1 0x05A5A5A5A -#define TEST_DATA2 0x0DEADBEEF - -void setGX1Mem(unsigned int addr, unsigned int data) -{ - write32(addr, data); -} - -unsigned int getGX1Mem(unsigned int addr) -{ - return (unsigned int)read32(addr); -} - -void do_refresh(void) -{ -unsigned int tval, i; - - post_code(0x71); - tval = getGX1Mem(GX_BASE + MC_MEM_CNTRL1); - tval |= RFSHTST; - for(i=0; i>NUM_REFRESH; i++) - setGX1Mem(GX_BASE + MC_MEM_CNTRL1, tval); - post_code(0x72); -} - - -void enable_dimm(void) -{ -unsigned int tval, i; - - post_code(0x73); - - /* start SDCLCK's */ - tval = getGX1Mem(GX_BASE + MC_MEM_CNTRL1); - tval &= ~SDCLKSTRT; - setGX1Mem(GX_BASE + MC_MEM_CNTRL1, tval); - tval |= SDCLKSTRT; - setGX1Mem(GX_BASE + MC_MEM_CNTRL1, tval); - - /* Unmask SDCLK's */ - tval = getGX1Mem(GX_BASE + MC_MEM_CNTRL2); - tval &= ~(SDCLK_MASK | SDCLKOUT_MASK); - setGX1Mem(GX_BASE + MC_MEM_CNTRL2, tval); - tval = getGX1Mem(GX_BASE + MC_MEM_CNTRL2); - - /* Wait for clocks to unmask */ - for(i=0; i<5000; i++) - outb(0, 0xed); - - /* Refresh memory */ - tval = getGX1Mem(GX_BASE + MC_MEM_CNTRL1); - tval |= RFSHTST; - for(i=0; i<NUM_REFRESH; i++) - setGX1Mem(GX_BASE + MC_MEM_CNTRL1, tval); - tval &= ~RFSHTST; - - /* Start the SDCLK's */ - tval &= ~PROGRAM_SDRAM; - setGX1Mem(GX_BASE + MC_MEM_CNTRL1, tval); - tval |= PROGRAM_SDRAM | 0x00002000; /* Set refresh timing */ - setGX1Mem(GX_BASE + MC_MEM_CNTRL1, tval); - tval &= ~PROGRAM_SDRAM; - setGX1Mem(GX_BASE + MC_MEM_CNTRL1, tval); - - /* Refresh memory again */ - tval = getGX1Mem(GX_BASE + MC_MEM_CNTRL1); - tval |= RFSHTST; - for(i=0; i>NUM_REFRESH; i++) - setGX1Mem(GX_BASE + MC_MEM_CNTRL1, tval); - - for(i=0; i<2000; i++) - outb(0, 0xed); - post_code(0x74); -} - -static unsigned int size_dimm(int dimm_shift) -{ -int bank_cfg = 0x700; /* MC_BANK_CFG for 512M */ -unsigned int offset = 0x10000000; /* Offset 256M */ -int failed_flag = 1; - - do { - setGX1Mem(0, TEST_DATA1); - setGX1Mem(offset, TEST_DATA2); - setGX1Mem(0x100, 0); /* Clear the bus */ - if (getGX1Mem(0) != TEST_DATA1) { - setGX1Mem(GX_BASE + MC_BANK_CFG, - getGX1Mem(GX_BASE + MC_BANK_CFG) & ~(DIMM_SZ << dimm_shift)); - bank_cfg -= 0x100; - setGX1Mem(GX_BASE + MC_BANK_CFG, - getGX1Mem(GX_BASE + MC_BANK_CFG) | (bank_cfg << dimm_shift)); - do_refresh(); - offset >>= 1; - } else { - failed_flag = 0; - break; - } - } while (bank_cfg >= 0); - - if (failed_flag) - return (0x0070 << dimm_shift); - else - return(getGX1Mem(GX_BASE + MC_BANK_CFG) & (DIMM_SZ << dimm_shift)); - -} - -static unsigned int module_banks(int dimm_shift) -{ -int page_size = 0x800; /* Smallest page = 1K * 2 banks */ -int comp_banks; - -#if 0 - print_debug("MC_BANK_CFG = "); - print_debug_hex32(getGX1Mem(GX_BASE + MC_BANK_CFG)); - print_debug("\n"); -#endif - - /* retrieve the page size from the MC register */ - page_size <<= (((getGX1Mem(GX_BASE + MC_BANK_CFG) & (DIMM_PG_SZ << dimm_shift)) >> dimm_shift) >> 4); - -#if 0 - print_debug(" page_size = "); - print_debug_hex32(page_size); - print_debug("\n"); -#endif - - comp_banks = (((getGX1Mem(GX_BASE + MC_BANK_CFG) & (DIMM_COMP_BNK << dimm_shift)) >> dimm_shift) >> 12); - page_size <<= comp_banks; - - setGX1Mem(0, TEST_DATA1); - setGX1Mem(page_size, TEST_DATA2); - setGX1Mem(0x100, 0); /* Clear the bus */ - if (getGX1Mem(page_size) != TEST_DATA2) { - setGX1Mem(GX_BASE + MC_BANK_CFG, - getGX1Mem(GX_BASE + MC_BANK_CFG) & ~(DIMM_MOD_BNK << dimm_shift)); - do_refresh(); - } -#if 0 - print_debug("MC_BANK_CFG = "); - print_debug_hex32(getGX1Mem(GX_BASE + MC_BANK_CFG)); - print_debug("\n"); -#endif - return(getGX1Mem(GX_BASE + MC_BANK_CFG) & (DIMM_MOD_BNK << dimm_shift)); -} - -static unsigned int component_banks(int dimm_shift) -{ -int page_size = 0x800; /* Smallest page = 1K * 2 banks */ - -#if 0 - print_debug("MC_BANK_CFG = "); - print_debug_hex32(getGX1Mem(GX_BASE + MC_BANK_CFG)); - print_debug("\n"); -#endif - - page_size = page_size << (((getGX1Mem(GX_BASE + MC_BANK_CFG) & (DIMM_PG_SZ << dimm_shift)) >> dimm_shift) >> 4); - -#if 0 - print_debug(" page_size = "); - print_debug_hex32(page_size); - print_debug("\n"); -#endif - - setGX1Mem(0, TEST_DATA1); - setGX1Mem(page_size, TEST_DATA2); - setGX1Mem(0x100, 0); /* Clear the bus */ - if (getGX1Mem(0) != TEST_DATA1) { - setGX1Mem(GX_BASE + MC_BANK_CFG, - getGX1Mem(GX_BASE + MC_BANK_CFG) & ~(DIMM_COMP_BNK << dimm_shift)); - do_refresh(); - } -#if 0 - print_debug("MC_BANK_CFG = "); - print_debug_hex32(getGX1Mem(GX_BASE + MC_BANK_CFG)); - print_debug("\n"); -#endif - return(getGX1Mem(GX_BASE + MC_BANK_CFG) & (DIMM_COMP_BNK << dimm_shift)); -} - -static unsigned int page_size(int dimm_shift) -{ -unsigned int page_test_offset = 0x2000; -unsigned int temp; -int page_size_config = 0x40; -unsigned int probe_config; - - do { - setGX1Mem(0, TEST_DATA1); - setGX1Mem(page_test_offset, TEST_DATA2); - setGX1Mem(0x100, 0); - temp = getGX1Mem(0); - setGX1Mem(0, 0); - if(temp == TEST_DATA1) { -#if 0 - print_debug(" Page size Config = "); - print_debug_hex32(page_size_config << dimm_shift); - print_debug("\n"); -#endif - return(page_size_config << dimm_shift); - } - - temp = ~(DIMM_PG_SZ << dimm_shift); - - probe_config = getGX1Mem(GX_BASE + MC_BANK_CFG); - probe_config &= temp; - - page_size_config -= 0x10; - page_size_config <<= dimm_shift; - - probe_config |= page_size_config; - - page_size_config >>= dimm_shift; - - page_test_offset >>= 1; - - setGX1Mem(GX_BASE + MC_BANK_CFG, probe_config); - do_refresh(); - } while (page_size_config >= 0); - - return 0x70; -} - -static int dimm_detect(int dimm_shift) -{ -unsigned int test; - - print_debug("Probing for DIMM"); - print_debug_char((dimm_shift >> 4) + 0x30); - print_debug("\n"); - - setGX1Mem(0, TEST_DATA1); - setGX1Mem(0x100, 0); - test = getGX1Mem(0); - setGX1Mem(0, 0); - - if (test != TEST_DATA1) - return 0; - - print_debug(" Found DIMM"); - print_debug_char((dimm_shift >> 4) + 0x30); - print_debug("\n"); - - return 1; -} - -static int size_memory(int dimm_shift, unsigned int mem_config) -{ - - if (!dimm_detect(dimm_shift)) - return (mem_config); - - mem_config &= (~(DIMM_PG_SZ << dimm_shift)); - mem_config |= (page_size(dimm_shift)); - - print_debug(" Page Size: "); - print_debug_hex32(0x400 << ((mem_config & (DIMM_PG_SZ << dimm_shift)) >> (dimm_shift + 4))); - print_debug("\n"); - - /* Now do component banks detection */ - - mem_config &= (~(DIMM_COMP_BNK << dimm_shift)); - mem_config |= (component_banks(dimm_shift)); - - print_debug(" Component Banks: "); - print_debug_char((((mem_config & (DIMM_COMP_BNK << dimm_shift)) >> (dimm_shift + 12)) ? 4 : 2) + 0x30); - print_debug("\n"); - - /* Now do module banks */ - - mem_config &= (~(DIMM_MOD_BNK << dimm_shift)); - mem_config |= (module_banks(dimm_shift)); - - print_debug(" Module Banks: "); - print_debug_char((((mem_config & (DIMM_MOD_BNK << dimm_shift)) >> (dimm_shift + 14)) ? 