HAOUAS Elyes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/44392 )
Change subject: {soc/intel/common,sb/intel/lynxpoint}/hda_verb.c: Reduce differences ......................................................................
{soc/intel/common,sb/intel/lynxpoint}/hda_verb.c: Reduce differences
Change-Id: Ie63d7671eb19f0d4c4f67dfe242193e7949afdea Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- M src/soc/intel/common/hda_verb.c M src/southbridge/intel/lynxpoint/hda_verb.c 2 files changed, 29 insertions(+), 44 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/92/44392/1
diff --git a/src/soc/intel/common/hda_verb.c b/src/soc/intel/common/hda_verb.c index 6c0ace7..80ac489 100644 --- a/src/soc/intel/common/hda_verb.c +++ b/src/soc/intel/common/hda_verb.c @@ -22,9 +22,7 @@ reg32 |= val; write32(port, reg32);
- /* Wait for readback of register to - * match what was just written to it - */ + /* Wait for readback of register to match what was just written to it */ count = 50; do { /* Wait 1ms based on BKDG wait time */ @@ -83,18 +81,16 @@ }
/* - * Wait 50usec for the codec to indicate it is ready - * no response would imply that the codec is non-operative + * Wait 50usec for the codec to indicate it is ready. + * No response would imply that the codec is non-operative. */ static int hda_wait_for_ready(u8 *base) { - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - + /* Use a 50 usec timeout - the Linux kernel uses the same duration */ int timeout = 50;
while (timeout--) { - u32 reg32 = read32(base + HDA_ICII_REG); + u32 reg32 = read32(base + HDA_ICII_REG); if (!(reg32 & HDA_ICII_BUSY)) return 0; udelay(1); @@ -104,27 +100,23 @@ }
/* - * Wait 50usec for the codec to indicate that it accepted - * the previous command. No response would imply that the code - * is non-operative + * Wait 50usec for the codec to indicate that it accepted the previous command. + * No response would imply that the code is non-operative. */ static int hda_wait_for_valid(u8 *base) { u32 reg32; + /* Use a 50 usec timeout - the Linux kernel uses the same duration */ + int timeout = 50;
/* Send the verb to the codec */ reg32 = read32(base + HDA_ICII_REG); reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID; write32(base + HDA_ICII_REG, reg32);
- /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; while (timeout--) { reg32 = read32(base + HDA_ICII_REG); - if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == - HDA_ICII_VALID) + if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID) return 0; udelay(1); } diff --git a/src/southbridge/intel/lynxpoint/hda_verb.c b/src/southbridge/intel/lynxpoint/hda_verb.c index 6017d56..85fde86 100644 --- a/src/southbridge/intel/lynxpoint/hda_verb.c +++ b/src/southbridge/intel/lynxpoint/hda_verb.c @@ -4,10 +4,11 @@ #include <device/azalia_device.h> #include <device/mmio.h> #include <delay.h> + #include "pch.h" #include "hda_verb.h"
-/** +/* * Set bits in a register and wait for status */ static int set_bits(void *port, u32 mask, u32 val) @@ -22,9 +23,7 @@ reg32 |= val; write32(port, reg32);
- /* Wait for readback of register to - * match what was just written to it - */ + /* Wait for readback of register to match what was just written to it */ count = 50; do { /* Wait 1ms based on BKDG wait time */ @@ -39,7 +38,7 @@ return 0; }
-/** +/* * Probe for supported codecs */ int hda_codec_detect(u8 *base) @@ -69,19 +68,17 @@ return 0; }
-/** - * Wait 50usec for the codec to indicate it is ready - * no response would imply that the codec is non-operative +/* + * Wait 50usec for the codec to indicate it is ready. + * No response would imply that the codec is non-operative. */ static int hda_wait_for_ready(u8 *base) { - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - + /* Use a 50 usec timeout - the Linux kernel uses the same duration */ int timeout = 50;
while (timeout--) { - u32 reg32 = read32(base + HDA_ICII_REG); + u32 reg32 = read32(base + HDA_ICII_REG); if (!(reg32 & HDA_ICII_BUSY)) return 0; udelay(1); @@ -90,28 +87,24 @@ return -1; }
-/** - * Wait 50usec for the codec to indicate that it accepted - * the previous command. No response would imply that the code - * is non-operative +/* + * Wait 50usec for the codec to indicate that it accepted the previous command. + * No response would imply that the code is non-operative. */ static int hda_wait_for_valid(u8 *base) { u32 reg32; + /* Use a 50 usec timeout - the Linux kernel uses the same duration */ + int timeout = 50;
/* Send the verb to the codec */ reg32 = read32(base + HDA_ICII_REG); reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID; write32(base + HDA_ICII_REG, reg32);
- /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; while (timeout--) { reg32 = read32(base + HDA_ICII_REG); - if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == - HDA_ICII_VALID) + if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID) return 0; udelay(1); } @@ -119,7 +112,7 @@ return -1; }
-/** +/* * Find a specific entry within a verb table * * @param verb_table_bytes: verb table size in bytes @@ -148,7 +141,7 @@ const u32 *verb_table_data, u32 viddid, const u32 **verb) { - int idx=0; + int idx = 0;
while (idx < (verb_table_bytes / sizeof(u32))) { u32 verb_size = 4 * verb_table_data[idx+2]; // in u32 @@ -164,7 +157,7 @@ return 0; }
-/** +/* * Write a supplied verb table */ int hda_codec_write(u8 *base, u32 size, const u32 *data) @@ -184,7 +177,7 @@ return 0; }
-/** +/* * Initialize codec, then find the verb table and write it */ int hda_codec_init(u8 *base, int addr, int verb_size, const u32 *verb_data)