Hello build bot (Jenkins), Andrey Petrov,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/40731
to look at the new patch set (#7).
Change subject: mb/ocp/tiogapass: rework GPIOs configuration using macros ......................................................................
mb/ocp/tiogapass: rework GPIOs configuration using macros
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 registers values from the inteltool dump, is more understandable and makes the code much cleaner. The gpio.h file with PAD_CFG macros was automatically generated using the util/intelp2m [1] utility:
./intelp2m -p lbg -file tiogapass/vendorbios/inteltool_gpio.log
According to the documentation [2], the Host Software Pad Ownership register only affects the pads that are configured as input (GPI). The intelp2m utility takes this into account when converting macros and ignores bits from this register for the corresponding pads.
[1] https://review.coreboot.org/c/coreboot/+/35643 [2] Intel Document Number: 549921
Change-Id: I21e98721e58b00be9196927837daa2b5d2560822 Signed-off-by: Maxim Polyakov max.senia.poliak@gmail.com --- M src/mainboard/ocp/tiogapass/gpio.h 1 file changed, 242 insertions(+), 242 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/31/40731/7