2 : 1) + 0x30); - print_debug("\n"); - - mem_config &= (~(DIMM_SZ << dimm_shift)); - mem_config |= (size_dimm(dimm_shift)); - - print_debug(" DIMM size: "); - print_debug_hex32(1 << - ((mem_config & (DIMM_SZ << dimm_shift)) >> (dimm_shift + 8)) + 22); - print_debug("\n"); - - return (mem_config); -} - -static void sdram_init(void) -{ -unsigned int mem_config = 0x00700070; - - print_debug("Setting up default parameters for memory\n"); - post_code(0x70); - - setGX1Mem(GX_BASE + MC_MEM_CNTRL2, 0x000007d8); /* Disable all CLKS, Shift = 3 */ - setGX1Mem(GX_BASE + MC_MEM_CNTRL1, 0x92140000); /* MD_DS=2, MA_DS=2, CNTL_DS=2 SDCLKRATE=4 */ - setGX1Mem(GX_BASE + MC_BANK_CFG, 0x00700070); /* No DIMMS installed */ - setGX1Mem(GX_BASE + MC_SYNC_TIM1, 0x3a733225); /* LTMODE=3, RC=10, RAS=7, RP=3, RCD=3, RRD=2, DPL=2 */ - setGX1Mem(GX_BASE + MC_BANK_CFG, 0x57405740); /* Largest DIMM size - 0x4000 -- 2 module banks - 0x1000 -- 4 component banks - 0x0700 -- DIMM size 512MB - 0x0040 -- Page Size 16kB */ - - enable_dimm(); - - print_debug("Sizing memory\n"); - - setGX1Mem(GX_BASE + MC_BANK_CFG, 0x00705740); - do_refresh(); - mem_config = size_memory(0, mem_config); - setGX1Mem(GX_BASE + MC_BANK_CFG, 0x57400070); - do_refresh(); - mem_config = size_memory(16, mem_config); - - print_debug("MC_BANK_CFG = "); - print_debug_hex32(mem_config); - print_debug("\n"); - - setGX1Mem(GX_BASE + MC_BANK_CFG, mem_config); - enable_dimm(); - post_code(0x7e); -} diff --git a/src/northbridge/amd/gx1/raminit.h b/src/northbridge/amd/gx1/raminit.h deleted file mode 100644 index 6e40683..0000000 --- a/src/northbridge/amd/gx1/raminit.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef RAMINIT_H -#define RAMINIT_H - -#define DIMM_SOCKETS 4 -struct mem_controller { - device_t d0; - uint16_t channel0[DIMM_SOCKETS]; -}; - - -#endif /* RAMINIT_H */ diff --git a/src/southbridge/amd/Kconfig b/src/southbridge/amd/Kconfig index 867afca..14f84d4 100644 --- a/src/southbridge/amd/Kconfig +++ b/src/southbridge/amd/Kconfig @@ -4,7 +4,6 @@ source src/southbridge/amd/cs5536/Kconfig #source src/southbridge/amd/amd8131-disable/Kconfig source src/southbridge/amd/amd8132/Kconfig source src/southbridge/amd/amd8151/Kconfig -source src/southbridge/amd/cs5530/Kconfig source src/southbridge/amd/cs5535/Kconfig source src/southbridge/amd/rs690/Kconfig source src/southbridge/amd/sb600/Kconfig diff --git a/src/southbridge/amd/Makefile.inc b/src/southbridge/amd/Makefile.inc index 0e3f785..9e10f5d 100644 --- a/src/southbridge/amd/Makefile.inc +++ b/src/southbridge/amd/Makefile.inc @@ -8,7 +8,6 @@ subdirs-$(CONFIG_SOUTHBRIDGE_AMD_RS780) += rs780 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_SB700) += sb700 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_SB800) += sb800 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_SR5650) += sr5650 -subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CS5530) += cs5530 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CS5535) += cs5535 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CS5536) += cs5536 subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_SB700) += cimx diff --git a/src/southbridge/amd/cs5530/Kconfig b/src/southbridge/amd/cs5530/Kconfig deleted file mode 100644 index 3e04276..0000000 --- a/src/southbridge/amd/cs5530/Kconfig +++ /dev/null @@ -1,74 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -config SOUTHBRIDGE_AMD_CS5530 - bool - -menu "AMD Geode GX1 video support" - depends on SOUTHBRIDGE_AMD_CS5530 - -config GX1_VIDEO - bool "AMD Geode GX1 video mode support" - default y - depends on SOUTHBRIDGE_AMD_CS5530 - -choice - prompt "AMD Geode GX1 video mode" - default GX1_VIDEOMODE_0 - depends on GX1_VIDEO - -config GX1_VIDEOMODE_0 - bool "640x480" -config GX1_VIDEOMODE_1 - bool "800x600" -config GX1_VIDEOMODE_2 - bool "1024x768" -config GX1_VIDEOMODE_3 - bool "1280x960" -config GX1_VIDEOMODE_4 - bool "1280x1024" - -endchoice - -config GX1_VIDEOMODE - int - default 0 if GX1_VIDEOMODE_0 - default 1 if GX1_VIDEOMODE_1 - default 2 if GX1_VIDEOMODE_2 - default 3 if GX1_VIDEOMODE_3 - default 4 if GX1_VIDEOMODE_4 - depends on GX1_VIDEO - -# TODO: Check how much RAM each of the modes actually needs. -config VIDEO_MB - int - default 2 if GX1_VIDEOMODE_0 - default 2 if GX1_VIDEOMODE_1 - default 2 if GX1_VIDEOMODE_2 - default 2 if GX1_VIDEOMODE_3 - default 2 if GX1_VIDEOMODE_4 - depends on GX1_VIDEO - -config SPLASH_GRAPHIC - bool "Enable splash screen on AMD Geode GX1 boards" - default y - depends on GX1_VIDEO - -endmenu - diff --git a/src/southbridge/amd/cs5530/Makefile.inc b/src/southbridge/amd/cs5530/Makefile.inc deleted file mode 100644 index 74d6057..0000000 --- a/src/southbridge/amd/cs5530/Makefile.inc +++ /dev/null @@ -1,25 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-y += cs5530.c -ramstage-y += isa.c -ramstage-y += ide.c -ramstage-y += vga.c -ramstage-y += pirq.c diff --git a/src/southbridge/amd/cs5530/bitmap.c b/src/southbridge/amd/cs5530/bitmap.c deleted file mode 100644 index 0e5e02c..0000000 --- a/src/southbridge/amd/cs5530/bitmap.c +++ /dev/null @@ -1,304 +0,0 @@ -/* do not edit -This is an image of size 51 x 60 with 234 colours */ -static const int width=51; -static const int height=60; -static const int colours=234; -static const unsigned long colour_map[234] = { -0x00000000, /* 0 */ -0x00000001, /* 1 */ -0x00000020, /* 2 */ -0x00000021, /* 3 */ -0x00000040, /* 4 */ -0x00000800, /* 5 */ -0x00000821, /* 6 */ -0x00000840, /* 7 */ -0x00000841, /* 8 */ -0x00000861, /* 9 */ -0x00001040, /* 10 */ -0x00001081, /* 11 */ -0x00001082, /* 12 */ -0x00001083, /* 13 */ -0x000010A2, /* 14 */ -0x00001881, /* 15 */ -0x000018C3, /* 16 */ -0x000018E3, /* 17 */ -0x000020A0, /* 18 */ -0x000020E4, /* 19 */ -0x00002103, /* 20 */ -0x00002104, /* 21 */ -0x00002124, /* 22 */ -0x00002921, /* 23 */ -0x00002945, /* 24 */ -0x00002946, /* 25 */ -0x00002965, /* 26 */ -0x00002966, /* 27 */ -0x00003186, /* 28 */ -0x000031A6, /* 29 */ -0x00003942, /* 30 */ -0x00003982, /* 31 */ -0x000039A7, /* 32 */ -0x000039C7, /* 33 */ -0x000039E7, /* 34 */ -0x000039E8, /* 35 */ -0x000041A2, /* 36 */ -0x000041C2, /* 37 */ -0x000041E7, /* 38 */ -0x00004207, /* 39 */ -0x00004208, /* 40 */ -0x00004228, /* 41 */ -0x00004229, /* 42 */ -0x000049E3, /* 43 */ -0x000049E5, /* 44 */ -0x00004A46, /* 45 */ -0x00004A47, /* 46 */ -0x00004A48, /* 47 */ -0x00004A49, /* 48 */ -0x00004A69, /* 49 */ -0x00004A8A, /* 50 */ -0x00005228, /* 51 */ -0x00005247, /* 52 */ -0x00005287, /* 53 */ -0x0000528A, /* 54 */ -0x000052AA, /* 55 */ -0x00005A21, /* 56 */ -0x00005A43, /* 57 */ -0x00005A63, /* 58 */ -0x00005AA9, /* 59 */ -0x00005AAA, /* 60 */ -0x00005ACA, /* 61 */ -0x00005ACB, /* 62 */ -0x00005AEB, /* 63 */ -0x00006222, /* 64 */ -0x00006261, /* 65 */ -0x000062A8, /* 66 */ -0x000062C7, /* 67 */ -0x000062E8, /* 68 */ -0x000062EB, /* 69 */ -0x000062EC, /* 70 */ -0x0000630B, /* 71 */ -0x0000630C, /* 72 */ -0x0000632C, /* 73 */ -0x00006A41, /* 74 */ -0x00006B05, /* 75 */ -0x00006B28, /* 76 */ -0x00006B29, /* 77 */ -0x00006B2D, /* 78 */ -0x00006B4D, /* 79 */ -0x00006B6D, /* 80 */ -0x00006B6E, /* 81 */ -0x00006B8D, /* 82 */ -0x000072A2, /* 83 */ -0x000072E2, /* 84 */ -0x000072E5, /* 85 */ -0x00007306, /* 86 */ -0x00007329, /* 87 */ -0x0000738E, /* 88 */ -0x000073AE, /* 89 */ -0x000073AF, /* 90 */ -0x000073CF, /* 91 */ -0x00007B28, /* 92 */ -0x00007B44, /* 93 */ -0x00007B48, /* 94 */ -0x00007B67, /* 95 */ -0x00007B69, /* 96 */ -0x00007BCE, /* 97 */ -0x00007BCF, /* 98 */ -0x00007BEF, /* 99 */ -0x00008323, /* 100 */ -0x00008345, /* 101 */ -0x000083AA, /* 102 */ -0x00008410, /* 103 */ -0x00008430, /* 104 */ -0x00008B02, /* 105 */ -0x00008B63, /* 106 */ -0x00008B83, /* 107 */ -0x00008B84, /* 108 */ -0x00008BA6, /* 109 */ -0x00008BC7, /* 110 */ -0x00008BEA, /* 111 */ -0x00008BEE, /* 112 */ -0x00008C51, /* 113 */ -0x00008C71, /* 114 */ -0x00009362, /* 115 */ -0x00009363, /* 116 */ -0x00009383, /* 117 */ -0x000093C5, /* 118 */ -0x000093C7, /* 119 */ -0x00009405, /* 120 */ -0x00009492, /* 121 */ -0x00009493, /* 122 */ -0x000094B2, /* 123 */ -0x00009B82, /* 124 */ -0x00009BC3, /* 125 */ -0x00009C2D, /* 126 */ -0x00009CB3, /* 127 */ -0x00009CD3, /* 128 */ -0x00009CF3, /* 129 */ -0x00009CF4, /* 130 */ -0x00009D14, /* 131 */ -0x0000A401, /* 132 */ -0x0000A403, /* 133 */ -0x0000A423, /* 134 */ -0x0000A44C, /* 135 */ -0x0000A489, /* 136 */ -0x0000A4F1, /* 137 */ -0x0000A514, /* 138 */ -0x0000A533, /* 139 */ -0x0000A534, /* 140 */ -0x0000ABE1, /* 141 */ -0x0000AC22, /* 142 */ -0x0000AC24, /* 143 */ -0x0000AC42, /* 144 */ -0x0000AC44, /* 145 */ -0x0000AC48, /* 146 */ -0x0000AC69, /* 147 */ -0x0000AC8A, /* 148 */ -0x0000ACEE, /* 149 */ -0x0000AD0A, /* 150 */ -0x0000AD2E, /* 151 */ -0x0000AD55, /* 152 */ -0x0000AD75, /* 153 */ -0x0000AD76, /* 154 */ -0x0000B423, /* 155 */ -0x0000B441, /* 156 */ -0x0000B444, /* 157 */ -0x0000B464, /* 158 */ -0x0000B484, /* 159 */ -0x0000B4A3, /* 160 */ -0x0000B4C4, /* 161 */ -0x0000B533, /* 162 */ -0x0000B596, /* 163 */ -0x0000B5B6, /* 164 */ -0x0000BC65, /* 165 */ -0x0000BC83, /* 166 */ -0x0000BC84, /* 167 */ -0x0000BCC9, /* 168 */ -0x0000BD03, /* 169 */ -0x0000BD2A, /* 170 */ -0x0000BD54, /* 171 */ -0x0000BD97, /* 172 */ -0x0000BDB5, /* 173 */ -0x0000BDD7, /* 174 */ -0x0000BDD8, /* 175 */ -0x0000BDF7, /* 176 */ -0x0000BE19, /* 177 */ -0x0000C4A2, /* 178 */ -0x0000C4C2, /* 179 */ -0x0000C4C3, /* 180 */ -0x0000C5CE, /* 181 */ -0x0000C5F9, /* 182 */ -0x0000C618, /* 183 */ -0x0000C61A, /* 184 */ -0x0000C638, /* 185 */ -0x0000CCE2, /* 186 */ -0x0000CD03, /* 187 */ -0x0000CD43, /* 188 */ -0x0000CD61, /* 189 */ -0x0000CD88, /* 190 */ -0x0000CE39, /* 191 */ -0x0000CE58, /* 192 */ -0x0000CE59, /* 193 */ -0x0000CE79, /* 194 */ -0x0000CE7A, /* 195 */ -0x0000CE7B, /* 196 */ -0x0000CE9A, /* 197 */ -0x0000D502, /* 198 */ -0x0000D522, /* 199 */ -0x0000D62C, /* 200 */ -0x0000D69A, /* 201 */ -0x0000D69B, /* 202 */ -0x0000D6BA, /* 203 */ -0x0000DD23, /* 204 */ -0x0000DD41, /* 205 */ -0x0000DD81, /* 206 */ -0x0000DDA1, /* 207 */ -0x0000DDA4, /* 208 */ -0x0000DE9C, /* 209 */ -0x0000DEDB, /* 210 */ -0x0000DEFB, /* 211 */ -0x0000DEFD, /* 212 */ -0x0000E5A2, /* 213 */ -0x0000E71C, /* 214 */ -0x0000E73C, /* 215 */ -0x0000EDC1, /* 216 */ -0x0000EF3E, /* 217 */ -0x0000EF5D, /* 218 */ -0x0000EF7D, /* 219 */ -0x0000EF7E, /* 220 */ -0x0000EF7F, /* 221 */ -0x0000F79D, /* 222 */ -0x0000F79E, /* 223 */ -0x0000F7BE, /* 224 */ -0x0000F7BF, /* 225 */ -0x0000F7DE, /* 226 */ -0x0000FFB8, /* 227 */ -0x0000FFBF, /* 228 */ -0x0000FFDD, /* 229 */ -0x0000FFDE, /* 230 */ -0x0000FFDF, /* 231 */ -0x0000FFFB, /* 232 */ -0x0000FFFF, /* 233 */ -}; - -static const unsigned char bitmap[3060] = { -0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE7,0xA4,0xD3,0xE9,0xDF,0xDF,0x8C,0xE7,0xE0,0xDF,0xB0,0xDB,0xE7,0xE0,0xE0,0xC2,0xE7,0xE7,0xE0,0xD3,0xE9,0xE9,0xE0,0xDF,0xDF,0xE7,0xE7,0xD6,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9, -0xE9,0xE9,0xE9,0xE9,0xE0,0xDB,0xDA,0xDF,0xE9,0x67,0xA3,0xD7,0xDA,0xE9,0x71,0xD7,0xA3,0xE9,0xD6,0xD7,0xD2,0xD6,0xE9,0xC1,0xDF,0x68,0xE9,0xDA,0xE0,0x99,0xAE,0xE9,0xD7,0xB9,0xE9,0xA3,0xDF,0xE0,0xE7,0xE7,0xE7,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9, -0xE9,0xE9,0xE9,0xD6,0x71,0x67,0x63,0x72,0xE9,0x31,0x4F,0x58,0x99,0xD6,0x1D,0x67,0x50,0xB7,0x67,0x36,0x4F,0x99,0xD6,0x28,0x49,0x3F,0xDB,0x71,0x48,0x48,0x80,0xDB,0x37,0x48,0xE9,0x8C,0x58,0x68,0xDA,0xDB,0xDF,0xE0,0xE7,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9, -0xE9,0xE9,0xE9,0x79,0x63,0x63,0x58,0x29,0x7B,0x1A,0x28,0x30,0x30,0x63,0x0C,0x50,0x10,0x50,0x28,0x21,0x1D,0x31,0x62,0x11,0x36,0x10,0x68,0x30,0x30,0x16,0x3E,0x68,0x15,0x29,0x8C,0x3E,0x11,0x36,0x4F,0xC2,0xD7,0xDA,0xDF,0xE7,0xE7,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9, -0xE9,0xE9,0xE7,0x62,0x62,0x63,0x63,0x22,0x37,0x16,0x28,0x36,0x1C,0x28,0x0C,0x49,0x15,0x29,0x16,0x21,0x1D,0x22,0x22,0x0C,0x31,0x11,0x29,0x15,0x21,0x15,0x22,0x22,0x10,0x22,0x48,0x1D,0x08,0x3E,0x29,0x3E,0xB9,0xD2,0xD7,0xDB,0xE0,0xE7,0xE9,0xE9,0xE9,0xE9,0xE9, -0xE9,0xE9,0xDB,0x62,0x4F,0x4F,0x3F,0x30,0x21,0x15,0x28,0x31,0x22,0x1A,0x0C,0x50,0x18,0x1D,0x0E,0x29,0x1D,0x22,0x16,0x10,0x37,0x1D,0x1D,0x0C,0x28,0x1A,0x29,0x1A,0x18,0x21,0x21,0x16,0x0E,0x3E,0x29,0x30,0x48,0xB0,0xC9,0xD3,0xDB,0xE0,0xE7,0xE9,0xE9,0xE9,0xE9, -0xE9,0xE9,0xE7,0xA3,0x72,0x21,0x15,0x31,0x36,0x30,0x49,0x36,0x3F,0x29,0x30,0x4F,0x29,0x36,0x21,0x3F,0x28,0x30,0x1A,0x28,0x3E,0x22,0x18,0x16,0x3E,0x1D,0x21,0x11,0x22,0x21,0x10,0x11,0x37,0x11,0x15,0x28,0x48,0x80,0xA4,0xC1,0xD3,0xDA,0xE0,0xE7,0xE9,0xE9,0xE9, -0xE9,0xD3,0xE9,0xE9,0xE9,0xB7,0x59,0x22,0x58,0x48,0x48,0x48,0x37,0x37,0x3E,0x36,0x36,0x36,0x36,0x37,0x31,0x36,0x36,0x37,0x36,0x30,0x29,0x31,0x36,0x30,0x31,0x31,0x31,0x30,0x30,0x37,0x15,0x15,0xC1,0xE9,0xE9,0x8A,0x59,0x99,0xC1,0xD3,0xDB,0xE0,0xE9,0xE9,0xE9, -0xE9,0x68,0x50,0x1C,0x16,0x31,0x30,0x1A,0x58,0x49,0x3F,0x3E,0x3E,0x37,0x36,0x37,0x31,0x30,0x30,0x31,0x36,0x30,0x29,0x29,0x29,0x29,0x28,0x28,0x29,0x22,0x28,0x22,0x29,0x29,0x30,0x31,0x15,0x1C,0x59,0x50,0x36,0x36,0x49,0x7B,0xA3,0xC2,0xD6,0xDB,0xE7,0xE9,0xE9, -0xE9,0xA4,0x50,0x58,0x36,0x29,0x37,0x4F,0x50,0x3F,0x3E,0x31,0x31,0x31,0x36,0x36,0x36,0x31,0x30,0x30,0x29,0x30,0x30,0x29,0x28,0x22,0x28,0x28,0x22,0x28,0x22,0x21,0x22,0x22,0x22,0x36,0x28,0x29,0x1A,0x15,0x0C,0x1A,0x37,0x63,0x80,0xAE,0xC9,0xD7,0xDF,0xE7,0xE9, -0xE9,0xE7,0xC9,0x80,0x28,0x16,0x15,0x15,0x49,0x37,0x37,0x37,0x30,0x30,0x29,0x30,0x31,0x30,0x29,0x29,0x28,0x36,0x28,0x28,0x48,0x29,0x21,0x22,0x28,0x21,0x21,0x22,0x1D,0x22,0x22,0x30,0x21,0x16,0x1C,0x21,0x31,0x31,0x37,0x4F,0x68,0x8C,0xB7,0xD3,0xDB,0xE7,0xE9, -0xE9,0xC2,0xE9,0xDA,0xB0,0x4F,0x1D,0x1D,0x4F,0x37,0x31,0x36,0x36,