Isaac Christensen (isaac.christensen@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6855
-gerrit
commit 41acdcf6930490cb96b90b323069005001644cad Author: Stefan Reinauer reinauer@chromium.org Date: Mon Nov 4 17:38:32 2013 -0800
tpm: Clean up I2C TPM driver
Drop a lot of u-boot-isms and share common TIS API between I2C driver and LPC driver.
Signed-off-by: Stefan Reinauer reinauer@google.com
Change-Id: I43be8eea0acbdaef58ef256a2bc5336b83368a0e Reviewed-on: https://chromium-review.googlesource.com/175670 Commit-Queue: Stefan Reinauer reinauer@chromium.org Tested-by: Stefan Reinauer reinauer@chromium.org Reviewed-by: David Hendricks dhendrix@chromium.org (cherry picked from commit 3fc8515b9dcef66998658e1aa5c020d22509810c) Signed-off-by: Isaac Christensen isaac.christensen@se-eng.com --- src/drivers/i2c/tpm/Kconfig | 5 + src/drivers/i2c/tpm/Makefile.inc | 4 +- src/drivers/i2c/tpm/tis.c | 182 ++++++++ src/drivers/i2c/tpm/tis.h | 74 ---- src/drivers/i2c/tpm/tis_i2c.c | 103 ----- src/drivers/i2c/tpm/tpm.c | 555 +++++++++++++++++++++---- src/drivers/i2c/tpm/tpm.h | 19 - src/drivers/i2c/tpm/tpm_tis_i2c.c | 578 -------------------------- src/drivers/pc80/tpm.c | 2 +- src/include/pc80/tpm.h | 29 -- src/include/tpm.h | 69 +++ src/vendorcode/google/chromeos/vboot.c | 2 +- src/vendorcode/google/chromeos/vboot_loader.c | 2 +- 13 files changed, 746 insertions(+), 878 deletions(-)
diff --git a/src/drivers/i2c/tpm/Kconfig b/src/drivers/i2c/tpm/Kconfig index 2456204..cb754bd 100644 --- a/src/drivers/i2c/tpm/Kconfig +++ b/src/drivers/i2c/tpm/Kconfig @@ -2,6 +2,11 @@ config I2C_TPM bool "I2C TPM" depends on !PC80 # for now
+config DRIVER_TPM_I2C_BUS + hex "I2C TPM chip bus" + default 9 # FIXME, workaround for Kconfig BS + depends on I2C_TPM + config DRIVER_TPM_I2C_ADDR hex "I2C TPM chip address" default 2 # FIXME, workaround for Kconfig BS diff --git a/src/drivers/i2c/tpm/Makefile.inc b/src/drivers/i2c/tpm/Makefile.inc index 74d9b7e..e06097f 100644 --- a/src/drivers/i2c/tpm/Makefile.inc +++ b/src/drivers/i2c/tpm/Makefile.inc @@ -1,2 +1,2 @@ -ramstage-$(CONFIG_I2C_TPM) += tis_i2c.c tpm.c tpm_tis_i2c.c -romstage-$(CONFIG_I2C_TPM) += tis_i2c.c tpm.c tpm_tis_i2c.c +ramstage-$(CONFIG_I2C_TPM) += tis.c tpm.c +romstage-$(CONFIG_I2C_TPM) += tis.c tpm.c diff --git a/src/drivers/i2c/tpm/tis.c b/src/drivers/i2c/tpm/tis.c new file mode 100644 index 0000000..3a5f519 --- /dev/null +++ b/src/drivers/i2c/tpm/tis.c @@ -0,0 +1,182 @@ +/* + * Copyright (C) 2011 Infineon Technologies + * Copyright 2013 Google Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdint.h> +#include <string.h> +#include <assert.h> +#include <delay.h> +#include <arch/byteorder.h> +#include <device/i2c.h> +#include <tpm.h> +#include "tpm.h" + +#include <console/console.h> + +/* global structure for tpm chip data */ +struct tpm_chip g_chip; + +#define TPM_CMD_COUNT_BYTE 2 +#define TPM_CMD_ORDINAL_BYTE 6 + +int tis_open(void) +{ + int rc; + + if (g_chip.is_open) { + printk(BIOS_DEBUG, "tis_open() called twice.\n"); + return -1; + } + + rc = tpm_vendor_init(CONFIG_DRIVER_TPM_I2C_BUS, + CONFIG_DRIVER_TPM_I2C_ADDR); + + if (rc < 0) + g_chip.is_open = 0; + + if (rc) { + return -1; + } + + return 0; +} + +int tis_close(void) +{ + if (g_chip.is_open) { + tpm_vendor_cleanup(&g_chip); + g_chip.is_open = 0; + } + + return 0; +} + +int tis_init(void) +{ + int bus = CONFIG_DRIVER_TPM_I2C_BUS; + int chip = CONFIG_DRIVER_TPM_I2C_ADDR; + + /* + * Probe TPM twice; the first probing might fail because TPM is asleep, + * and the probing can wake up TPM. + */ + uint8_t tmp; + + if (i2c_read(bus, chip, 0, 0, &tmp, sizeof(tmp)) && + i2c_read(bus, chip, 0, 0, &tmp, sizeof(tmp))) + return -1; + + return 0; +} + +static ssize_t tpm_transmit(const uint8_t *buf, size_t bufsiz) +{ + int rc; + uint32_t count, ordinal; + + struct tpm_chip *chip = &g_chip; + + memcpy(&count, buf + TPM_CMD_COUNT_BYTE, sizeof(count)); + count = be32_to_cpu(count); + memcpy(&ordinal, buf + TPM_CMD_ORDINAL_BYTE, sizeof(ordinal)); + ordinal = be32_to_cpu(ordinal); + + if (count == 0) { + printk(BIOS_DEBUG, "tpm_transmit: no data\n"); + return -1; + } + if (count > bufsiz) { + printk(BIOS_DEBUG, "tpm_transmit: invalid count value %x %zx\n", + count, bufsiz); + return -1; + } + + ASSERT(chip->vendor.send); + rc = chip->vendor.send(chip, (uint8_t *) buf, count); + if (rc < 0) { + printk(BIOS_DEBUG, "tpm_transmit: tpm_send error\n"); + goto out; + } + + if (chip->vendor.irq) + goto out_recv; + + int timeout = 2 * 60 * 1000; /* two minutes timeout */ + while (timeout) { + ASSERT(chip->vendor.status); + uint8_t status = chip->vendor.status(chip); + if ((status & chip->vendor.req_complete_mask) == + chip->vendor.req_complete_val) { + goto out_recv; + } + + if ((status == chip->vendor.req_canceled)) { + printk(BIOS_DEBUG, "tpm_transmit: Operation Canceled\n"); + rc = -1; + goto out; + } + mdelay(TPM_TIMEOUT); + timeout--; + } + + ASSERT(chip->vendor.cancel); + chip->vendor.cancel(chip); + printk(BIOS_DEBUG, "tpm_transmit: Operation Timed out\n"); + rc = -1; //ETIME; + goto out; + +out_recv: + + rc = chip->vendor.recv(chip, (uint8_t *) buf, TPM_BUFSIZE); + if (rc < 0) + printk(BIOS_DEBUG, "tpm_transmit: tpm_recv: error %zd\n", rc); +out: + return rc; +} + +int tis_sendrecv(const uint8_t *sendbuf, size_t sbuf_size, + uint8_t *recvbuf, size_t *rbuf_len) +{ + uint8_t buf[TPM_BUFSIZE]; + + if (sizeof(buf) < sbuf_size) + return -1; + + memcpy(buf, sendbuf, sbuf_size); + + int len = tpm_transmit(buf, sbuf_size); + + if (len < 10) { + *rbuf_len = 0; + return -1; + } + + if (len > *rbuf_len) { + *rbuf_len = len; + return -1; + } + + memcpy(recvbuf, buf, len); + *rbuf_len = len; + + return 0; +} diff --git a/src/drivers/i2c/tpm/tis.h b/src/drivers/i2c/tpm/tis.h deleted file mode 100644 index 348f9a8..0000000 --- a/src/drivers/i2c/tpm/tis.