Antonello Dettori (dev@dettori.io) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16436
-gerrit
commit e4fcea9b6e27d51d900b447597121ff40999b29b Author: Antonello Dettori dev@dettori.io Date: Sat Sep 3 10:43:20 2016 +0200
cpu/amd/family_10h-family_15h: transition away from device_t
Replace the use of the old device_t definition inside cpu/amd/family_10h-family_15h.
Change-Id: Ia1b155eeb7b67d94cf7aaa7789843a3e4ed3497a Signed-off-by: Antonello Dettori dev@dettori.io --- src/cpu/amd/family_10h-family_15h/fidvid.c | 39 +++++++++++++++++---------- src/cpu/amd/family_10h-family_15h/init_cpus.c | 2 +- 2 files changed, 26 insertions(+), 15 deletions(-)
diff --git a/src/cpu/amd/family_10h-family_15h/fidvid.c b/src/cpu/amd/family_10h-family_15h/fidvid.c index 2e6e153..faf93d0 100644 --- a/src/cpu/amd/family_10h-family_15h/fidvid.c +++ b/src/cpu/amd/family_10h-family_15h/fidvid.c @@ -122,7 +122,7 @@ static void enable_fid_change(u8 fid) { u32 dword; u32 nodes; - device_t dev; + pci_devfn_t dev; int i;
nodes = get_nodes(); @@ -139,7 +139,8 @@ static void enable_fid_change(u8 fid) } }
-static void applyBoostFIDOffset(device_t dev, uint32_t nodeid) { +static void applyBoostFIDOffset(pci_devfn_t dev, uint32_t nodeid) +{ // BKDG 2.4.2.8 // Fam10h revision E only, but E is apparently not supported yet, therefore untested if ((cpuid_edx(0x80000007) & CPB_MASK) @@ -164,7 +165,8 @@ static void applyBoostFIDOffset(device_t dev, uint32_t nodeid) { } }
-static void enableNbPState1( device_t dev ) { +static void enableNbPState1(pci_devfn_t dev) +{ uint64_t cpuRev = mctGetLogicalCPUID(0xFF); if (cpuRev & AMD_FAM10_C3) { u32 nbPState = (pci_read_config32(dev, 0x1F0) & NB_PSTATE_MASK); @@ -184,7 +186,8 @@ static void enableNbPState1( device_t dev ) { } }
-static u8 setPStateMaxVal(device_t dev) { +static u8 setPStateMaxVal(pci_devfn_t dev) +{ u8 i, maxpstate=0; for (i = 0; i < NM_PS_REG; i++) { msr_t msr = rdmsr(PS_REG_BASE + i); @@ -204,7 +207,8 @@ static u8 setPStateMaxVal(device_t dev) { return maxpstate; }
-static void dualPlaneOnly( device_t dev ) { +static void dualPlaneOnly(pci_devfn_t dev) +{ // BKDG 2.4.2.7
uint64_t cpuRev = mctGetLogicalCPUID(0xFF); @@ -248,7 +252,8 @@ static int vidTo100uV(u8 vid) return voltage; }
-static void setVSRamp(device_t dev) { +static void setVSRamp(pci_devfn_t dev) +{ /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSRampTime] * If this field accepts 8 values between 10 and 500 us why * does page 324 say "BIOS should set this field to 001b." @@ -263,7 +268,7 @@ static void setVSRamp(device_t dev) { pci_write_config32(dev, 0xd8, dword); }
-static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) +static void recalculateVsSlamTimeSettingOnCorePre(pci_devfn_t dev) { u8 pviModeFlag; u8 highVoltageVid, lowVoltageVid, bValue; @@ -447,7 +452,8 @@ static u32 power_up_down(int node, u8 procPkg) { }
static void config_clk_power_ctrl_reg0(uint8_t node, uint64_t cpuRev, uint8_t procPkg) { - device_t dev = NODE_PCI(node, 3); + + pci_devfn_t dev = NODE_PCI(node, 3);
/* Program fields in Clock Power/Control register0 (F3xD4) */
@@ -471,7 +477,9 @@ static void config_clk_power_ctrl_reg0(uint8_t node, uint64_t cpuRev, uint8_t pr
}
-static void config_power_ctrl_misc_reg(device_t dev, uint64_t cpuRev, uint8_t procPkg) { +static void config_power_ctrl_misc_reg(pci_devfn_t dev, uint64_t cpuRev, + uint8_t procPkg) +{ /* check PVI/SVI */ uint32_t dword = pci_read_config32(dev, 0xa0);
@@ -504,7 +512,8 @@ static void config_power_ctrl_misc_reg(device_t dev, uint64_t cpuRev, uint8_t pr pci_write_config32(dev, 0xa0, dword); }
-static void config_nb_syn_ptr_adj(device_t dev, uint64_t cpuRev) { +static void config_nb_syn_ptr_adj(pci_devfn_t dev, uint64_t cpuRev) +{ /* Note the following settings are additional from the ported * function setFidVidRegs() */ @@ -526,7 +535,9 @@ static void config_nb_syn_ptr_adj(device_t dev, uint64_t cpuRev) { pci_write_config32(dev, 0xdc, dword); }
-static void config_acpi_pwr_state_ctrl_regs(device_t dev, uint64_t cpuRev, uint8_t procPkg) { +static void config_acpi_pwr_state_ctrl_regs(pci_devfn_t dev, uint64_t cpuRev, + uint8_t procPkg) +{ if (is_fam15h()) { /* Family 15h BKDG Rev. 3.14 D18F3x80 recommended settings */ pci_write_config32(dev, 0x80, 0xe20be281); @@ -594,7 +605,7 @@ static void prep_fid_change(void) { u32 dword; u32 nodes; - device_t dev; + pci_devfn_t dev; int i;
/* This needs to be run before any Pstate changes are requested */ @@ -809,7 +820,7 @@ static u32 needs_NB_COF_VID_update(void)
static u32 init_fidvid_core(u32 nodeid, u32 coreid) { - device_t dev; + pci_devfn_t dev; u32 vid_max; u32 fid_max = 0; u8 nb_cof_vid_update = needs_NB_COF_VID_update(); @@ -973,7 +984,7 @@ static void finalPstateChange(void) static void init_fidvid_stage2(u32 apicid, u32 nodeid) { msr_t msr; - device_t dev; + pci_devfn_t dev; u32 reg1fc; u32 dtemp; u32 nbvid; diff --git a/src/cpu/amd/family_10h-family_15h/init_cpus.c b/src/cpu/amd/family_10h-family_15h/init_cpus.c index 4405e3c..3c13e36 100644 --- a/src/cpu/amd/family_10h-family_15h/init_cpus.c +++ b/src/cpu/amd/family_10h-family_15h/init_cpus.c @@ -541,7 +541,7 @@ static u32 init_cpus(u32 cpu_init_detectedx, struct sys_info *sysinfo) static u32 is_core0_started(u32 nodeid) { u32 htic; - device_t device; + pci_devfn_t device; device = NODE_PCI(nodeid, 0); htic = pci_read_config32(device, HT_INIT_CONTROL); htic &= HTIC_ColdR_Detect;