0x30,0x30,0x30,0x31,0x29,0x30,0x28,0x36,0x81,0x50,0x15,0x0C,0x31,0x28,0x21,0x22,0x22,0x22,0x21,0x22,0x21,0x1D,0x28,0x0E,0x11,0x81,0xDF,0xE0,0x80,0x36,0x3E,0x59,0x7B,0xA4,0xC9,0xDA,0xE0,0xE9, -0xE7,0x72,0x67,0x3E,0x37,0x36,0x16,0x28,0x49,0x37,0x36,0x30,0x30,0x30,0x29,0x30,0x29,0x30,0x22,0x28,0x49,0xB7,0xB9,0x99,0x29,0x0E,0x31,0x28,0x1D,0x21,0x22,0x1D,0x1D,0x22,0x21,0x28,0x11,0x22,0x8C,0x98,0x8A,0x4F,0x30,0x36,0x4F,0x71,0x99,0xC2,0xD7,0xE0,0xE7, -0xDF,0x80,0x3E,0x18,0x10,0x21,0x31,0x3F,0x48,0x36,0x36,0x30,0x30,0x29,0x30,0x30,0x30,0x29,0x28,0x28,0x50,0xA4,0x8C,0x98,0xA4,0x3E,0x10,0x31,0x22,0x22,0x1D,0x1D,0x22,0x21,0x22,0x22,0x18,0x30,0x10,0x09,0x08,0x0C,0x1D,0x30,0x49,0x68,0x98,0xC1,0xD6,0xDF,0xE7, -0xE9,0xE7,0xB0,0x50,0x22,0x28,0x22,0x28,0x3E,0x36,0x31,0x30,0x30,0x30,0x29,0x29,0x29,0x28,0x29,0x28,0x4F,0x80,0x48,0x48,0x63,0x98,0x3F,0x16,0x29,0x21,0x1D,0x21,0x21,0x1D,0x21,0x22,0x1D,0x21,0x29,0x31,0x1D,0x1A,0x22,0x30,0x48,0x67,0x8C,0xB9,0xD6,0xDF,0xE7, -0xDF,0xD3,0xE9,0xD7,0x81,0x31,0x10,0x16,0x3E,0x36,0x31,0x30,0x29,0x30,0x29,0x29,0x28,0x28,0x28,0x28,0x37,0x67,0x48,0x48,0x47,0x50,0x7B,0x36,0x1A,0x30,0x1D,0x1D,0x1D,0x21,0x21,0x21,0x10,0x15,0x63,0xC1,0xC1,0x62,0x31,0x30,0x48,0x67,0x8C,0xB9,0xD6,0xDF,0xE7, -0xE0,0x8A,0xAE,0x67,0x4F,0x37,0x18,0x22,0x3F,0x36,0x30,0x30,0x29,0x22,0x29,0x29,0x22,0x28,0x28,0x21,0x29,0x61,0x47,0x47,0x48,0x48,0x4F,0x79,0x31,0x22,0x37,0x1D,0x1D,0x1D,0x1C,0x21,0x15,0x36,0xC1,0xD6,0xB7,0x59,0x28,0x30,0x48,0x63,0x8A,0xB9,0xD6,0xDF,0xE7, -0xD2,0x59,0x36,0x10,0x0C,0x1C,0x15,0x29,0x3F,0x30,0x36,0x30,0x30,0x28,0x22,0x1D,0x28,0x31,0x22,0x21,0x22,0x3E,0x48,0x48,0x48,0x48,0x48,0x50,0x68,0x30,0x30,0x28,0x1D,0x1C,0x21,0x1D,0x11,0x1C,0x0C,0x00,0x02,0x09,0x21,0x30,0x48,0x63,0x8A,0xB9,0xD6,0xDF,0xE7, -0xE9,0xDB,0x80,0x4F,0x30,0x3E,0x48,0x49,0x36,0x30,0x31,0x30,0x29,0x22,0x2E,0x2D,0x4C,0x6D,0x76,0x94,0x4D,0x31,0x4E,0x48,0x47,0x48,0x48,0x48,0x50,0x62,0x30,0x37,0x1D,0x1D,0x1D,0x1D,0x21,0x29,0x22,0x21,0x1C,0x16,0x21,0x30,0x48,0x63,0x8C,0xB9,0xD6,0xDF,0xE7, -0xE7,0xE0,0xB9,0x72,0x1D,0x16,0x10,0x16,0x36,0x29,0x29,0x30,0x29,0x44,0xB5,0xC8,0x5D,0x6E,0x9E,0x9D,0x78,0x5F,0x70,0x46,0x47,0x47,0x48,0x3F,0x3F,0x58,0x4F,0x36,0x36,0x1A,0x1A,0x1C,0x15,0x10,0x1D,0x49,0x63,0x37,0x36,0x30,0x48,0x67,0x8C,0xB9,0xD6,0xDF,0xE7, -0xDA,0xAE,0xE9,0xC2,0x8A,0x3F,0x1A,0x21,0x31,0x29,0x29,0x28,0x29,0x89,0xE5,0xE3,0xAA,0x66,0x38,0x4A,0x41,0x40,0x5C,0x45,0x3E,0x3E,0x3E,0x3E,0x3E,0x3F,0x58,0x48,0x48,0x31,0x18,0x21,0x10,0x21,0xD7,0xE9,0xE7,0x80,0x30,0x30,0x48,0x67,0x8C,0xB9,0xD6,0xDF,0xE7, -0xD2,0x62,0x62,0x29,0x28,0x28,0x11,0x22,0x36,0x28,0x28,0x28,0x29,0x7E,0xE4,0xE8,0x96,0x3A,0x86,0x8E,0x85,0x75,0x53,0x57,0x3C,0x37,0x37,0x37,0x37,0x37,0x3E,0x4F,0x49,0x4F,0x1C,0x1C,0x16,0x1D,0x31,0x31,0x22,0x1D,0x21,0x30,0x48,0x67,0x8C,0xB9,0xD6,0xDF,0xE7, -0xDA,0xB0,0x62,0x16,0x10,0x21,0x31,0x48,0x37,0x28,0x28,0x3B,0x6F,0x78,0x95,0x97,0x64,0xA1,0xCF,0xCE,0xC6,0xBB,0x90,0x65,0x3B,0x32,0x36,0x36,0x36,0x31,0x36,0x3F,0x4F,0x4F,0x37,0x1C,0x18,0x22,0x16,0x10,0x0E,0x0C,0x1D,0x30,0x48,0x63,0x8C,0xB9,0xD6,0xDF,0xE7, -0xE9,0xE0,0x98,0x37,0x1C,0x22,0x22,0x21,0x30,0x31,0x88,0xA5,0xA7,0xB2,0x9F,0x91,0x9F,0xB4,0xC7,0xD0,0x9C,0xA6,0x7C,0x73,0x60,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x3F,0x58,0x49,0x1C,0x1A,0x1D,0x1D,0x1C,0x21,0x1D,0x22,0x30,0x48,0x63,0x8A,0xB9,0xD6,0xDF,0xE7, -0xDF,0xD6,0xDA,0x8A,0x49,0x21,0x11,0x18,0x30,0x29,0x35,0x34,0x42,0x2B,0x24,0x1F,0x17,0x25,0x39,0x55,0x54,0x6B,0x69,0x7D,0x5E,0x3C,0x22,0x10,0x1C,0x28,0x28,0x29,0x30,0x3F,0x63,0x3F,0x10,0x10,0x67,0xB9,0xC9,0x72,0x48,0x36,0x3F,0x63,0x8A,0xB9,0xD6,0xDF,0xE7, -0xD6,0xA4,0xDB,0x98,0x68,0x31,0x1A,0x21,0x30,0x22,0x21,0x22,0x21,0x13,0x7F,0x4E,0x02,0x18,0x98,0xAF,0x19,0x0A,0x12,0x43,0x27,0x30,0x16,0x00,0x0E,0x1D,0x22,0x22,0x28,0x29,0x58,0x67,0x1C,0x1D,0xA3,0xD3,0xB9,0x67,0x29,0x30,0x3F,0x63,0x8A,0xB9,0xD3,0xDF,0xE7, -0xC1,0x62,0x30,0x0C,0x0E,0x1A,0x15,0x28,0x29,0x22,0x21,0x1C,0x2F,0x2F,0x51,0x9A,0x11,0x52,0x58,0x48,0x7A,0x02,0x05,0x30,0x1C,0x21,0x22,0x02,0x00,0x16,0x1D,0x21,0x21,0x22,0x36,0x72,0x48,0x18,0x02,0x00,0x02,0x08,0x1A,0x29,0x3F,0x63,0x8A,0xB7,0xD3,0xDF,0xE7, -0xE9,0xE0,0xAE,0x1D,0x1A,0x30,0x49,0x48,0x22,0x21,0x1D,0x21,0x29,0x23,0x33,0x56,0x74,0x77,0x2C,0x18,0x83,0x02,0x03,0x30,0x21,0x1A,0x22,0x09,0x00,0x0E,0x1C,0x1C,0x1D,0x1D,0x21,0x59,0x79,0x29,0x22,0x21,0x1C,0x18,0x21,0x30,0x3F,0x62,0x81,0xB7,0xD3,0xDF,0xE7, -0xE7,0xDA,0x98,0x3F,0x11,0x15,0x0E,0x16,0x29,0x21,0x1D,0x1D,0x29,0x14,0x93,0xCC,0xB3,0x84,0xA0,0xBE,0x4B,0x02,0x01,0x28,0x1D,0x1D,0x1D,0x18,0x00,0x02,0x18,0x1A,0x1C,0x1A,0x1C,0x29,0x81,0x15,0x30,0x62,0x7B,0x48,0x3E,0x36,0x3F,0x62,0x81,0xB7,0xD3,0xDB,0xE7, -0xD7,0xC2,0xE9,0xB0,0x71,0x31,0x15,0x1C,0x28,0x21,0x1D,0x1D,0x28,0x1E,0xA6,0xD8,0xBD,0xA9,0xBC,0xC7,0x6A,0x04,0x02,0x20,0x1A,0x1C,0x1C,0x18,0x00,0x00,0x11,0x18,0x18,0x18,0x18,0x1A,0x68,0x1C,0xD2,0xE9,0xE9,0x80,0x36,0x29,0x3E,0x62,0x80,0xB0,0xD2,0xDB,0xE7, -0xC1,0x79,0x72,0x3F,0x31,0x21,0x0E,0x1D,0x28,0x1C,0x1D,0x1A,0x30,0x0F,0x6C,0xCD,0xD5,0xBA,0x8D,0xA8,0x57,0x0E,0x2A,0x10,0x21,0x1C,0x48,0x02,0x00,0x00,0x0E,0x16,0x16,0x16,0x16,0x18,0x31,0x18,0x18,0x15,0x11,0x10,0x1C,0x29,0x3E,0x59,0x80,0xB0,0xD2,0xDB,0xE7, -0xDA,0xD2,0x72,0x0E,0x0C,0x1D,0x30,0x37,0x22,0x1C,0x1D,0x1C,0x30,0x06,0xA2,0x92,0x9B,0x8F,0x87,0xBF,0xB1,0x0D,0x1B,0x09,0x1A,0x37,0x1A,0x02,0x00,0x00,0x10,0x18,0x16,0x16,0x16,0x18,0x11,0x21,0x18,0x11,0x11,0x11,0x1D,0x29,0x3E,0x59,0x80,0xB0,0xD2,0xDB,0xE7, -0xE9,0xE0,0x99,0x37,0x1A,0x22,0x21,0x21,0x22,0x1D,0x1C,0x29,0x1D,0x16,0xAE,0xAC,0xAB,0xAD,0xD1,0xDD,0xD6,0x46,0x02,0x04,0x0B,0x0E,0x00,0x00,0x00,0x00,0x1D,0x1C,0x18,0x18,0x16,0x18,0x10,0x1A,0x1D,0x30,0x30,0x30,0x29,0x29,0x3E,0x59,0x80,0xB0,0xD2,0xDB,0xE7, -0xDF,0xB9,0x98,0x62,0x22,0x1A,0x0C,0x16,0x22,0x1C,0x21,0x26,0x09,0x5B,0x8B,0xC5,0xCA,0xDC,0xE2,0xC0,0x72,0x7B,0x07,0x07,0x03,0x00,0x00,0x00,0x00,0x0C,0x18,0x1D,0x1C,0x18,0x18,0x18,0x10,0x3F,0xD6,0xE9,0xD3,0x59,0x29,0x29,0x3E,0x59,0x80,0xB0,0xD2,0xDB,0xE7, -0xCB,0xB0,0xE9,0xAE,0x72,0x30,0x11,0x1D,0x22,0x22,0x11,0x09,0x21,0xCB,0xCB,0xE0,0xE7,0xE9,0xDE,0x99,0x79,0xB7,0x1C,0x03,0x01,0x00,0x00,0x00,0x02,0x1A,0x15,0x15,0x21,0x1C,0x18,0x18,0x0E,0x31,0x67,0x62,0x29,0x1A,0x28,0x29,0x3E,0x62,0x81,0xB0,0xD3,0xDB,0xE7, -0xB9,0x8A,0x4F,0x11,0x10,0x18,0x0E,0x21,0x29,0x11,0x18,0x10,0x3F,0xCB,0xD2,0xD7,0xDC,0xE9,0xE6,0xC9,0xB6,0xB8,0x5A,0x01,0x00,0x00,0x00,0x00,0x08,0x29,0x29,0x16,0x15,0x1A,0x1A,0x15,0x02,0x0E,0x08,0x00,0x08,0x09,0x1D,0x29,0x3E,0x62,0x81,0xB7,0xD3,0xDB,0xE7, -0xE9,0xE0,0x98,0x15,0x11,0x1D,0x3E,0x37,0x02,0x0E,0x1C,0x02,0x8A,0xA3,0x71,0xB7,0xE1,0xE9,0xE6,0xDC,0xD9,0xD4,0xC4,0x28,0x02,0x00,0x00,0x09,0x02,0x00,0x00,0x02,0x0C,0x16,0x30,0x21,0x0E,0x21,0x28,0x21,0x1D,0x1A,0x22,0x29,0x3F,0x62,0x81,0xB7,0xD3,0xDF,0xE7, -0xE9,0xC1,0x67,0x28,0x0E,0x11,0x10,0x16,0x02,0x00,0x08,0x00,0x48,0x8C,0x8C,0xC3,0xDF,0xE0,0xD3,0x7B,0x82,0xCB,0xC9,0x71,0x01,0x00,0x09,