Tim Wawrzynczak has submitted this change. ( https://review.coreboot.org/c/coreboot/+/44039 )
Change subject: mb/google/volteer: Use device aliases ......................................................................
mb/google/volteer: Use device aliases
Use the device aliases provided by tigerlake chipset.cb instead of the raw pci device+function. Take advantage of the default states in chipset.cb and only list the devices that are enabled for all volteer variants.
Change-Id: I5620004afd7fa4d50389f32dd79148960a2b2662 Signed-off-by: Duncan Laurie dlaurie@google.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/44039 Reviewed-by: Furquan Shaikh furquan@google.com Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/mainboard/google/volteer/variants/baseboard/devicetree.cb M src/mainboard/google/volteer/variants/delbin/overridetree.cb M src/mainboard/google/volteer/variants/eldrid/overridetree.cb M src/mainboard/google/volteer/variants/halvor/overridetree.cb M src/mainboard/google/volteer/variants/lindar/overridetree.cb M src/mainboard/google/volteer/variants/malefor/overridetree.cb M src/mainboard/google/volteer/variants/terrador/overridetree.cb M src/mainboard/google/volteer/variants/todor/overridetree.cb M src/mainboard/google/volteer/variants/trondo/overridetree.cb M src/mainboard/google/volteer/variants/volteer/overridetree.cb M src/mainboard/google/volteer/variants/volteer2/overridetree.cb M src/mainboard/google/volteer/variants/voxel/overridetree.cb 12 files changed, 140 insertions(+), 192 deletions(-)
Approvals: build bot (Jenkins): Verified Furquan Shaikh: Looks good to me, approved
diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb index 7790230..e428588 100644 --- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb @@ -320,10 +320,8 @@ }"
device domain 0 on - #From EDS(575683) - device pci 00.0 on end # Host Bridge 0x9A14:U/0x9A12:Y - device pci 02.0 on end # Graphics - device pci 04.0 on + device ref igpu on end + device ref dptf on # Default DPTF Policy for all Volteer boards if not overridden chip drivers/intel/dptf ## Active Policy @@ -417,90 +415,44 @@ device generic 0 on end end end # DPTF 0x9A03 - device pci 05.0 off end # IPU 0x9A19 - device pci 06.0 off end # PEG60 0x9A09 - device pci 07.0 on # TBT_PCIe0 0x9A23 + device ref tbt_pcie_rp0 on probe DB_USB USB4_GEN2 probe DB_USB USB4_GEN3 end - device pci 07.1 on # TBT_PCIe1 0x9A25 + device ref tbt_pcie_rp1 on probe DB_USB USB4_GEN2 probe DB_USB USB4_GEN3 end - device pci 07.2 off end # TBT_PCIe2 0x9A27 - device pci 07.3 off end # TBT_PCIe3 0x9A29 - device pci 08.0 on end # GNA 0x9A11 - device pci 09.0 off end # NPK 0x9A33 - device pci 0a.0 off end # Crash-log SRAM 0x9A0D - device pci 0d.0 on end # USB xHCI 0x9A13 - device pci 0d.1 off end # USB xDCI (OTG) 0x9A15 - device pci 0d.2 on # TBT DMA0 0x9A1B + device ref tbt_dma0 on probe DB_USB USB4_GEN2 probe DB_USB USB4_GEN3 end - device pci 0d.3 off end # TBT DMA1 0x9A1D - device pci 0e.0 off end # VMD 0x9A0B - - # From PCH EDS(576591) - device pci 10.2 on end # CNVi: BT 0xA0F5 - A0F7 - device pci 10.6 off end # THC0 0xA0D0 - device pci 10.7 off end # THC1 0xA0D1 - - device pci 12.0 off end # SensorHUB 0xA0FC - device pci 12.6 off end # GSPI2 0x34FB - - device pci 13.0 off end # GSPI3 0xA0FD - - device pci 14.0 on end # USB3.1 xHCI 0xA0ED - device pci 14.1 off end # USB3.1 xDCI 0xA0EE - device pci 14.2 on end # Shared RAM 0xA0EF + device ref gna on end + device ref north_xhci on end + device ref cnvi_bt on end + device ref south_xhci on end + device ref shared_ram on end chip drivers/intel/wifi register "wake" = "GPE0_PME_B0" - device pci 14.3 on end # CNVi: WiFi 0xA0F0 - A0F3 + device ref cnvi_wifi on end end - device pci 15.0 on end # I2C #0 0xA0E8 - device pci 15.1 on end # I2C1 0xA0E9 - device pci 15.2 on end # I2C2 0xA0EA - device pci 15.3 on end # I2C3 0xA0EB - - device pci 16.0 on end # HECI1 0xA0E0 - device pci 16.1 off end # HECI2 0xA0E1 - device pci 16.2 off end # CSME 0xA0E2 - device pci 16.3 off end # CSME 0xA0E3 - device pci 16.4 off end # HECI3 0xA0E4 - device pci 16.5 off end # HECI4 0xA0E5 - - device pci 17.0 on end # SATA 0xA0D3 - - device pci 19.0 on end # I2C4 0xA0C5 - device pci 