Furquan Shaikh has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32268
Change subject: mb/google/hatch: Configure reset config to PLTRST for IOAPIC pads ......................................................................
mb/google/hatch: Configure reset config to PLTRST for IOAPIC pads
This change configures reset config for all pads routed to IOAPIC as PLTRST. This is required to ensure that the internal logic of the GPIO gets reset any time the platform enters S3 or powers off and avoids any interrupt storms on boot-up.
BUG=b:129933011 TEST=Verified that there are no interrupt storms on boot-up from S5.
Change-Id: Ib790280c9f1410fa18746d4d7d2a5027afd7585b Signed-off-by: Furquan Shaikh furquan@google.com --- M src/mainboard/google/hatch/variants/baseboard/gpio.c 1 file changed, 7 insertions(+), 7 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/68/32268/1
diff --git a/src/mainboard/google/hatch/variants/baseboard/gpio.c b/src/mainboard/google/hatch/variants/baseboard/gpio.c index 0391dfe..1c8cfba 100644 --- a/src/mainboard/google/hatch/variants/baseboard/gpio.c +++ b/src/mainboard/google/hatch/variants/baseboard/gpio.c @@ -20,14 +20,14 @@
static const struct pad_config gpio_table[] = { /* A0 : SAR0_INT_ODL */ - PAD_CFG_GPI_APIC(GPP_A0, NONE, DEEP, LEVEL, NONE), + PAD_CFG_GPI_APIC(GPP_A0, NONE, PLTRST, LEVEL, NONE), /* A1 : ESPI_IO0 */ /* A2 : ESPI_IO1 */ /* A3 : ESPI_IO2 */ /* A4 : ESPI_IO3 */ /* A5 : ESPI_CS# */ /* A6 : SAR1_INT_ODL */ - PAD_CFG_GPI_APIC(GPP_A6, NONE, DEEP, LEVEL, NONE), + PAD_CFG_GPI_APIC(GPP_A6, NONE, PLTRST, LEVEL, NONE), /* A7 : PP3300_SOC_A */ PAD_NC(GPP_A7, NONE), /* A8 : EMR_GARAGE_DET */ @@ -53,7 +53,7 @@ /* A19 : WWAN_RADIO_DISABLE_1V8_ODL */ PAD_CFG_GPO(GPP_A19, 1, DEEP), /* A20 : M2_INT_L */ - PAD_CFG_GPI_APIC(GPP_A20, NONE, DEEP, LEVEL, NONE), + PAD_CFG_GPI_APIC(GPP_A20, NONE, PLTRST, LEVEL, NONE), /* * A21 : TRACKPAD_INT_ODL (wake) * TODO Combine into single gpio, when ITSS IPCx configuration @@ -147,7 +147,7 @@ * TODO Configure it back to invert mode, when * ITSS IPCx configuration is fixed in FSP. */ - PAD_CFG_GPI_APIC(GPP_C13, NONE, DEEP, LEVEL, NONE), + PAD_CFG_GPI_APIC(GPP_C13, NONE, PLTRST, LEVEL, NONE), /* C14 : BT_DISABLE_L */ PAD_CFG_GPO(GPP_C14, 1, DEEP), /* C15 : WWAN_DPR_SAR_ODL @@ -171,7 +171,7 @@ * TODO Configure it back to invert mode, when * ITSS IPCx configuration is fixed in FSP. */ - PAD_CFG_GPI_APIC(GPP_C21, NONE, DEEP, LEVEL, NONE), + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, NONE), /* C22 : EC_IN_RW_OD */ PAD_CFG_GPI(GPP_C22, NONE, DEEP), /* C23 : WLAN_PE_RST# */ @@ -210,7 +210,7 @@ /* D15 : TOUCHSCREEN_RST_L */ PAD_CFG_GPO(GPP_D15, 0, DEEP), /* D16 : USI_INT */ - PAD_CFG_GPI_APIC(GPP_D16, NONE, DEEP, LEVEL, NONE), + PAD_CFG_GPI_APIC(GPP_D16, NONE, PLTRST, LEVEL, NONE), /* D17 : PCH_HP_SDW_CLK */ PAD_NC(GPP_D17, NONE), /* D18 : PCH_HP_SDW_DAT */ @@ -457,7 +457,7 @@ * TODO Configure it back to invert mode, when * ITSS IPCx configuration is fixed in FSP. */ - PAD_CFG_GPI_APIC(GPP_C21, NONE, DEEP, LEVEL, NONE), + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, NONE), /* C23 : WLAN_PE_RST# */ PAD_CFG_GPO(GPP_C23, 1, DEEP), /* F2 : MEM_CH_SEL */