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright 2011 Google Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __DRIVERS_TPM_TPM_H__ -#define __DRIVERS_TPM_TPM_H__ - -#include <stddef.h> -#include <stdint.h> - -void tis_set_i2c_bus(unsigned _bus); - -/* - * tis_init() - * - * Initialize the TPM device. Returns 0 on success or -1 on - * failure (in case device probing did not succeed). - */ -int tis_init(void); - -/* - * tis_open() - * - * Requests access to locality 0 for the caller. After all commands have been - * completed the caller is supposed to call tis_close(). - * - * Returns 0 on success, -1 on failure. - */ -int tis_open(void); - -/* - * tis_close() - * - * terminate the currect session with the TPM by releasing the locked - * locality. Returns 0 on success of -1 on failure (in case lock - * removal did not succeed). - */ -int tis_close(void); - -/* - * tis_sendrecv() - * - * Send the requested data to the TPM and then try to get its response - * - * @sendbuf - buffer of the data to send - * @send_size size of the data to send - * @recvbuf - memory to save the response to - * @recv_len - pointer to the size of the response buffer - * - * Returns 0 on success (and places the number of response bytes at recv_len) - * or -1 on failure. - */ -int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, uint8_t *recvbuf, - size_t *recv_len); - -#endif /* __DRIVERS_TPM_TPM_H__ */ diff --git a/src/drivers/i2c/tpm/tis_i2c.c b/src/drivers/i2c/tpm/tis_i2c.c deleted file mode 100644 index 59971a2..0000000 --- a/src/drivers/i2c/tpm/tis_i2c.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright 2013 Google Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/i2c.h> -#include "tis.h" -#include "tpm.h" - -static unsigned bus = 0; - -static int opened; - -void tis_set_i2c_bus(unsigned _bus) -{ - bus = _bus; -} - -int tis_open(void) -{ - opened = 1; - if (tpm_open(bus, CONFIG_DRIVER_TPM_I2C_ADDR)) { - opened = 0; - return -1; - } - return 0; -} - -int tis_close(void) -{ - opened = 0; - tpm_close(); - return 0; -} - -int tis_init(void) -{ - int chip = CONFIG_DRIVER_TPM_I2C_ADDR; - - /* - * Probe TPM twice; the first probing might fail because TPM is asleep, - * and the probing can wake up TPM. - */ - uint8_t tmp; - if (!bus) - return -1; - - if (i2c_read(bus, chip, 0, 0, &tmp, sizeof(tmp)) && - i2c_read(bus, chip, 0, 0, &tmp, sizeof(tmp))) - return -1; - - return 0; -} - -int tis_sendrecv(const uint8_t *sendbuf, size_t sbuf_size, - uint8_t *recvbuf, size_t *rbuf_len) -{ - uint8_t buf[TPM_BUFSIZE]; - - if (!opened && tis_open()) - return -1; - - if (sizeof(buf) < sbuf_size) - return -1; - - memcpy(buf, sendbuf, sbuf_size); - - int len = tpm_transmit(buf, sbuf_size); - - if (len < 10) { - *rbuf_len = 0; - return -1; - } - - if (len > *rbuf_len) { - *rbuf_len = len; - return -1; - } - - memcpy(recvbuf, buf, len); - *rbuf_len = len; - - return 0; -} diff --git a/src/drivers/i2c/tpm/tpm.c b/src/drivers/i2c/tpm/tpm.c index d31cc79..837bd23 100644 --- a/src/drivers/i2c/tpm/tpm.c +++ b/src/drivers/i2c/tpm/tpm.c @@ -8,6 +8,10 @@ * Device driver for TCG/TCPA TPM (trusted platform module). * Specifications at www.trustedcomputinggroup.org * + * This device driver implements the TPM interface as defined in + * the TCG TPM Interface Spec version 1.2, revision 1.0 and the + * Infineon I2C Protocol Stack Specification v0.20. + * * It is based on the Linux kernel driver tpm.c from Leendert van * Dorn, Dave Safford, Reiner Sailer, and Kyleen Hall. * @@ -34,113 +38,524 @@
#include <stdint.h> #include <string.h> -#include <assert.h> +#include <types.h> #include <delay.h> #include <console/console.h> #include <arch/byteorder.h> -#include "tis.h" +#include <device/i2c.h> #include "tpm.h"
-/* global structure for tpm chip data */ -struct tpm_chip g_chip; +/* max. buffer size supported by our TPM */ +#ifdef TPM_BUFSIZE +#undef TPM_BUFSIZE +#endif +#define TPM_BUFSIZE 1260 + +/* Address of the TPM on the I2C bus */ +#define TPM_I2C_ADDR 0x20 + +/* max. number of iterations after I2C NAK */ +#define MAX_COUNT 3 + +#define SLEEP_DURATION 60 /* in usec */ + +/* max. number of iterations after I2C NAK for 'long' commands + * we need this especially for sending TPM_READY, since the cleanup after the + * transtion to the ready state may take some time, but it is unpredictable + * how long it will take. + */ +#define MAX_COUNT_LONG 50 + +#define SLEEP_DURATION_LONG 210 /* in usec */ + +/* expected value for DIDVID register */ +#define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L +#define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L + +enum i2c_chip_type { + SLB9635, + SLB9645, + UNKNOWN, +}; + +static const char * const chip_name[] = { + [SLB9635] = "slb9635tt", + [SLB9645] = "slb9645tt", + [UNKNOWN] = "unknown/fallback to slb9635", +};