19.1 on end # I2C5 0xA0C6 - device pci 19.2 off end # UART2 0xA0C7 - - device pci 1c.0 on end # RP1 0xA0B8 - device pci 1c.1 off end # RP2 0xA0B9 - device pci 1c.2 off end # RP3 0xA0BA - device pci 1c.3 off end # RP4 0xA0BB - device pci 1c.4 off end # RP5 0xA0BC - device pci 1c.5 off end # WWAN RP6 0xA0BD - device pci 1c.6 on end # RP7 0xA0BE - device pci 1c.7 on end # SD Card RP8 0xA0BF - - device pci 1d.0 on end # RP9 0xA0B0 - device pci 1d.1 off end # RP10 0xA0B1 - device pci 1d.2 on end # RP11 0xA0B2 - device pci 1d.3 off end # RP12 0xA0B3 - - device pci 1e.0 on end # UART0 0xA0A8 - device pci 1e.1 off end # UART1 0xA0A9 - device pci 1e.2 on + device ref heci1 on end + device ref sata on end + device ref pcie_rp1 on end + device ref pcie_rp7 on end + device ref pcie_rp8 on end + device ref pcie_rp9 on end + device ref pcie_rp11 on end + device ref uart0 on end + device ref gspi0 on chip drivers/spi/acpi register "hid" = "ACPI_DT_NAMESPACE_HID" register "compat_string" = ""google,cr50"" register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_C21_IRQ)" device spi 0 on end end - end # GSPI0 0xA0AA - device pci 1e.3 on + end + device ref gspi1 on chip drivers/spi/acpi register "name" = ""CRFP"" register "hid" = "ACPI_DT_NAMESPACE_HID" @@ -509,18 +461,12 @@ register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW_WAKE(GPP_C20)" device spi 0 on end end # FPMCU - end # GSPI1 0xA0AB - device pci 1f.0 on + end + device ref pch_espi on chip ec/google/chromeec device pnp 0c09.0 on end end - end # eSPI 0xA080 - A09F - device pci 1f.1 off end # P2SB 0xA0A0 - device pci 1f.2 hidden end # PMC 0xA0A1 - device pci 1f.3 on end # Intel HD audio 0xA0C8-A0CF - device pci 1f.4 off end # SMBus 0xA0A3 - device pci 1f.5 on end # SPI 0xA0A4 - device pci 1f.6 off end # GbE 0x15E1/0x15E2 - device pci 1f.7 off end # TH 0xA0A6 + end + device ref hda on end end end diff --git a/src/mainboard/google/volteer/variants/delbin/overridetree.cb b/src/mainboard/google/volteer/variants/delbin/overridetree.cb index 05c8a34..21b1f07 100644 --- a/src/mainboard/google/volteer/variants/delbin/overridetree.cb +++ b/src/mainboard/google/volteer/variants/delbin/overridetree.cb @@ -3,7 +3,7 @@ register "DdiPort2Hpd" = "0"
device domain 0 on - device pci 15.0 on + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -33,7 +33,7 @@ device i2c 32 on end end end - device pci 15.1 on + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""ELAN9008"" register "generic.desc" = ""ELAN Touchscreen"" @@ -48,8 +48,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end - end # I2C1 0xA0E9 - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -58,8 +58,8 @@ register "probed" = "1" device i2c 15 on end end - end # I2C5 0xA0C6 - device pci 1f.2 hidden + end + device ref pmc hidden # The pmc_mux chip driver is a placeholder for the # PMC.MUX device in the ACPI hierarchy. chip drivers/intel/pmc_mux @@ -80,6 +80,6 @@ end end end - end # PMC + end end end diff --git a/src/mainboard/google/volteer/variants/eldrid/overridetree.cb b/src/mainboard/google/volteer/variants/eldrid/overridetree.cb index 6e9d743..5fcd456 100644 --- a/src/mainboard/google/volteer/variants/eldrid/overridetree.cb +++ b/src/mainboard/google/volteer/variants/eldrid/overridetree.cb @@ -58,8 +58,8 @@ }"
device domain 0 on - device pci 04.0 off end - device pci 15.0 on + device ref dptf off end + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -73,7 +73,7 @@ device i2c 1a on end end end - device pci 15.1 on + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -105,8 +105,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end - end # I2C1 0xA0E9 - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -115,8 +115,8 @@ register "probed" = "1" device i2c 15 on end end - end # I2C5 0xA0C6 - device pci 1f.3 on + end + device ref hda on chip drivers/generic/max98357a register "hid" = ""MX98357A"" register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" @@ -124,7 +124,7 @@ device generic 0 on end end end - device pci 1f.2 hidden + device ref pmc hidden # The pmc_mux chip driver is a placeholder for the # PMC.MUX device in the ACPI hierarchy. chip drivers/intel/pmc_mux diff --git a/src/mainboard/google/volteer/variants/halvor/overridetree.cb b/src/mainboard/google/volteer/variants/halvor/overridetree.cb index 73767c6..f8b2921 100644 --- a/src/mainboard/google/volteer/variants/halvor/overridetree.cb +++ b/src/mainboard/google/volteer/variants/halvor/overridetree.cb @@ -8,9 +8,10 @@ register "SaGv" = "SaGv_Disabled"