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x1C,0x18,0x28,0x98,0xDF,0xC1,0x58,0x3E,0x29,0x3F,0x62,0x81,0xB7,0xD3,0xDF,0xE7, -0xD6,0xB9,0xD7,0x8C,0x59,0x31,0x10,0x1A,0x0C,0x00,0x00,0x00,0x02,0x18,0x1C,0x21,0x31,0x37,0x31,0x1A,0x1D,0x37,0x3D,0x28,0x03,0x00,0x0C,0x02,0x00,0x02,0x09,0x0E,0x0C,0x10,0x18,0x18,0x15,0x4F,0xC1,0xC9,0x71,0x30,0x21,0x29,0x3F,0x62,0x8A,0xB7,0xD3,0xDF,0xE7, -0xC2,0x8A,0xAE,0x63,0x49,0x28,0x09,0x1C,0x22,0x16,0x08,0x00,0x00,0x0C,0x18,0x11,0x10,0x10,0x0C,0x09,0x0C,0x0E,0x0E,0x10,0x11,0x15,0x1A,0x22,0x1C,0x1A,0x1D,0x1A,0x11,0x16,0x15,0x16,0x10,0x0C,0x00,0x00,0x00,0x00,0x1A,0x29,0x3F,0x62,0x81,0xB7,0xD3,0xDF,0xE7, -0xDB,0xDA,0x72,0x08,0x09,0x16,0x22,0x31,0x21,0x18,0x1A,0x16,0x08,0x09,0x15,0x18,0x11,0x16,0x16,0x15,0x11,0x11,0x16,0x16,0x15,0x15,0x11,0x11,0x11,0x15,0x15,0x15,0x11,0x11,0x15,0x18,0x15,0x1C,0x18,0x16,0x1D,0x18,0x21,0x29,0x3E,0x62,0x81,0xB7,0xD3,0xDF,0xE7, -0xE9,0xDF,0x8A,0x1D,0x15,0x1A,0x1C,0x21,0x22,0x1C,0x16,0x16,0x18,0x18,0x18,0x16,0x16,0x18,0x15,0x15,0x15,0x16,0x16,0x15,0x15,0x15,0x16,0x15,0x11,0x11,0x15,0x11,0x11,0x16,0x16,0x1A,0x16,0x16,0x58,0xC1,0xAE,0x59,0x3E,0x30,0x3E,0x62,0x81,0xB7,0xD3,0xDF,0xE7, -0xE7,0x98,0x50,0x36,0x16,0x18,0x09,0x18,0x28,0x1D,0x1A,0x16,0x16,0x16,0x16,0x16,0x16,0x16,0x16,0x15,0x16,0x16,0x15,0x16,0x15,0x15,0x11,0x11,0x11,0x15,0x15,0x15,0x11,0x11,0x11,0x1A,0x15,0x31,0xD2,0xCB,0x59,0x29,0x22,0x29,0x3E,0x59,0x80,0xB0,0xD3,0xDB,0xE7, -0xCB,0xB0,0xDB,0xA4,0x68,0x31,0x10,0x1C,0x28,0x21,0x1C,0x1A,0x16,0x18,0x18,0x1C,0x16,0x18,0x15,0x16,0x18,0x11,0x11,0x15,0x15,0x11,0x11,0x11,0x15,0x11,0x10,0x11,0x15,0x15,0x18,0x1C,0x15,0x18,0x15,0x00,0x02,0x09,0x08,0x21,0x3E,0x59,0x80,0xB0,0xD2,0xDB,0xE7, -0xC9,0xC1,0x80,0x36,0x21,0x1A,0x10,0x29,0x16,0x11,0x1A,0x0E,0x0C,0x15,0x11,0x1A,0x09,0x0E,0x11,0x16,0x10,0x09,0x0E,0x0E,0x16,0x08,0x09,0x0C,0x11,0x0E,0x08,0x0E,0x0C,0x16,0x08,0x0E,0x18,0x18,0x0C,0x08,0x15,0x16,0x1C,0x28,0x37,0x59,0x80,0xB0,0xD2,0xDB,0xE7, -0xE9,0xE0,0x81,0x0C,0x09,0x1A,0x29,0x08,0x0E,0x10,0x1C,0x0E,0x0C,0x11,0x16,0x1C,0x02,0x10,0x0E,0x1C,0x10,0x09,0x0E,0x10,0x1A,0x02,0x0E,0x0C,0x18,0x0E,0x09,0x0E,0x10,0x18,0x08,0x10,0x0C,0x18,0x18,0x16,0x10,0x16,0x21,0x29,0x37,0x58,0x7B,0xAE,0xD2,0xDB,0xE7, -0xE9,0xE0,0x99,0x21,0x1D,0x21,0x1C,0x50,0x72,0x1A,0x1D,0x11,0x71,0x72,0x1A,0x1C,0x16,0x99,0x30,0x1C,0x11,0x59,0x80,0x18,0x1A,0x15,0xA4,0x37,0x18,0x10,0x58,0xAE,0x15,0x18,0x15,0xCB,0x49,0x18,0x11,0x10,0x11,0x16,0x21,0x29,0x3E,0x59,0x80,0xAE,0xD2,0xDB,0xE7, -0xE9,0xE0,0xA3,0x1A,0x21,0x22,0x21,0xB9,0xCB,0x15,0x22,0x15,0xCB,0xC9,0x11,0x1D,0x22,0xE9,0x50,0x18,0x11,0x98,0xE7,0x10,0x1C,0x15,0xE9,0x68,0x16,0x10,0x71,0xE9,0x16,0x1A,0x10,0xE7,0x67,0x16,0x15,0x15,0x11,0x18,0x22,0x29,0x3E,0x62,0x80,0xB0,0xD2,0xDB,0xE7, -0xE9,0xE7,0xA3,0x1D,0x1C,0x28,0x30,0xDF,0xCB,0x1D,0x29,0x28,0xE0,0xD2,0x1A,0x22,0x50,0xE9,0x62,0x21,0x21,0xB0,0xE9,0x16,0x1C,0x29,0xE0,0x79,0x1C,0x1C,0x71,0xDB,0x21,0x18,0x21,0xB9,0x79,0x1A,0x15,0x11,0x10,0x18,0x22,0x30,0x48,0x63,0x8A,0xB9,0xD3,0xDF,0xE7, -0xE9,0xE7,0xD6,0x48,0x1C,0x31,0x18,0x7B,0x59,0x0C,0x16,0x18,0x62,0x50,0x0C,0x16,0x21,0x72,0x28,0x10,0x11,0x48,0x71,0x09,0x10,0x16,0x71,0x36,0x0E,0x0E,0x30,0x50,0x11,0x0E,0x0C,0x49,0x30,0x10,0x0C,0x08,0x10,0x1D,0x28,0x36,0x49,0x68,0x98,0xC2,0xD7,0xDF,0xE7, -0xE9,0xE9,0xE0,0xDA,0xC9,0xAE,0x7B,0x49,0x28,0x10,0x22,0x22,0x28,0x22,0x15,0x21,0x1D,0x30,0x1C,0x1D,0x1C,0x22,0x22,0x18,0x1D,0x16,0x31,0x21,0x21,0x15,0x29,0x31,0x1D,0x1A,0x1A,0x29,0x1C,0x21,0x21,0x1D,0x22,0x28,0x30,0x3E,0x58,0x79,0xA4,0xCB,0xDA,0xE0,0xE9, -0xE9,0xE9,0xE7,0xDF,0xD3,0xB9,0x98,0x59,0x36,0x22,0x31,0x3F,0x49,0x1D,0x21,0x28,0x67,0x1D,0x1C,0x22,0x29,0x4F,0x1A,0x1D,0x28,0x58,0x1C,0x1A,0x22,0x29,0x4F,0x1A,0x21,0x28,0x59,0x1C,0x22,0x28,0x28,0x28,0x29,0x31,0x37,0x4F,0x67,0x8A,0xB7,0xD3,0xDB,0xE7,0xE9, -0xE9,0xE9,0xE7,0xE0,0xD7,0xC9,0xAE,0x81,0x67,0x58,0x48,0x3E,0x37,0x36,0x36,0x36,0x36,0x36,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x31,0x36,0x36,0x36,0x3E,0x48,0x50,0x63,0x7B,0xA3,0xC2,0xD7,0xDF,0xE7,0xE9, -0xE9,0xE9,0xE9,0xE7,0xDB,0xD3,0xC1,0xA4,0x81,0x72,0x63,0x59,0x50,0x50,0x4F,0x4F,0x4F,0x4F,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x49,0x4F,0x50,0x58,0x63,0x71,0x80,0x99,0xB9,0xD2,0xDB,0xE0,0xE9,0xE9, -0xE9,0xE9,0xE9,0xE7,0xE0,0xDA,0xD3,0xC2,0xB0,0x99,0x8A,0x7B,0x79,0x72,0x71,0x71,0x71,0x71,0x68,0x68,0x68,0x68,0x68,0x68,0x68,0x68,0x67,0x67,0x67,0x67,0x67,0x67,0x68,0x68,0x68,0x68,0x68,0x71,0x71,0x72,0x7B,0x8A,0x99,0xAE,0xC1,0xD2,0xDA,0xDF,0xE7,0xE9,0xE9, -0xE9,0xE9,0xE9,0xE9,0xE7,0xE0,0xDB,0xD6,0xD2,0xC2,0xB7,0xAE,0xA3,0x99,0x99,0x99,0x99,0x98,0x98,0x98,0x98,0x98,0x98,0x98,0x98,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x8C,0x98,0x98,0x98,0x98,0x98,0x99,0xA3,0xA4,0xB7,0xC2,0xCB,0xD6,0xDA,0xDF,0xE7,0xE9,0xE9,0xE9, -0xE9,0xE9,0xE9,0xE9,0xE9,0xE7,0xE0,0xDF,0xDA,0xD7,0xD3,0xCB,0xC9,0xC2,0xC2,0xC2,0xC2,0xC1,0xC1,0xC1,0xC1,0xC1,0xC1,0xC1,0xC1,0xC1,0xB9,0xB9,0xB9,0xB9,0xB9,0xB9,0xC1,0xC1,0xC1,0xC1,0xC1,0xC1,0xC2,0xC2,0xCB,0xD3,0xD7,0xDA,0xDF,0xE0,0xE7,0xE9,0xE9,0xE9,0xE9, -0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE7,0xE0,0xDF,0xDB,0xDA,0xDA,0xD7,0xD7,0xD7,0xD7,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD6,0xD7,0xD7,0xD7,0xDA,0xDB,0xDF,0xE0,0xE7,0xE7,0xE9,0xE9,0xE9,0xE9,0xE9, -0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE7,0xE7,0xE0,0xE0,0xE0,0xE0,0xE0,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xDF,0xE0,0xE0,0xE7,0xE7,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9, -0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE7,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9,0xE9, -}; diff --git a/src/southbridge/amd/cs5530/chip.h b/src/southbridge/amd/cs5530/chip.h deleted file mode 100644 index fec40ef..0000000 --- a/src/southbridge/amd/cs5530/chip.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef SOUTHBRIDGE_AMD_CS5530_CHIP_H -#define SOUTHBRIDGE_AMD_CS5530_CHIP_H - -struct southbridge_amd_cs5530_config { - int ide0_enable:1; - int ide1_enable:1; -}; - -#endif /* SOUTHBRIDGE_AMD_CS5530_CHIP_H */ diff --git a/src/southbridge/amd/cs5530/cs5530.c b/src/southbridge/amd/cs5530/cs5530.c deleted file mode 100644 index 2b97fe0..0000000 --- a/src/southbridge/amd/cs5530/cs5530.