-#define TPM_CMD_COUNT_BYTE 2 -#define TPM_CMD_ORDINAL_BYTE 6 +/* Structure to store I2C TPM specific stuff */ +struct tpm_inf_dev { + unsigned bus; + unsigned int addr; + uint8_t buf[TPM_BUFSIZE + sizeof(uint8_t)]; // max. buffer size + addr + enum i2c_chip_type chip_type; +};
-ssize_t tpm_transmit(const uint8_t *buf, size_t bufsiz) +static struct tpm_inf_dev tpm_dev = { + .addr = TPM_I2C_ADDR +}; + +/* + * iic_tpm_read() - read from TPM register + * @addr: register address to read from + * @buffer: provided by caller + * @len: number of bytes to read + * + * Read len bytes from TPM register and put them into + * buffer (little-endian format, i.e. first byte is put into buffer[0]). + * + * NOTE: TPM is big-endian for multi-byte values. Multi-byte + * values have to be swapped. + * + * Return -1 on error, 0 on success. + */ +static int iic_tpm_read(uint8_t addr, uint8_t *buffer, size_t len) { - ssize_t rc; - uint32_t count, ordinal; + int rc; + int count; + + if (!tpm_dev.bus) + return -1; + if ((tpm_dev.chip_type == SLB9635) || (tpm_dev.chip_type == UNKNOWN)) { + /* slb9635 protocol should work in both cases */ + for (count = 0; count < MAX_COUNT; count++) { + rc = i2c_write(tpm_dev.bus, tpm_dev.addr, + 0, 0, &addr, 1); + if (rc == 0) + break; /* success, break to skip sleep */ + + udelay(SLEEP_DURATION); + }
- struct tpm_chip *chip = &g_chip; + if (rc) + return -1;
- memcpy(&count, buf + TPM_CMD_COUNT_BYTE, sizeof(count)); - count = be32_to_cpu(count); - memcpy(&ordinal, buf + TPM_CMD_ORDINAL_BYTE, sizeof(ordinal)); - ordinal = be32_to_cpu(ordinal); + /* After the TPM has successfully received the register address + * it needs some time, thus we're sleeping here again, before + * retrieving the data + */ + for (count = 0; count < MAX_COUNT; count++) { + udelay(SLEEP_DURATION); + rc = i2c_read(tpm_dev.bus, tpm_dev.addr, + 0, 0, buffer, len); + if (rc == 0) + break; /* success, break to skip sleep */
- if (count == 0) { - printk(BIOS_DEBUG, "tpm_transmit: no data\n"); - return -1; //ENODATA; + } + } else { + /* use a combined read for newer chips + * unfortunately the smbus functions are not suitable due to + * the 32 byte limit of the smbus. + * retries should usually not be needed, but are kept just to + * be safe on the safe side. + */ + for (count = 0; count < MAX_COUNT; count++) { + rc = i2c_read(tpm_dev.bus, tpm_dev.addr, + addr, 1, buffer, len); + if (rc == 0) + break; /* break here to skip sleep */ + udelay(SLEEP_DURATION); + } } - if (count > bufsiz) { - printk(BIOS_DEBUG, "tpm_transmit: invalid count value %x %zx\n", - count, bufsiz); - return -1; //E2BIG; + + /* take care of 'guard time' */ + udelay(SLEEP_DURATION); + if (rc) + return -1; + + return 0; +} + +static int iic_tpm_write_generic(uint8_t addr, uint8_t *buffer, size_t len, + unsigned int sleep_time, + uint8_t max_count) +{ + int rc = 0; + int count; + + if (len > TPM_BUFSIZE) { + printk(BIOS_DEBUG, "%s: Length %d is too large\n", __func__, len); + return -1; }
- ASSERT(chip->vendor.send); - rc = chip->vendor.send(chip, (uint8_t *) buf, count); - if (rc < 0) { - printk(BIOS_DEBUG, "tpm_transmit: tpm_send: error %zd\n", rc); - goto out; + /* prepare send buffer */ + tpm_dev.buf[0] = addr; + memcpy(&(tpm_dev.buf[1]), buffer, len); + + if (!tpm_dev.bus) + return -1; + for (count = 0; count < max_count; count++) { + rc = i2c_write(tpm_dev.bus, tpm_dev.addr, 0, 0, + tpm_dev.buf, len + 1); + if (rc == 0) + break; /* success, break to skip sleep */ + + udelay(sleep_time); }
- if (chip->vendor.irq) - goto out_recv; + /* take care of 'guard time' */ + udelay(SLEEP_DURATION); + if (rc) + return -1;
- int timeout = 2 * 60 * 1000; /* two minutes timeout */ + return 0; +} + +/* + * iic_tpm_write() - write to TPM register + * @addr: register address to write to + * @buffer: containing data to be written + * @len: number of bytes to write + * + * Write len bytes from provided buffer to TPM register (little + * endian format, i.e. buffer[0] is written as first byte). + * + * NOTE: TPM is big-endian for multi-byte values. Multi-byte + * values have to be swapped. + * + * NOTE: use this function instead of the iic_tpm_write_generic function. + * + * Return -EIO on error, 0 on success + */ +static int iic_tpm_write(uint8_t addr, uint8_t *buffer, size_t len) +{ + return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION, + MAX_COUNT); +} + +/* + * This function is needed especially for the cleanup situation after + * sending TPM_READY + * */ +static int iic_tpm_write_long(uint8_t addr, uint8_t *buffer, size_t len) +{ + return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LONG, + MAX_COUNT_LONG); +} + +#define TPM_HEADER_SIZE 10 + +enum tis_access { + TPM_ACCESS_VALID = 0x80, + TPM_ACCESS_ACTIVE_LOCALITY = 0x20, + TPM_ACCESS_REQUEST_PENDING = 0x04, + TPM_ACCESS_REQUEST_USE = 0x02, +}; + +enum tis_status { + TPM_STS_VALID = 0x80, + TPM_STS_COMMAND_READY = 0x40, + TPM_STS_GO = 0x20, + TPM_STS_DATA_AVAIL = 0x10, + TPM_STS_DATA_EXPECT = 