device domain 0 on - device pci 07.2 on end # TBT_PCIe2 - device pci 0d.3 on end # TBT DMA1 0x9A1D - device pci 15.0 on + # Baseboard does not have these on, so they must be enabled here. + device ref tbt_pcie_rp2 on end # TBT_PCIe2 + device ref tbt_dma1 on end # TBT DMA1 0x9A1D + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -43,8 +44,8 @@ probe AUDIO MAX98373_ALC5682I_I2S_UP4 end end - end # I2C #0 0xA0E8 - device pci 15.1 on + end + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -74,8 +75,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end - end # I2C1 0xA0E9 - device pci 15.2 on + end + device ref i2c2 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" @@ -106,8 +107,8 @@ register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end end - end # I2C2 0xA0EA - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -116,7 +117,7 @@ register "probed" = "1" device i2c 15 on end end - end # I2C5 0xA0C6 - device pci 1f.3 on end # Intel HD audio 0xA0C8-A0CF + end + device ref hda on end end end diff --git a/src/mainboard/google/volteer/variants/lindar/overridetree.cb b/src/mainboard/google/volteer/variants/lindar/overridetree.cb index e16012d..5f0f290 100644 --- a/src/mainboard/google/volteer/variants/lindar/overridetree.cb +++ b/src/mainboard/google/volteer/variants/lindar/overridetree.cb @@ -19,11 +19,12 @@ [PchSerialIoIndexI2C5] = PchSerialIoPci, }" device domain 0 on - device pci 07.0 off end # TBT_PCIe0 0x9A23 - device pci 07.1 off end # TBT_PCIe1 0x9A25 - device pci 07.2 off end # TBT_PCIe2 0x9A27 - device pci 07.3 off end # TBT_PCIe3 0x9A29 - device pci 15.0 on + # Baseboard has these on, so they must be disabled here. + device ref tbt_pcie_rp0 off end + device ref tbt_pcie_rp1 off end + device ref tbt_dma0 off end + + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -36,8 +37,8 @@ register "property_list[0].integer" = "1" device i2c 1a on end end - end # I2C0 - device pci 15.1 on + end + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -59,9 +60,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 14 on end end - end # I2C1 - device pci 15.2 off end # I2C2 0xA0EA - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -70,6 +70,6 @@ register "probed" = "1" device i2c 15 on end end - end # I2C5 0xA0C6 + end end end diff --git a/src/mainboard/google/volteer/variants/malefor/overridetree.cb b/src/mainboard/google/volteer/variants/malefor/overridetree.cb index 1dc6c2b..64b15b3 100644 --- a/src/mainboard/google/volteer/variants/malefor/overridetree.cb +++ b/src/mainboard/google/volteer/variants/malefor/overridetree.cb @@ -26,11 +26,12 @@ }"
device domain 0 on - device pci 07.0 off end # TBT_PCIe0 0x9A23 - device pci 07.1 off end # TBT_PCIe1 0x9A25 - device pci 07.2 off end # TBT_PCIe2 0x9A27 - device pci 07.3 off end # TBT_PCIe3 0x9A29 - device pci 15.0 on + # Baseboard has these on, so they must be disabled here. + device ref tbt_pcie_rp0 off end + device ref tbt_pcie_rp1 off end + device ref tbt_dma0 off end + + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -43,8 +44,8 @@ register "property_list[0].integer" = "1" device i2c 1a on end end - end # I2C0 - device pci 15.1 on + end + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -61,8 +62,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 5d on end end - end # I2C1 - device pci 15.2 on + end + device ref i2c3 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" @@ -93,8 +94,8 @@ register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end end - end # I2C2 0xA0EA - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -103,14 +104,14 @@ register "probed" = "1" device i2c 15 on end end - end # I2C5 0xA0C6 - device pci 1f.3 on + end + device ref hda on chip drivers/generic/max98357a register "hid" = ""MX98357A"" register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" register "sdmode_delay" = "5" device generic 0 on end end - end # Intel HD audio + end end end diff --git a/src/mainboard/google/volteer/variants/terrador/overridetree.cb b/src/mainboard/google/volteer/variants/terrador/overridetree.cb index 95f1f8a..1ccdb87 100644 --- a/src/mainboard/google/volteer/variants/terrador/overridetree.cb +++ b/src/mainboard/google/volteer/variants/terrador/overridetree.cb @@ -17,7 +17,7 @@ register "SaGv" = "SaGv_Disabled"