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Datasheet: - * - Name: Geode CS5530A I/O Companion Multi-Function South Bridge - * - URL: http://www.national.com/pf/CS/CS5530A.html - * - PDF: http://www.national.com/ds.cgi/CS/CS5530A.pdf - * - Revision: 1.1 (May 2001) - */ - -/* Datasheet: - * - Name: AMD Geode CS5530A Companion Device Data Book - * - URL: http://www.amd.com/us-en/ConnectivitySolutions/ProductInformation/0,,50_2330... - * - PDF: http://www.amd.com/files/connectivitysolutions/geode/5530a_db_v11.pdf - * - Date: October 2003 - * - Publication ID: May 2001, Revision 1.1 - */ - -/* Datasheet: - * - Name: AMD Geode Solutions - * Integrated Processors, Companion Devices, and System Platforms - * (Geode CS5530 I/O Companion Multi-Function South Bridge) - * - URL: http://www.amd.com/us-en/ConnectivitySolutions/ProductInformation/0,,50_2330... - * - PDF: http://www.amd.com/files/connectivitysolutions/geode/5530_db_v41.pdf - * - Date: September 2004 - */ - -/* Note: The CS3350 / CS3350A are mostly identical. This code handles both. */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include "cs5530.h" - -void cs5530_enable(device_t dev) -{ -} - -struct chip_operations southbridge_amd_cs5530_ops = { - CHIP_NAME("AMD Geode CS5530/CS5530A I/O Companion Southbridge") - .enable_dev = cs5530_enable, -}; diff --git a/src/southbridge/amd/cs5530/cs5530.h b/src/southbridge/amd/cs5530/cs5530.h deleted file mode 100644 index b90e218..0000000 --- a/src/southbridge/amd/cs5530/cs5530.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef SOUTHBRIDGE_AMD_CS5530_CS5530_H -#define SOUTHBRIDGE_AMD_CS5530_CS5530_H - -#if !defined(__PRE_RAM__) -#include "chip.h" -void cs5530_enable(device_t dev); -#endif - -#define DECODE_CONTROL_REG2 0x5b /* F0 index 0x5b */ -#define ROM_AT_LOGIC_CONTROL_REG 0x52 /* F0 index 0x52 */ - -#define LOWER_ROM_ADDRESS_RANGE (1 << 0) -#define ROM_WRITE_ENABLE (1 << 1) -#define UPPER_ROM_ADDRESS_RANGE (1 << 2) -#define BIOS_ROM_POSITIVE_DECODE (1 << 5) - -/* Selects PCI positive decoding for accesses to the configured ROM space. */ -#define BIOS_ROM_POSITIVE_DECODE (1 << 5) - -/* Primary IDE Controller Positive Decode (i.e., enable it). */ -#define PRIMARY_IDE_ENABLE (1 << 3) - -/* Secondary IDE Controller Positive Decode (i.e., enable it). */ -#define SECONDARY_IDE_ENABLE (1 << 4) - -#endif /* SOUTHBRIDGE_AMD_CS5530_CS5530_H */ diff --git a/src/southbridge/amd/cs5530/enable_rom.c b/src/southbridge/amd/cs5530/enable_rom.c deleted file mode 100644 index 1c80797..0000000 --- a/src/southbridge/amd/cs5530/enable_rom.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include "cs5530.h" - -static void cs5530_enable_rom(void) -{ - uint8_t reg8; - - /* So far all CS5530(A) ISA bridges we've seen are at 00:12.0. */ - device_t dev = PCI_DEV(0, 0x12, 0); - - /* - * Decode 0x000E0000-0x000FFFFF (128 KB), not just 64 KB, and - * decode 0xFF000000-0xFFFFFFFF (16 MB), not just 256 KB. - * - * Make the ROM write-protected. - */ - reg8 = pci_read_config8(dev, ROM_AT_LOGIC_CONTROL_REG); - reg8 |= LOWER_ROM_ADDRESS_RANGE; - reg8 |= UPPER_ROM_ADDRESS_RANGE; - reg8 &= ~ROM_WRITE_ENABLE; - pci_write_config8(dev, ROM_AT_LOGIC_CONTROL_REG, reg8); - - /* Set positive decode on ROM. */ - reg8 = pci_read_config8(dev, DECODE_CONTROL_REG2); - reg8 |= BIOS_ROM_POSITIVE_DECODE; - pci_write_config8(dev, DECODE_CONTROL_REG2, reg8); -} diff --git a/src/southbridge/amd/cs5530/ide.c b/src/southbridge/amd/cs5530/ide.c deleted file mode 100644 index 74761fb..0000000 --- a/src/southbridge/amd/cs5530/ide.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "cs5530.h" - -/** - * Initialize the IDE controller. - * - * Depending on the configuration variables 'ide0_enable' and 'ide1_enable' - * enable or disable the primary and secondary IDE interface, respectively. - * - * @param dev The device to use. - */ -static void ide_init(struct device *dev) -{ - uint8_t reg8; - struct southbridge_amd_cs5530_config *conf = dev->chip_info; - - reg8 = pci_read_config8(dev, DECODE_CONTROL_REG2); - - /* Enable/disable the primary IDE interface. */ - if (conf->ide0_enable) { - reg8 |= PRIMARY_IDE_ENABLE; - } else { - reg8 &= ~(PRIMARY_IDE_ENABLE); - } - - /* Enable/disable the secondary IDE interface. */ - if (conf->ide1_enable) { - reg8 |= SECONDARY_IDE_ENABLE; - } else { - reg8 &= ~(SECONDARY_IDE_ENABLE); - } - - pci_write_config8(dev, DECODE_CONTROL_REG2, reg8); - - printk(BIOS_INFO, "%s IDE interface %s\n", "Primary", - conf->ide0_enable ? "enabled" : "disabled"); - printk(BIOS_INFO, "%s IDE interface %s\n", "Secondary", - conf->ide1_enable ? "enabled" : "disabled"); -} - -static struct device_operations ide_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = ide_init, - .enable = 0, - .scan_bus = scan_static_bus, - .ops_pci = 0, -}; - -static const struct pci_driver ide_driver __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_CYRIX, - .device = PCI_DEVICE_ID_CYRIX_5530_IDE, -}; diff --git a/src/southbridge/amd/cs5530/isa.c b/src/southbridge/amd/cs5530/isa.c deleted file mode 100644 index ef3d93a..0000000 --- a/src/southbridge/amd/cs5530/isa.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "cs5530.h" - -static void cs5530_read_resources(device_t dev) -{ - struct resource* res; - - pci_dev_read_resources(dev); - - res = new_resource(dev, 1); - res->base = 0x0UL; - res->size = 0x1000UL; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - -static void isa_init(struct device *dev) -{ -} - -static struct device_operations isa_ops = { - .read_resources = cs5530_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = isa_init, - .enable = 0, - .scan_bus = scan_static_bus, -}; - -static const struct pci_driver isa_driver __pci_driver = { - .ops = &isa_ops, - .vendor = PCI_VENDOR_ID_CYRIX, - .device = PCI_DEVICE_ID_CYRIX_5530_LEGACY, -}; diff --git a/src/southbridge/amd/cs5530/pirq.c b/src/southbridge/amd/cs5530/pirq.c deleted file mode 100644 index f26b722..0000000 --- a/src/southbridge/amd/cs5530/pirq.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -#if (CONFIG_PIRQ_ROUTE==1 && CONFIG_GENERATE_PIRQ_TABLE==1) -void pirq_assign_irqs(const unsigned char pIntAtoD[4]) -{ - device_t pdev; - - pdev = dev_find_device(PCI_VENDOR_ID_CYRIX, - PCI_DEVICE_ID_CYRIX_5530_LEGACY, 0); - - if (pdev) { - pci_write_config8(pdev, 0x5c, (pIntAtoD[1] << 4 | pIntAtoD[0])); - pci_write_config8(pdev, 0x5d, (pIntAtoD[3] << 4 | pIntAtoD[2])); - } -} -#endif diff --git a/src/southbridge/amd/cs5530/vga.c b/src/southbridge/amd/cs5530/vga.c deleted file mode 100644 index 66ab239..0000000 --- a/src/southbridge/amd/cs5530/vga.c +++ /dev/null @@ -1,495 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Juergen Beisert juergen@kreuzholzen.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA - */ - -/** - * @brief Activate the VGA feature in a Geode GX1 based system with one - * of five possible VESA modes: VGA, SVGA, XGA, 4:3 SXGA and 5:4 SXGA. - * Also it is prepared to display a splash screen. - * - * In a Geode GX1 environment the companion CS5530 is the VGA - * interface only. It contains a PLL for pixel clock generation, - * DACs to generate the analogue RGB signals, drivers for HSYNC - * and VSYNC and drivers for a digital flatpanel. - * The graphic feature itself (framebuffer, acceleration unit) - * is not part of this device. It is part of the CPU device. - * But both depend on each other, we cannot divide them into - * different drivers. So this driver is not only a CS5530 driver, - * it is also a Geode GX1 chipset graphic driver. - */ -#include <arch/io.