0x08, +}; + +#define TPM_ACCESS(l) (0x0000 | ((l) << 4)) +#define TPM_STS(l) (0x0001 | ((l) << 4)) +#define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4)) +#define TPM_DID_VID(l) (0x0006 | ((l) << 4)) + +static int check_locality(struct tpm_chip *chip, int loc) +{ + uint8_t buf; + + if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0) + return -1; + + if ((buf & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) { + chip->vendor.locality = loc; + return loc; + } + + return -1; +} + +static void release_locality(struct tpm_chip *chip, int loc, int force) +{ + uint8_t buf; + if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0) + return; + + if (force || (buf & (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) == + (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) { + buf = TPM_ACCESS_ACTIVE_LOCALITY; + iic_tpm_write(TPM_ACCESS(loc), &buf, 1); + } +} + +static int request_locality(struct tpm_chip *chip, int loc) +{ + uint8_t buf = TPM_ACCESS_REQUEST_USE; + + if (check_locality(chip, loc) >= 0) + return loc; /* we already have the locality */ + + iic_tpm_write(TPM_ACCESS(loc), &buf, 1); + + /* wait for burstcount */ + int timeout = 2 * 1000; /* 2s timeout */ while (timeout) { - ASSERT(chip->vendor.status); - uint8_t status = chip->vendor.status(chip); - if ((status & chip->vendor.req_complete_mask) == - chip->vendor.req_complete_val) { - goto out_recv; - } + if (check_locality(chip, loc) >= 0) + return loc; + mdelay(TPM_TIMEOUT); + timeout--; + }
- if ((status == chip->vendor.req_canceled)) { - printk(BIOS_DEBUG, "tpm_transmit: Operation Canceled\n"); - rc = -1; - goto out; - } + return -1; +} + +static uint8_t tpm_tis_i2c_status(struct tpm_chip *chip) +{ + /* NOTE: Since I2C read may fail, return 0 in this case --> time-out */ + uint8_t buf; + if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0) + return 0; + else + return buf; +} + +static void tpm_tis_i2c_ready(struct tpm_chip *chip) +{ + /* this causes the current command to be aborted */ + uint8_t buf = TPM_STS_COMMAND_READY; + iic_tpm_write_long(TPM_STS(chip->vendor.locality), &buf, 1); +} + +static ssize_t get_burstcount(struct tpm_chip *chip) +{ + ssize_t burstcnt; + uint8_t buf[3]; + + /* wait for burstcount */ + int timeout = 2 * 1000; /* 2s timeout */ + while (timeout) { + /* Note: STS is little endian */ + if (iic_tpm_read(TPM_STS(chip->vendor.locality) + 1, buf, 3) < 0) + burstcnt = 0; + else + burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0]; + + if (burstcnt) + return burstcnt; mdelay(TPM_TIMEOUT); timeout--; } + return -1; +} + +static int wait_for_stat(struct tpm_chip *chip, uint8_t mask, int *status) +{ + unsigned long timeout = 2 * 1024; + while (timeout) { + *status = tpm_tis_i2c_status(chip); + if ((*status & mask) == mask) + return 0; + mdelay(TPM_TIMEOUT); + timeout--; + } + + return -1; +} + +static int recv_data(struct tpm_chip *chip, uint8_t *buf, size_t count) +{ + size_t size = 0; + + while (size < count) { + ssize_t burstcnt = get_burstcount(chip); + int rc; + + /* burstcount < 0 = TPM is busy */ + if (burstcnt < 0) + return burstcnt; + + /* limit received data to max. left */ + if (burstcnt > (count - size)) + burstcnt = count - size; + + rc = iic_tpm_read(TPM_DATA_FIFO(chip->vendor.locality), + &(buf[size]), + burstcnt); + if (rc == 0) + size += burstcnt; + + } + return size; +}
- ASSERT(chip->vendor.cancel); - chip->vendor.cancel(chip); - printk(BIOS_DEBUG, "tpm_transmit: Operation Timed out\n"); - rc = -1; //ETIME; - goto out; +static int tpm_tis_i2c_recv(struct tpm_chip *chip, uint8_t *buf, size_t count) +{ + int size = 0; + uint32_t expected; + int status;
-out_recv: + if (count < TPM_HEADER_SIZE) { + size = -1; + goto out; + } + + /* read first 10 bytes, including tag, paramsize, and result */ + size = recv_data(chip, buf, TPM_HEADER_SIZE); + if (size < TPM_HEADER_SIZE) { + printk(BIOS_DEBUG, "tpm_tis_i2c_recv: Unable to read header\n"); + goto out; + } + + memcpy(&expected, buf + TPM_RSP_SIZE_BYTE, sizeof(expected)); + expected = be32_to_cpu(expected); + if ((size_t)expected > count) { + size = -1; + goto out; + } + + size += recv_data(chip, &buf[TPM_HEADER_SIZE], + expected - TPM_HEADER_SIZE); + if (size < expected) { + printk(BIOS_DEBUG, "tpm_tis_i2c_recv: Unable to " + "read remainder of result\n"); + size = -1; + goto out; + } + + wait_for_stat(chip, TPM_STS_VALID, &status); + if (status & TPM_STS_DATA_AVAIL) { /* retry? */ + printk(BIOS_DEBUG, "tpm_tis_i2c_recv: Error left over data\n"); + size = -1; + goto out; + }
- rc = chip->vendor.recv(chip, (uint8_t *) buf, TPM_BUFSIZE); - if (rc < 0) - printk(BIOS_DEBUG, "tpm_transmit: tpm_recv: error %zd\n", rc); out: - return rc; + tpm_tis_i2c_ready(chip); + + return size; }