device domain 0 on - device pci 15.0 on + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -51,8 +51,8 @@ probe AUDIO MAX98373_ALC5682I_I2S_UP4 end end - end # I2C #0 0xA0E8 - device pci 15.1 on + end + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -82,8 +82,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end - end # I2C1 0xA0E9 - device pci 15.2 on + end + device ref i2c2 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" @@ -114,8 +114,8 @@ register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end end - end # I2C2 0xA0EA - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/hid register "generic.hid" = ""ELAN2700"" register "generic.desc" = ""ELAN Touchpad"" @@ -125,8 +125,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end - end # I2C5 0xA0C6 - device pci 1f.2 hidden + end + device ref pmc hidden # The pmc_mux chip driver is a placeholder for the # PMC.MUX device in the ACPI hierarchy. chip drivers/intel/pmc_mux @@ -147,6 +147,6 @@ end end end - end # PMC + end end end diff --git a/src/mainboard/google/volteer/variants/todor/overridetree.cb b/src/mainboard/google/volteer/variants/todor/overridetree.cb index 95f1f8a..1ccdb87 100644 --- a/src/mainboard/google/volteer/variants/todor/overridetree.cb +++ b/src/mainboard/google/volteer/variants/todor/overridetree.cb @@ -17,7 +17,7 @@ register "SaGv" = "SaGv_Disabled"
device domain 0 on - device pci 15.0 on + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -51,8 +51,8 @@ probe AUDIO MAX98373_ALC5682I_I2S_UP4 end end - end # I2C #0 0xA0E8 - device pci 15.1 on + end + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -82,8 +82,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end - end # I2C1 0xA0E9 - device pci 15.2 on + end + device ref i2c2 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" @@ -114,8 +114,8 @@ register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end end - end # I2C2 0xA0EA - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/hid register "generic.hid" = ""ELAN2700"" register "generic.desc" = ""ELAN Touchpad"" @@ -125,8 +125,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end - end # I2C5 0xA0C6 - device pci 1f.2 hidden + end + device ref pmc hidden # The pmc_mux chip driver is a placeholder for the # PMC.MUX device in the ACPI hierarchy. chip drivers/intel/pmc_mux @@ -147,6 +147,6 @@ end end end - end # PMC + end end end diff --git a/src/mainboard/google/volteer/variants/trondo/overridetree.cb b/src/mainboard/google/volteer/variants/trondo/overridetree.cb index d7c0b7a..d18bb10 100644 --- a/src/mainboard/google/volteer/variants/trondo/overridetree.cb +++ b/src/mainboard/google/volteer/variants/trondo/overridetree.cb @@ -2,7 +2,7 @@ register "SaGv" = "SaGv_Disabled"
device domain 0 on - device pci 15.1 on + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -32,8 +32,8 @@ register "hid_desc_reg_offset" = "0x01" device i2c 10 on end end - end # I2C1 0xA0E9 - device pci 15.2 on + end + device ref i2c2 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" @@ -64,8 +64,8 @@ register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end end - end # I2C2 0xA0EA - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -74,6 +74,6 @@ register "probed" = "1" device i2c 15 on end end - end # I2C5 0xA0C6 + end end end diff --git a/src/mainboard/google/volteer/variants/volteer/overridetree.cb b/src/mainboard/google/volteer/variants/volteer/overridetree.cb index 2ef9fc9..5079493 100644 --- a/src/mainboard/google/volteer/variants/volteer/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volteer/overridetree.cb @@ -48,8 +48,8 @@ register "IomTypeCPortPadCfg[1]" = "0x090E000D"