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <console/console.h> -#include <cpu/amd/gx1def.h> -#include <delay.h> - -#if CONFIG_GX1_VIDEO -/* - * Some register descriptions that are no listed in cpu/amd/gx1def.h - */ -#define CS5530_DOT_CLK_CONFIG 0x0024 -#define CS5530_DISPLAY_CONFIG 0x0004 - -#define DC_FB_ST_OFFSET 0x8310 /* framebuffer start offset */ -#define DC_CB_ST_OFFSET 0x8314 /* compression start offset */ -#define DC_CURS_ST_OFFSET 0x8318 /* cursor start offset */ -#define DC_VID_ST_OFFSET 0x8320 /* video start offset */ -#define DC_LINE_DELTA 0x8324 /* fb and cb skip counts */ -#define DC_BUF_SIZE 0x8328 /* fb and cb line size */ -#define DC_H_TIMING_1 0x8330 /* horizontal timing... */ -#define DC_H_TIMING_2 0x8334 -#define DC_H_TIMING_3 0x8338 -#define DC_FP_H_TIMING 0x833C -#define DC_V_TIMING_1 0x8340 /* vertical timing... */ -#define DC_V_TIMING_2 0x8344 -#define DC_V_TIMING_3 0x8348 -#define DC_FP_V_TIMING 0x834C -#define DC_TIMING_CFG 0x8308 -#define DC_OUTPUT_CFG 0x830C - -/** - * what colour depth should be used as default (in bpp) - * Note: Currently no other value than 16 is supported - */ -#define COLOUR_DEPTH 16 - -/** - * Support for a few basic video modes - * Note: all modes only for CRT. The flatpanel feature is - * not supported here (due to the lack of hardware to test) - */ -struct video_mode { - int pixel_clock; /*<< pixel clock in Hz */ - unsigned long pll_value; /*<< pll register value for this clock */ - - int visible_pixel; /*<< visible pixels in one line */ - int hsync_start; /*<< start of hsync behind visible pixels */ - int hsync_end; /*<< end of hsync behind its start */ - int line_length; /*<< whole line length */ - - int visible_lines; /*<< visible lines on screen */ - int vsync_start; /*<< vsync start behind last visible line */ - int vsync_end; /*<< end of vsync behind its start */ - int picture_length; /*<< whole screen length */ - - int sync_pol; /*<< 0: low, 1: high, bit 0 hsync, bit 1 vsync */ -}; - -/* - * values for .sync_pol in struct video_mode - */ -#define HSYNC_HIGH_POL 0 -#define HSYNC_LOW_POL 1 -#define VSYNC_HIGH_POL 0 -#define VSYNC_LOW_POL 2 - -/** - * 640x480 @ 72Hz hsync: 37.9kHz - * VESA standard mode for classic 4:3 monitors - * Copied from X11: - * ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync - */ -static const struct video_mode mode_640x480 = { - .pixel_clock = 31500000, - .pll_value = 0x33915801, - - .visible_pixel = 640, - .hsync_start = 664, - .hsync_end = 704, /* 1.27 us sync length */ - .line_length = 832, /* 26.39us */ - - .visible_lines = 480, - .vsync_start = 489, - .vsync_end = 491, - .picture_length = 520, /* 13.89ms */ - - .sync_pol = HSYNC_LOW_POL | VSYNC_LOW_POL, -}; - -/** - * 800x600 @ 72Hz hsync: 48.1kHz - * VESA standard mode for classic 4:3 monitors - * Copied from X11: - * ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync - */ -static const struct video_mode mode_800x600 = { - .pixel_clock = 50000000, - .pll_value = 0x23088801, - - .visible_pixel = 800, - .hsync_start = 856, - .hsync_end = 976, - .line_length = 1040, /* 20.8us */ - - .visible_lines = 600, - .vsync_start = 637, - .vsync_end = 643, - .picture_length = 666, /* 13.89ms */ - - .sync_pol = HSYNC_HIGH_POL | VSYNC_HIGH_POL, -}; - -/** - * 1024x768 @ 70Hz (VESA) hsync: 56.5kHz - * Standard mode for classic 4:3 monitors - * Copied from X11: - * ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync - */ -static const struct video_mode mode_1024x768 = { - .pixel_clock = 75000000, - .pll_value = 0x37E22801, - - .visible_pixel = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .line_length = 1328, /* 17.7us */ - - .visible_lines = 768, - .vsync_start = 771, - .vsync_end = 777, - .picture_length = 806, /* 14.3us */ - - .sync_pol = HSYNC_LOW_POL | VSYNC_LOW_POL, -}; - -/** - * 1280x960 @ 60Hz (VESA) hsync: 60.0kHz - * Mode for classic 4:3 monitors - * Copied from X11: - * ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync - */ -static const struct video_mode mode_1280x960 = { - .pixel_clock = 108000000, - .pll_value = 0x2710C805, - - .visible_pixel = 1280, - .hsync_start = 1376, - .hsync_end = 1488, - .line_length = 1800, /* 16.67us */ - - .visible_lines = 960, - .vsync_start = 961, - .vsync_end = 964, - .picture_length = 1000, /* 16.67ms */ - - .sync_pol = HSYNC_HIGH_POL | VSYNC_HIGH_POL, -}; - -/** - * 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz - * Mode for modern 5:4 flat screens - * Copied from X11: - * ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync - */ -static const struct video_mode mode_1280x1024 = { - .pixel_clock = 108000000, - .pll_value = 0x2710C805, - - .visible_pixel = 1280, - .hsync_start = 1328, - .hsync_end = 1440, - .line_length = 1688, /* 15.6us */ - - .visible_lines = 1024, - .vsync_start = 1025, - .vsync_end = 1028, - .picture_length = 1066, - - .sync_pol = HSYNC_HIGH_POL | VSYNC_HIGH_POL, -}; - -/** - * List of supported common modes - */ -static const struct video_mode *modes[] = { - &mode_640x480, /* CONFIG_GX1_VIDEOMODE = 0 */ - &mode_800x600, /* CONFIG_GX1_VIDEOMODE = 1 */ - &mode_1024x768, /* CONFIG_GX1_VIDEOMODE = 2 */ - &mode_1280x960, /* CONFIG_GX1_VIDEOMODE = 3 */ - &mode_1280x1024 /* CONFIG_GX1_VIDEOMODE = 4 */ -}; - -/* make a sanity check at buildtime */ -#if CONFIG_GX1_VIDEOMODE > 4 -# error Requested video mode is unknown! -#endif - -/** - * Setup the pixel PLL in the companion chip - * @param[in] base register's base address - * @param[in] pll_val pll register value to be set - * - * The PLL to program here is located in the CS5530 - */ -static void cs5530_set_clock_frequency(u32 io_base, unsigned long pll_val) -{ - unsigned long reg; - - /* disable the PLL first, reset and power it down */ - reg = read32(io_base+CS5530_DOT_CLK_CONFIG) & ~0x20; - reg |= 0x80000100; - write32(io_base+CS5530_DOT_CLK_CONFIG, reg); - - /* write the new PLL setting */ - reg |= (pll_val & ~0x80000920); - write32(io_base+CS5530_DOT_CLK_CONFIG, reg); - - mdelay(1); /* wait for control voltage to be 0V */ - - /* enable the PLL */ - reg |= 0x00000800; - write32(io_base+CS5530_DOT_CLK_CONFIG, reg); - - /* clear reset */ - reg &= ~0x80000000; - write32(io_base+CS5530_DOT_CLK_CONFIG, reg); - - /* clear bypass */ - reg &= ~0x00000100; - write32(io_base+CS5530_DOT_CLK_CONFIG, reg); -} - -/** - * Setup memory layout - * @param[in] gx_base GX register area - * @param[in] mode Data about the video mode to setup - * - * Memory layout must be setup in Geode GX1's chipset. - * Note: This routine assumes unlocked DC registers. - * Note: Using compressed buffer is not supported yet! - * (makes more sense later, but not while booting) - * - * At this point a check is missed if the