-#define TPM_ERROR_SIZE 10 +static int tpm_tis_i2c_send(struct tpm_chip *chip, uint8_t *buf, size_t len) +{ + int status; + size_t count = 0; + uint8_t sts = TPM_STS_GO; + + if (len > TPM_BUFSIZE) + return -1; /* command is too long for our TPM, sorry */ + + status = tpm_tis_i2c_status(chip); + if ((status & TPM_STS_COMMAND_READY) == 0) { + tpm_tis_i2c_ready(chip); + if (wait_for_stat(chip, TPM_STS_COMMAND_READY, &status) < 0) + goto out_err; + } + + while (count < len - 1) { + ssize_t burstcnt = get_burstcount(chip); + + /* burstcount < 0 = TPM is busy */ + if (burstcnt < 0) + return burstcnt; + + if (burstcnt > (len-1-count)) + burstcnt = len-1-count; + +#ifdef CONFIG_TPM_I2C_BURST_LIMITATION + if (burstcnt > CONFIG_TPM_I2C_BURST_LIMITATION) + burstcnt = CONFIG_TPM_I2C_BURST_LIMITATION; +#endif /* CONFIG_TPM_I2C_BURST_LIMITATION */ + + if (iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), + &(buf[count]), burstcnt) == 0) + count += burstcnt; + + wait_for_stat(chip, TPM_STS_VALID, &status); + if ((status & TPM_STS_DATA_EXPECT) == 0) + goto out_err; + } + + /* write last byte */ + iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), &(buf[count]), 1); + + wait_for_stat(chip, TPM_STS_VALID, &status); + if ((status & TPM_STS_DATA_EXPECT) != 0) + goto out_err; + + /* go and do it */ + iic_tpm_write(TPM_STS(chip->vendor.locality), &sts, 1); + + return len;
-struct tpm_chip *tpm_register_hardware(const struct tpm_vendor_specific *entry) +out_err: + tpm_tis_i2c_ready(chip); + + return -1; +} + +static struct tpm_vendor_specific tpm_tis_i2c = { + .status = tpm_tis_i2c_status, + .recv = tpm_tis_i2c_recv, + .send = tpm_tis_i2c_send, + .cancel = tpm_tis_i2c_ready, + .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, + .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, + .req_canceled = TPM_STS_COMMAND_READY, +}; + +/* Initialization of I2C TPM */ + +int tpm_vendor_init(unsigned bus, uint32_t dev_addr) { + uint32_t vendor; + unsigned int old_addr; struct tpm_chip *chip; + extern struct tpm_chip g_chip; + + old_addr = tpm_dev.addr; + if (dev_addr != 0) + tpm_dev.addr = dev_addr; + tpm_dev.bus = bus;
- /* Driver specific per-device data */ chip = &g_chip; - memcpy(&chip->vendor, entry, sizeof(struct tpm_vendor_specific)); + memcpy(&chip->vendor, &tpm_tis_i2c, sizeof(struct tpm_vendor_specific)); chip->is_open = 1;
- return chip; -} + /* Disable interrupts (not supported) */ + chip->vendor.irq = 0;
-int tpm_open(unsigned bus, uint32_t dev_addr) -{ - int rc; - if (g_chip.is_open) - return -1; //EBUSY; - rc = tpm_vendor_init(bus, dev_addr); - if (rc < 0) - g_chip.is_open = 0; - return rc; + if (request_locality(chip, 0) != 0) + goto out_err; + + /* Read four bytes from DID_VID register */ + if (iic_tpm_read(TPM_DID_VID(0), (uint8_t *)&vendor, 4) < 0) + goto out_release; + + if (vendor == TPM_TIS_I2C_DID_VID_9645) { + tpm_dev.chip_type = SLB9645; + } else if (be32_to_cpu(vendor) == TPM_TIS_I2C_DID_VID_9635) { + tpm_dev.chip_type = SLB9635; + } else { + printk(BIOS_DEBUG, "Vendor ID 0x%08x not recognized.\n", vendor); + goto out_release; + } + + printk(BIOS_DEBUG, "1.2 TPM (chip type %s device-id 0x%X)\n", + chip_name[tpm_dev.chip_type], vendor >> 16); + + /* + * A timeout query to TPM can be placed here. + * Standard timeout values are used so far + */ + + return 0; + +out_release: + release_locality(chip, 0, 1); + +out_err: + tpm_dev.addr = old_addr; + return -1; }
-void tpm_close(void) +void tpm_vendor_cleanup(struct tpm_chip *chip) { - if (g_chip.is_open) { - tpm_vendor_cleanup(&g_chip); - g_chip.is_open = 0; - } + release_locality(chip, chip->vendor.locality, 1); } diff --git a/src/drivers/i2c/tpm/tpm.h b/src/drivers/i2c/tpm/tpm.h index daddc59..6d195a1 100644 --- a/src/drivers/i2c/tpm/tpm.h +++ b/src/drivers/i2c/tpm/tpm.h @@ -128,29 +128,10 @@ struct tpm_cmd_t { tpm_cmd_params params; } __attribute__ ((packed));
- /* ---------- Interface for TPM vendor ------------ */
-struct tpm_chip *tpm_register_hardware(const struct tpm_vendor_specific *); - int tpm_vendor_init(unsigned bus, uint32_t dev_addr);
void tpm_vendor_cleanup(struct tpm_chip *chip);
-/* ---------- Interface for TDDL ------------------- */ - -/* - * if dev_addr != 0 - redefines TPM device address - * Returns < 0 on error, 0 on success. - */ -int tpm_open(unsigned bus, uint32_t dev_addr); - -void tpm_close(void); - -/* - * Transmit bufsiz bytes out of buf to TPM and get results back in buf, too. - * Returns < 0 on error, 0 on success. - */ -ssize_t tpm_transmit(const unsigned char *buf, size_t bufsiz); - #endif /* __DRIVERS_TPM_SLB9635_I2C_TPM_H__ */ diff --git a/src/drivers/i2c/tpm/tpm_tis_i2c.c b/src/drivers/i2c/tpm/tpm_tis_i2c.c deleted file mode 100644 index 008fac6..0000000 --- a/src/drivers/i2c/tpm/tpm_tis_i2c.c +++ /dev/null @@ -1,578 +0,0 @@ -/* - * Copyright (C) 2011 Infineon Technologies - * - * Authors: - * Peter Huewe huewe.external@infineon.com - * - * Description: - * Device driver for TCG/TCPA TPM (trusted platform module). - * Specifications at www.trustedcomputinggroup.org - * - * This device driver implements the TPM interface as defined in - * the TCG TPM Interface Spec version 1.2, revision 1.0 and the - * Infineon I2C Protocol Stack Specification v0.20. - * - * It is based on the Linux kernel driver tpm.c from Leendert van - * Dorn, Dave Safford, Reiner Sailer, and Kyleen Hall. - * - * Version: 2.1.1 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2 of the - * License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <stdint.h> -#include <string.h> -#include <types.h> -#include <delay.h> -#include <console/console.h> -#include <arch/byteorder.h> -#include <device/i2c.h> -#include "tpm.h" - -/* max. buffer size supported by our tpm */ -#ifdef TPM_BUFSIZE -#undef TPM_BUFSIZE -#endif -#define TPM_BUFSIZE 1260 -/* Address of the TPM on the I2C bus */ -#define TPM_I2C_ADDR 0x20 -/* max. number of iterations after i2c NAK */ -#define MAX_COUNT 3 - -#define SLEEP_DURATION 60 /*in usec*/ - -/* max. number of iterations after i2c NAK for 'long' commands - * we need this especially for sending TPM_READY, since the cleanup after the - * transtion to the ready state may take some time, but it is unpredictable - * how long it will take. - */ -#define MAX_COUNT_LONG 50 - -#define SLEEP_DURATION_LONG 210 /* in usec */ - -/* expected value for DIDVID register */ -#define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L -#define TPM_TIS_I2C_DID_VID_9645 0x001a15d1L - -enum i2c_chip_type { - SLB9635, - SLB9645, - UNKNOWN, -}; - -static const char * const chip_name[] = { - [SLB9635] = "slb9635tt", - [SLB9645] = "slb9645tt", - [UNKNOWN] = "unknown/fallback to slb9635", -}; - -/* Structure to store I2C TPM specific stuff */ -struct tpm_inf_dev { - unsigned bus; - unsigned int addr; - uint8_t buf[TPM_BUFSIZE + sizeof(uint8_t)]; // max. buffer size + addr - enum i2c_chip_type chip_type; -}; - -static struct tpm_inf_dev tpm_dev = { - .addr = TPM_I2C_ADDR -}; - -/* - * iic_tpm_read() - read from TPM register - * @addr: register address to read from - * @buffer: provided by caller - * @len: number of bytes to read - * - * Read len bytes from TPM register and put them into - * buffer (little-endian format, i.e. first byte is put into buffer[0]). - * - * NOTE: TPM is big-endian for multi-byte values. Multi-byte - * values have to be swapped. - * - * Return -EIO on error, 0 on success. - */ -static int iic_tpm_read(uint8_t addr, uint8_t *buffer, size_t len) -{ - int rc; - int count; - - if (!tpm_dev.bus) - return -1; - if ((tpm_dev.chip_type == SLB9635) || (tpm_dev.chip_type == UNKNOWN)) { - /* slb9635 protocol should work in both cases */ - for (count = 0; count < MAX_COUNT; count++) { - rc = i2c_write(tpm_dev.bus, tpm_dev.addr, - 0, 0, &addr, 1); - if (rc == 0) - break; /* success, break to skip sleep */ - - udelay(SLEEP_DURATION); - } - - if (rc) - return -rc; - - /* After the TPM has successfully received the register address - * it needs some time, thus we're sleeping here again, before - * retrieving the data - */ - for (count = 0; count < MAX_COUNT; count++) { - udelay(SLEEP_DURATION); - rc = i2c_read(tpm_dev.bus, tpm_dev.addr, - 0, 0, buffer, len); - if (rc == 0) - break; /* success, break to skip sleep */ - - } - } else { - /* use a combined read for newer chips - * unfortunately the smbus functions are not suitable due to - * the 32 byte limit of the smbus. - * retries should usually not be needed, but are kept just to - * be safe on the safe side. - */ - for (count = 0; count < MAX_COUNT; count++) { - rc = i2c_read(tpm_dev.bus, tpm_dev.addr, - addr, 1, buffer, len); - if (rc == 0) - break; /* break here to skip sleep */ - udelay(SLEEP_DURATION); - } - } - - /* take care of 'guard time' */ - udelay(SLEEP_DURATION); - if (rc) - return -rc; - - return 0; -} - -static int iic_tpm_write_generic(uint8_t addr, uint8_t *buffer, size_t len, - unsigned int sleep_time, - uint8_t max_count) -{ - int rc = 0; - int count; - - if (len > TPM_BUFSIZE) { - printk(BIOS_DEBUG, "%s: Length %d is too large\n", __func__, len); - return -1; - } - - /* prepare send buffer */ - tpm_dev.buf[0] = addr; - memcpy(&(tpm_dev.buf[1]), buffer, len); - - if (!tpm_dev.bus) - return -1; - for (count = 0; count < max_count; count++) { - rc = i2c_write(tpm_dev.bus, tpm_dev.addr, 0, 0, - tpm_dev.buf, len + 1); - if (rc == 0) - break; /* success, break to skip sleep */ - - udelay(sleep_time); - } - - /* take care of 'guard time' */ - udelay(SLEEP_DURATION); - if (rc) - return -rc; - - return 0; -} - -/* - * iic_tpm_write() - write to TPM register - * @addr: register address to write to - * @buffer: containing data to be written - * @len: number of bytes to write - * - * Write len bytes from provided buffer to TPM register (little - * endian format, i.e. buffer[0] is written as first byte). - * - * NOTE: TPM is big-endian for multi-byte values. Multi-byte - * values have to be swapped. - * - * NOTE: use this function instead of the iic_tpm_write_generic function. - * - * Return -EIO on error, 0 on success - */ -static int iic_tpm_write(uint8_t addr, uint8_t *buffer, size_t len) -{ - return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION, - MAX_COUNT); -} - -/* - * This function is needed especially for the cleanup situation after - * sending TPM_READY - * */ -static int iic_tpm_write_long(uint8_t addr, uint8_t *buffer, size_t len) -{ - return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LONG, - MAX_COUNT_LONG); -} - -#define TPM_HEADER_SIZE 10 - -enum tis_access { - TPM_ACCESS_VALID = 0x80, - TPM_ACCESS_ACTIVE_LOCALITY = 0x20, - TPM_ACCESS_REQUEST_PENDING = 0x04, - TPM_ACCESS_REQUEST_USE = 0x02, -}; - -enum tis_status { - TPM_STS_VALID = 0x80, - TPM_STS_COMMAND_READY = 0x40, - TPM_STS_GO = 0x20, - TPM_STS_DATA_AVAIL = 0x10, - TPM_STS_DATA_EXPECT = 0x08, -}; - -#define TPM_ACCESS(l) (0x0000 | ((l) << 4)) -#define TPM_STS(l) (0x0001 | ((l) << 4)) -#define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4)) -#define TPM_DID_VID(l) (0x0006 | ((l) << 4)) - -static int check_locality(struct tpm_chip *chip, int loc) -{ - uint8_t buf; - int rc; - - rc = iic_tpm_read(TPM_ACCESS(loc), &buf, 1); - if (rc < 0) - return rc; - - if ((buf & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == - (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) { - chip->vendor.locality = loc; - return loc; - } - - return -1; -} - -static void release_locality(struct tpm_chip *chip, int loc, int force) -{ - uint8_t buf; - if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0) - return; - - if (force || (buf & (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) == - (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) { - buf = TPM_ACCESS_ACTIVE_LOCALITY; - iic_tpm_write(TPM_ACCESS(loc), &buf, 1); - } -} - -static int request_locality(struct tpm_chip *chip, int loc) -{ - uint8_t buf = TPM_ACCESS_REQUEST_USE; - - if (check_locality(chip, loc) >= 0) - return loc; /* we already have the locality */ - - iic_tpm_write(TPM_ACCESS(loc), &buf, 1); - - /* wait for burstcount */ - int timeout = 2 * 1000; /* 2s timeout */ - while (timeout) { - if (check_locality(chip, loc) >= 0) - return loc; - mdelay(TPM_TIMEOUT); - timeout--; - } - - return -1; -} - -static uint8_t tpm_tis_i2c_status(struct tpm_chip *chip) -{ - /* NOTE: since i2c read may fail, return 0 in this case --> time-out */ - uint8_t buf; - if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0) - return 0; - else - return buf; -} - -static void tpm_tis_i2c_ready(struct tpm_chip *chip) -{ - /* this causes the current command to be aborted */ - uint8_t buf = TPM_STS_COMMAND_READY; - iic_tpm_write_long(TPM_STS(chip->vendor.locality), &buf, 1); -} - -static ssize_t get_burstcount(struct tpm_chip *chip) -{ - ssize_t burstcnt; - uint8_t buf[3]; - - /* wait for burstcount */ - int timeout = 2 * 1000; /* 2s timeout */ - while (timeout) { - /* Note: STS is little endian */ - if (iic_tpm_read(TPM_STS(chip->vendor.locality) + 1, buf, 3) < 0) - burstcnt = 0; - else - burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0]; - - if (burstcnt) - return burstcnt; - mdelay(TPM_TIMEOUT); - timeout--; - } - return -1; //EBUSY; -} - -static int wait_for_stat(struct tpm_chip *chip, uint8_t mask, int *status) -{ - unsigned long timeout = 2 * 1024; - while (timeout) { - *status = tpm_tis_i2c_status(chip); - if ((*status & mask) == mask) - return 0; - mdelay(TPM_TIMEOUT); - timeout--; - } - - return -1; //ETIME; -} - -static int recv_data(struct tpm_chip *chip, uint8_t *buf, size_t count) -{ - size_t size = 0; - ssize_t burstcnt; - int rc; - - while (size < count) { - burstcnt = get_burstcount(chip); - - /* burstcount < 0 = tpm is busy */ - if (burstcnt < 0) - return burstcnt; - - /* limit received data to max. left */ - if (burstcnt > (count - size)) - burstcnt = count - size; - - rc = iic_tpm_read(TPM_DATA_FIFO(chip->vendor.locality), - &(buf[size]), - burstcnt); - if (rc == 0) - size += burstcnt; - - } - return size; -} - -static int tpm_tis_i2c_recv(struct tpm_chip *chip, uint8_t *buf, size_t count) -{ - int size = 0; - uint32_t expected; - int status; - - if (count < TPM_HEADER_SIZE) { - size = -1; //EIO; - goto out; - } - - /* read first 10 bytes, including tag, paramsize, and result */ - size = recv_data(chip, buf, TPM_HEADER_SIZE); - if (size < TPM_HEADER_SIZE) { - printk(BIOS_DEBUG, "tpm_tis_i2c_recv: Unable to read header\n"); - goto out; - } - - memcpy(&expected, buf + TPM_RSP_SIZE_BYTE, sizeof(expected)); - expected = be32_to_cpu(expected); - if ((size_t)expected > count) { - size = -1; //EIO; - goto out; - } - - size += recv_data(chip, &buf[TPM_HEADER_SIZE], - expected - TPM_HEADER_SIZE); - if (size < expected) { - printk(BIOS_DEBUG, "tpm_tis_i2c_recv: Unable to " - "read remainder of result\n"); - size = -1; //ETIME; - goto out; - } - - wait_for_stat(chip, TPM_STS_VALID, &status); - if (status & TPM_STS_DATA_AVAIL) { /* retry? */ - printk(BIOS_DEBUG, "tpm_tis_i2c_recv: Error left over data\n"); - size = -1; //EIO; - goto out; - } - -out: - tpm_tis_i2c_ready(chip); - - return size; -} - -static int tpm_tis_i2c_send(struct tpm_chip *chip, uint8_t *buf, size_t len) -{ - int rc, status; - ssize_t burstcnt; - size_t count = 0; - uint8_t sts = TPM_STS_GO; - - if (len > TPM_BUFSIZE) - return -1; //E2BIG; /* command is too long for our tpm, sorry */ - - status = tpm_tis_i2c_status(chip); - if ((status & TPM_STS_COMMAND_READY) == 0) { - tpm_tis_i2c_ready(chip); - if (wait_for_stat(chip, TPM_STS_COMMAND_READY, &status) < 0) { - rc = -1; //ETIME; - goto out_err; - } - } - - while (count < len - 1) { - burstcnt = get_burstcount(chip); - - /* burstcount < 0 = tpm is busy */ - if (burstcnt < 0) - return burstcnt; - - if (burstcnt > (len-1-count)) - burstcnt = len-1-count; - -#ifdef CONFIG_TPM_I2C_BURST_LIMITATION - if (burstcnt > CONFIG_TPM_I2C_BURST_LIMITATION) - burstcnt = CONFIG_TPM_I2C_BURST_LIMITATION; -#endif /* CONFIG_TPM_I2C_BURST_LIMITATION */ - - rc = iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), - &(buf[count]), burstcnt); - if (rc == 0) - count += burstcnt; - - wait_for_stat(chip, TPM_STS_VALID, &status); - - if ((status & TPM_STS_DATA_EXPECT) == 0) { - rc = -1; //EIO; - goto out_err; - } - - } - - /* write last byte */ - iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), &(buf[count]), 1); - wait_for_stat(chip, TPM_STS_VALID, &status); - if ((status & TPM_STS_DATA_EXPECT) != 0) { - rc = -1; //EIO; - goto out_err; - } - - /* go and do it */ - iic_tpm_write(TPM_STS(chip->vendor.locality), &sts, 1); - - return len; -out_err: - tpm_tis_i2c_ready(chip); - - return rc; -} - -static struct tpm_vendor_specific tpm_tis_i2c = { - .status = tpm_tis_i2c_status, - .recv = tpm_tis_i2c_recv, - .send = tpm_tis_i2c_send, - .cancel = tpm_tis_i2c_ready, - .