device domain 0 on - device pci 05.0 on end # IPU 0x9A19 - device pci 15.0 on + device ref ipu on end + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -86,7 +86,7 @@ end end end - device pci 15.1 on + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -135,8 +135,8 @@ register "key.label" = ""pen_eject"" device generic 0 on end end - end # I2C1 0xA0E9 - device pci 15.2 on + end + device ref i2c2 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" @@ -167,8 +167,8 @@ register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end end - end # I2C2 0xA0EA - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -177,8 +177,8 @@ register "probed" = "1" device i2c 15 on end end - end # I2C5 0xA0C6 - device pci 1f.3 on + end + device ref hda on chip drivers/generic/max98357a register "hid" = ""MX98357A"" register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" @@ -208,7 +208,7 @@ end end end - device pci 1f.2 hidden + device ref pmc hidden # The pmc_mux chip driver is a placeholder for the # PMC.MUX device in the ACPI hierarchy. chip drivers/intel/pmc_mux @@ -241,6 +241,6 @@ end end end - end # PMC + end end end diff --git a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb index 2f5d26d..f8dcd58 100644 --- a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb @@ -6,7 +6,7 @@ register "DdiPort2Hpd" = "0"
device domain 0 on - device pci 04.0 on + device ref dptf on chip drivers/intel/dptf ## Active Policy register "policies.active" = "{ @@ -43,8 +43,8 @@ device generic 0 on end end end # DPTF 0x9A03 - device pci 05.0 on end # IPU 0x9A19 - device pci 15.0 on + device ref ipu on end # IPU 0x9A19 + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -81,7 +81,7 @@ end end end - device pci 15.1 on + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -130,8 +130,8 @@ register "key.label" = ""pen_eject"" device generic 0 on end end - end # I2C1 0xA0E9 - device pci 15.2 on + end + device ref i2c2 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" @@ -162,8 +162,8 @@ register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end end - end # I2C2 0xA0EA - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -172,8 +172,8 @@ register "probed" = "1" device i2c 15 on end end - end # I2C5 0xA0C6 - device pci 1f.3 on + end + device ref hda on chip drivers/generic/max98357a register "hid" = ""MX98357A"" register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" @@ -203,7 +203,7 @@ end end end - device pci 1f.2 hidden + device ref pmc hidden # The pmc_mux chip driver is a placeholder for the # PMC.MUX device in the ACPI hierarchy. chip drivers/intel/pmc_mux @@ -236,6 +236,6 @@ end end end - end # PMC + end end end diff --git a/src/mainboard/google/volteer/variants/voxel/overridetree.cb b/src/mainboard/google/volteer/variants/voxel/overridetree.cb index 330d852..8ce6875 100644 --- a/src/mainboard/google/volteer/variants/voxel/overridetree.cb +++ b/src/mainboard/google/volteer/variants/voxel/overridetree.cb @@ -13,7 +13,7 @@ }"
device domain 0 on - device pci 04.0 on + device ref dptf on chip drivers/intel/dptf ## Active Policy register "policies.active" = "{ @@ -61,8 +61,8 @@
device generic 0 on end end - end # DPTF 0x9A03 - device pci 15.0 on + end + device ref i2c0 on chip drivers/i2c/generic register "hid" = ""10EC5682"" register "name" = ""RT58"" @@ -94,8 +94,8 @@ device i2c 32 on end end - end # I2C #0 0xA0E8 - device pci 15.1 on + end + device ref i2c1 on chip drivers/i2c/hid register "generic.hid" = ""GDIX0000"" register "generic.desc" = ""Goodix Touchscreen"" @@ -139,8 +139,8 @@ register "has_power_resource" = "1" device i2c 39 on end end - end # I2C1 0xA0E9 - device pci 15.2 on + end + device ref i2c2 on chip drivers/i2c/sx9310 register "desc" = ""SAR0 Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" @@ -171,8 +171,8 @@ register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end end - end # I2C2 0xA0EA - device pci 19.1 on + end + device ref i2c5 on chip drivers/i2c/generic register "hid" = ""ELAN0000"" register "desc" = ""ELAN Touchpad"" @@ -181,8 +181,8 @@ register "probed" = "1" device i2c 15 on end end - end # I2C5 0xA0C6 - device pci 1f.2 hidden + end + device ref pmc hidden # The pmc_mux chip driver is a placeholder for the # PMC.MUX device in the ACPI hierarchy. chip drivers/intel/pmc_mux @@ -203,6 +203,6 @@ end end end - end # PMC + end end end