requested video - * mode is possible with the provided video memory. - * Check if symbol CONFIG_VIDEO_MB is at least: - * - 1 (=1MiB) for VGA and SVGA - * - 2 (=2MiB) for XGA - * - 4 (=4MiB) for SXGA - */ -static void dc_setup_layout(u32 gx_base, const struct video_mode *mode) -{ - u32 base = 0x00000000; - - write32(gx_base + DC_FB_ST_OFFSET, base); - - base += (COLOUR_DEPTH>>3) * mode->visible_pixel * mode->visible_lines; - - write32(gx_base + DC_CB_ST_OFFSET, base); - write32(gx_base + DC_CURS_ST_OFFSET, base); - write32(gx_base + DC_VID_ST_OFFSET, base); - write32(gx_base + DC_LINE_DELTA, ((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 2); - write32(gx_base + DC_BUF_SIZE, ((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 3); -} - -/** - * Setup the HSYNC/VSYNC, active video timing - * @param[in] gx_base GX register area - * @param[in] mode Data about the video mode to setup - * - * Sync signal generation is done in Geode GX1's chipset. - * Note: This routine assumes unlocked DC registers - * - * |<------------------------- htotal ----------------------------->| - * |<------------ hactive -------------->| | - * | hblankstart-->| | - * | hblankend-->| - * | hsyncstart-->| | - * | hsyncend-->| | - * |#####################################___________________________| RGB data - * |______________________________________________---------_________| HSYNC - * - * |<------------------------- vtotal ----------------------------->| - * |<------------ vactive -------------->| | - * | vblankstart-->| | - * | vblankend-->| - * | vsyncstart-->| | - * | vsyncend-->| | - * |#####################################___________________________| line data - * |______________________________________________---------_________| YSYNC - */ -static void dc_setup_timing(u32 gx_base, const struct video_mode *mode) -{ - u32 hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal; - u32 vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; - - hactive = mode->visible_pixel & 0x7FF; - hblankstart = hactive; - hsyncstart = mode->hsync_start & 0x7FF; - hsyncend = mode->hsync_end & 0x7FF; - hblankend = mode->line_length & 0x7FF; - htotal = hblankend; - - vactive = mode->visible_lines & 0x7FF; - vblankstart = vactive; - vsyncstart = mode->vsync_start & 0x7FF; - vsyncend = mode->vsync_end & 0x7FF; - vblankend = mode->picture_length & 0x7FF; - vtotal = vblankend; - - /* row description */ - write32(gx_base + DC_H_TIMING_1, (hactive - 1) | ((htotal - 1) << 16)); - /* horizontal blank description */ - write32(gx_base + DC_H_TIMING_2, (hblankstart - 1) | ((hblankend - 1) << 16)); - /* horizontal sync description */ - write32(gx_base + DC_H_TIMING_3, (hsyncstart - 1) | ((hsyncend - 1) << 16)); - write32(gx_base + DC_FP_H_TIMING, (hsyncstart - 1) | ((hsyncend - 1) << 16)); - - /* line description */ - write32(gx_base + DC_V_TIMING_1, (vactive - 1) | ((vtotal - 1) << 16)); - /* vertical blank description */ - write32(gx_base + DC_V_TIMING_2, (vblankstart - 1) | ((vblankend - 1) << 16)); - /* vertical sync description */ - write32(gx_base + DC_V_TIMING_3, (vsyncstart - 1) | ((vsyncend - 1) << 16)); - write32(gx_base + DC_FP_V_TIMING, (vsyncstart - 2) | ((vsyncend - 2) << 16)); -} - -/** - * Setup required internals to bring the mode up and running - * @param[in] gx_base GX register area - * @param[in] mode Data about the video mode to setup - * - * Must be setup in Geode GX1's chipset. - * Note: This routine assumes unlocked DC registers. - */ -static void cs5530_activate_mode(u32 gx_base, const struct video_mode *mode) -{ - write32(gx_base + DC_GENERAL_CFG, 0x00000080); - mdelay(1); - dc_setup_layout(gx_base,mode); - dc_setup_timing(gx_base,mode); - - write32(gx_base + DC_GENERAL_CFG, 0x2000C581); - write32(gx_base + DC_TIMING_CFG, 0x0000002F); - write32(gx_base + DC_OUTPUT_CFG, 0x00003004); -} - -/** - * Activate the current mode to be "visible" outside - * @param[in] gx_base GX register area - * @param[in] mode Data about the video mode to setup - * - * As we now activate the interface this must be done - * in the CS5530 - */ -static void cs5530_activate_video(u32 io_base, const struct video_mode *mode) -{ - u32 val; - - val = (u32)mode->sync_pol << 8; - write32(io_base + CS5530_DISPLAY_CONFIG, val | 0x0020002F); -} - -#if CONFIG_SPLASH_GRAPHIC - -/* - * This bitmap file must provide: - * int width: pixel count in one line - * int height: line count - * int colours: ount of used colour - * unsigned long colour_map[]: RGB 565 colours to be used - * unsigned char bitmap[]: index per pixel into colour_map[], width*height pixels - */ -#include "bitmap.c" - -/* - * show a boot splash screen in the right lower corner of the screen - * swidth: screen width in pixel - * sheight: screen height in lines - * pitch: line pitch in bytes - * base: screen base address - * - * This routine assumes we are using a 16 bit colour depth! - */ -static void show_boot_splash_16(u32 swidth, u32 sheight, u32 pitch,void *base) -{ - int word_count,i; - unsigned short *adr; - u32 xstart,ystart,x,y; - /* - * fill the screen with the colour of the - * left top pixel in the graphic - */ - word_count = pitch * sheight; - adr = (unsigned short*)base; - for (i = 0; i < word_count; i++, adr++) - *adr = colour_map[bitmap[0]]; - - /* - * paint the splash - */ - xstart = swidth-width; - ystart = sheight-height; - for (y = 0; y < height; y++) { - adr=(unsigned short*)(base + pitch*(y+ystart) + 2 * xstart); - for (x = 0; x < width; x++) { - *adr=(unsigned short)colour_map[(int)bitmap[x + y * width]]; - adr++; - } - } -} -#else -# define show_boot_splash_16(w, x, y , z) -#endif - -/** - * coreboot management part - * @param[in] dev Info about the PCI device to initialise - */ -static void cs5530_vga_init(device_t dev) -{ - const struct video_mode *mode; - u32 io_base, gx_base; - - io_base = pci_read_config32(dev, 0x10); - gx_base = GX_BASE; - mode = modes[CONFIG_GX1_VIDEOMODE]; - - printk(BIOS_DEBUG, "Setting up video mode %dx%d with %d Hz clock\n", - mode->visible_pixel, mode->visible_lines, mode->pixel_clock); - - cs5530_set_clock_frequency(io_base, mode->pll_value); - - write32(gx_base + DC_UNLOCK, DC_UNLOCK_MAGIC); - - show_boot_splash_16(mode->visible_pixel, mode->visible_lines, - mode->visible_pixel * (COLOUR_DEPTH>>3), (void*)(GX_BASE + 0x800000)); - - cs5530_activate_mode(gx_base, mode); - - cs5530_activate_video(io_base, mode); - write32(gx_base + DC_UNLOCK, 0x00000000); -} - -static struct device_operations vga_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = cs5530_vga_init, - .enable = NULL, /* not required */ -}; - -static const struct pci_driver vga_pci_driver __pci_driver = { - .ops = &vga_ops, - .vendor = PCI_VENDOR_ID_CYRIX, - .device = PCI_DEVICE_ID_CYRIX_5530_VIDEO, -}; - -#endif /* #if CONFIG_GX1_VIDEO */