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, - .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, - .req_canceled = TPM_STS_COMMAND_READY, -}; - -/* initialisation of i2c tpm */ - - -int tpm_vendor_init(unsigned bus, uint32_t dev_addr) -{ - uint32_t vendor; - unsigned int old_addr; - int rc = 0; - struct tpm_chip *chip; - - old_addr = tpm_dev.addr; - if (dev_addr != 0) - tpm_dev.addr = dev_addr; - tpm_dev.bus = bus; - - chip = tpm_register_hardware(&tpm_tis_i2c); - if (chip < 0) { - rc = -1; //ENODEV; - goto out_err; - } - - /* Disable interrupts (not supported) */ - chip->vendor.irq = 0; - - if (request_locality(chip, 0) != 0) { - rc = -1; //ENODEV; - goto out_err; - } - - /* read four bytes from DID_VID register */ - if (iic_tpm_read(TPM_DID_VID(0), (uint8_t *)&vendor, 4) < 0) { - rc = -1; //EIO; - goto out_release; - } - - if (vendor == TPM_TIS_I2C_DID_VID_9645) { - tpm_dev.chip_type = SLB9645; - } else if (be32_to_cpu(vendor) == TPM_TIS_I2C_DID_VID_9635) { - tpm_dev.chip_type = SLB9635; - } else { - printk(BIOS_DEBUG, "Vendor ID 0x%08x not recognized.\n", vendor); - rc = -1; //ENODEV; - goto out_release; - } - - printk(BIOS_DEBUG, "1.2 TPM (chip type %s device-id 0x%X)\n", - chip_name[tpm_dev.chip_type], vendor >> 16); - - /* - * A timeout query to TPM can be placed here. - * Standard timeout values are used so far - */ - - return 0; - -out_release: - release_locality(chip, 0, 1); - -out_err: - tpm_dev.addr = old_addr; - return rc; -} - -void tpm_vendor_cleanup(struct tpm_chip *chip) -{ - release_locality(chip, chip->vendor.locality, 1); -} diff --git a/src/drivers/pc80/tpm.c b/src/drivers/pc80/tpm.c index 40f1e7b..c0429dd 100644 --- a/src/drivers/pc80/tpm.c +++ b/src/drivers/pc80/tpm.c @@ -33,7 +33,7 @@ #include <arch/io.h> #include <arch/byteorder.h> #include <console/console.h> -#include <pc80/tpm.h> +#include <tpm.h> #include <arch/early_variables.h>
#define PREFIX "lpc_tpm: " diff --git a/src/include/pc80/tpm.h b/src/include/pc80/tpm.h deleted file mode 100644 index 2eff15a..0000000 --- a/src/include/pc80/tpm.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef TPM_H_ -#define TPM_H_ - -int tis_init(void); -int tis_open(void); -int tis_close(void); -int tis_sendrecv(const u8 *sendbuf, size_t send_size, u8 *recvbuf, - size_t *recv_len); - -#endif /* TPM_H_ */ diff --git a/src/include/tpm.h b/src/include/tpm.h new file mode 100644 index 0000000..e25ad6a --- /dev/null +++ b/src/include/tpm.h @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef TPM_H_ +#define TPM_H_ + +#include <stddef.h> +#include <stdint.h> + +/* + * tis_init() + * + * Initialize the TPM device. Returns 0 on success or -1 on + * failure (in case device probing did not succeed). + */ +int tis_init(void); + +/* + * tis_open() + * + * Requests access to locality 0 for the caller. After all commands have been + * completed the caller is supposed to call tis_close(). + * + * Returns 0 on success, -1 on failure. + */ +int tis_open(void); + +/* + * tis_close() + * + * terminate the currect session with the TPM by releasing the locked + * locality. Returns 0 on success of -1 on failure (in case lock + * removal did not succeed). + */ +int tis_close(void); + +/* + * tis_sendrecv() + * + * Send the requested data to the TPM and then try to get its response + * + * @sendbuf - buffer of the data to send + * @send_size size of the data to send + * @recvbuf - memory to save the response to + * @recv_len - pointer to the size of the response buffer + * + * Returns 0 on success (and places the number of response bytes at recv_len) + * or -1 on failure. + */ +int tis_sendrecv(const u8 *sendbuf, size_t send_size, u8 *recvbuf, + size_t *recv_len); + +#endif /* TPM_H_ */ diff --git a/src/vendorcode/google/chromeos/vboot.c b/src/vendorcode/google/chromeos/vboot.c index 03d759c..e42961f 100644 --- a/src/vendorcode/google/chromeos/vboot.c +++ b/src/vendorcode/google/chromeos/vboot.c @@ -20,7 +20,7 @@ #include <types.h> #include <console/console.h> #include <arch/acpi.h> -#include <pc80/tpm.h> +#include <tpm.h> #include <reset.h> #include "chromeos.h"
diff --git a/src/vendorcode/google/chromeos/vboot_loader.c b/src/vendorcode/google/chromeos/vboot_loader.c index 943ad17..2f786ad 100644 --- a/src/vendorcode/google/chromeos/vboot_loader.c +++ b/src/vendorcode/google/chromeos/vboot_loader.c @@ -24,7 +24,7 @@ #include <cbmem.h> #include <console/console.h> #include <console/vtxprintf.h> -#include <pc80/tpm.h> +#include <tpm.h> #include <reset.h> #include <ramstage_loader.h> #include <romstage_handoff.h>